Conference program MMC 2015

GmbH
© Turisme de Barcelona/L.Bertran
CiA
2nd international
Mobile Machine Control
(MMC) conference
Meistersingerhalle, Nuremberg (Germany)
June 09 - 10, 2015
Sponsor:
Softing Automotive
www.can-cia.org
2nd international MMC conference
MMC 2015
Welcome
to Nuremberg
The 2nd international Mobile Machine Control (MMC)
conference is going to take place in Nuremberg (Germany)
on June 9 and 10, 2015. Topics such as cloud diagnostic
and functional safety are on the conference agenda as
well as system design and code generation. Of course,
communication technology is also an important topic: One
session discusses Ethernet solutions and another one deals
with CAN FD, the next generation of CAN networks.
The conference addresses system designers of agriculture,
construction, forestry, and mining machines. In addition,
engineers developing mobile robots may be interested in
this event. Of course, the supplying industry is invited. The
MMC is a platform for discussions and networking with other
experts from the mobile machine industries.
The accompanying tabletop exhibition offers a platform for
discussions and networking with other international experts
from related work fields (e.g. CANopen, Isobus, J1939).
Holger Zeltwanger
MMC Program Committee
Program committee
◆◆
◆◆
◆◆
◆◆
Klaus Gnahm, Sensor-Technik Wiedemann
Alexander Holler, Inter Control
Peter Subke, Softing Automotive Electronics
Holger Zeltwanger, CAN in Automation
Conference location
Meistersingerhalle Nuremberg
Muenchener Str. 21
DE-90478 Nuremberg
www.meistersingerhalle.nuernberg.de
Registration
The registration fee includes a copy of the MMC proceedings.
Speakers/Co-speakers
Speakers may attend the conference free of charge. Please
note that co-speakers are not registered automatically. If they
do register, they pay a reduced fee.
Table-top exhibition
Access to the table-top exhibition is free of charge to
everyone.
Conference language
Please note that the conference is held in English language.
Cancelations
The fee minus 50 Euro handling will be refunded if the
cancelation was received by May 29, 2015. For cancelations
no refunds will be made after this date.
Registration
Please register either online at www.can-cia.org or by faxing
the registration form on the back.
2nd international MMC conference
MMC 2015
09:00
Tuesday, June 09, 2015
Tuesday, June 09, 2015
Registration of participants
Session III: Diagnostic
Session I: System design
Chair: Alexander Holler (Inter Control)
10:00
Open source software for automation and
other industries
n.n.
Chair: Peter Subke (Softing Automotive Electronics)
OBD concept as the core for a successful
stage IV application
Jens Schlenker, Frank Reuß
(HJS Emission Technology)
14:00
10.30
Improved management of CANopen-based
distributed control systems
Dr. Heiki Saha (TKE)
Intelligent diagnostic analyzer (IDA) - Introducing
machine intelligence in diagnostics
Ram Kumar Arunchachalam, Kapil G Krishnan
(VE Commercial Vehicles)
11:00
Coffee break
Coffee break
Session II: Network technology
Session IV: CAN FD
11:30
Real-time Ethernet in mobile machines
Stefan Taxer (B&R)
CAN FD data link layer and physical layer
Holger Zeltwanger (CiA)
15:30
12:00
Next generation Isobus
Franz Kraatz (FH Osnabrück)
16:00
12:30
Lunch break
Universal Service Data Object - A new
communication protocol for CANopen FD
Uwe Koppe (MicroControl)
CAN FD tools
Peter Fellmeth (Vector)
16:30
Chair: Uwe Koppe (MicroControl)
14:30
15:00
Chair: Klaus Gnahm (STW)
2nd international MMC conference
MMC 2015
Wednesday, June 10, 2015
Wednesday, June 10, 2015
Session V: Code generation
Session VII: Functional safety
09:30
Automated source code generation using ODX
Juan Aguilar (Sontheim)
14:00
10:00
Experiences on quick and cost-effective
translations from concept model to
production code
Mark Maessen (Brace Automotive)
CAN-based safety parameterisation as a
method for reducing the development effort
Dr. Rolf Jung (STW)
SIL-2 qualified IEC 61131-3 engineering platform
for mobile machines
Michael Schwarz (3S)
14:30
10.30
ODX-based flash solution for NRMM
control systems
Peter Subke (Softing Automotive Electronics)
Coffee break
15:00
Functional safety for commercial and off-road
vehicles, the challenges ahead
Bart Oosthoek (Brace Automotive)
15:30
Session VI: Cloud diagnostic
IEC 13849/ISO 26262 in one application
Dr. Peter Wratil (Innotec)
16:00
11:30
Outlook for on/off-board and cloud diagnostics
in commercial vehicles
Matthias Weber (Continental Engineering)
16:30
12:00
Who owns the data and who may use it?
Dr. Alexander Duisberg (Bird&Bird)
Why remote services are revolutionising
the market for mobile machinery
Dr. Hans Regler (Bauer Maschinen),
Dr. Michael Schmitt (STW)
12:30
Lunch break
Chair: Klaus Gnahm (STW)
11:00
Coffee break
Chair: Peter Subke (Softing Automotive Electronics)
Chair: Holger Zeltwanger (CAN in Automation)
2nd international MMC conference
CiA
members
Cospeakers
Nonmembers
Without German With German
VAT
VAT
early bird
300,00 €
357,00 €
on-site
360,00 €
428,40 €
early bird
200,00 €
238,00 €
on-site
250,00 €
297,50 €
early bird
400,00 €
476,00 €
on-site
480,00 €
571,20 €
Early bird rates till May 29, 2015
I would like to register for the MMC conference
I am a:
❑ Co-speaker
❑ CiA-member
❑ Non-member
Company:....................................................................
VAT:
....................................................................
Name:
....................................................................
Street:
....................................................................
ZIP/City: ....................................................................
Country: ....................................................................
Phone:
....................................................................
Email:
....................................................................
Date/signature: ............................................................
CiA reserves the right to change the agenda and/or
replace speakers.
Please return your registration form to:
CAN in Automation (CiA)
Phone: +49-911-928819-0
Kontumazgarten 3
Fax: +49-911-928819-79
DE-90429 Nuremberg
Email: [email protected]