k.sla 4 reliable heavy good transportation by kässbohrer

K.SLA 4
RELIABLE HEAVY GOOD TRANSPORTATION
BY KÄSSBOHRER
Kässbohrer’s extendable low-bed semi-trailer with 4 axles,
K.SLA 4, transcends the limits of engineering to provide reliable
performance in heavy good transportation. With 3-step side
extension brackets and 7 different sliding ramp options, K.SLA
4 enhances operational flexibility and eliminates idle workshop
time. Equipped with advanced load security features, K.SLA
4 offers enhanced maneuvering capability in the toughest
working conditions.
K.SLA 4 / 2N - 18 / 40
SPECIFICATION
L
PL
GL
SP
PH
H5
WB
W
FIXED AXLE
SELF STEERING AXLE
Technical Information
Chassis
Brake System
Electric System
Front Landing Gear
Rear Landing Gear
Tyres
Axle & Suspension
Floor
Side Extensions
Rear Ramps
Technical Data
High tension welded chassis made of ST52-3
Wabco EBS 4S/3M double circuit electro pneumatic brake system with RSS, spring-actuated
parking brake according to 71/320/EEC
2 x 7 + 1 x 15 pin plug socket according to 76/756/EEC along with 24 V
lighting installation
Jost 24 t mechanical landing gear
Manual foldable landing gear with 45 t static capacity
16 + 1 units 245/70 R 17.5 tyres with steel rims
2 Fixed and 2 self steering SAF 11 t load capacity axles with air suspension and drum brakes,
1st axle lifting with manual control from trailer
45 mm Hardwood with chequered steel plate over tyre sections
9 x 2 units of 300 mm galvanized steel side extensions brackets (gradually with 100 mm
extensions)
2 pieces, short, hydraulic foldable ramps with mechanical sliding and 45 mm hardwood
floor, ramp angle: 12°, capacity: 60 t
H5
WB
L
GL
PL
PH
W
SP
5th Wheel Height
Wheel Base
Overall Length
Gooseneck Length
Platform Length
Platform Height
Total Width
Sliding Platform Length
1.300 mm
8.405 mm
13.190 mm
3.950 mm
9.240 + 6.000 mm
890 mm
2.550 mm
300 mm
Technical Capacities
Tare Weight
Total Permissible Weight
(105 km/hr)
Total Permissible Weight
(80 km/hr)
Total Permissible Weight
(60 km/hr)
13.250 kg ±3%
58.000 kg
ENHANCED FEATURES
Product Range
For different customer needs, Kässbohrer Low-bed product family includes 3, 4 or 5 axle
extendable lowbed semi-trailers.
Wide Ramp Options
Semi-trailer can be equipped with 7 different ramp options:
- 3.390 mm mechanical or hydraulic sliding ramps made of hardwood or steel grid floor
- 4.260 mm hydraulic sliding ramps made of hardwood or steel grid floor
- Portable Aluminum ramps
Load Security
Semi-trailer is equipped with the following load security systems:
- 3 x 2 lashing rings with 6 t capacity on gooseneck section
- 4 x 2 lashing rings with 6 t capacity on platform section
- 8 x 2 lashing rings with 6 t capacity on side rave
Options for additional load security:
- 3 x 2 units of container locks (1 x 20 ft, 1 x 30 ft, 1 x 40 ft, 1 x 45 ft)
- 8 x 2 units of 42 mm x 62 mm side post pockets and pillars
Kässbohrer semi-trailers are manufactured according to lean production and quality principles in consideration of total cost of ownership.
Kässbohrer reserves the right to alter the product specification. Visual and the technical data subject to change according to vehicle configuration.
Kässbohrer Fahrzeugwerke GmbH Siemensstraße 74, 47574, Goch Deutschland | T 0049 2823 9721-0 | F 0049 2823 9721-21 | [email protected] | www.kaessbohrer.com
60.800 kg
64.100 kg