Document B105 – 2007 Standard Form of Agreement Between Owner and Architect

Transcription

Document B105 – 2007 Standard Form of Agreement Between Owner and Architect
Document B105 – 2007
TM
Standard Form of Agreement Between Owner and Architect for a Residential
or Small Commercial Project
AGREEMENT made as of the
in the year
(In words, indicate day, month and year.)
day of
BETWEEN the Owner:
(Name, legal status, address and other information)
This document has important legal
consequences. Consultation with
an attorney is encouraged with
respect to its completion or
modification.
and the Architect:
(Name, legal status, address and other information)
State or local law may impose
requirements on contracts for
home improvements. If this
document will be used for Work
on the Owner’s residence, the
Owner should consult local
authorities or an attorney to verify
requirements applicable to this
Agreement.
for the following Project:
(Name, location and detailed description)
The Owner and Architect agree as follows.
Init.
/
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
121710ACD44
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
1
ARTICLE 1 ARCHITECT’S RESPONSIBILITIES
The Architect shall provide architectural services for the Project as described in this Agreement in a manner consistent
with locally accepted standards for professional skill and care. The Architect shall assist the Owner in determining
consulting services required for the Project. The Architect’s services include the following consulting services, if any:
During the Design Phase, the Architect shall review the Owner’s scope of work, budget and schedule and reach an
understanding with the Owner of the Project requirements. Based on the approved Project requirements, the Architect
shall develop a design. Upon the Owner’s approval of the design, the Architect shall prepare Construction Documents
indicating requirements for construction of the Project and shall coordinate its services with any consulting services
the Owner provides. The Architect shall assist the Owner in filing documents required for the approval of
governmental authorities, in obtaining proposals and in awarding contracts for construction.
During the Construction Phase, the Architect shall act as the Owner’s representative and provide administration of the
Contract between the Owner and Contractor. The extent of the Architect’s authority and responsibility during
construction is described in AIA Document A105™–2007, Standard Form of Agreement Between Owner and
Contractor for a Residential or Small Commercial Project. Generally, the Architect’s services during construction
include interpreting the Contract Documents, reviewing the Contractor’s submittals, visiting the site, reviewing and
certifying payments, and rejecting nonconforming Work.
ARTICLE 2 OWNER’S RESPONSIBILITIES
The Owner shall provide full information about the objectives, schedule, constraints and existing conditions of the
Project, and shall establish a budget that includes reasonable contingencies and meets the Project requirements. The
Owner shall provide decisions and furnish required information as expeditiously as necessary for the orderly progress
of the Project. The Architect shall be entitled to rely on the accuracy and completeness of the Owner’s information.
The Owner shall furnish consulting services not provided by the Architect, but required for the Project, such as
surveying, which shall include property boundaries, topography, utilities, and wetlands information; geotechnical
engineering; and environmental testing services. The Owner shall employ a Contractor, experienced in the type of
Project to be constructed, to perform the construction Work and to provide price information.
ARTICLE 3 USE OF DOCUMENTS
Drawings, specifications and other documents prepared by the Architect are instruments of the Architect’s service and
are for the Owner’s use solely with respect to this Project. The Architect shall retain all common law, statutory and
other reserved rights, including the copyright. Upon completion of the Project or termination of this Agreement, the
Owner’s right to use the instruments of service shall cease. When transmitting copyright-protected information for use
on the Project, the transmitting party represents that it is either the copyright owner of the information, or has
permission from the copyright owner to transmit the information for its use on the Project.
ARTICLE 4 TERMINATION, SUSPENSION OR ABANDONMENT
In the event of termination, suspension or abandonment of the Project by the Owner, the Architect shall be
compensated for services performed. The Owner’s failure to make payments in accordance with this Agreement shall
be considered substantial nonperformance and sufficient cause for the Architect to suspend or terminate services.
Either the Architect or the Owner may terminate this Agreement after giving no less than seven days’ written notice if
the Project is suspended for more than 90 days, or if the other party substantially fails to perform in accordance with
the terms of this Agreement.
ARTICLE 5 MISCELLANEOUS PROVISIONS
This Agreement shall be governed by the law of the place where the Project is located. Terms in this Agreement shall
have the same meaning as those in AIA Document A105–2007, Standard Form of Agreement Between Owner and
Contractor for a Residential or Small Commercial Project. Neither party to this Agreement shall assign the contract as
a whole without written consent of the other.
Nothing contained in this Agreement shall create a contractual relationship with, or a cause of action in favor of, a
third party against either the Owner or the Architect.
Init.
/
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
2
The Architect and Architect’s consultants shall have no responsibility for the identification, discovery, presence,
handling, removal or disposal of, or exposure of persons to, hazardous materials in any form at the Project site.
ARTICLE 6 PAYMENTS AND COMPENSATION TO THE ARCHITECT
The Architect’s Compensation shall be:
The Owner shall pay the Architect an initial payment of
($
final invoice.
) as a minimum payment under this Agreement. The initial payment shall be credited to the
The Owner shall reimburse the Architect for expenses incurred in the interest of the Project, plus
percent (
%).
Payments are due and payable upon receipt of the Architect’s monthly invoice. Amounts unpaid
(
) days after the invoice date shall bear interest from the date payment is due at
the rate of
percent (
%), or in the absence thereof, at the
legal rate prevailing at the principal place of business of the Architect.
At the request of the Owner, the Architect shall provide services not included in Article 1 for additional compensation.
Such services may include providing or coordinating services of consultants not identified in Article 1; revisions due
to changes in the scope, quality or budget; evaluating changes in the Work and Contractors’ requests for substitutions
of materials or systems; and services not completed within
(
) months of the date
of this Agreement through no fault of the Architect.
ARTICLE 7 OTHER PROVISIONS
(Insert descriptions of other services and modifications to the terms of this Agreement.)
This Agreement entered into as of the day and year first written above.
OWNER (Signature)
ARCHITECT (Signature)
(Printed name and title)
(Printed name and title)
CAUTION: You should sign an original AIA Contract Document, on which this text appears in RED. An original assures that
changes will not be obscured.
Init.
/
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
3
Document B105™ – 2007 Instructions
Standard Form of Agreement Between Owner and Architect for a Residential
or Small Commercial Project
GENERAL INFORMATION
Purpose. AIA Document B105™–2007 is intended to be used for a residential or small commercial project that is
modest in size and brief in duration. For larger and more complex projects, other AIA agreements are more suitable,
such as AIA Document B104™–2007, Agreement Between Owner and Architect for a Project of Limited Scope. For
even larger or more complex projects, Owner/Architect agreements B101™–2007 or B103™–2007 are appropriate.
Related Documents. B105–2007 and AIA Document A105™–2007, Standard Form of Agreement Between Owner and
Contractor for a Residential or Small Commercial Project, comprise the Small Projects family of documents. Within a
document family, common definitions and parallel phrasing combine to form a consistent structure in support of all the
major contractual relationships on the construction project. B105 adopts A105 by reference as it sets forth the
Architect’s responsibilities during the Construction Phase.
Alternate Dispute Resolution (ADR) Methods. In order to maintain the condensed nature of this document, arbitration
and other ADR provisions are omitted, but the parties may include them under Article 7. Even if not included in the
agreement, the parties may agree to use ADR methods to resolve disputes instead of filing claims in court. For
information about various methods of dispute resolution, refer to The Construction Industry’s Guide to Dispute
Avoidance and Resolution, free online at www.adr.org.
Use of Non-AIA Forms. If a combination of AIA documents and non-AIA documents is to be used, particular care
must be taken to achieve consistency of language and intent. Of particular concern is the need for consistency between
the Owner-Architect Agreement and the anticipated General Conditions of the Contract for Construction in the
delineation of the Architect’s Construction Phase services and responsibilities.
Letter Forms of Agreement. Letter forms of agreement are generally discouraged by the AIA, as is the performance of
a part or the whole of professional services based on oral agreements or understandings. The standard AIA agreement
forms have been developed through more than 100 years of experience and have been tested repeatedly in the courts. In
addition, the standard forms have been carefully coordinated with other AIA documents.
Use of Current Documents. Prior to using any AIA Contract Document, users should consult www.aia.org or a local
AIA component to verify the most recent edition.
Reproductions. This document is a copyrighted work and may not be reproduced or excerpted from without the
express written permission of the AIA. There is no implied permission to reproduce this document, nor does
membership in The American Institute of Architects confer any further rights to reproduce this document.
This document is intended for use as a consumable—that is, the original document purchased is to be consumed in the
course of its use. This document may not be reproduced for project manuals. If a user wishes to include a sample or
samples of this document in a project manual, the normal practice is to purchase a quantity of the preprinted forms,
binding one in each of the manuals.
The AIA hereby grants the purchaser a limited license to reproduce a maximum of ten copies of a completed B105–2007,
but only for use in connection with a particular project. The AIA will not permit reproduction outside of the limited license
for reproduction granted above, except upon written request and receipt of written permission from the AIA.
Rights to reproduce the document may vary for users of AIA software. Licensed AIA software users should consult the
End User License Agreement (EULA).
To report copyright violations of AIA Contract Documents, e-mail The American Institute of Architects’ legal counsel,
[email protected].
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
121710ACD44
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
1
CHANGES FROM THE PREVIOUS EDITION
AIA Document B105–2007 is the successor to AIA Document B155™–1993. B105 incorporates alterations proposed by
architects, contractors, owners, and consultants. Significant change is made to the document format to streamline and simplify
it by removing paragraph numbering. The following are some of the changes made to the contents from B155–1993.
Title. The title of this document is changed to be more specific about its potential uses.
Article 1. The Architect’s standard of care is revised. The description of the Architect’s responsibilities is rewritten for
clarity. A fill point is added for a description of any consulting services to be provided by the Architect.
Article 2. Language is added to the Owner’s responsibilities with respect to providing timely decisions and information,
and requiring the Owner to furnish consulting services required for the Project that are not provided by the Architect.
Article 3. The definition of the Architect’s instruments of service is now clarified as “drawings, specifications and other
documents” prepared by the Architect. Language is added providing that the Owner’s right to use the instruments of
service ceases upon completion of the Project and that transmission of copyright-protected information is authorized.
Article 4. An addition is made to provide for mutual termination upon seven days’ notice if the Project is suspended for
more than 90 days.
Article 5. A statement is added that nothing in the Agreement creates a contractual relationship with, or a cause of
action in favor of, a third party against the Owner or the Architect.
USING B105–2007
Modifications. Particularly with respect to professional or contractor licensing laws, building codes, taxes, monetary
and interest charges, arbitration, indemnification, format and font size, AIA Contract Documents may require
modification to comply with state or local laws. Users are encouraged to consult an attorney before completing or
modifying a document.
In a purchased paper AIA Contract Document, necessary modifications may be accomplished by writing or typing the
appropriate terms in the blank spaces provided on the document, or by attaching Supplementary Conditions, special
conditions or referenced amendments.
Modifications directly to purchased paper AIA Contract Documents may also be achieved by striking out language.
However, care must be taken in making these kinds of deletions.
Under NO circumstances should standard language be struck out to render it illegible. For example, users should not
apply blocking tape, correction fluid or Xs that would completely obscure text. Such practices may raise suspicion of
fraudulent concealment, or suggest that the completed and signed document has been tampered with. Both parties
should initial handwritten changes.
Using AIA software, modifications to insert information and revise the standard AIA text may be made as the software
permits.
By reviewing properly made modifications to a standard AIA Contract Document, parties familiar with that document
can quickly understand the essence of the proposed relationship. Commercial exchanges are greatly simplified and
expedited, good faith dealing is encouraged, and otherwise latent clauses are exposed for scrutiny.
AIA Contract Documents may not be retyped or electronically scanned. Retyping can introduce typographic errors and
cloud legal interpretation given to a standard clause. Furthermore, retyping and electronic scanning are not permitted
under the user’s limited license for use of the document, constitute the creation of a derivative work and violate the
AIA’s copyright.
Cover Page
Date. The date represents the date the Agreement becomes effective. It may be the date that an original oral agreement
was reached, the date the Agreement was originally submitted to the Owner, the date authorizing action was taken or the
date of actual execution. Professional services should not be performed prior to the effective date of the Agreement.
Parties. Parties to this Agreement should be identified using the full address and legal name under which the
Agreement is to be executed.
2
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
Project. The proposed project should be described in sufficient detail to identify (1) the official name or title of the
facility; (2) the location of the site, if known; (3) the proposed building type and usage; and (4) the size, capacity or
scope of the project.
Article 1 Architect’s Responsibilities
At the end of paragraph one, insert a description of any consulting services the Architect will provide.
Article 6 Payments and Compensation to the Architect
Insert the amount of, or the method for calculating, the Architect’s compensation. Some sample methods of computing
compensation are provided below:
Multiple of Direct Personnel Expense:
Compensation for services rendered by principals, employees and professional consultants shall be based
on a Multiple of Direct Personnel Expense. Direct Personnel Expense is the direct salaries of the architect’s
personnel engaged on the project and the portion of the cost of their mandatory and customary
contributions and benefits related thereto, such as employment taxes and other statutory employee benefits,
insurance, sick leave, holidays, vacations, pensions and similar contributions and benefits.
Professional Fee Plus Expenses:
Compensation shall be a Fixed Fee of ________ ($__), plus compensation for services rendered by
Principals, employees and professional consultants.
Stipulated Sum:
Compensation shall be a stipulated sum of ________ ($__).
Percentage of Construction Cost:
Compensation shall be based on ________ percent (__%) of Construction Cost. The Construction Cost
shall be the total cost or estimated cost to the Owner of all elements of the Project designed or specified by
the Architect and shall include the cost at current market rates of labor and materials furnished by the
Owner and equipment designed, specified, selected or specially provided for by the Architect, plus a
reasonable allowance for the Contractor’s overhead and profit. In addition, a reasonable allowance for
contingencies shall be included for market conditions at the time of bidding and for changes in the Work
during construction. The Construction Cost, however, does not include the compensation of the Architect
and Architect’s consultants, the costs of the land, rights-of-way, financing or other costs which are the
responsibility of the Owner.
After inserting the amount or method of compensation, insert the amount of the initial payment, which is to be
determined by the parties.
Insert the percentage amount of the administrative fee to be paid to the Architect for reimbursable expenses.
Insert the number of days at which interest on unpaid invoices will begin to accrue and the rate of interest agreed upon
or leave the interest rate blank to select the legal rate of interest.
Insert the number of months beyond which additional compensation shall be paid for services not completed through
no fault of the Architect.
Article 7 Other Provisions
Insert any modifications to the standard text of the document, if the modifications are not otherwise inserted elsewhere in the
document. For more information about modifying the document, refer to the Modifications section of these Instructions.
EXECUTING THE AGREEMENT
Persons executing AIA Document B105–2007 should indicate the capacity in which they are acting (i.e., president,
secretary, partner, etc.) and the authority under which they are executing the Agreement. Where appropriate, a copy of
the resolution authorizing the individual to act on behalf of the firm or entity should be attached.
AIA Document B105™ – 2007 (formerly B155™ – 1993). Copyright © 1993 and 2007 by The American Institute of Architects. All rights reserved.
WARNING: This AIA® Document is protected by U.S. Copyright Law and International Treaties. Unauthorized reproduction or distribution of this
AIA® Document, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible
under the law. Purchasers are permitted to reproduce ten (10) copies of this document when completed. To report copyright violations of AIA Contract
Documents, e-mail The American Institute of Architects’ legal counsel, [email protected].
3