Document 6495529

Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch
Deutschland · Österreich · Schweiz
HOW TO replace server USB token license with the TOKENLESS license
G/On server is running with the G/On USB server token inserted. Administrator wants to continue running
G/On server on the same hardware with TOKENLESS option.
This functionality is only available in G/On server version 3.4 and higher. If you are running 3.3.1 or older
version of G/On software, please upgrade your installation to 3.4 version using USB token license before
continuing with the TOKENLESS option.
TOKENLESS feature needs to be purchased separately, therefore make sure your license allows you to use
this feature.
NOTE: license number is case sensitive; CAPITAL letters and numbers must be always used.
Tokenless license number matches EDC serial of the server USB token. For more information, please refer
to section “How to find the EDC serial of server USB token”.
Steps below are only applicable to the described scenario. Please note: different “token to tokenless”
scenarios might require different procedures or steps to apply.
1. Stop Emcads service.
2. Navigate to the G/On installation folder (default c:\Program Files\Emcads\), make a backup of
eprofile and license files before continuing (e.g. copy them to another location). Only eprofile and
license files have to be restored in case something fails.
3. Start GOnBuilder and login
4. Make sure you have tokenless license number ready. If not, it is right time to refer to „HOW TO find
EDC serial of USB token” section.
5. Remove server USB token from the server.
6. Press “Activate license” button or go to File menu and choose “Renew license”.
7. You will be prompted to select your license type.
Giritech GmbH
Mariabrunnstr. 123
88097 Eriskirch
Germany
Geschäftsführer
HRB Nr.
Registergericht
Ust-Id-Nr.
Joachim Seibold
631818
Amtsgericht Ulm
DE 213 403 660
Voba Friedrichshafen eG
Kto 17 668 000 BLZ 651 901 10
BIC GENODES1VFN
IBAN DE58651901100017668000
fon
fax
mail
URL
+49 (0) 7541 971099-0
+49 (0) 7541 971099-99
[email protected]
www.giritech.de
Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch
Deutschland · Österreich · Schweiz
8. Choose “Use G/On License” and type in or paste your tokenless license number as shown in
example picture below:
9. Press OK and wait for license to be received.
10. Save and activate you configuration; close G/On Builder; start Emcads service.
11. Additionall step, not required: you can verify that your are running on tokenless version by making
sure USB server token is not inserted and that you can reopen G/On Builder.
HOW TO find the EDC serial of server USB token
Make sure USB server token is inserted before continuing.
1. In the GOnBuilder, go to File menu and click “Renew license”.
2. Wait for license to be received.
Giritech GmbH
Mariabrunnstr. 123
88097 Eriskirch
Germany
Geschäftsführer
HRB Nr.
Registergericht
Ust-Id-Nr.
Joachim Seibold
631818
Amtsgericht Ulm
DE 213 403 660
Voba Friedrichshafen eG
Kto 17 668 000 BLZ 651 901 10
BIC GENODES1VFN
IBAN DE58651901100017668000
fon
fax
mail
URL
+49 (0) 7541 971099-0
+49 (0) 7541 971099-99
[email protected]
www.giritech.de
Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch
Deutschland · Österreich · Schweiz
3. Go to Help menu and choose „Show Log“
4. In the G/On Builder log search for EDC serial, for e.g. 050662XXXXXXXX - this your server USB
token EDC serial, which will be used in tokenless procedure described above. Copy or write-down
the EDC serial.
5. Close the G/On Builder log. Do not close the G/On Builder and do not save configuration.
You can always find the G/On License number on the box he received with G/On or on the shipping
document.
Giritech GmbH
Mariabrunnstr. 123
88097 Eriskirch
Germany
Geschäftsführer
HRB Nr.
Registergericht
Ust-Id-Nr.
Joachim Seibold
631818
Amtsgericht Ulm
DE 213 403 660
Voba Friedrichshafen eG
Kto 17 668 000 BLZ 651 901 10
BIC GENODES1VFN
IBAN DE58651901100017668000
fon
fax
mail
URL
+49 (0) 7541 971099-0
+49 (0) 7541 971099-99
[email protected]
www.giritech.de