Document 6500583

Transcription

Document 6500583
How to get DDPs into your volumetric blender – a starting point by manufacturer
Ranco Fertiservice
Ranco has developed some key pieces of equipment to accommodate Wolf Trax DDPs over the years.
Whether you currently have a micronutrients bin suited to granular micronutrients, or no bin at all, Ranco is
willing to work with you in order to properly outfit your current system.
What exactly are your needs? Are you running only one micronutrient product and have a lot of space to
add a single micro bin? Or, are you working with multiple micronutrients and are short on space? Below are
a couple of easy solutions to bolt-on and go.
Single dry additive bins (Picture 1) are available at a cost of ~$3,400* including motor control unit and
controls. Electronics are typically an additional ~$500 - $1,000 above this.
Picture 1: Ranco Dry Additive Bin – Single Product
Double dry additive bins (Pictures 2 & 3) are also available at a cost of ~$6,800 including motor control units
and controls. Electronics are typically an additional $1,000- $2,000 above this.
Picture 2: Ranco Double Dry Additive Bins – Two Products
* All prices in USD unless otherwise mentioned
GROWING FORWARD
800 – ON E R ESEAR CH R OAD
P: 204.237.9653
WINNIPEG, MANITOBA, CANADA
F: 204.256.4493
w w w .w ol ft ra x. co m
R3T 6E3
Picture 3: Ranco Double Dry Additive Bins – On site 4 products
Ranco also has conversion kits available to retrofit existing granular micro bins. Cost on these kits is ~$1,000.
When switching your products over you are never alone. Ranco has developed Final Factor numbers for all
DDP materials and have the means to work with you should you require a specialized piece of equipment.
They will walk you through the setup with whatever your specific needs may be.
We encourage you to contact Ranco directly with questions regarding your specific blender.
Ranco Fertiservice Inc
P.O. Box 329
701 Hwy 71
Sioux Rapids, IA
50585
Ph: 1-712-283-2525
Fax: 1-712-283-2303
Email: [email protected]
http://www.rancofertiservice.com/index.html
GROWING FORWARD
800 – ON E R ESEAR CH R OAD
P: 204.237.9653
WINNIPEG, MANITOBA, CANADA
F: 204.256.4493
w w w .w ol ft ra x. co m
R3T 6E3
Rancan Fertilizer Systems
Rancan currently offers a converted granular micronutrient bin (Pictures 4 & 5) that is well suited to Wolf Trax
DDP products. Strictly a single product bin it comes in at a cost of ~$4,500-$5,000 CDN. Electronic
components are an additional ~$1,500-$2,000 CDN.
Picture 4: Rancan Converted Micronutrient Bin
Picture 5: Rancan Converted Micronutrient Bin Placement
GROWING FORWARD
800 – ON E R ESEAR CH R OAD
P: 204.237.9653
WINNIPEG, MANITOBA, CANADA
F: 204.256.4493
w w w .w ol ft ra x. co m
R3T 6E3
If your system was built by Rancan pre-1996 you may, in fact, have a Ranco blender. If this is the case you
have 2 options including a) purchasing a Rancan converted micro bin or b) purchasing a Ranco dry additive
feeder. Either should plug & play seamlessly into your operation.
For Rancan systems built post-1996 you should use the Rancan converted micro bins only.
If you have additional questions regarding your specific blending setup please contact Rancan and they will
be more than happy to walk you through your particular options.
Rancan Fertilizer Systems
1179 Kapelus Drive
West St. Paul
Winnipeg, MB
R4A 5A8
Ph: 1-204-663-1474
Fax: 1-204-661-5338
Email: [email protected]
http://www.rancanfertilizer.com/index.php
Yargus Manufacturing
Yargus blenders can be upgraded or modified to accommodate Wolf Trax DDP products. Pricing is subject to
the manufacturer and depends on your type and speed of volumetric blender.
We would encourage you to contact Yargus Manufacturing directly with questions regarding your specific
blender.
Yargus Manufacturing Inc
12285 East Main St.
P.O. Box 238
Marshall, IL
62441
Ph: 1-217-826-6352
Fax: 1-217-826-8551
Email: [email protected]
http://www.yargus.com/
GROWING FORWARD
800 – ON E R ESEAR CH R OAD
P: 204.237.9653
WINNIPEG, MANITOBA, CANADA
F: 204.256.4493
w w w .w ol ft ra x. co m
R3T 6E3