MB MAXPro Series Meltblown Cartridges

MB MAXPro Series Meltblown Cartridges
Westco’s MB MAXPro Series melt-blown polypropylene cartridges provide true depth
filtration with a graded density design to maximize dirt holding capacity resulting in fewer
change outs. Manufactured through an exclusive process that thermally bonds pure
polypropylene he center.
MB MAXPro Series Advantages
• A broad range chemical compatibility
• Graded density design allows higher dirt loading
which equals fewer change outs
• Multiple length cartridges minimize change out
time, available to fit competitive filter vessels
• Meets FDA Requirements
• Various End –Cap and O-ring options are available
• High flow rates with low pressure drops throughout
the micron range
FDA Listed Materials
Manufactured from materials which are listed for
food contact applications in Title 21 of the U.S. Code
of Federal Regulations
Micron Ratings
Purity
1,3,5,10,20,30,50,75,100
Filter cartridges are free of surfactants,
anti-static agents, binders, and adhesives.
Applications
Maximum Recommended
Operating Conditions
• Photographic Chemicals
•
•
•
•
•
D I Water
Plating Solutions
R.O. Prefiltration
Bleach
Potable Liquids
•
•
•
•
•
Dilute Acids & Alkalies
Water
Prefilter for Membranes
Oilfeild Fluids
Organic Acids & Solvents
Change Out P = 20 psid (2.1 bar)
P @ Ambient Temp: = 60 psi
Maximum Temperature = 180 F
Flow Rate = 10 gpm per 10” Length
Dimensions: 2-1/2” OD x 9.75” to 50”
How to Order:
MB MAXPro SERIES
Micron Rating
MBN = Nominal
MBH = High Efficiency
MBA = Absolute
EXAMPLE: MBN-10-30-2F
Length
End Cap
Gasket
1
9 = 9-3/4”
Blank = DOE
B = Buna N
3
10 = 10”
2F = 222/Fin
E = EPDM
5
19 = 19-1/2”
2C = 222/Cap
V = Viton
10
20 = 20”
2S = 222/Spring
T = Tef. Encap
20
29 = 29-1/4”
6F = 226/Fin
S = Silicone
30
30 = 30”
6C = 226/Cap
50
39 = 39”
6S = 226/Spring
75
40 = 40”
SSP = SOE Spring
100
50 = 50”
SCE =SOE Ext
(MB Nominal – 10 Micron – 30” Length – SOE #222/Fin)