How to use SS Tool with Mapinfo 1 (12)

Transcription

How to use SS Tool with Mapinfo 1 (12)
How to use SS Tool with Mapinfo
Open Mapinfo, then go to tools > Run Mapbaisc Program
Locate SS Tool.mbx
1 (12)
How to use SS Tool with Mapinfo
Open File and Create sectors
Locate the site database file
Note: SS Tool accepts specific file format (see SS Tool SiteData format).
2 (12)
How to use SS Tool with Mapinfo
Input the desired size for the sector and Font Size
Locate the Neighbour database file
Note: SS Tool accepts specific file format (see SS Tool Neigh format).
3 (12)
How to use SS Tool with Mapinfo
The sectors with corresponding BCCH ARFCN
4 (12)
How to use SS Tool with Mapinfo
5 (12)
BCCH Frequency search
Enter the ARFCN for SS Tool to Search
The Last & Next buttons can be used to display: BCCH ARFCN – 1 and BCCH ARFCN +1
How to use SS Tool with Mapinfo
The Colours indicate:
1. Red: Co-channel Sector
2. Green: Adjacent channel Sector (input ARFCN –1)
3. Blue: Adjacent channel Sector (input ARFCN +1)
6 (12)
How to use SS Tool with Mapinfo
Neighbour search
Use the mouse pointer to select the source cell
Select Display Neighbour
7 (12)
How to use SS Tool with Mapinfo
The Colours indicate:
1. Pink: Source Cell
2. Yellow: Neighbour Cells
8 (12)
How to use SS Tool with Mapinfo
9 (12)
Finding One way / Asymmetrical Neighbours:
Select OneWay Neighbours from the SS Tool menu
This process may take some time depending on the number of neighbour records.
How to use SS Tool with Mapinfo
10 (12)
One-way neighbours appear in the Oneway Neighbours Please Add browser once the status bar
reaches 100 %
To export the one-way neighbour file, go to the export option in Mapinfo.
How to use SS Tool with Mapinfo
Select the Oneway Neighbour Please add table and select export.
Specify the save to location and also select *.txt for obtaining text output
11 (12)
How to use SS Tool with Mapinfo
12 (12)
Layer Control
For error free functioning of SS Tool always keep the layers in the following sequence and if any new
layers are are required add them below these two layers.