[WCR-300S] How to Change the Wireless Network Name(SSID)

Comments

Transcription

[WCR-300S] How to Change the Wireless Network Name(SSID)
[WCR-300S] How to Change the Wireless Network Name(SSID)
WCR-300S firmware Ver. V5.07.48_cn_BUF03
English version interface is not available.
1. Launch Web Browser, enter http://192.168.11.1 in address bar and then press Enter. Then type
password as “admin” in “密碼”, then click ”確定”.
2. Click “進階設定”.
3. Click “無線網路設定” under page “無線基本設定”
- Behind “主要 SSID”, enter a wireless network name which you want to change.
- Click “確定” to save settings.
4. Settings Complete.

Similar documents