School of Engineering A Sample of

Transcription

School of Engineering A Sample of
School of Engineering
A Sample
of
Faculty Publications
and
Activities
2007 - 2009
Christian Bach
Visiting Assistant Professor
Technology Management
PUBLICATIONS
Thiesen, H.-J., and C. Bach (1990) "Target Detection Assay (TDA): A versatile procedure to determine
DNA binding sites as demonstrated on SP1 protein." Nucleic Acid Research18 (11): 3203-3209.
Thiesen, H.-J., and C. Bach (1991) "Determination of DNA Binding Specificities of Mutated Zinc Finger
Domains." FEBS LETTERS 283 (1): 23-26.
Thiesen, H.-J., and C. Bach (1991) "Transition Metals modulate DNA-Protein Interactions of SP1 Zinc
Finger Domains with its cognate Target Site." BBRC 176 (2): 551-557.
Thiesen, H.-J., and C. Bach (1993) "DNA Recognition of C2H2 Zinc-Finger Proteins." Annals New York
Academy of Sciences 684:246-249.
Bach, C., J. Zhang, and S. Belardo (2001) "Collaborative Networks." Proceedings of the Seventh
Americas Conference on Information Systems, August 2-5, Boston, MA, pp. 684-688.
Bach, C., and S. Belardo (2002) "Towards a Retrospective Embedded Research Methodology (RER)
for Inquiry into Real Business Situations." International Symposium on Research Methods,
August 8, Dallas, Texas.
Zhang, J., and C. Bach (2002) "Information Privacy: Comparing the Legal and Policy Framework of the
United States and Germany." Proceeding of the Third Annual Global Information Technology Management
Conference, June 23-25.
Bach, C., and S. Belardo (2003) "Scientific and Philosophical Aspects of Information and the
Relationships among Data, Information, and Knowledge." Proceedings of the Ninth Americas
Conference on Information Systems, August 4-6, Tampa, FL.
Bach, C., S. Belardo, and J. Zhang (2003) "Increase of Potential Intellectual Bandwidth in a Scientific
Community through Implementation of an End-User Information System." Proceedings of the
Thirty-Six Annual Hawaii International Conference on System Sciences, IEEE Computer Society
Press, Los Alamitos, CA, January 6-9. Nominated as Best Paper.
Bach, C., S. Belardo, and S. Faerman (2004) "Employing the Intellectual Bandwidth Model for
Measuring Value Creation in Collaborative Environments." Proceedings of the Thirty-Seventh Annual
Hawaii International Conference on System Sciences, IEEE Computer Society Press, Los Alamitos, CA,
January 5-8.
Zhang, J., Bach, C., Seol, I. (2008), 隐私信息:美国与德国立法与政策框架的比较 (Information privacy:
Comparing the legal and policy frameworks of the United States and Germany), 电子政务 E-government,
No. 5, 2008, Chinese Academy of Sciences, E-Government Press.
Bach, C., J. Sarkis, and J. Zhang (2009) “Toward the Use of Internal Marketing in Networks”,
International Journal of Business Excellence (IJBEX), Vol. 2, Issue 1, pp. 30-49.
Bach, C., S. Belardo, and J. Zhang (2009) “Case Study: Information Assimilation and Collaboration
in Scientific Communities”, Management Research News, Vol. 32, Issue 11.
Lama D., Chu Y.-L. and Bach C. (2009) “Treatment of Sickle Cell Anemia with induced Pluripotent Stem
(iPS) Cells” Northeast American Society of Engineering Education Conference at the University of
Bridgeport
April 3-4 (Poster).
Chu Y.-L. and Bach C. (2009) “Micro Database and Knowledge Management Systems (mDKMS™):
Part I” Northeast American Society of Engineering Education Conference at the University of Bridgeport
April 3-4
(Poster).
Chu Y.-L. and Bach C. (2009) “Micro Database and Knowledge Management Systems (mDKMS™) :
Part II” Northeast American Society of Engineering Education Conference at the University of Bridgeport
April 3-4 (Poster).
Lama D., Chu Y.-L. and Bach C. (2009) “rapid Target Detection Assay (rTDA)”
Northeast American Society of Engineering Education Conference at the University of Bridgeport April 3-4
(Poster).
Patel M., Lama D., Chu Y.-L. and Bach C. (2009) “Network Marketing in Science and Research”
Northeast American Society of Engineering Education Conference at the University of Bridgeport April 3-4
(Poster).
Hassan Bajwa
Assistant Professor
Electrical Engineering
PUBLICATIONS:
1.
2.
3.
Hassan Bajwa, Prabir Patra, Xingguo Xiong, “Nanotechnology Curriculum Initiative in
Connecticut“, 2009 Northeast American Society of Engineering Education Conference
(ASEE’09), Bridgeport, CT, Apr. 3-4, 2009.
Akshat C. Patel, Miral P. Vaghela, Hassan Bajwa and Prabir Patra, "Energy Harvesting for
Wireless Sensors using Patch Array", 2009 Northeast American Society of Engineering
Education Conference (ASEE’09), Bridgeport, CT, Apr. 3-4, 2009.
Isaac Macwan, Vignesh Veerapandian, Hasan Bajwa, Xingguo Xiong "VHDL Implementation
of High-Performance and Dynamically Configured Multi-Port Cache Memory", 2009
Northeast American Society of Engineering Education Conference (ASEE’09), Bridgeport, CT,
Apr. 3-4, 2009
4.
5.
Hassan Bajwa and Xinghao Chen, “Low-Power High-Performance and Dynamically
Reconfigured Multi-Port Cache Memory Architecture,” in the Proceedings of the IEEE
International Conference on Electrical Engineering, April 11-12, 2007, ISBN # 1424408938.
Xinghao Chen and Hassan Bajwa, “Energy-efficient dual-port cache architecture with
improved performances,” In IET Journal of Electronics Letters, Vol. 43, No. 1, pp. 12-13,
January 4, 2007, ISSN0013-5194.
SYNERGISTIC ACTIVITIES:
Designed and developed graduate level courses that encompass theory lectures and hands on lab experiments.
 Served as “Chair, best student paper award” in American Society for Engineering Education (ASEE).
Serving as organization committee member in Remote Engineering and Virtual Instrumentation (REV)
2009 conference. Member of professional societies such as Institute of Electrical and Electronics
Engineers (IEEE) and (ASEE).
 Member of nano curriculum formed by Connecticut department of higher education and supported by
Center of Advanced Technology (CCAT). Connecticut higher education formed this committee to
integrate continuously evolving Nano-Science to engineering and science curricula.
 Organized summer camp held annually at University of Bridgeport. This camp is designed to foster
students‟ interest in science and engineering technologies.
OTHER SIGNIFICANT PUBLICATIONS:
1. Hassan Bajwa and Xinghao Chen, “Area-Efficient Dual-Port Memory Architecture for Multi-Core
Processors,”, in the Proceedings of the JSC, pp. 49-50, April 2006, ISBN # 3902463-05-8.
2. Xiaoping Li, Xingguo Xiong, Hassan Bajwa, Prabir Patra “Implementation of a CMOS Wallace-tree
Multiplier” ", 2009 Northeast American Society of Engineering Education Conference (ASEE‟09),
Bridgeport, CT, Apr. 3-4, 2009.
3. Yan Han, Xingguo Xiong, Hassan Bajwa, “ A Low Power CMOS Comparator Using Logic Shut-down
Technique” , 2009 Northeast American Society of Engineering Education Conference (ASEE‟09),
Bridgeport, CT, Apr. 3-4, 2009.
4. Chintan Rajyaguru, Prabir Patra and Hassan Bajwa "Polymer-carbon nanotube biosensors",2009
Northeast American Society of Engineering Education Conference (ASEE‟09), Bridgeport, CT, Apr. 3-4,
2009.
5. Niveditha Mittapalli, Prabir Patra and Hassan Bajwa "Nano-engineered active matrix gel for targeted
drug delivery in liver finestration",2009 Northeast American Society of Engineering Education
Conference (ASEE‟09), Bridgeport, CT, Apr. 3-4, 2009.
CURRENT RESEARCH FOCUS:
Nano-structured Flexible Patch Antenna: Research is focused on developing and simulating a nanostructured flexible patch antenna array for multi frequency operations in Industrial, Scientific and Medical
(ISM) band. Patch antenna design has been simulated with cotton as a substrate and CNT as conductive
patch and ground plane. Exciting applications of such flexible patch antenna can be found in the fields of
wearable electronics, implantable biomedical antennas and devices.
Low Power Sensor Nodes: Current research efforts in designing low power sensor nodes focus on
improving battery life by using RF power to support wakeup mechanism of power efficient sensor node.
Low Power SRAM: Research is focused on implementing recently proposed low power dynamically
configured SRAM in deep-submicron technologies.
AWARDS & GRANT ACTIVITIES:
1. Honorable Mention Award, 2009, “Nanotechnology Curriculum Initiative in Connecticut” Hassan Bajwa,
Prabir Patra, Xingguo Xiong, Northeast American Society of Engineering Education Conference
(ASEE‟09), Bridgeport, CT, Apr. 3-4, 2009.
2. "A Bulk-micromachined MEMS Comb Vibratory Gyroscope" PI: Xingguo Xiong, Co-PI: Hassan Bajwa.
Status: Awarded $6900/1 year, Agency: Seed money grant awarded by University of Bridgeport.
3. "Area Efficient Synamically Configured Memory Design", PI: Hassan Bajwa Co-PI: Xingguo Xiong.
Status: Awarded $6600/1 year, Agency: Seed money grant awarded by University of Bridgeport.
4. “Nanotechnology Curriculum Integrating Undergraduate Education and Research”, PI: Hassan Bajwa
and Prabir Patra. Status: Pending $200,000/2 years, Agency: NSF
STUDENTS AND RESEARCH PROJECTS SUPPORTING STEM INITIATIVE:
Title:
Design of patch antenna for energy harvesting
Students:
Jasmine Martich, Akshat C. Patel, and Miral P. Vaghela
Title:
Modeling of Piezoelectric Sensor and Piezoelectric Actuators
Student:
Jose, Justin S. Esther, Teo.
TITLES OF COURSES TAUGHT IN THE LAST TWO YEARS:
2008 – 2009
Low Power VLSI, Analog VLSI and RF circuit Design
2007 – 2008
CMOS VLSI and C++ for Engineers
CURRENT AND PAST COLLABORATORS:
Navarun Gupta (UB) Prabir Patra (UB)
Xingguo Xiong (UB)
David Crouse(CUNY) Sohail Hussain (YALE)
Xinghao Chen (C
Buket D. Barkana
Assistant Professor
Department of Electrical Engineering
PUBLICATIONS
Journal Papers:
N. Gupta, Barkana B.D., L.V. Hmurcik, “Two real-life fatal burn cases including smoke inhalation
and power line burns”, Burns, 2009, (under review).
Barkana B.D., N. Gupta, L.V. Hmurcik, “Two Case Reports: Electro-thermal (aka contact) burns
and the effects of current density, application time, and skin resistance”, Burns, 2009, (under
review).
Barkana B.D., “Curriculum Development of a Voice/Audio Signal Processing Laboratory Course”,
IEEE Transactions on Education, 2008, (under review).
Barkana B.D., “Characteristics of AlGaAs/GaAs Heterostructure RT-SCR Model”, Microelectronics
Journal, Volume 39, Issue 12, December 2008, pages: 1504-1508.
Barkana B.D., Erkaya H.H., “A Model for the Resonant Tunneling Semiconductor Controlled
Rectifier”, Microelectronics Journal, Vol.38, pages: 871–876, 2007.
Conference Papers:
B.D. Barkana, S. Patel, N. Gupta, and L.V. Hmurcik, “USING REAL-LIFE CASES TO TEACH
STUDENTS ABOUT ELECTRIC BURNS Part II Contact Burns”, The Proceedings of the 2009
ASEE NE American Society for Engineering Education Conference, April 3-4, 2009.
B.D. Barkana, S. Patel, N. Gupta, and L. V. Hmurcik, “USING REAL-LIFE CASES TO TEACH
STUDENTS ABOUT ELECTRIC BURNS Part I Secondary burns”, The Proceedings of the 2009
ASEE NE American Society for Engineering Education Conference, April 3-4, 2009. (Best Paper
Nominee)
Zheng M., Xeing W., Barkana B.D., An automatic text-dependent speaker verification system
design using MATLAB”, The Proceedings of the 2009 ASEE NE American Society for Engineering
Education Conference, April 3-4, 2009. (Best Student Paper Nominee)
Yu L., Barkana B.D., “Speech Disorders: An analysis of hypernasal speech using signal processing
techniques”, The Proceedings of the 2009 ASEE NE American Society for Engineering Education
Conference, April 3-4, 2009. (Best Student Paper Nominee)
Barkana B.D., Gupta N., Hmurcik L.V., “Improving teaching tools and techniques of graduate
engineering courses based on students’ learning styles and multiple intelligences”, ASEE, San
Antonio, 2009, (accepted).
Yang J., Barkana B.D., “The Acoustic Properties of Different Noise Sources”, Proceedings of the
6th International Conference on Information Technology - New Generations, ITNG 2009.
Yu L., Barkana B.D., “Classifying Hypernasality Using the Pitch and Formants, Proceedings of the
6th International Conference on Information Technology - New Generations, ITNG 2009.
Bachu R.G., Kopparthi S., Adapa B., Barkana B.D., “Voiced/Unvoiced Decision for Speech Signals
Based on Zero-Crossing Rate and Energy”, IEEE International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering (CISSE'08).
Patel J., Bachu R.G., Barkana B.D., “A Comparison of LBG and ADPCM Speech Compression
Techniques”, IEEE International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CISSE'08).
Deepawale D.S., Bachu R., Barkana B.D., “Energy Estimation between Adjacent Formant
Frequencies to Identify Speakers’ Gender”, Proceedings of 5th International Conference on
Information Technology: New Generations (ITNG), 2008.
Barkana B.D. Barkana T., “Vector Transformation Effects of a Compression Algorithm Based on
the Polarity of the Speech Signal”, Proceedings of 5th International Conference on
Information Technology: New Generations (ITNG), 2008.
Bachu R., Deepawale D.S., Barkana B.D., L.V. Hmurcik “An Evaluation of Indian International
Graduate Students‟ Expectations and Experiences”, 2008 ASEE (The American Society for
Engineering Education) Annual Conference & Exposition, Jun. 22-24, Pittsburgh, PA, 2008. (This
paper is invited to 7th Annual ASEE Global Colloquium on Engineering Education, Cape Town,
South Africa, and October 19-23, 2008.)
Bachu R., Adapa B.K., Kopparthi S., Barkana B.D., “Separation of Voiced and Unvoiced Speech
Signals using Energy and Zero Crossing Rate”, ASEE Regional Conference, West Point, March
2008. (Best Student Paper Award, Second Place)
Deepawale D.S., Barkana B.D., “The acoustical properties of seven commonly encountered
background noises for digital signal processing applications”, ASEE Regional Conference, West
Point, March 2008.
Gupta N., Barkana B.D., Patel S., Hmurcik L.V., “Discussion on High Voltages & their Successful
Introduction in to the Engineering Class Room Using Real Life Accident Cases”, ASEE Regional
Conference, West Point, March 2008.
Barkana B.D. Barkana T., “A Simple Compression Algorithm Based on the Polarity of the Speech
Signal”, Proc. of IEEE International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CISSE'07), Dec. 3-12, 2007.
Barkana B.D., “Developing the instructors’ teaching techniques: Required Courses for Ph.D.
Candidates”, The 2007 ASEE New England American Society for Engineering Education
Conference, April 20-21 2007.
Stark B., “Dual Architecture Implementation of Acoustic Echo Cancellation”, Advisor: Barkana
B.D., the Proceedings of the 2009 ASEE NE American Society for Engineering Education
Conference, April 3-4, 2009, (Best Student Paper Honorable Mention Award).
Hirani N., Suhagiya V., “Speaker Identification System”, Advisor: Barkana B.D., ASEE NE
Conference, Bridgeport, April 3-4, 2009, Poster Presentation, (Best Student Poster Honorable
Mention Award).
Potla S., Deepawale D.S., “Acoustical Properties of seven commonly encounter background
noises”, Advisor: Barkana B.D., ASEE Regional Conference, West Point, March 2008, Poster
Presentation.
Bachu R., Deepawale D.S, “Emotional Speech Detection”, Advisor: Barkana B.D., ASEE Regional
Conference, West Point, March 2008, Poster Presentation, (Honorable Mention Award).
Deepawale D.S., Bachu R., “Speaker’s Gender Identification using Speech Signal Processing”,
Advisor: Barkana B.D., ASEE Regional Conference, West Point, March 2008, Poster Presentation.
SCIENTIFIC SERVICES
Conference Committee/Paper Review Chair: 2009 Northeast American Society of Engineering
Education Conference, Bridgeport, April 3-4, 2009.
Workshop Organizer/Chair: Title: Engineering Education in Grades 7-12, ASEE Northeast
Conference, April 3-4, 2009, Bridgeport, CT, USA
Program Committee Member:
5th International Conference on Information Technology: New Generations ITNG 2008
6th International Conference on Information Technology: New Generations ITNG 2009
Review Chair at ASEE Northeast Regional Conference, Bridgeport, April 3-4, 2009.
Session Organizer/Chair:
5th International Conference on Information Technology: New Generations, “Speech Signal
Processing Applications” Track at ITNG2008,
6th International Conference on Information Technology: New Generations, “Signal
Processing Applications” Track at ITNG2009.
Judge:
Poster Presentations at ASEE Zone 1 Conference 2008, West Point, NY,
Poster Presentations at ASEE NE Conference 2009, Bridgeport, CT,
Bridgeport Public Schools (BBOE) Science Expo 2009, Bridgeport
REVIEWER:
International REV (Remote Engineering and Virtual Instrumentation) Conference, Bridgeport,
USA, 2009.
116th ASEE Annual Conference and Exposition, 2009.
The First International Conference on Computer, Control & Communication (IC4), 2007.
IEEE International Joint Conferences on Computer, Information, and Systems Sciences, and
Engineering (CISSE'07), CISSE 2008.
5th International Conference on Information Technology: New Generations ITNG 2008,
ITNG 2009.
Advanced Technology for Learning, 2007, 2008.
ASEE Zone 1 Conference 2008, West Point, NY.
ASEE NE Conference 2009, Bridgeport, CT.
REV 2009 (Remote Engineering and Virtual Instrumentation) June 22-29, 2009.
UNIVERSITY SERVICES:
Organized Amistad Academy‟ s visit to SOE, University of Bridgeport, May 28, 2009.
Dean‟s Assistantship Award Committee, Fall 2008, Spring 2009.
Faculty Council Committee, Spring 2009.
Library Liaison for Fall 2008 and Spring 2009.
Organizer of the School of Engineering Colloquium Series for Fall 2008 and Spring 2009 at
University of Bridgeport.
Graduate Fellows Selection Committee, Fall 2008.
Admission committee member for Department of Electrical Engineering, University of Bridgeport:
09/2007-present. Review graduate admission files for Electrical Engineering department.
Served for student course registration for Department of Electrical Engineering: 2008- present.
Guided students in their course registration for each semester.
Served in new faculty recruitment process for Department of Electrical Engineering, 2007 –
present. Reviewed CVs from applicants for EE faculty position openings. Recommended
outstanding candidates to the department for consideration. Interviewed candidates and submitted
comments to the department and School of Engineering for consideration.
Prepared “International Student Survey for SOE, 2007-2008” at University of
Bridgeport. For this study, Dr. Barkana collaborated with the Division of Student
Affairs.
Julius Dichter
Associate Professor
Computer Science and Engineering
Spring 2009 - Reviewer of Cay Horstmann - Big Java, Wiley Publishers Summer 2009 Reviewer of Cay Horstmann - Java For Everyone, Wiley Publishers
Khaled Elleithy
Professor
Computer Science and Engineering
Grants:
 Principal Investigator, “Implementation and Performance Evaluation of Overlay End System
Multicast (ESM) for stable and Fast Streaming of Multimedia Applications,” University of
Bridgeport Seed Money Grants, $10,000, Fall 2009.
 Co-Investigator, “Hybrid Projectile Design,” U.S. Army Armament, Research, Development &
Engineering Center (ARDEC), $57,688, 8/1/2008 - 5/31/2009, funded.
 Co-Investigator, “Development, Demonstration and Deployment of Nanotechnology Enabled
Intelligent Unmanned Autonomous Vehicles (IUAVs),” In response to the solicitation:
Nanotechnologies, W15QKN-07-R-0210, $3,000,000, Pending.
Professional Activities:
Conference Chairman
 Chairman, International Joint Conferences, on Computer, Information, and Systems Sciences, and
Engineering, (CIS2E 08), December 2008, Virtual Conference.
 Chairman, International Joint Conferences, on Computer, Information, and Systems Sciences, and
Engineering, (CIS2E 07), December 2007, Virtual Conference.
Membership in Standing Committees
Member, IASTED Standing Technical Committee on Parallel and Distributed Computing and Systems. The
committee is responsible for the planning and organization of IASTED activities such as meetings and
publications.
Member, American Biographical Institute Research Board of Advisors. The American Biographical Institute
publishes the following biographical reference works since 1967:
The International Directory of Distinguished Leadership
The International Who's Who of Professional and Business Women
The Dictionary of Leading Americans and the World Who's Who of Women
Publications:
Books
1. Tarek Sobh, Khaled Elleithy, Ausif Mahmood, Novel Algorithms and Techniques in Telecommunications
and Networking, Springer, August 2009.
2. Kahled Elleithy, Advanced Techniques in Computing Sciences and Software Engineering, Springer,
August 2009.
3. Khaled Elleithy, Innovations in Systems, Computing Sciences and Software Engineering, Springer,
August 2008.
4. Tarek Sobh, Khaled Elleithy, Ausif Mahmood and Mohamed Karim, Advances in Automation, Industrial
Electronics and Telecommunications, Springer, August 2008.
5. Khaled Elleithy, Advances and Innovations in Systems, Computing Sciences and Software Engineering,
Springer, June 2007.
6. Tarek Sobh, Khaled Elleithy, Ausif Mahmood and Mohamed Karim, Innovative Algorithms and
Techniques in Automation, Industrial Electronics and Telecommunications, Springer, June 2007.
Book Chapters:
1. Aasia Riasat, Syed S. Rizvi, Khaled M. Elleithy, Farheen Zehara, and Faraz Arain, "The Role of System
Dynamics in Learning Environments," Advances in Automation, Industrial Electronics and
Telecommunications, Springer, June 2008
2. Syed S. Rizvi, Khaled M. Elleithy, Khushboo Patel, and Chaitali Patel, "Use of Self-Adaptive
Methodology in Wireless Sensor Networks for Reducing the Energy Consumption", Advances in in
Automation, Industrial Electronics and Telecommunications, Springer, June 2008
3. Syed S. Rizvi, Aasia Riasat, Muhammad S. Rashid, and Khaled M. Elleithy, "Bandwidth Problem in
High Performance Packet Switching Network," Innovations in Systems, Computing Sciences and
Software Engineering, Springer, June 2008.
4. Ajay Shrestha, Khaled M. Elleithy, and Syed S. Rizvi, "Investigating the effects of Encoder Schemes,
WFQ & SAD on VoIP QoS," Advances in Automation, Industrial Electronics and Telecommunications,
Springer, June 2008.
5. Aasia Riasat, Syed S. Rizvi, Khaled M. Elleithy, Faraz Arain, Rizwan M. Qureshi, "Dynamic Semantics
of the Web: Useful Toll for the New Generation Agent-Based Software," Advances in Automation,
Industrial Electronics and Telecommunications, Springer, June 2008.
6. Khurram M. Rajput, Khaled M. Elleithy, and Syed S. Rizvi, "A Novel Approach for Creating Consistent
Trust and Cooperation (CTC) among Mobile Nodes of Ad Hoc Network," Advances in Automation,
Industrial Electronics and Telecommunications, Springer, June 2008.
7. Syed S. Rizvi, K. M. Elleithy, Aasia Riasat, “Minimizing the Null Message Exchange in Conservative
Distributed Simulation,” Book Chapter, Innovative Algorithms and Techniques in Automation,
Industrial Electronics and Telecommunications, Springer, June 2007.
Journal Publications:
1. Mohamed A. Abuhelaleh, Khaled M. Elleithy, Thabet M. Mismar, “Clustered Hierarchy in Sensor
Networks: Performance and Security”, International journal of Network Security & Its Applications,
accepted for publication.
2. Jaiminkumar Gorasia, Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat,” The use of Orthogonal
Frequency Code Division (OFCD) Multiplexing in Wireless Mesh Network (WMN),” to be
published by Fourth-Generation (4G) Wireless Networks: Applications and Innovations, accepted
for publication.
3. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “A Low-Complexity Optimum Multiuser Receiver
for DS-CDMA Wireless Systems,” submitted to Journal of Communications (JCM).
4. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “Overlay Networks: A Better Approach to Improve
Bandwidth and End-to-End delay Performance,” submitted to Special Issue on Delay Tolerant
Networks, Architecture, and Applications, Journal of Communications (JCM).
5. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “IEEE 802.11 & Bluetooth Interference: Simulation
and Coexistence,” submitted to International journal of Computer Networks & Communications
(IJCNC).
6. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “Combining Private and Public Key Encryption
Techniques for Providing Extreme Secure Environment for an Academic Institution Application,”
submitted to International Journal of Network Security & Its Applications (IJNSA).
7. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “Optimizing the Performance of Null Message
Algorithm in Parallel and Discrete-Event Simulation,” submitted to Journal of Simulation (JOS).
8. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat “An Efficient Optimistic Time Management
Algorithm for Discrete-Event Simulation System,” submitted to International Journal of Simulation
Modeling (IJSM)
9. Syed S. Rizvi, Khaled M. Elleithy, Aasia Riasat, ”Efficient Routing Algorithm for Mesh-Hypercube
(M-H) Networks,” submitted to Journal of Communication and Computer (JCC)
10. Sobh, K. Elleithy and S. Patel, "Reverse Engineering of VLSI Chips: A Roadmap,'' In the Journal of
Engineering and Applied Sciences, Volume 2, number 2, pp 290-298, 2007.
Conference Publications:
1. Anil Mathew, Nithin Chandrababu, Khaled Elleithy, and Syed S. Rizvi, “IEEE 802.11 & Bluetooth
Interference: Simulation and Coexistence,” 7th Annual Conference on Communication Networks
and Services Research (CNSR2009), Moncton, New Brunswick, Canada, May 11 - 13, 2009.
2. Sarosh Patel, Khaled Elleithy, and Syed S. Rizvi, “Hierarchically Segmented Routing (HSR)
Protocol for MANET,” 6th International Conference on Information Technology: New Generations
ITNG 2009, April 27-29, 2009, Las Vegas, Nevada, USA, 2009.
3. Syed S. Rizvi, Khaled M. Elleithy and Aasia Riasat, “An Efficient Optimistic Time Management
Algorithms for Discrete-Event Simulation System,” 6th International Conference on Information
Technology: New Generations ITNG 2009, April 27-29, 2009, Las Vegas, Nevada, USA, 2009.
4. Syed S. Rizvi, Mustafa A. Khan, Aasia Riasat, and Khaled M. Elleithy, “Combining Private and
Public Key Encryption Techniques for Providing Extreme Secure Environment for an Academic
Institution Application,” 6th International Conference on Information Technology: New Generations
ITNG 2009, April 27-29, 2009, Las Vegas, Nevada, USA, 2009.
5. Syed S. Rizvi, Mustafa Khan, Khaled M. Elleithy, and Aasia Riasat, “Formulization of SNR for
Optimum Receiver in Synchronous DS-CDMA Systems,” 6th International Conference on
Information Technology: New Generations ITNG 2009, April 27-29, 2009, Las Vegas, Nevada,
USA, 2009.
6. Syed S. Rizvi, Mustafa Khan, Khaled M. Elleithy, and Aasia Riasat, “Low-Complexity Algorithm
for Improving the Computing Power of Multiuser Receivers for Next Generation Wireless Systems,”
6th International Conference on Information Technology: New Generations ITNG 2009, April 27-29,
2009, Las Vegas, Nevada, USA, 2009.
7. Gowrilakshmi Ponuratinam, Bhumika Patel, Syed S. Rizvi, and Khaled M. Elleithy, “Improvement
in the Spread Spectrum System in DSSS, FHSS, AND CDMA,” 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
8. Nilay Patel, Mayuresh Bhalekar, Pandya Nirav, Syed S. Rizvi, Khaled Elleithy, “Reducing Power
Consumption in Sensor Network Using Sensor MAC Protocol,” 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
9. Heven Patel, Hardik Patel, Aditya Jagannath, Syed S. Rizvi, Khaled Elleithy, "A Novel Simulation
Based Methodology for the Congestion Control in ATM Networks," 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
10. Gowrilakshmi Ponuratinam, Bhumika Patel, Syed S. Rizvi, and Khaled M. Elleithy, "Improvement
in the Spread Spectrum System in DSSS, FHSS, AND CDMA," 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
11. Muhammad Imran, Asif Shaikh, Syed S. Rizvi, Khaled M. Elleithy, "Performance Analysis of
Switches in High Speed LAN," 2009 ASEE Northeast Section Conference, University of Bridgeport,
Connecticut, April 3-4, 2009.
12. Mohamed A. Abuhelaleh, Khaled . M. Elleithy, and Thabet M. Mismar, “Routing in Sensor
Networks: Performance and Security in Clustered Networks,” 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
13. Syed Rizvi, Bevin Thomas, Khaled Elleithy, and Aasia Riasat, “A New Technique of Switch &
Feedback Job Scheduling Mechanism in a Distributed System,“ 2009 Spring Simulation
Multiconference (SpringSim'09), San Diego-Mission Valley; San Diego, CA, USA, March 22 - 27,
2009.
14. Bevin Thomas, Syed S. Rizvi, Khaled M. Elleithy, “Reducing Null Messages Using Grouping and
Status Retrieval for a Conservative Discrete-Event Simulation System,” 2009 Spring Simulation
Multiconference (SpringSim'09), San Diego-Mission Valley; San Diego, CA, USA, March 22 - 27,
2009.
15. Syed S. Rizvi, Hemen Patel, Khaled Elleithy, “Parallel and Distributed Algorithms and
Implementations: Time Based Mutual Exclusion,“ 2009 Spring Simulation Multiconference
(SpringSim'09), San Diego-Mission Valley; San Diego, CA, USA, March 22 - 27, 2009.
16. Syed Rizvi, Khaled Elleithy, and Aasia Riasat, “Analyzing SNR Performance of a Low-Complexity
Wireless Multiuser Receiver for DS-CDMA Systems,” 2nd IEEE International Conference on
Computer, Control & Communication (IEEE-IC4 2009), February 17-18, 2009, Karachi, Pakistan,
2009
17. Syed Rizvi, Khaled Elleithy, and Aasia Riasat, “A Low Complexity Optimum Multi-user Receiver
for Maximizing the BER Performance for DS-CDMA Systems,” 2nd IEEE International Conference
on Computer, Control & Communication (IEEE-IC4 2009), February 17-18, 2009, Karachi, Pakistan,
2009
18. Abdelrahman Elleithy, Syed S. Rizvi, and Khaled M. Elleithy, "Optimization and Job Scheduling in
Heterogeneous Networks," International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
19. Abdelrahman Elleithy, Syed S. Rizvi, and Khaled M. Elleithy, "Investigating the Effects of Trees
and Butterfly Barriers on the Performance of Optimistic GVT Algorithm," International Joint
Conferences on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08),
December 5 - 13, 2008.
20. Syed S. Rizvi, Majid A. Jafri, and Khaled Elleithy, "A Novel Optimization of the Distance Source
Routing (DSR) Protocol for the Mobile Ad Hoc Networks (MANET)," International Joint
Conferences on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08),
December 5 - 13, 2008.
21. Mohamed A. Abuhelaleh, Khaled . M. Elleithy, and Thabet M. Mismar “Modified LEACH –
Energy Efficient Wireless Networks Communication,” International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008..
22. Syed S. Rizvi, Shalini Poathan, and Khaled M. Elleithy, "A GVT Based Algorithm for Butterfly
Barrier in Parallel and Distributed Systems," International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
23. Jaiminkumar Gorasia, Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat," The use of Orthogonal
Frequency Code Division (OFCD) Multiplexing in Wireless Mesh Network (WMN)," to be
published by Fourth-Generation (4G) Wireless Networks: Applications and Innovations. A book
published by IGI Global (IDEA Group).
24. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy, "Performance Analysis of End System
Multicast," accepted at the 1st IEEE International Workshop on Future Multimedia Networking
(IEEE FNM 2008), Cardiff, Wales, September 18, 2008.
25. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy, "A Mathematical Model for Evaluating the
Performance of Multicast Systems," The 1st IEEE International Workshop on IP Multimedia
Communications (IPMC 2008) August 4 - 7, 2008, St. Thomas U.S. Virgin Islands in conjunction
17TH INTERNATIONAL CONFERENCE ON COMPUTER COMMUNICATIONS AND
NETWORKS (ICCCN), 2008.
26. Jalpa Bani, Syed S. Rizvi, and Khaled M. Elleithy, "A Secured Rijndael Implementation to
Withstand Cache Timing Attack Using Dynamic Cache Flushing (DCF) Algorithm," First IEEE
International Workshop on Security of Computer Communications and Networks (SoCCaN 2008)
August 4 - 7, 2008, St. Thomas U.S. Virgin Islands in conjunction with 17TH INTERNATIONAL
CONFERENCE ON COMPUTER COMMUNICATIONS AND NETWORKS (ICCCN), 2008.
27. Syed S. Rizvi, Aasia Riasat, Khaled M. Elleithy, and Mustafa Khan, "The Worst and Best case
Capacity Analysis of Mobile Ad Hoc Networks (MANET) using a 3-Phase Algorithm," The 5th
Annual IEEE Communications Society Conference on Sensor, Mesh and Ad hoc Communications
and Networks: IEEE SECON 2008. June 16-20, 2008, San Francisco Bay Area, 2008.
28. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy, "Reducing Null Message Traffic in Large
Parallel and Distributed Systems," 13th IEEE Symposium on Computers and Communications
(ISCC'08), July 6 - 9, 2008, Marrakech, Morocco. (Received Best Paper Award).
29. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "An Efficient Single Bit Store and Forward
(SBSF) Routing Algorithm for Mesh-Hypercube (M-H) Networks," The 2008 World Congress in
Computer Science, Computer Engineering, and Applied Computing WORLDCOMP'08. Las Vegas,
Navada. pp. 69 - 75, July 14 - 17, 2008.
30. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "A Closed Form Expression for BER of
Synchronous DS-CDMA Multi-user Detector," 9th IEEE Wireless Telecommunication Symposium
(IEEE WTS 2008), Pomona, California, pp. 110-114, April 24-26 2008.
31. Auf Akhtar, Syed S. Rizvi, and Khaled M. Elleithy, "A Novel Approach of Using Data Guard for
Disaster Recovery & Rolling Upgrades," ASEE Zone I Conference 2008, United State Military
Academy, West Point, NY March 28 - 29.
32. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "SNR Analysis of a Low-Complexity Wireless
Multiuser Receiver for DS-CDMA Systems," IEEE International Symposium on Wireless Pervasive
Computing (IEEE ISWPC-08) 2008, 7 - 9 May 2008 Santorini, Greece.
33. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "Transformation Matrix System for Reducing
the Computational Complexity of Wireless Multi-user Receivers for DS-CDMA Systems," 5th
International Conference on Information Technology: New Generations ITNG 2008, April 7-9, 2008,
Las Vegas, Nevada, USA.
34. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "A New Mathematical Model for Optimizing
the Performance of Parallel and Discrete Event Simulation Systems," 11th Communications and
Networking Simulation Symposium (CNS'08), Part of the 2008 Spring Simulation Multiconference
(SpringSim'08). April 14-16, 2008. Crowne Plaza Ottawa, Ottawa, Ontario
35. Sarosh Patel and Khaled Elleithy, "Hierarchically Segmented Routing Protocol for MANETs". In the
proceedings of the American Society for Engineering Education (ASEE 08) Zone I Conference,
United States Military Academy, West Point, New York, USA, March 2008.
36. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "Deterministic Formalization of the Processing
Gain for Reducing MAI in Wireless Multiuser DS-CDMA Systems," 5th Annual IEEE Consumer
Communications and Networking Conference (IEEE CCNC'2008), pp. 859 - 860, Las Vegas,
Nevada January 10 - 12, 2008.
37. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, "Use of Processing Gain to Suppress Multi
Access Interference (MAI) in CDMA Based Multiuser Receiver," International Wireless
communications and Mobile Computing Conference 2007 (IWCMC 2007), Honolulu, Hawaii,
August 12-16, 2007.
38. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, “Trees and Butterflies Barriers in Distributed
Simulation System: A Better Approach to Improve Latency and the Processor Idle Time”, IEEE
International Conference on Information and Emerging Technologies (IEEE ICIET-2007), pp. 1 – 6,
July 06-07, 2007, Karachi, Pakistan.
39. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, “The Impact of Reduced Computational
Complexity of Multiuser Detectors on the Processing Gain in a Wireless DS-CDMA Multiuser
System,” Proceedings of the 2007 International Conference on Wireless Networks (ICWN‟07). Part
of the 2007 World Congress in Computer Science, Computer Engineering, & Applied Computing
(Worldcomp‟07), pp. 70 – 76, Las Vegas, Nevada, USA, June 25-28, 2007.
40. Syed S. Rizvi, K. M. Elleithy, and Aasia Riasat, “Transformation Matrix Algorithm for Reducing the
Computational Complexity of Multiuser Receivers for DS-CDMA Wireless Systems,” Wireless
Telecommunication Symposium (WTS 2007), Pomona, California, April 26-28 2007.
41. K. M. Elleithy and A. Maqbool, “Implementations of Location Awareness Technologies and their
Applications” Wireless Telecommunication Symposium (WTS 2007), Pomona, California, April 2628 2007.
42. Khushboo Patel, Chaitali Patel, Syed S. Rizvi, and Khaled M. Elleithy, "An Approach to Reduce the
Energy Consumption in Wireless Sensor Networks through Active Nodes Optimization," 2007 Nefor
Engineering Education Confernce, April 20-21, 2007.
Honors
“Distinguished Professor of the Year”, University of Bridgeport, academic year 2006-2007.
Stephen Grodzinsky
Professor
Computer Engineering
Conference attendance in last five years:





Attendance at International Conference on Computer Ethics and Philosophical Inquiry
(CEPE), University of Twente, Netherlands, July 2005
Attendance at ISTAS, WPI, June 2004
Attendance at CEPE (Computer Ethics and Philosophical Enquiry), University of San
Diego, July 2007
Attendance at Gloria Rogers‟ ABET meeting in Louisville, KY, 2008
Attendance at CEPE, Ionian University, Greece, 2009
Navarun Gupta
Assistant Professor
Electrical Engineering
Journal Papers:
N. Gupta, B. D. Barkana, L.V. Hmurcik, “Two real-life fatal burn cases including smoke inhalation and
power line burns”, submitted to the Burns Journal, May 2009.
B. D. Barkana, N. Gupta, L.V. Hmurcik, “Electrothermal (aka contact) burns and the effects of current
density, application time, and skin resistance”, submitted to the Burns Journal, May 2009.
Conference Papers
M. Joshi, K. Kotakonda , N. Gupta and A. Barreto, “Improving Intelligibility of Teleconferences Using
Binaural Sounds”, REV 2009, June 22-25, 2009, Bridgeport, CT
B. Barkana, N. Gupta, L. Hmurcik, “Improving Tools and Techniques of Teaching Graduate Engineering
Courses Based on Students‟ Learning Styles and Multiple Intelligences”, ASEE 2009, June 14-17, 2009,
Austin, TX
Buket Barkana, Sarosh Patel, Navarun Gupta, and Lawrence V. Hmurcik, “USING REAL-LIFE CASES TO
TEACH STUDENTS ABOUT ELECTRIC BURNS, Part I Contact Burns”, ASEE NE Conference,
University of Bridgeport, April 3-4, 2009.
Sarosh Patel, Navarun Gupta, Buket Barkana, and Lawrence V. Hmurcik, “USING REAL-LIFE CASES TO
TEACH STUDENTS ABOUT ELECTRIC BURNS, Part II Secondary burns”, ASEE NE Conference,
University of Bridgeport, April 3-4, 2009.
Navarun Gupta, Buket Barkana, Lawrence V. Hmurcik, “Signal Processing in Astronomy: A Lab Based
Course for Engineering Majors”, poster, ASEE National Conference, Pittsburgh, PA, June 22-25, 2008.
Navarun Gupta, Buket Barkana, Lawrence V. Hmurcik, “Comparative Study of Binaural Sound Generation
Using Two HRTF Databases”, abstract accepted, ASEE National Conference, Austin, TX, June 14-17, 2009.
Buket Barkana, Navarun Gupta, Lawrence V. Hmurcik, “Improving Teaching Tools and Techniques of
Graduate Engineering Courses Based on Student‟s Learning Styles and Multiple Intelligences”, abstract
accepted, ASEE National Conference, Austin, TX, June 14-17, 2009.
Navarun Gupta, Buket Barkana, Larry Hmurcik, “Discussion on High Voltages and Their Successful
Introduction in to the Engineering Class Room Using Real Life Accident Cases”, ASEE Zone I conference,
West
Point,
NY,
March
2008.
Navarun Gupta, Larry Hmurcik, Vaibhav Bhatnagar, *Armando Barreto,“Real-Time Binaural Sound
Generation Using TI C6713 DSK Board”, Proceedings of 2007 New England ASEE Conference. April 2007
Navarun Gupta, Vaibhav Bhatnagar, Mark Mattie and Larry Hmurcik,“On the Use of a Real-Life Accident
Case to Effectively Teach the Subject of Electrical Safety in the Engineering Curriculum”, Proceedings of
2007 New England ASEE Conference. April 2007
Books
Online Engineering, Publisher: Springer, Book published May 2009
Editors: Saikat Ray, Navarun Gupta, Tarek Sobh
Contracts / Grants:
NSF Proposal: Nanotechnology Curriculum Integrating Undergraduate Education (Co-PI). Send April 29,
2009. Status: Pending
Partnerships for International Research and
Education (PIRE). Co-PI. Sent Feb, 2009. Status: Pending
Other Activities:













Co Chair or REV 2009 Conference. Hosted 105 participants from around the world at University of
Bridgeport. June 22-25, 2009
Co Chair of ASEE NE Regional Conference. Hosted about 400 participants at University of
Bridgeport. April 3-4, 2009
Chair of Dean‟s assistantship Committee.
Member of Biomedical Engineering Committee.
Developed newsletter for School of Engineering for year 2008.
Served on the search committee for hiring new faculty in Electrical and Computer Engineering (Fall
2008).
Served on the search committee for hiring new Lab Engineer (EE/ME).
Served on the search committee for hiring new faculty in Technology Management (Fall 2008).
Served on the Technology Management Ph.D. proposal committee (Fall 2008).
Representative from School of Engineering in Web Policy and Development Committee
Faculty advisor for India Club.
Judge in the International Festival, April 14, 2009.
Represented University of Bridgeport in PTLW (Project Lead The Way) in Stratford High School.
This program encourages high school students to take up Engineering as a career.
Lawrence V. Hmurcik
Professor
Department of Electrical Engineering
Conference Papers
1.
”Real –Time Binaural Sound Generation Using TIC6713 DSK Board”, Navarun Gupta, Larry Hmurcik,
Vaibhav Bhatnagar, Armando Barreto, American Society of Engineering Education New England Annual
Conference at the University of Rhode Island, 84 (April 21, 2007).
2.
”Aircraft Controller Design Using Quantitative Feedback Theory (QFT)”, Sarosh Patel and Lawrence
Hmurcik, American Society of Engineering Education New England Annual Conference at the University of
Rhode Island, 237A (April 21, 2007). Paper won best in session award.
3.
”On the use of a real-life accident case to effectively teach the subject of electrical safety in the engineering
curriculum”, Navarun Gupta, Vaibhav Bhatnagar, Mark Mattie, and Lawrence V.Hmurcik, American Society
of Engineering Education New England Annual Conference at the University of Rhode Island, 405 (April 21,
2007). Paper won best in session award.
4.
" A modern but simple approach to teaching friction", Lawrence Hmurcik, Sarosh Patel, and Manan Joshi,
American Society of Engineering Education New England Annual Conference at West Point, p 11, talk #
USMA-Z1-0125.
5.
"Improvements in Electrocardiography--smoothening and amplification", Manan Joshi, Sarosh Patel, and
Lawrence V. Hmurcik, American Society of Engineering Education New England Conference at West Point, p
11, talk # USMA-Z1-0076 (March 28,2008).
6.
"Discussion of High Voltages and their successful introduction in the engineering classroom using real-life
accident cases", Navarun Gupta, Buket Barkana, Sarosh Patel, Lawrence V. Hmurcik, American Society of
Engineering Education New England Conference at West Point, p 44, talk # USMA-Z1-0103 (March 29,
2008).
7.
"An Evaluation of the Indian International graduate students: expectations and experiences", Rajesh Bachu,
Deepak Deepawale, Buket Barkana, and Lawrence Hmurcik, American Society of Engineering Education
National Conference, Las Vegas (April 7, 2008).
8.
“Using real-life cases to teach students about electric burns: Part I secondary burns”, Buket Barkana, Sarosh
Patel, Navarun Gupta, Lawrence V. Hmurcik, American Society of Engineering Education Northeast Section
Conference, Bridgeport, CT (April 4, 2009).
9.
“Using real-life cases to teach students about electric burns: Part II contact burns”, Buket Barkana, Sarosh
Patel, Navarun Gupta, Lawrence V. Hmurcik, American Society of Engineering Education Northeast Section
Conference, Bridgeport, CT (April 4, 2009).
10. “Self-repairable MEMS Comb Accelerometer”, Xingguo Xiong, Linfeng Zhang, Lawrence V. Hmurcik,
Wenbin Zhang, American Society of Engineering Education Northeast Section Conference, Bridgeport, CT
(April 4, 2009).
11. “Using Wavelets in 1- Dimension for Smoothening EKG Waveforms”, Manan Joshi, Sarosh Patel, Lawrence
V. Hmurcik, American Society of Engineering Education Northeast Section Conference, Bridgeport, CT (April
4, 2009).
12. “EKG De-noising using 2-D Wavelet Techniques”, Manan Joshi, Sarosh Patel, Lawrence V. Hmurcik,
American Society of Engineering Education Northeast Section Conference, Bridgeport, CT (April 4, 2009).
13. “Teaching tools and techniques of graduate engineering courses based on student learning styles and multiple
intelligences”, Buket Barkana, Navarun Gupta, Lawrence V. Hmurcik, American Society of Engineering
Education National Conference, Austin, TX (June 17, 2009).
Consulting:
1.
On March 19, 2007, I did a site inspection in Kingston, PA, for Attorney Ciarimboli, 570-714-4878.The
inspection was videotaped by both Plaintiff (my client) and Defendant. My investigation showed a design flaw
in a Makita circular saw. The saw took too long to turn off, and hence it cut off my client‟s toe.
2.
On March 23, 2007, I did a site investigation in Bedford, NY for Attorney Green, 212 687 8181. A man was
found burned alive under a powerline on his estate. I put together a most probable scenario of what had
happened to cause the accident.
3.
On April 24, 2007, I advised Connecticut Analytical Corp. on the construction of an OLED sandwich to be
used in a portable photometer. OLED stands for organic LED.
4.
On April 26, 2007, I was asked to review the US patent “Residential Load Center with Arcing Fault
Protection”. The patent showed how a home computer can isolate an arc fault and shut down the guilty circuit
without effecting the other circuits in the hous.
5.
On May 21, 2007, I worked again on the forklift case. Investigation focused on the battery being over charged.
6.
On August 31, 2007, I worked on developing a patent for a portable device to monitor a person‟s vital signs
while they were working out at the gym. The patent was the brain child of a woman who works as a secretary
and who needed guidance in this arena.
7.
On August 31, 2007, I worked for Connecticut Analytical advising them on the development of a new type of
dish antenna: a 3 dimensional rather than 2 dimensional variety.
8.
On September 25, 2007, I advised a man struck by lightning as he passed a building. He claims that building
owner was liable because the building lacked lightning protection equipment. I found that under state law (CT)
this accident was considered an act of God. It was not something that one could sue for.
9.
On September 25, 2007, I advised attorney Attorney Solomon, of Ficke and Solomon, 622 Barlow Ave., Staten
Island, NY 10312. A resident of Brooklyn bought an electric space heater. He set it up upside down. It burned
the apartment building. It killed a young girl. I determined safety procedures that could have been used to
prevent this accident.
10. On October 8, 2007, I worked on a NASA grant for Connecticut Analytical Corp. Electro-propulsion rockets
are used for maneuvering the rocket and not for thrust. These can improve their ability to maneuver if one
introduces external magnets into the electric field.
11. On October 18, 2007, I worked in Henderson, Nevada for Cox Communications Inc., 702 433 9902. I talked to
their engineers about coding schemes for Fiber Optics data transmission, both past schemes and future
directions.
12. On October 22, 2007, I spoke with representatives of Atomic Energy Canada LTD. We discussed electric
machines used in the reprocessing of spent nuclear fuel.
13. On October 31, 2007, I had a second job in the Bedford Electrocution. Atty. Green and his assistants and
associates had tried to find the legal documents necessary to prosecute the power company NYSEG. They
could not. After one week of work, I found the documents pertinent to this case, and I was able to interpret
same.
14. On November 9, 2007, I worked for Mr. Joe Bango of Connecticut Analytical. He need me to get supporting
documentation for his patent: "Optical antivirus firewall for Internet, LAN, and WAN computer applications".
This invention removes viruses by converting computer code from electrical bits to optical images and
reconverting said images back to electrical bits. If a virus is attached to a legitimate code, it is unable to
convert to an optical image.
15. On December 2, 2007, I was contacted by Dr. Ojalvo of Technology Associates about a case in Naples, Florida
where a car caught fire. We determined that the most likely cause was lightning. Hence there was no defendant
to be sued in this case.
16. On March 17, 2008, I concluded my investigation for Attorney Matthew Kelly 212 349 5150. Based on my
report, the case settled in favor of Atty. Kelly's client, the widow of a man electrocuted when his boss had him
put up a sign near a 13,000 volt power line. The voltage was strong enough to cause current to jump from the
line to the lift bucket where the man was working. This procedure was in clear violation of New York City
statutes, which governed the accident location (Staten Island).
17. On April 7, 2008, I was contacted by publisher John Wiley and Sons, 201 748 7739 to review the book
Biomedical Instrumentation: Application and Design, by Dr. John Webster.
18. On May 1, 2008, I was contacted by Pitney-Bowes, Shelton, CT 203 337 3268 to implement an RFID control
antenna.
19. On May 6, 2008, I worked again on the case of the circular saw. I completed my investigation and found that
the incident saw was much improved in power efficiency over prior models. However, there were no extra
safeguards built in to regulate the extra power.
20. On May 16, 2008, a devout Muslim (Mr. Mohammed Uddin) consulted me. He experience painful shocks
when he bent down to pray on his prayer rug. I found that there was an accumulation of "dirt" and body oil on
this most sacred rug, especially in the area where his forehead touched the rug. This was conductive and set up
a path to ground. I recommended that he either get a new prayer rug or worship on a floor that was not
conductive (best case - put a clean non-prayer rug under the orginal rug).
21. On August 15, 2008, I worked for Attorney Tim Salmon 212 318 6167. His client is Dr. Gertrude Rothschild.
She has 2 patents for Blue LED's (# 4,904,618 and # 5,252,499). I was charged with working on several patent
infringement cases.
22. On August 25, 2008, I worked for Dr. Ojalvo of Technology Associates for a case out of Naples Florida. An
electrician was 15 feet above a warehouse floor on a makeshift platform. He received a shock and fell to his
death. I determined that the shock was small and could only have produced minor injury. If he had been on a
safety ladder or scaffolding, then he would not have fallen. He would NOT have died. His injuries would be
trivial. The company was sued for un-safe practices.
23. On September 9, 2008, I worked Attorney Mitchell Studley, 718 658 3000. A woman was burned in an Astoria
Health Spa when she received electric shocks to various parts of her body to stimulate muscle massage. My
investigation determined that the Spa re-used the pads applied to her skin. This made them less sticky. The
contacts partially peeled off. This forced the electricity to travel through a smaller contact area, and this caused
3rd degree burns.
24. On October 27, 2008, I did an investigation on rocks and dust brought back from the moon. Under a NASA
grant, Connecticut Analytical is investigating the photoionization of Lunar Regolith. They asked for my
services to critique their experimental setup and to analyze their data.
25. On January 2, 2009, I did a job for Tech Associates. A garage door for a factory in Hartford, CT was being
raised. When it came to the top it kept trying to go higher. The door was NOT a modern door with sensors.
Hence the motor continued to drive the door up, even after it reached its maximum height. This caused a cable
to brake and a workman to be injured. We found this was caused by improper maintenance and upgrading of
the company hired to fix and monitor the door.
26. On January 23, 2009, I did a job for Tech Associates. They were investigating a man who claimed to be struck
by lightning while on a construction job in Hawaii. We found that the worker‟s injuries were extremely mild;
they could be explained by another un-related accident.
27. On February 16, 2009, I did a job for Bridgeport Hospital in Bridgeport, CT. A patient was anesthesized and
unconscious. He was to undergo surgery. He was producing a faint electric noise that interfered with the
electrical signals being produced by the machines that monitored his physical activity. A simple, immediate
cure for this problem was effected by having the patient‟s had taped to the metal post of the “bed” he was on.
This grounded all electric signals produced within his body. More complex and long term solutions were also
proposed.
28. On March 6, 2009, I was contacted to investigate an accident at the Mount Sinai Hospital in New York. A
patient had a bronchoscope inserted into their lungs via their mouth. The bronchoscope exploded while inside
the patient. Reasons for the accident were machine defects as well as the technician‟s lack of training.
29. On April 3, 2009 I did a workshop for high school and college teachers along with Dr. Buket Barkana. My role
was to discuss electric safety in the home. This workshop was part of the ASEE (American Society of
Engineering Education) Northeast conference.
30. Beginning on May 11, 2009 and continuing to the present. I have been a consultant for a new book to be
published on Digital Signal Processing or DSP. The authors are Vekatasubramanian Krishanmoorthy and Uma
Viswanathan. Publication is expected in 2010/2011.
31. On May 21, 2009, I was questioned by Attorney Mark Dumas, Crumbie Law Group LLC, 280 Trumbull Street,
21st floor, Hartford, CT 06103, 860 725 0025. He has a case involving a person accused of tapping in to the
power company‟s electric line for free electricity.
Junling (Joyce) Hu
Assistant Professor
Mechanical Engineering
JOURNAL PUBLICATIONS
1. H. Guo, J. Hu and H. L. Tsai, “Formation of weld crater in GMAW of aluminum alloys”,
International Journal of Heat and Mass Transfer, under revision.
2. G. Xu, J. Hu and H. L. Tsai, “Modeling and Verification of 3D Plasma Arc in Gas Tungsten
Arc Welding”, ASME Journal of Heat Transfer, under revision.
3. G. Xu, J. Hu and H. L. Tsai, “Modeling of Arc Plasma and Metal Transfer in 3D Gas Metal
Arc Welding”, International Journal of Heat and Mass Transfer, 52 (2009) 1709-1724..
4. G. Xu, J. Hu and H. L. Tsai, “Three-Dimensional Modeling of the Plasma Arc in Arc
Welding”, Journal of Applied Physics, 104, 103301 (2008).
5. J. Hu and H. L. Tsai, “Modeling of Transport Phenomena in 3D GMAW of Thick Metal
with V-Groove”, Journal of Physics D: Applied Physics, 41 (2008) 065202 (10pp).
6. J. Hu, H. Guo and H. L. Tsai, “Weld Pool Dynamics and the Formation of Ripples in 3D
Gas Metal Arc Welding”, International Journal of Heat and Mass Transfer 51 (2008), 25372552.
7. J. Hu and H. L. Tsai, “Metal Transfer and Arc Plasma in Gas Metal Arc Welding”, ASME
Journal of Heat Transfer, 129 (2007) 1025-1035.
CONFERENCE PUBLICATIONS
1. Z.H. Rao, J. Hu, S.M. Liao and H. L. Tsai, “Study the shielding gas effect on the metal
transfer and weld pool dynamics in GMAW”, 2009 ASME Summer Heat Transfer
Conference, San Francisco, California, July 19-23, 2009.
2. Z.H. Rao, J. Hu, S.M. Liao and H. L. Tsai, “Study the shielding gas effects on transport
phenomena in GMAW arc”, 20th International Symposium on Transport Phenomena
(ISTP20), Victoria, British Columbia, Canada, July 7-10, 2009.
3. L. Zhang, X. Xiong and J. Hu, “Integrating Alternative Energy Technology into Engineering
Education”, 2009 ASEE Annual Conference & Exposition, Austin, TX, June 14-17, 2009.
(submitted)
4. X. Xiong, L. Zhang and J. Hu, “Introducing the Small World – Developing
MEMS/Nanotechnology Curriculum”, 2009 ASEE Annual Conference & Exposition, Austin,
TX, June 14-17, 2009. (submitted)
5. K. Ren, J. Hu, X. Xiong, L. Zhang and J. Wei, “Validation of Turbulence Models in STARCCM+ by N.A.C.A. 23012 Airfoil Characteristics”, 2009 ASEE Northeast Section
Conference, University of Bridgeport, April 3-4, 2009.
6. K. Karuppannan, X. Xiong, L. Zhang, and J. Hu “Fault Simulation of Surfacemicromachined MEMS Accelerometer”, 2009 ASEE Northeast Section Conference,
University of Bridgeport, April 3-4, 2009.
7. L. Zhang, X. Xiong and J. Hu, “Developing a New Graduate Program in Sustainable Energy
Engineering”, 2009 ASEE Northeast Section Conference, University of Bridgeport, April 34, 2009.
8. Z.H. Rao, J. Hu, S.M. Liao and H. L. Tsai, “Determination of Equilibrium Wire Feed Speeds
for a Stable GMAW Process”, ASME-IMECE, Boston, MA, October 31-November 6, 2008.
9. G. Xu, J. Hu and H. L. Tsai, “Modeling of Arc Plasma and Metal Transfer in 3D Gas Metal
Arc Welding”, 19th International Symposium on Transport Phenomena (ISTP19), Reykjavik,
Iceland, August 17-21, 2008.
10. J. Hu, L. Zhang and X. Xiong, “Teaching Computational Fluid Dynamics (CFD) to Design
Engineers”, 2008 ASEE Annual Conference & Exposition, Pittsburgh, PA, June 22-25, 2008.
11. W. Luo, F. Chen, and J. Hu, "Improvement of Low Strain Pile Integrity Test", 2008 New
England ASEE Conference, West Point, NY, March 2008.
12. J. Hu and H. L. Tsai, “Modeling Three-Dimensional Gas Metal Arc Welding with Groove”,
ASME-IMECE, Seattle, Washington, 2007.
13. J. Hu, H. Guo and H. L. Tsai, “Weld Pool Dynamics and the Formation of Ripples in 3D
Gas Metal Arc Welding”, ASME-IMECE, Seattle, Washington, 2007.
14. J. Hu, “Simulation of Turbulent Separated Flow Using Star-ccm+”, STAR America’s
Conference, Detroit, Michigan, 2007.
POSTER PRESENTATIONS

F. Song and J. Hu and T. Ting, “Particle Contamination in a Ventilated Room”, 2009 ASEE
Northeast Section Conference, University of Bridgeport, April 3-4, 2009.

V. Joshi and J. Hu, “Surge Protection Through Restrictor Plate”, 2009 ASEE Northeast
Section Conference, University of Bridgeport, April 3-4, 2009.

K. Ren, W. Luo, J. Hu and L. Zhang, “Gas Sensor with Novel Magnetic Microvalve”, 2009
ASEE Northeast Section Conference, University of Bridgeport, April 3-4, 2009.

W. Luo, J. Hu, and J. Wei, “CFD Simulation and Validation of Airfoil Characteristics”,
2008 CT Space Grant College Consortium Award Reception, Hartford, CT, May 2008.

P. Rajamanickam, J. Hu, and T. Ting, "Car Radiator Inlet Design Using CFD", 2008 New
England ASEE Conference, West Point, NY, March 2008.

A. Aphale, G. Patel, J. Hu, “Turbulent Flow in an Asymmetric diffuser", 2008 New England
ASEE Conference, West Point, NY, March 2008.

G. Patel, A. Aphale, and J. Hu, A Study of Thermal Spreading Resistance", 2008 New
England ASEE Conference, West Point, NY, March 2008.

K.R. Singh (Dangol) and J. Hu, “System Level Thermal Analysis of an Electronic System
under Different Conditions”, 2007 New England ASEE, Kingston, RI, April 2007.

K.R. Singh (Dangol) and J. Hu, “Design of Roshi Khola Micro Hydropower Plant”, 2007
New England ASEE Conference, Kingston, RI, April 2007.
GRANTS
1. J. Hu and H.L. Tsai, “Modeling Transport Phenomena and Shielding Gas Effects in Gas
Metal Arc Welding”, University of Bridgeport Seed Grant, Office of Sponsored Research at
UB, $7,000, 2009, funded..
2. J. Hu, “CFD Validation and Simulation of Airfoil Characteristics”, CT Space Grant College
Consortium, $6000 and $12,000 in UB Matching Funds, 2007, funded.
WORKSHOPS & TRAININGS
Integration of Simulation Technology into the Engineering Curriculum (ISTEC) 2008 workshop,
Cornell University, Ithaca, NY 2008
STAR-CCM+ (CD-adapco) seminar on Accurately Predicting Complex Cooling Flows and
hands on workshop, Plantsville, CT 2008
Building a Connecticut College and University STEM Network: Keeping Students Engaged in
STEM by Project Kaleidoscope and Connecticut Conference of Independent Colleges, St. Joseph
College, CT, 2008
Enhancing Teaching through Proper Techniques, United States Military Academy, NY, 2008
Symposium for Aerospace Laser Applications 2008, Hartford, CT, 2008
Carbon in the 21st Century Conference, University of Connecticut, CT, 2007
Laser Applications in Manufacturing Processes Seminar, University of Hartford, CT, 2006
STAR-CCM+ (CD-adapco) new user training, Detroit, MI, 2006
COMSOL Multiphysics Workshop, Hartford, CT, 2006
Flowtherm web Demos and web seminars, 2005 – present
NSF Regional Grants Conference, College Park, Maryland, 2006
DoD SBIR Proposal Workshop, New Britain CT, 2006
TRUST WISE Program, University of California – Berkely, CT, 2006
Laser Hole Drilling Workshop, Hartford, CT, 2005
PROFESSIONAL AFFILIATION
American Society of Mechanical Engineers (ASME) (2001 – present)
Member of K-15 Committee on Transport Phenomena in Manufacturing and Materials
Processing in Heat Transfer Division (HTD)
American Society for Engineering Education (ASEE) (2007 – present)
Society of Women Engineering (SWE) (2008 – present)
PROFESSIONAL SERVICE
REVIEWER and PANELIST of PROPOSALS
National Science Foundation
CT Space Grant
REVIEWER of JOURNALS
ASME Journal of Heat Transfer
Journal of Physics D: Applied Physics
Journal of Micromechanics and Microengineering
Metallurgical and Materials Transactions B
Numerical Heat Transfer
Journal of Enhanced Heat Transfer
AIAA Journal
IEEE Transactions on Automation Science and Engineering
Optics & Laser Technology
Applied Physics B: Lasers and Optics
International Journal of Abrasive Technology
ASME Journal of Manufacturing Science and Engineering
REVIEWER of CONFERENCES
ASME Summer Heat Transfer Conference
ASME- International Mechanical Engineering Congress (IMECE)
International Conference on Industrial Electronics, Technology & Automation (IETA)
European Control Conference
CONFERENCE ORGANIZER
Session Chair, ASEE St. Lawrence Section papers, 2009 ASEE Northeast Section Conference,
University of Bridgeport, April 3-4, 2009.
Session Chair, “Laser Applications in Manufacturing and Materials Processing”, ASME 2008 International
Mechanical Engineering Congress (IMECE), Boston, MA, October 31 - November 6, 2008.
Session Chair, “Laser Applications in Manufacturing and Materials Processing”, ASME 2008 International
Mechanical Engineering Congress (IMECE), Boston, MA, October 31 - November 6, 2008.
Topic/Symposium and Session Co-Chair, “Laser Applications in Manufacturing and Materials Processing”,
ASME 2007 International Mechanical Engineering Congress (IMECE), Seattle, WA, November
10-16, 2007.
Technical Committee, International Conference on Industrial Electronics, Technology &
Automation (IETA), Bridgeport, CT, December 3-12, 2007.
Technical Committee, International Conference on Industrial Electronics, Technology &
Automation (IETA), Bridgeport, CT, December 4-14, 2006.
Technical Committee, International Conference on Industrial Electronics, Technology &
Automation (IETA), Bridgeport, CT, December 10-20, 2005.
OTHER PROFESSIONAL SERVICES
Campus Director of Connecticut Space Grant College Consortium (University of Bridgeport), 2007 –
present.
Judge for the Student Poster Competition at 2008 ASEE New England Section Conference.
Judge for the Bridgeport Public School Science Fair, 2008
Judge for the Student Poster Competition at 2007 ASEE New England Section Conference.
Judge for the Olin-Yale-Bayer-NHPS Citywide Science Fair, 2006, 2007.
Webmaster of American Society of Mechanical Engineers (ASME) K-15 Committee
UNIVERSITY SERVICE
ME School Library Representative (08/2005 – present)
University Faculty Senate Representative (09/2006 – present)
University Faculty Council Representative (09/2006 – present)
ME/TCMG Faculty Search Committee (2006)
ME Faculty Search Committee (2007, 2008)
Appeals Committee for Undergraduate Academic Separation (2007)
Biomedical Program Committee of School of Engineering (2007 – 2008)
Academic Concerns Committee of the Faculty Council (10/2007 – present)
School of Engineering Merit Pay Committee (2008)
Technology Management Ph.D Committee (2008)
Dean‟s Assistant Awards Committee
Sustainable Energy Engineering Committee of School of Engineering (2009 – present)
Elif Kongar
Assistant Professor
Technology Management
Journal Publications
1. Rosentrater, K. and E. Kongar, Greening the Curriculum: Augmenting Engineering and Technology
Courses with Sustainability Topics, Journal of Engineering and Applied Sciences (accepted to be
published), 2009(Special Issue).
2. Rosentrater, K. and E. Kongar, Modeling the Effects of Pelleting on the Logistics of Distillers Grains
Shipping, BioResource Technology, 2009, (accepted).
3. Kongar, E. and S.M. Gupta, A Multiple Objective Tabu Search Approach for End-of-Life Product
Disassembly, International Journal of Advanced Operations Management (IJAOM), 2009, 1(4): p. 504 531.
4. Kongar, E. and S.M. Gupta, Solving the Disassembly-to-Order Problem Using Linear Physical
Programming, International Journal of Mathematics in Operational Research (IJMOR), 2009, 1(4).
5. Kongar, E., P. Kontogiorgis, R. N., and T. Sobh, Women in Science, Engineering and Technology:
Changing Roles and Perception within the Technical Services Industries, Journal of Engineering and
Applied Sciences [Medwell], 2009, 4(1): p. 46-50.
6. Kongar, E. and T. Sobh, A Method for Evaluating the Performance of Engineering Schools, International
Journal of Engineering Education (IJEE), 2009 (to be submitted).
7. Kongar, E. and T. Sobh, A Two-Step Data Envelopment Analysis Approach for Efficient Engineering
Enrollment Management, International Journal of Engineering Education (IJEE), 2009, 25(2): p. 391402.
8. Efendigil, T., S. Onut, and E. Kongar, A Holistic Approach for Selecting a Third-party Reverse Logistics
Provider in the Presence of Vagueness, Computers & Industrial Engineering, 2008, 54(2): p. 269-287.
9. Kongar, E., E. Abu Zaghleh, and T. Sobh, Online Customization and Enrollment Application Network
(OCEAN), International Journal of Emerging Technologies in Learning, 2007, 2(3).
Book Chapters
1. Kongar, E. and S.M. Gupta, The Promise of the Real-Time Supply Chain, in The Handbook of
Technology Management, 2009, H. Bidgoli, Editor, 2009, John Wiley & Sons, Inc.: Hoboken, NJ.
2. Kongar, E. and S.M. Gupta, A Data Envelopment Analysis Approach for Household Appliances and
Automobile Recycling, in Web-Based Green Products Life Cycle Management Systems: Reverse Supply
Chain Utilization, P.H.-F. Wang, Editor, 2008, Premier Reference Source. p. 367-378.
3. Kongar, E. and S.M. Gupta, End-of-Life Processing via Data Envelopment Analysis, in Research
Methodology on Data Envelopment Analysis (DEA), J.K. Mantri, Editor, 2008, Universal Publishers:
Boca Raton, Florida. p. 197-215.
Conference Papers
1. Kongar, E., P. Kontogiorgis, N.L. Russo, and T. Sobh. Increasing the Participation of Women in the
Engineering and Technical Services Industries, ASEE Zone 1 Conference. 2008. West Point, NY.
2. Kongar, E. and D. Mueller. A Comparative Study on Production and End-of-Life Cycles of
Anthropogenic Iron Cycles, 5th International Logistics and Supply Chain Congress 2007, November 8-9,
2007. Istanbul, Turkey.
3. Kongar, E. and K. Rosentrater. Modeling the Effects of Value-Added Processing and Logistics Using
Arena, Northeast Decision Sciences Institute (NEDSI). 2008. Brooklyn, NY.
4. Kongar, E. and K. Rosentrater. A Multiple Criteria Decision Making Model For Renewable Energy
Technology Selection, Northeast Decision Sciences Institute (NEDSI). 2009. Mohegan Sun, Uncasville,
CT.
5. Kongar, E. and T. Sobh. Evaluating the Efficiency of Candidates for Graduate Study via Data
Envelopment Analysis, 2007 ASEE Annual Conference & Exposition, June 24-27, Honolulu, Hawaii,
2007.
6. Kongar, E., Sobh, T., “Prioritizing Goals Of U.S. Universities To Ensure Sustainability”, ASEE 116th
Annual Conference & Exposition, June 14 - 17, 2009, Austin Convention Center, Austin, TX.
7. Johar, B. O., Gupta, S. M. and Kongar, E., “Inventory Control Policies of Recoverable EOL Products on
a Disassembly Line”, Proceedings of the 5th International Logistics and Supply Chain Congress,
Istanbul, Turkey, pp. 584-587, November 8-9, 2007.
8. Kongar, E., Sobh, T., “A Preemptive Goal Programming Model for the Sustainability of Growth in
Engineering Colleges”, Proceedings of the ASEE Zone 1 Conference, March 26-27, West Point, NY,
2008.
9. Kongar, E., Sobh, T., „Are We Accepting the Right Students to Graduate Engineering Programs:
Measuring The Success Of Accepted Students Via Data Envelopment Analysis”, ASEE Conference,
Pittsburgh PA, June 2008.
10. Kongar, E., Rosentrater, K., “Not Just Informative, But Necessary: Infusing Green and Sustainable
Topics Into Engineering and Technology Curricula”, ASEE Conference, Pittsburgh PA, June 2008.
11. Rosentrater, K. and E. Kongar. Not Just Informative, But Necessary: Infusing Green and Sustainable
Topics Into Engineering and Technology Curricula, ASEE Annual Conference & Exposition. 2008.
Pittsburgh, PA.
12. Rosentrater, K. and E. Kongar. Biofuel Coproducts: Modeling the Effects of Value-Added Processing
and Logistics, 5th International Logistics and Supply Chain Congress. 2007. Istanbul, Turkey.
13. Sobh, T., Kongar, E., , “Online Customization and Enrollment Application Network (OCEAN) to
Reduce the Problems in Student Advising Process”, International Conference on Interactive Computer
aided Blended Learning, 7 - 9 May 2007 in Florianopolis, Brazil.
Academic Activities

Keynote Speaker, IEEE Spring Colloquium, April 18, Bridgeport, CT, 2009.

Program Committee (IPC), IASTED International Conference on Robotics and Applications, November
4-6, Cambridge, MA, USA, 2009.

Program Committee, Int. Logistics & Supply Chain Congress, Nov. 5-6, Istanbul, Turkey, 2009.

Technical Committee, 2009 NE ASEE Conference, Engineering in the New Global Economy,
Bridgeport, CT, April 3-4, 2009.

Session Chair, Session 3560, 2009 ASEE Annual Conference, Austin, TX, USA, June 14 - 17, 2009.

Session Chair, ASEE NE Conference, Ind., Aut. & Mfg. Eng. / Robotics Session, April 3-4, 2009.

Session Chair, NEDSI Conference, Brooklyn, NY, March 28-29, 2008.

Session Chair, Engineering Education Session, New England American Society for Engineering
Education Conference, Making a Case for Engineering, April 20-21, Providence, RI, 2007.

Judge, Bridgeport Public Schools, 2009 Science Expo, February 11, Bridgeport, CT, 2009.

Reviewer, Service Management: Operations, Strategy, Information Technology, 6e by
Fitzsimmons/Fitzsimmons (invited by Editorial Coordinator | McGraw-Hill Publishing), January 2009.

Reviewer, ASEE 116th Annual Conference & Exposition, June 14 - 17, 2009, Austin Convention Center,
Austin, TX.

Member, LODER Third Logistics Contest Jury, Since 2007, Istanbul, TURKEY.
Grant Applications

NSF Graduate Teaching Fellows in K-12 Education (GK-12) Program Solicitation NSF 09-549,
SuSTEMability: Inspiring Connecticut's Next Generation of Scientists and Engineers Through STEM
Partnerships (app. $3 M), Elif Kongar (PI), Jani Pallis (Co-PI), Kathleen Engelmann (Co-PI), and
Natalia Romalis (Co-PI). Pending.

UB SOE, Seed Money Grant, Establishing an Environmental Sustainability Program at the University of
Bridgeport, $7,000. Elif Kongar (PI). Accepted.

(FIPSE)--Special Focus Competition: European Union-United States Atlantis Program), Sponsor:
Department of Education (Fund for the Improvement of Postsecondary Education Title: Transatlantic
Degree Consortium Project, Total Amount: 180,000, Elif Kongar (Coordinator).
Jeongkyu Lee
Assistant Professor – Computer Science and Engineering
Journal papers
1. Sae Hwang, JungHwan Oh, Jeongkyu Lee, W. Tavanapong, Piet C. de Groen, and Johnny Wong.
Informative Frame Classification for Endoscopy Video. Journal of Medical Image Analysis, Vol 112, pp. 110-127, 2007.
2. JungHwan Oh, Xiaohui Yuan, Jeongkyu Lee, and Shou Jiang Tang. Efficient Techniques to
Summarize and Analyze Wireless Capsule Endoscopy Videos, Submitted to the Journal of Medical
Image Analysis.
3. M. Emre Celebi, Hassan A. Kingravi, Jeongkyu Lee, and Y. Alp Aslandogan. Practical Issues in the
Implementation of Nonlinear Vector Filters. Submitted to IEEE Transactions on Systems, Man and
Cybernetics, Part C.
Conference papers
1. Jeongkyu Lee, and Jalpa Bani. Adapting Anti-Plagiarism Tool into Coursework in Computer
Science and Engineering Program. Proc. of the 2009 National ASEE conference, Austin, TX,
[Accepted].
2. Jeongkyu Lee. Remodeling Database Courses for Students of a new Ph.D. Program in Computer
Science and Engineering. Proceeding of 2009 New England American Society for Engineering
Education Conference, Bridgeport, CT, April 2009.
3. Yingju Chen, Wisam Yasen, Jeongkyu Lee, Dongha Lee, and Yongho Kim. Developing assessment
system for wireless capsule endoscopy video based on event detection. Proc. of SPIE Medical
Imaging. Feb. 7 - 12, 2009. Orlando, FL. (Accepted for oral presentation)
4. Dongwon Lee, Hung-Sik Kim, Eun Kyung Kim, Su Yan, Johnny Chen, and Jeongkyu Lee. LeeDeo:
Web-Crawled Academic Video Search Engine, Workshop on Data Semantics for Multimedia
Systems and Applications in conjunction with ISM2008, Dec. 15-17, 2008. Berkeley, CA.
5. Hungsik Kim, Jeongkyu Lee, Haibin Liu, and Dongwon Lee, Video Linkage: Group Based Copied
Video Detection, Proceeding of International Conference on Image and Video Retrieval (CIVR
2008), July 7-9, Niagara Falls, Canada, 2008.
6. Padmini K. Ramalingam, Munther Abualkibash, Rajendara Tadvi, and Jeongkyu Lee. Ontology
Creation for Wireless Capsule Endoscopy. Proceeding of 2008 New England American Society for
Engineering Education Conference, West Point, NY, March 28-29, 2008.
7. Jeongkyu Lee. STRG-QL: Spatio-Temporal Region Graph Query Language for Video Databases.
Proc. of SPIE IS&T Electronic Imaging. SPIE Vol. 6820, pp. 68200P1-12, Jan. 27 - 31, 2008. San
Jose, CA. (Accepted for oral presentation)
8. Jeongkyu Lee, Munther H. Abualkibash, and Padmini K. Ramalingam. Ontology-based Shot
Indexing for Video Surveillance System. Proc. of CISSE 2007, Dec. 3 - 12, 2007. . (Accepted)
9. Subodh K. Shah, JeongKyu Lee, and M. Emre Celebi. Classification of Bleeding Images in Wireless
Capsule Endoscopy using HSI Color Domain and Region Segmentation. Proceeding of 2007 New
England American Society for Engineering Education Conference, Kingston, RI, April 2007.
10. Hung-sik Kim, Jau-Wen Chang, Haibin Liu, Jeongkyu Lee, and Dongwon Lee. A Novel Image
Matching Method using Biological Gene Sequence Alignment. Submitted to IEEE ICIP 2009.
Book Chapter
1. Jeongkyu Lee, Subodh Shah, and Pragya Rajauria. Video Ontology, Encyclopedia of Multimedia
Technology and Networking 2nd Edition edited by Dr. Margherita Pagani. Idea Group Inc. and IRM
Press, 2007.
Funded, Current and Pending Contracts
1. 2009 – 2011: Real-time Multimedia GI endoscopy reporting system, Recovery Act Limited
Competition: NIH Challenge Grants in Health and Science Research (RC1), $987.749.00 (PI:
Jeongkyu Lee, Pending)
2. 2009 – 2012: III: Small: Collaborative Research: Building Large-Scale Educational Video
Digital Libraries by Crawling the Web, National Science Foundation, $168,516 (PI: Jeongkyu
Lee, Pending)
3. 2009 – 2011: III: Small: Collaborative Research: Smart Browsing System for Wireless Capsule
Endoscopy, $149,610 (PI: Jeongkyu Lee, Pending)
4. 2009: JusTDo: Developing Automatic Judging System for Taekwondo Poomsae Videos, Seed
money grant at University of Bridgeport, $10,000 (PI: Dr. Jeongkyu Lee, Granted)
5. 2008: Hybrid Projectile Design, U.S. Army Armament, Research Development & Engineering
Center (ARDEC), $57,688 (Co-PI: Dr. Jeongkyu Lee, Completed)
6. 2008 – 2009: A Proposal for the Developing Smart View Module in Wireless Capsule
Endoscopy Videos, IntorMedic Co., Ltd., $65,000 (PI: Dr. Jeongkyu Lee, Completed).
Other activities
Patent

Jeongkyu Lee, Youngho Kim, Youngdae Seo, Dongha Lee, Method and System for Processing
Visual Images of Digestive System, US Patent Application No 12/334,423, December 2008 (filed).
Professional Activities
Chair of

3rd International Workshop on Multimedia Data Mining and Management (MDMM‟09) in
conjunction with DEXA, Sep. 2009, Linz, Austria..

2nd International Workshop on Multimedia Data Mining and Management (MDMM‟08) in
conjunction with DEXA, Sep. 2008, Turin, Italy.

1st International Workshop on Multimedia Data Mining and Management (MDMM‟07) in
conjunction with DEXA, Sep. 2007, Regensburg, Germany.
Program Committee of

ACM International Conference on Signal Processing and Multimedia Applications (SIGMAP 2009),
July 2009.

IEEE International Workshop on Data Semantics for Multimedia Systems and Applications
(DSMSA2008), December 2008.


IEEE International Conference on Semantic Computing, Santa Clara, CA, August 2008.


International Joint Conference on E-Business and Telecommunications (ICETE 2008), July 2008.

ACM International Conference on Signal Processing and Multimedia Applications (SIGMAP 2007),
July 2007.

IEEE International Symposium on Multimedia (ISM 2006), Dec. 2006 (Session chair of Special
Track on Doctoral Dissertation in Multimedia)

ACM Symposium on Applied Computing (SAC 2007), March 2007.
ACM International Conference on Signal Processing and Multimedia Applications (SIGMAP 2008),
July 2008.
International Joint Conferences on Computer, Information, and System Sciences, and Engineering
(CISSE 2007), December 2007.
Other Professional Services

Faculty Research Council representing School of Engineering at University of Bridgeport, 2008 –
Present.

Committee member of Academic Concern Committee in Faculty Council at University of Bridgeport,
2008 – Present.

Chair of Faculty Search Committee at Department of Computer Science and Engineering, University
of Bridgeport, 2008 – Present.

Committee member of Faculty Search at Department of Computer Science and Engineering,
University of Bridgeport, 2008 – Present.

Chair of Academic Standards Committee at School of Engineering, University of Bridgeport, 2008 –
Present.

Committee member of Ph.D. program in Technical Management, University of Bridgeport, 2008 –
Present.

Official judge of the Bridgeport Science Expo, 2007 - 2009.
Neal Lewis
Associate Professor
Technology Management
Journal Papers
Eschenbach, Ted; Lewis, Neal; and Hartman, Joseph. “Waiting Cost Models for Real
Options.” The Engineering Economist, Vol. 54, No. 1, March 2009, pp. 1-21.
Lewis, Neal; Eschenbach, Ted; and Hartman, Joseph. “Can We Capture the Value of
Option Volatility?” The Engineering Economist, Vol. 53, No. 3, September 2008, pp. 230258. Winner of the Eugene Grant Award for 2008, best paper published in The Engineering
Economist.
Spurlock, David G.; Cox, Leroy R.; Lewis, Neal A.; and Lueck, Gail A. “A Content
Analysis of Data Collection and Analysis Techniques as Reported in the Engineering
Management Literature,” Engineering Management Journal, Vol. 20, No. 2, June 2008, pp.
46-55.
Eschenbach, Ted; Lewis, Neal; Henrie, Morgan; Baker, Elisha IV; Hartman, Joseph. "Real Options
and Real Engineering Projects." Engineering Management Journal, Vol. 19, No. 4, December
2007, pp. 11-19.
Conference Papers
Lewis, Neal; Eschenbach, Ted; and Hartman, Joseph. “Real Options and the Use of Discrete and
Continuous Interest Rates,” 2009 National Conference, American Society for Engineering
Education, Austin, TX, June 2009 (paper approved).
Eschenbach, Ted; Lewis, Neal; and Hartman, Joseph. “The Cost to Keep a Real Deferral Option
Open,” 2009 Industrial Engineering Research Conference, Miami, FL, BC, May 2009 (presentation
only; presented by Ted Eschenbach).
Lewis, Neal; Eschenbach, Ted, and Hartman, Joseph. “Where Real Options Might Really Work,”
2009 Zone 1 Conference, American Society for Engineering Education, Bridgeport, CT, April
2009.
Lewis, Neal. “Internships as a Two-way Business Deal: An Industrial Perspective,” American
Society for Engineering Management, West Point, NY, November 2008 (presentation only).
Lewis, Neal; Eschenbach, Ted, and Hartman, Joseph. “Integrating Real Options with Decision
Trees & Simulation: Uncertainty in the Graduate Engineering Economy Course,” American Society
for Engineering Management, West Point, NY, November 2008.
Lewis, Neal; and Eschenbach, Ted. “Real Options in Engineering Economy Education,” 2008
National Conference, American Society for Engineering Education, Pittsburgh, PA, June 2008.
Lewis, Neal; Eschenbach, Ted, and Hartman, Joseph. “Waiting Costs for Real Engineering Projects
Evaluated with Real Options,” 2008 Industrial Engineering Research Conference, Vancouver, BC,
May 2008.
Lewis, Neal. “The Engineer as a Professor: Bringing Experience to the Engineering Classroom,” 2008 Zone
1 Conference, American Society for Engineering Education, West Point, NY, March 2008.
Lewis, Neal. “Use of Industrial „War Stories‟ in the Technical Management Classroom.” 2007
National Conference, American Society for Engineering Management (presentation only).
Lewis, Neal; Eschenbach, Ted; and Hartman, Joseph. "Sensitivity Analysis of a Real Options
Problem." 2007 Industrial Engineering Research Conference, Institute of Industrial Engineers.
Book Chapters
Peterson, William; Lewis, Neal; and Eschenbach, Ted. “Aunt Allee‟s Jams and Jellies,” case study to be
published in Cases in Engineering Economy, 2nd edition by William Peterson and Ted Eschenbach, Oxford
University Press.
Neal Lewis was a listed contributor in Engineering Economic Analysis, 10th edition, by Donald G. Newnan,
Jerome P. Lavelle, and Ted G. Eschenbach, published by Oxford University Press, 2009.
A Sample of Funded, Current and Pending Contracts
Neal Lewis, Seed Grant, “Modeling Manufacturing Performance for Production Efficiency Improvement”
funded to start Fall 2009. $6,860.
Other Notable Faculty/Student Activities
Neal Lewis, along with co-authors Ted Eschenbach and Joseph Hartman, received the Eugene L. Grant
Award in June 2009, presented at the annual meeting of the Engineering Economy Division of the American
Society for Engineering Education for the best paper published in The Engineering Economist. The winning
paper was “Can We Capture the Value of Option Volatility?” The award includes a $1000 gift (shared
among the authors).
Lewis, Neal. “Real Options Analysis.” Presentation to the University of Bridgeport, School of Engineering Colloquium, October 4, 2007.
Faculty Activities
Academic Activities










Member, American Society for Engineering Education, 2007-2009. Officer, Engineering
Management Division, 2008-2009.
Member, American Society for Engineering Management, 2007-2009.
Member, International Society for Pharmaceutical Engineering, 1995-2009.
Member, Portland International Conference for the Management of Engineering and Technology,
2007-2009.
Session Chair, ASEE Zone 1 Conference, Bridgeport, CT, April 2009.
Session Chair, ASEE Zone 1 Conference, West Point, NY, March 2008.
Reviewer, The Engineering Economist, 2008-2009.
Reviewer, Technology Management Handbook, to be published by Wiley.
Reviewer, Journal of Pharmaceutical Innovation, 2008.
Reviewer, Scientific Journals International, 2008.
Campus Activities
Chair, School of Engineering Curriculum Committee, 2008-2009.
UB Graduate Council, SOE representative, 2008-2009.
SOE Building Expansion Committee, 2008-2009.
SOE Merit Committee, 2008.
Biomedical Engineering program proposal committee, 2007-2008
PhD in Technology Management program proposal committee, 2007-2009.
Faculty search committees
Created 3 new courses: Foundations of Manufacturing Management (TCMG/MEEG 530), Engineering
Economics and Management (TCMG 546), and Introduction to Graduate Studies (TCMG 499). First
coordinator of the new course Contemporary Issues in Communications and Quantitative Methods
(TCMG 495).
Zheng (Jeremy) Li
Associate Professor
Mechanical Engineering
Conference Papers:
1. Zheng (Jeremy) Li, 2010, “Design and Development of a New Magnetic Sealing
Mechanism in reciprocating Machinery, Portugal, 2010. Pending for approval.
2. Zheng (Jeremy) Li, 2009 “Computer Aided Design (CAD) and Analysis (CAE) on an
Energy-Saving Machinery System” at the 2009 International Conference on Industrial
Technology, Australia.
3. Zheng (Jeremy) Li, 2009, “Graduate Courses Designed to Promote Future Engineers to
Face the Modern Challenging Industry”, 2009 ASEE Annual Conference, Texas, USA.
4. Zheng (Jeremy) Li, 2009, “Current Aspects and Future Trends of Education in
Mechanical and Manufacturing Majors”, Sixth International Conference on Remote
Engineering and Virtual Instrumentation (REV09), USA.
5. Zheng (Jeremy) Li, 2008 “Study and Computational Simulation an A New Type of
Biomedical Auto-suture Instrument”, 2008 International Conference on Biomedical
Engineering and Informatics, Sanya, China.
6. Zheng (Jeremy) Li, 2008 “Computational Simulation on an Automated Cryogenic
Refrigerating System”, 2008 IEEE International Symposium on Industrial
Electronics‟, England
7. Zheng (Jeremy) Li, 2008, “Advanced Graduate Course Designed to Provide Students
Exposure to Today‟s Developing and Challenging World”, 2008 International Joint
Conference on Computer, Information, System Sciences, and Engineering (CISSE08),
USA.
8. Zheng (Jeremy) Li, 2008 “Study and Computer Aided Analysis on an Endoscopic
Biomedical Instrument” 2nd International Conference on Bioinformatics and
Biomedical Engineering, Shanghai, China.
9. Zheng (Jeremy) Li, 2008 “New Engineering Courses Designed to Provide Students
Exposure to the Professional and Developing World”, 7th Annual Global
Colloquium on Engineering Education, South Africa.
10.Zheng (Jeremy) Li, 2007 “Computational Simulation On An Energy-Saving
Regenerative Refrigerating System”, 2007 International Joint Conference on
Computer, Information, System Sciences, and Engineering (CISSE07), USA.
Journal Publications:
1. Zheng (Jeremy) Li, 2009, “Computational Modeling and Design of a New Open Clip
Surgical Instrument”, International Journal of Surgery, 2009.
2. Zheng (Jeremy) Li, 2009, “Study and Development of a New Mechanism in an
Endoscopic Surgical Instrument”, International Journal of Engineering Trend, 2009.
3. Zheng (Jeremy) Li, 2009, “Design and development of a New Biomedical - Open
Surgical Instrument”, Journal of Biomedical Science and Engineering, 2009.
4. Zheng Li, 2009, “Study and Development of an Energy Saving Mechanical System”,
International Journal of Engineering Trend, 2009.
5. Zheng (Jeremy) Li, 2009, “Computer Aided Design and Modeling of a New MedicalSurgical Instrument”, Journal of Medical Devices: Evidence and Research, 2009.
6. Zheng (Jeremy) Li, 2009, “Computer Aided Modeling and Deign of a New Magnetic
Sealing Mechanism in Engineering Applications”, International Journal of
Engineering, 2009. Pending.
7. Zheng (Jeremy) Li, 2009, “Computational Modeling on an Energy-Saving Mechanical
System“, International Journal of Mechanical and Machine Theory, 2009. Pending.
8. Zheng (Jeremy) Li, 2009, “Computer Simulation and Analysis of Mass Flow in an
Energy-saving Mechanical System”, International Journals of Heat and Mass Transfer,
2009. Pending.
Research Grant and Funding:
1. University of Bridgeport Seed Grant, 2009: “Computational Modeling and Analysis of
Nanomaterial Coating Using Failure Modes and Effects Analysis (FMEA) with Focus
on Lean Manufacturing”. Approved and funded with amount of $6,776.0.
2. Sikorsky Project: Zheng (Jeremy) Li, “Computational Modeling Analysis of Rockhard
Coating on Aluminum Material of H-60 Navy Helicopter Using Failure Modes and
Effects Analysis (FMEA) with Focus on Lean Manufacturing”. Pending.
3. Connecticut Center for Advanced Technology (CCAT) and National Aerospace
Leadership Initiative (NALI) Project: “Modeling, Simulation and Optimization for
Manufacturing Process Control and Validation Using the Failure Modes and Effects
Analysis (FMEA) with a Focus on Lean Manufacturing”. Pending.
4. Connecticut Center for Advanced Technology (CCAT) and National Aerospace
Leadership Initiative (NALI) Project: “Developing a Plan and Strategy To Help
Business Transition from Aerospace To Biomedical Industry To Meet FDA
Specification and Biomedical Standard Operation Procedures”. Pending.
5. US Army Armament Research, Development and Engineering Center (ARDEC)
Project: “Nanotechnology and Advanced Material Research”. Pending.
6. US Army Armament Research, Development and Engineering Center (ARDEC)
Project: “Rapid Prototyping in Manufacturing Science Technology”. Pending.
7. Connecticut Space Grant College Consortium (CSGCC) Project: “Computational
Modeling, Simulation and Failure Modes & Effects Analysis (FMEA) of Nanomaterial
Coating Applied to the Aircraft Engines in Aerospace Industry”. Pending for approval. 8. National Science
Foundation (NSF) Project: “Computational Modeling and Simulation
of Aerodynamics in Aerospace”. To be submitted.
9. National Science Foundation (NSF) Project: “Study and development of Nanomaterial
Coating in Aerospace Application”. To be submitted.
Ausif Mahmood
Professor
Computer Science and Engineering
Chair, Program Technical Committee, CISSE 2008 (International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering)
Chair, Program Technical Committee, CISSE 2007 (International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering)
Books:
"Innovative Algorithms and Techniques in Automation, Industrial Electronics and Telecommunications",
Tarek Sobh, Khaled Elleithy, Ausif Mahmood, and Mohamed Karim, Springer, October 2007
"Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics",
Tarek Sobh, Khaled Elleithy, Ausif Mahmood,Mohammad A. Karim, Springer 2008
"Novel Algorithms and Techniques in Telecommunications and Networking”
Tarek Sobh, Khaled Elleithy, Ausif Mahmood, Springer 2009
Jani Macari Pallis
Associate Professor, Department of Technology Management
Research Grants
Jani Pallis, “Acquisition of an IBM Blue Gene for Research and Training in Simulation Based
Engineering Science”, NSF - Major Research Instrument, MRI, J. Pallis is an Instrument User,
coordinator for UB. Pending
Jani Pallis, “II-NEW: A New England Consortium for Simulation Based Engineering Science”, NSF Computing Research Infrastructure, CRI, J. Pallis is an Instrument User, coordinator for UB. Pending
Jani Pallis, “International Research and Education in Processing Voluminous Datasets from Multiple
Heterogeneous Sources”, NSF - Partnerships for International Research Education (PIRE), J. Pallis is a
senior investigator, coordinator for UB. To be submitted August, 2009.
Jani Pallis, “Establishing an Environmental Sustainability Program at the University of Bridgeport”,
University of Bridgeport – Seed Money Grant, J. Pallis is the co-PI, $7,000. Funded.
Jani Pallis, Director and Founder”Get SSET – Sport Science, Engineering and Technology”, Pre-College
Residential Summer Academy at MIT (2003-2005), Stanford University (2005), University of San Diego
(2006-2007), multiple grants and funding sources, $125,000 (approx.)
Jani Pallis, “Math To The Moon … And Beyond”, NASA, 36 units (144 lesson plans) on the math
behind the engineering and science of space flight and space operations, $271, 444. Funded
Current Publications
Pallis, J.M., Mehta, R., Aerodynamics and Hydrodynamics in Sports, New York: Springer-Verlag, to be
published 2009.
Pallis, J.M., Licata, J., Hunter, G, “Math To The Moon … And Beyond”, Cislunar Aerospace, Inc., to be
published 2009, Available online via NASA.
Auer, M., Gupta, N., and Pallis, J., (editors), Remote Engineering and Virtual Laboratory International
Conference Proceedings, Kassel University Press, 2009.
Recent Awards
Distinguished Citizen, Alpha Gamma Delta Fraternity, to be awarded at 2010 international convention.
Finalist – Academics, Women of Innovation – Academic Leadership and Innovation, Connecticut
Technology Council, 2008
University Service
Co-Chair, Remote Engineering and Virtual Instrumentation Conference 2009, International
Association of Online Engineering, Bridgeport, CT, June 22-25, 2009.
Best paper chairperson, ASEE NE Conference, Bridgeport, CT, April, 2009.
Faculty Advisor, University of Bridgeport, proposed Engineers for A Sustainable World chapter
Society of Women Engineers Counselor proposed University of Bridgeport Section
Established University of Bridgeport Society of Women Engineers Scholarship.
Academic Activities
Editorial Board (current), Sports Engineering, Sheffield, UK.
National Chair (2007-2008), Current Member, International Participation Committee, Society of Women
Engineers
Reviewer, Sports Technology
International Sports Engineering Association (past officer, board member and trustee;member, 2001-2008)
Member (2008), Society and Aerospace Technical Committee, American Institute of Aeronautics and
Astronautics.
Prabir Patra
Assistant Professor
Mechanical Engineering
Journal articles
1. "Ionically Self-Assembled Polyelectrolyte-Based Carbon Nanotube Fibers," S.Razdan, P. Patra, S.
Kar, L. Ci, R. Vajtai, A. Kukovecz, I. Kiricsi, Z. Konya, P. M. Ajayan, Chemistry of Materials.,
Publication Date (Web): June 18, 2009 (Article) DOI: 10.1021/cm803060d
2.
"In situ Synthesis of Metal Nanoparticle Embedded Free Standing Multifunctional PDMS Films,"
Anubha Goyal, Ashavani Kumar, Prabir K. Patra, Shaily Mahendra, Salomeh Tabatabaei, Pedro J. J.
Alvarez, George John, Pulickel M. Ajayan, Macromolecular Rapid Communications. Published
Online: Jun 2 2009 10:51AM. DOI: 10.1002/marc.200900174
3.
Kinetics of proliferation, migration and attachment of growth factor induced polymer nano-scaffold,
M.Chen, P.K.Patra, M.L.Lovett, D.Kaplan and S.Bhowmick (in press) J. Tissue Engineering and
Regenerative Medicine, 2009
4.
Ethylene-Octene Copolymer-Nanosilica Nanocomposites: Effects of Epoxy Resin Functionalized
Nanosilica on Morphology, Mechanical, Dynamic Mechanical and Thermal Properties, C.S.Reddy,
P.K.Patra and C.K.Das, Macromolecular Symposia, 277, 1, 119-129, 2009
5.
Nanostructured Surfaces for enhanced protein detection, V.Kunduru, J.Grosch, M.Bothara, P.K.Patra,
S.Sengupta and S. Prasad, communicated to J. Nanotechnology, 2009
6.
Conducting Polymer and Conducting Composite Strain Sensors on Textiles, Paul Calvert, Deepak
Duggal, Prabir Patra and Amit Sawhney, Molecular Crystal and Liquid Crystal, 484, 657-668, 2008
7.
"Role of Nanofiber Diameter in Adhesion and Proliferation of NIH 3T3 Fibroblasts Cells on
Electrospun Polycaprolactone Scaffold," M. Chen, P. K. Patra, S. B. Warner and S. Bhowmick, Tissue
Engineering, 13(3), 579-587, 2007
8.
"Flame Retardancy and Microstructure of Nylon 6/ Layered Silicate Nanocomposites," K.
Shanmuganathan, S. Deodhar, S. Razdan, Q. Fan, S. B. Warner, P. D. Calvert, N.Dembsey and P. K.
Patra, J.Appl.Polym.Sci, 104 (3), 1540-1550, 2007( featured in the cover page of the journal)
9.
"Inkjet printing of insoluble biopolymer and polymer complexes" P.Calvert, L. Skander, S.Iyenger,
P.Patra, PMSE preprints, 48(2), 1023-1024 (2007)
10.
"Inkjet Printing of Piezoresistive Sensors" A.Sawhney, A.Aggrawal, P.K.Patra, P.D.Calvert, T.Lo,
C.C.Chen, AATCC Review, 7(6), 42-46, 2007
11. "Influence of polyborosiloxane on the flame retardancy of polyethylene terephthalate-clay
nanocomposite," Prabir K. Patra, Yue Huo, Qinguo Fan, and Nicholas Dembsey, PMSE preprints, 96,
528-530, 2007
12. In-situ Polymerized Nylon 6/MWNT Nanocomposite Fibers, S. Mehtre, P.K.Patra, Y.K.Kim and
S.B. Warner, Research Journal of Textile and Apparel, Vol 11, 3, 35-41, 2007
13.
“Flame retardant PP/CaCO3 Nanocomposite compositions” S.Deodhar and P.Patra et al, manuscript
under revisions for publication to J.Applied.Polym. Sci, 2009.
Book chapter:
"Nanocomposite fibers from in-situ polymerization of ε- caprolactam with carbon nanotubes," Y. K. Kim
and P. K. Patra, published in chapter 29 of the book entitled "Handbook of nanofibers and nanotechnology in
textiles," Woodhead publishing, edited by Brown and Stevens. 2008.
Selected presentations/talk at conferences
1.
2.
3.
4.
5.
Flame Retardant Nanocomposites based on PP and CaCO3, S.Deodhar, P.K.Patra, Q.Fan, K.
Shanmuganathan, ACS meeting, Salt Lake City, Utah, 2009
Nanofibrous Materials for Tissue Engineering, P.Patra, M. Chen, S. Bhowmick, accepted, ACS Fall
meeting, Washington DC,2009
Prabir Patra , Sankha Bhowmick and Ming Chen, " Tissue Engineered Nanofibrous Scaffold"
conference on sustainable and responsible nanotechnology , Monterrey, Mexico, December 9-12,
2008
Paul Calvert, Prabir Patra, Amit Sawhney, Deepak Duggal and Animesh Agrawal, "Printed
Conducting Polymer Strain Sensors for Textiles", International Conference on Digital Fabrication
Technologies, Sept 16-21, Anchorage, Alaska
P. D. Calvert, P. Patra, D. Duggal, "Epoxy Hydrogels as Sensors and Actuators," SPIE 14th
International symposium on Smart Structure and Nondestructive evaluation and Health Monitoring,
San Diego, CA, March 18-22, 2007.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
P. D. Calvert, P. Patra, A. Sawhney and A. Agrawal, "Printed Conducting Polymer Strain Sensors
for Textiles," SPIE 14 International symposium on Smart Structure and Nondestructive evaluation and
Health Monitoring, San Diego, CA, March 18-22, 2007.
A. Agrawal, P. K. Patra and P. D. Calvert, "Flexible Piezoresistive Strain Sensors," presented in
NSTI, 2007 California, Santa Clara
Label Free Immuno Sensors, V.Kunduru, S.Prasad, S. Sengupta and P.Patra, NSTI, SantaClara, CA
2008.
Immuno Assay Based Micro Electrode Platformed Protein Sensors: A Comparative Study of
Polystyrene Beads vs. Nanofibers, Responsive Biomaterials for Biomedical Applications , Vindhya
Kunduru1, Shalini Prasad Prabir Patra and Sukalyan Sengupta, MRS fall meeting, 2008
Melt electrospinning of polypropylene nanofibers, C. Subramaniam, S.Ugbolue, P.Patra, MRS fall
Meeting 2008
Conformable Patch Antenna Arrays for Energy Harvesting, A.Patel, M. Vaghela, H.Bajwa and
P.Patra, submitted MRS fall meeting 2009.
Ion Exchange Functional Nanofibers, P.Patra and S.Sengupta, Submitted MRS fall meeting, 2009
Nano-structured magneto rheological hydrogel, H.Gupta, P.Patra, ASEE North East Regional
conference, Bridgeport, CT, 2009
Nano-engineered active matrix gel for targeted drug delivery in liver fenestrations, N.Mittapalli,
H.Bajwa and P.Patra, ASEE North East Regional conference, Bridgeport, CT, 2009
North East Regional conference, Bridgeport, CT, 2009
Polymer Carbon nanotube Biosensor, C.Rajyaguru, H.Bajwa, P.Patra, ASEE North East Regional
conference, Bridgeport, CT, 2009
Nanostructured Conformable Patch Antenna, A. Patel, M.Vaghela, H.Bajwa, P.Patra, ASEE North
East Regional conference, Bridgeport, CT, 2009
Energy Harvesting for Wireless Sensors using Patch Array, M.Vaghela, A.Patel, P.Patra and
H.Bajwa, ASEE North East Regional conference, Bridgeport, CT, 2009
Nanotechnology Curriculum Initiative in Connecticut, H.Bajwa, P.Patra and X.Xiong, ASEE North
East Regional conference, Bridgeport, CT, 2009
Gad J. Selig
Senior Lecturer
Technology Management
PUBLICATIONS:
Books:
Selig, Gad, Bullen, Christine and Lefave, Richard, Implementing Strategic Sourcing: A Manager‟s
Guide to World Class Best Practices for Sourcing and Outsourcing, Book under contract to Van Haren
Publishing, projected publishing year – 2010/11.
Selig, G., Implementing IT Governance: A Practical Guide to Global Best Practices in IT Management,
Van Haren Publishing, Holland, 2008.
Selig, G., Implementing IT Governance: A Pocket Guide, Van Haren Publishing, Holland, 2008.
Refereed Journal Articles, Conference Proceedings and/or Conference Presentations
Selig, Gad J., “The Critical Role of the Project Manager and Governance in Successful Strategic
Sourcing and Outsourcing Initiatives,” Eighth Annual Smart Sourcing Conference, Marriott Hotel, Jersey
City, NJ, August 24-25, 2009.
Selig, Gad J., “IT Governance – An Integrated Framework for How to Plan, Deploy and Sustain for
Competitive Advantage,” Paper to be presented and published in the Proceedings of the ASEE Zone 1
Conference, Bridgeport, CT, April 3 - 4, 2009.
Selig, Gad J. and Sobh, Tarek, “Transforming a Technology Management Master‟s Degree into an
Innovative High Growth Inter-Disciplinary Program,” Journal on Emerging Technologies in Learning,
March/April 2009.
Selig, Gad J., “Linking Enterprise Governance to IT Governance and Making It Real: Why, What and
Lessons Learned,” Proceedings of National Capital Area Chapter of ISACA Conference
on
IT
Governance, Ronald Regan International Trade Building, Washington, D.C., May 19, 2009.
Selig, Gad J.”Executive Overview of IT Governance Best Practices,” Proceedings of Pink Elephant‟s 13 th
Annual International IT Service Management Conference, Bellagio Hotel, Las Vegas, NV, February 22 –
25, 2009.
Selig, Gad J.”Implementing IT Governance: Performance Management, Management Controls, Risk
Mitigation and Enabling Technologies,” Proceedings of Pink Elephant‟s 13th Annual International IT
Service Management Conference, Bellagio Hotel, Las Vegas, NV, February 22 – 25, 2009.
Selig, Gad J., “Winning Risk Management and Mitigation Strategies: Issues, Lessons Learned and
Critical Success Factors,” Presentation to the New York City Chapter of the Project Management
Institute, AXA Building, February 18, 2009.
Selig, Gad J., “Winning Program, Project and Portfolio Management Best Practices: Excellence in
Execution,”
International Project and Engineering Management Conference IPEMAC) Proceedings, SENAC
University, Sao Paulo, Brazil, October 16 – 17, 2008.
Selig, Gad J., “The Role of the PM and PMO in Aligning IT and the Business More Effectively,” paper
presented and published in the Proceedings of Southern New England Chapter of the Project
Management Institute – Third Annual Conference, Hartford Convention Center, Hartford, CT, May 2,
2008.
Selig, Gad J., “Critical Success Factors and Best Practices for Program and Project Management
Excellence,” MundoPM Magazine (Brazil), April, 2008.
Selig, Gad J., “Transforming a Technology Management Master‟s Degree Curriculum into a Successful
Inter-Disciplinary Program for the 21st Century Needs of Global Organizations,” Paper presented and
published in the Proceedings of the ASEE Zone 1 Conference, West Point, NY, March 28 – 29, 2008.
Selig, Gad J., “The Growing Role and Importance of the Project Manager in Successful Strategic
Sourcing and Outsourcing,” Proceedings of Southern New England Chapter of the Project Management
Institute – Second Annual Conference, Hartford Convention Center, Hartford, CT, May 4, 2007.
Selig, Gad J. “Successful Business/IT Alignment, Execution and Governance Best Practices: Why, What
and How?” Moderator for CIO Panel Discussion at Monthly Meeting of Fairfield-Westchester Chapter of
SIM (Society for Information Management), March 15, 2007, Doral - Arrowood Conference Center,
White Plains, NY.
Selig, Gad J., “How to Win Deals in the Rapidly Changing World of Outsourcing – Critical Success
Factors for Vendor/Customer Collaboration and Innovation to Grow Revenues,” The 2007 Outsourcing
World Summit, February 18 – 21, 2007, Loews Hotel, Lake Las Vegas, Las Vegas. Nevada.
Selig, Gad J., “Managing Accelerating Change and Innovation,” SNEC PMI Chapter Meeting, February
6, 2007, Marriott Courtyard, Orange, CT.
UNIVERSITY COMMITTEES AND OTHER EVENTS/ACTIVITIES:
Chair, PhD Program in Technology Management Committee (Spring 2008 – Present) – developing an
inter-disciplinary PhD degree spanning the Schools of Business and Engineering and focusing on a
balance of entrepreneurship/ corporate entrepreneurship/ technology new venture creation and
current/emerging technologies (e.g. IT; environment & energy technology; financial engineering;
manufacturing, supply chain and logistics technology and systems and bio-technology and bio-medical
engineering.
Winner of the CT Business Plan Competition – Advisor to Schools of Business and Engineering teams
that won first place in the Graduate New Venture Business Category. UB teams won in 4 out of the last
7 CT Business Plan competitions. The competition is open to all universities in the State of CT and is
sponsored by the State of CT Economic Development Department, the CT Venture Group and CT
Innovation Corporation.
Member, Committee that Developed New Concentrations for the MBA, MS and the new Dual Graduate
Business and Engineering Degree Programs – 2006 – 2007
Center for Interdisciplinary Business, Engineering and Technology Leadership (CIBETL) –
Transitioned the CBIT Board to the CIBETL Board, consisting of senior industry executives who
provide advise and counsel for select education programs and internship opportunities for UB
Engineering and Business students – 2003 – Present.
International Student Recruitment Pilot – Conceived of the idea to use current international students to
visit their home country universities and help identify future UB students. Worked with Admissions to
implement plan.
UB Accelerator/Incubator – UB was recently approached by Connecticut Innovation to assess our
interest in establishing a technology accelerator/incubator on the campus of UB. We are in the process
of conducting a high level feasibility study. There seems to be lots of interest in this idea at this time
from the SOB, SOE, City of Bridgeport and various economic development entities in the State of CT
and other Fairfield county towns.
IAMOT Accreditation of the MS in TM Degree Program – UB‟s MS in TM Degree program is one of
the first programs to become a candidate for accreditation by IAMOT (International Association of
Management of Technology). This will help to validate the UB program‟s peer review standing and add
a credential to help market both the MS and the potential PhD in TM program to a global audience.
PROFESSIONAL ASSOCIATIONS, MEMBERSHIPS, HONORS, CERTIFICATIONS and
ADDITIONAL INFORMATION:
COP Certification - Awarded the “Certified Outsourcing Professional (COP)” certificate by the
International Association of Outsourcing Professionals, December 2006.
Elected into Delta Mu Delta, the National Honor Society in Business Administration, June, 2004
Certified as a Project Management Profession (PMP) by PMI (Project Management Institute) and
member of PMI, January, 2003 to Present
Winner – CT Business Plan Competitions – Advisor to MBA and TM student teams that won the CT
Business plan competition in the Fall, 2005, Spring 2006, Fall 2006 and Fall 2007.
COP Certification - Awarded the “Certified Outsourcing Professional (COP)” certificate by the
International Association of Outsourcing Professionals, December 2006
Member, International Association of Outsourcing (IAOP) Professionals, 2006 – Present
Elected into Delta Mu Delta, the National Honor Society in Business Administration, June, 2004
Certified as a “Project Management Profession (PMP),” by PMI (Project Management Institute) and
member of PMI, January, 2003 to Present
Member, Society of Information Management (SIM), June 2003 – Present)
Tarek Sobh
Professor
Computer Engineering




Principal Publications of last five years: (Sample; total over 200 publications)
E. Kongar, P. Kontogiorgis, N. Russo and T. Sobh, " Women in Science, Engineering and
Technology: Changing Roles and Perceptions within the Technical Services Industries,'' In the
Journal of Engineering and Applied Sciences, Volume 4, number 1, pp 46-50, 2009.
E. Kongar, T. Sobh and M. Baral,"A Two-Step Data Envelopment Analysis Approach for
Efficient Engineering Enrollment Management,'' In the International Journal of Engineering
Education, Volume 25, number 2, pp. 391-402, 2009.
Memushaj and T. Sobh, "Using Grapheme n-grams in Spelling Correction and Augmentative
Typing Systems,'' In the Journal of New Mathematics and Natural Computation, Volume 4,
issue 1, pp 87-106, March 2008.
T. Sobh and S. Patel,"On-line Virtual Real Time E-Collaboration: An Innovative Case Study on
Research Teleconferencing Management,'' In the International Journal of Online Engineering,
Volume 4, Number 4, pp 57-59, November 2008.


















M. Mohammed, V. Babriya and T. Sobh, " Modeling a Deburring process Using Delmia,'' In the
Journal of Engineering and Applied Sciences, Volume 3, number 11, pp 835-847, 2008.
G. Selig and T. Sobh, " Transforming a Technology Management Master's Degree into an
Innovative High Growth Inter-Disciplinary Program,'' In the Journal of Engineering and Applied
Sciences, Volume 3, number 12, pp 937-942, 2008.
T. Sobh, R. Cousens and S. Patel, "Course Scheduler: An Automated Schedule Generator,'' In
Advances in Computer Science and Engineering, Volume 1, issue 1, pp 25-46, March 2007.
T. Sobh, "A Randomized Parallel Algorithm for Computing a Complete Histogram of an Image
in Log(n) Steps with Optimal Memory Requirements Using Hypercubes,'' In Advances in
Computer Science and Engineering, Volume 1, issue 1, pp 47-59, March 2007.
E. Kongar, A. Abu Zaghleh and T. Sobh, "Online Customization and Enrollment Application
Network (OCEAN),'' In the International Journal of Emerging Technologies in Learning,
Volume 2, Number 3, September 2007.
T. Sobh and K. Elleithy, "Advances in Computer, Information, and Systems Sciences, and
Engineering", In the Journal of New Mathematics and Natural Computation, Volume 3, issue 3,
pp 366-369, November 2007.
Tarek Sobh, Rajeev Sanyal and Sarosh Patel, " RISCBOT: A Web-Enabled Mobile Platform.'' In
Servo Magazine, pp 37-41, March 2006.
Sarosh Patel, Rajeev Sanyal and Tarek Sobh, " RISCBOT: A WWW-Enabled Mobile
Surveillance and Identification Robot.'' In the Journal of Intelligent and Robotic Systems,
Volume 45, Number 1, pp 15-30, May 2006.
S. Patel and T. Sobh, "Online Automation and Control". In the Journal of Online Engineering,
Volume 2, Number 3, August 2006.
S. Patel and T. Sobh, " Laboratory Corner Paper: Online Automation and Control; An
Experiment in Distance Engineering Education.'' In the IEEE Magazine on Robotics and
Automation, Volume 13, Number 4, pp 91-95, December 2006.
R. Petrova, A. Tibrewal, and Tarek M. Sobh, "An Electronic Web-Based Assessment System.''
In the Journal of STEM Education: Innovations and Research, Volume 7, Issues 3 & 4, pp 4457, December 2006.
T. Sobh and A. Tibrewal, "Parametric Optimization of Some Critical Operating System
Functions - An Alternate Approach to the Study of Operating Systems Design.'' In the Journal of
STEM Education: Innovations and Research, Volume 7, Issues 3 & 4, pp 58-79, December
2006.
B. Wang, D. Hoang, I. Daiz, C. Okpala and T. M. Sobh, "An Experimental Collective
Intelligence Research Tool.'' In the Computing Journal, Volume 3, issue 3, pp 40-50, April 2005.
R. Mihali and T. Sobh, "Effective Simulation and Control techniques for Alleviating the Access
to High Cost Manipulators.'' In the Journal of STEM Education: Innovations and Research,
Volume 6, issues 3&4, pp 21--28, December 2005.
Sobh, Tarek M. and Toundykov, Daniel Y., "Kinematic Synthesis of Robotic Manipulators
From Task Descriptions.'' In the IEEE Magazine on Robotics and Automation (IEEE RAM),
Volume 11, No. 2, pp 78-85, June 2004.
V. Vacic and T. Sobh, "The Vehicle Routing Problem with Time Windows.'' In the Computing
Journal, Volume 3, issue 2, pp 72-80, November 2004.
Mohammed Mohammed, Ayssam Elkady and Tarek Sobh, "A New Algorithm for Measuring
and Optimizing the manipulability Index", submitted to International Journal of Advanced
Robotic Systems, I-Tech Education and Publishing, Vienna, Austria.
Vipul Babriya, Mohammad Mohammad and Tarek Sobh. Modeling a Deburring Process, Using
DELMIA V5®, Journal of Engineering and Applied Sciences [Medwell], 2008, 3(11): p. 835847.








Tarek Sobh, Rick Cousens and Sarosh Patel, "Course Scheduler: An Automated Schedule
Generator". In the Journal of Advances in Computer Science and Engineering, Volume 1, Issue
#1, pp 25-46, March 2007.
Tarek Sobh, X. Zhu and S. Patel, "Visualization of Tolerance for Manufacturing''. In the Journal
of Engineering and Applied Sciences, Volume 2, Issue #2, pp 299-304, 2007.
Tarek Sobh, Khalid Elleithy and Sarosh Patel, "Reverse Engineering of VLSI Chips: A
Roadmap''. In the Journal of Engineering and Applied Sciences, Volume 2, Issue #2, pp 290-298,
2007.
Sarosh Patel and Tarek Sobh, "Laboratory Corner Paper - Online Automation and Control: An
Experiment in Distance Engineering Education", in the IEEE Magazine on Robotics and
Automation, Volume 13, Issue #4, pp 91-95, December 2006.
Tarek Sobh, Sarosh Patel and Rajeev Sanyal, "RISCBOT". Published in the Servo Magazine, pp
37-41, March 2006.
Sarosh Patel and Tarek Sobh, “Online Automation and Control: An Experiment in Distance
Engineering Education”. In the Journal of Online Engineering, Volume 2, Issue #3, August 2006.
Sarosh Patel, Tarek Sobh and Rajeev Sanyal, “RISCBOT: A WWW Enabled Mobile
Surveillance and Identification Robot”. In the Journal of Intelligent and Robotic Systems,
Volume 45, Issue #1, pp 15-30, May 2006.
Tarek M. Sobh, Bei Wang and Sarosh Patel, "A Mobile Wireless and Web-based Analysis Tool
for Robot Design and Dynamic Control Simulation from Task Points Description''. In the
Journal of Internet Technology, Volume 4, Issue #1, pp 153-161, July 2003.
Book Chapters:
1. Ayssam Elkady, Galal Elkobrosy, Sarwat Hanna and Tarek Sobh, "Cartesian Parallel
Manipulator Modeling, Control and Simulation", in "Parallel Manipulators, Towards New
Applications", ISBN 978-3-902613-40-0, April 2008.
2. Ayssam Elkady, Mohammed Mohammed, Eslam Gebriel, and Tarek Sobh, "Intelligent Behavior
Modeling and Control for Mobile Manipulators", on "Foundation on Computational
Intelligence" to be published in "Studies in Computational Intelligence" published by Springer
Verlag, Germany 2009.
3. Ayssam Elkady and Tarek Sobh ,"Web-Based Control of Mobile Manipulation Platforms via
Sensor Fusion" in Web-based control and robotics education, Series: Intelligent Systems,
Control and Automation: Science and Engineering , Vol. 38. Editor: Tzafestas, Spyros G., 2009,
ISBN: 978-90-481-2504-3.
4. Sarosh Patel, Rajeev Sanyal and Tarek Sobh, “RISCBOT: A WWW Enabled Mobile
Surveillance Telerobotic System.” Published in the book “New Developments in Robotics
Research”, Nova Publishers, ISBN: 1-59454-593-6.




Conference Papers:
Mohammed Mohammed, Ayssam ElKady and Tarek Sobh, "New concept in optimizing
Manipulability index of serial Manipulators, using SVD method" , CISSE 07.
Ayssam Elkady and Tarek Sobh "Design and Implementation of a Multi-sensor Mobile
Platform", CISSE 2008.
Vipul Babriya and Tarek Sobh. Modeling a Deburring Process, Using DELMIA V5®, CISSE
Conference December 5-13, 2008,Bridgeport CT.
Tarek Sobh and Sarosh Patel, "On-line Virtual Real-Time E-Collaboration: An Innovative Case
Study on Engineering Research Teleconferencing Management". In the proceedings of the
International Conference on Engineering Education, Instructional Technology, Assessment, and
E-learning (EIAE 07) CISSE Online E-Conference, December, 2007.



















Sarosh Patel and Tarek Sobh, “Online Automation and Control: An Experiment in Distance
Engineering Education”. In the proceedings of the International Remote Engineering, Virtual
Instrumentation Symposium (REV 06), Maribor, Slovenia, June, 2006.
Sarosh Patel and Tarek Sobh, “Online Automation and Control: An Experiment in Distance
Engineering Education”. In the proceedings of the American Society for Engineering Education
(ASEE 06) Annual Conference, Worcester, Massachusetts, USA, March 2006.
Sarosh Patel, Tarek Sobh and Rajeev Sanyal, “RISCBOT: An Experimental Telerobotic
System”. In proceedings of the Annual International Conference on Robotics and Applications
(RA 05), Cambridge, Massachusetts, USA, October 2005.
Tarek Sobh, Rajeev Sanyal and Sarosh Patel, "A WWW-Enabled Mobile Platform for
identification and surveillance applications." In proceedings of the IEEE International
Symposium on Industrial Electronics Society (ISIE 05), Dubrovnik, Croatia, June 2005.
Tarek M. Sobh, Bei Wang, and Sarosh H. Patel, "A Robot Design and Dynamic Control
Simulation Software - Solutions from Task Point Descriptions.'' In proceedings of the 29th
Annual International Conference of the IEEE Industrial Electronics Society (IECON 03),
Virginia, November 2003.
Scientific and professional societies:
Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), 1988-1991
(Student Member), 1991-1997 (Member), 1997-present (Senior Member).
Senior Member of the Society of Manufacturing Engineers (SME), 1996-present.
Member of the American Society of Engineering Education, 1995-present.
Sample of Honors, Awards and Grants:
Honorary Membership, Delta Mu Delta (The National Honor Society for Business
Administration, Connecticut Theta Delta Chapter), for exceptional performance and
achievements in managing the School of Engineering as a business unit at the University of
Bridgeport from 1999-2002.
AMSE Honorary Life Membership awarded October 1999.
World Automation Congress (WAC 98) Best Paper Award, for the paper entitled: “Automated
Tolerance Specification Across Sensing, Design and Manufacturing,” Alaska, May 1998.
Sample of Funded Research Contracts:
U.S. Army Research Center Grant for project entitled: “Hybrid Projectile Design”, 8/1/085/31/09, $50,000
Connecticut Center for Advanced Technology Grant for project entitled: “Center for Simulation,
Modeling and Analysis for Robotic Applications”, 1/1/08-12/31/08, $40,000
``Development of a high reliability, multi-algorithm facial recognition system based on web
services,'' IQEntertainment, June 2002, through June 2003, $125,000 shares, Funded.
``NSF Engineering Design Workshop'', NSF, held on UB's campus in April 2002, Funded.
``Exploring Academic and Industrial Training and Exchange Possibilities in Germany'', DAAD
Fund, $7,500, March 2002, Funded.
``Rapid Prototyping in Support of Manufacturing and Automation'', United Nations Develoment
Program (UNDP), Transfer of Knowledge through Expatriate Nationals (TOTKEN) Fund,
$3,500, December 2001, Funded.
``NSF Engineering Assessment Workshop'', NSF, held on UB's campus in September 2001,
Funded.
``Tolerance Analysis for Sensing, Design, and Manufacturing'' Future Engineering Systems,
May 1996, through September 1998; $76,234, Funded.
























``Establishing the Robotics, Intelligent Sensing and Control (RISC) Laboratory at the University
of Bridgeport,'' Future Engineering Systems, January 1996, through May 1997; $33,000,
including $16,500 in University of Bridgeport matching funds, Funded.
``Sensing Strategies for Advanced Manufacturing'', ARPA, Sept 1, „93, through Aug. 31, „96;
$886,718; Funded.
``Sensing for Inspection and Reverse Engineering'', Augmentation Awards for Science and
Engineering Research Training, Defense Advanced Research Projects Agency (DARPA) /
Office of Naval Research (ONR), July 1, „93, through June 30, „96; $244,470; Funded.
``Utilizing URK (Utah Robot Kit) through Multi-Media Technology'', Office of Naval Research,
July 1, 1994, through March 31, 1995; $40,000; Funded.
``CISE Research Instrumentation'', NSF, January 1, 1994, through December 31, 1994; $37,310
plus $18,656 in University of Utah matching funds, Funded.
``Real-Time Control Systems'', Univ. of Utah Research Equipment Support Funds, July 1, „93,
through June 30, „94; $14,225; Funded.
``CISE Research Instrumentation'', NSF, January 1, 1993, through December 31, 1993; $57,606
plus $28,803 in University of Utah matching funds, Funded.
``Computer Aided Reverse Engineering'', University of Utah Research Committee, Nov. „92,
through Oct. „93; $4,924; Funded.
Institutional and professional service in the last five years (Sample):
Member, President Cabinet (2008-present).
Member, University Planning Review Board (2002-present).
Member, University Planning Council (2001-present).
Member, President Advisory Council (2000-present).
Consulting, Patents, etc.: (Sample)
Standard and Poor‟s Society of Industry Leaders. [2006 – present] Board Member.
Nitron Advisors, LLC. ). [2006 – present] Board Member, Circle of Experts.
Scientific Advisory Board, the International Association of Online Engineering. [2006 – present]
Board Member and Founding Co-Chair.
Connecticut Pre-Engineering Program (CPEP). [2004 – present] Board Member.
The Northeast Center for Computers and Information Systems Security (NECCISS). [2004 –
present] Board Member.
IQ Inc. [6/2002 – 12/2004] Developing EX Match and Faces Identification software tools.
Caesar, Rivise, Bernstein, Cohen, Pokotilow, Ltd., Law Offices. [6/2002 – 8/2002] Expert
Consultant.
Merit International Institute of Technology. [9/2000 – 8/2002] Developing accreditation and
program requirements for eight engineering programs (India).
Tennessee Board of Regents. [1/2001] External Reviewer, Master of Science in Computer
Science program, TTU.
Arnold and Porter, Attorneys at Law. [9/2000 – 1/2001] Expert Consultant.
Data Solutions, Inc. [6/98 – 9/98] Team leader (Led a team of 40 programmers), Y2K
compliance project, 20+ New York Hospitals, approximately 20,000 compute platforms (in
networked environments) were checked, prepared, and certified for Y2k compliance.
The World Bank and Purdue University. [6/97 – 6/98] Setting up infrastructure to support
Robotics and Automation programs in Malaysia.
Patents and Inventions:




















T. Sobh and R. Mihali, “Raffle-Based Collaborative Buying and Selling System,” Patent
Pending.
T. Sobh, A. Mahmood, “Multi Dimensional,Multi-Transform (MDMT) Adaptive Face
Recognition System”, Patent Pending.
T. Sobh, R. Mihali, A. Rosca and T. Alameldin, “Normalized Distributed Exchange System”,
Patent Pending.
Recent Professional development activities (Sample)
Recent Editorial Duties: (Sample)
Editorial Board Member - International Journal of Online Engineering, since June 2006.
Editorial Board Member – Advances in Computer Science and Engineering, since December
2006.
Associate Editor, International Journal of Advanced Robotic Systems, since January 2007.
Member, Editorial Board, Journal of Computing, since 2002.
Associate Editor of the International Journal of Science and Technology since 2000.
Research Editor of the Journal Industrial Robot, published by MCB University Press, since
January 1999.
Guest Editor, Special Edition of the “Journal of New Mathematics and Natural
Computing”, November 2007
Member, Editorial Board, Journal of Computing. Published by the Ternopil Academy of
National Economy, Ukraine, since 2002.
Associate Editor of the International Journal of Science and Technology.
Recent Conferences Duties (Sample):
Chairperson, International Joint Conferences on Computer, Information, and Systems Sciences,
and Engineering, December 4-12, 2009
General Chairperson, 2009 Remote Engineering and Virtual Instrumentation International
Conference, June 22-25, 2009
Chairperson, 2009 American Society of Engineering Education Northeast Region Conference,
April 3-4, 2009
General Chair, Second International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CISSE 2006), December 2006 (http://www.cisse2006.org).
General Chair, International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CISSE 2005), December 2005 (http://www.cisse2005.org).
Other assigned duties:
Work on developing international sites and collaborative agreements for the University of
Bridgeport in several countries.
Creating the interdisciplinary laboratory: “Robotics, Intelligent Sensing, and Control (RISC),” at
the Department of Computer Science and Engineering, University of Bridgeport.
Programs to improve teaching and professional competence:
Participated in over 20 workshops and conference in the last four years and a regular participant
in the Engineering Dean‟s Meetings and the ASEE ABET and assessment workshops.
Abhilasha Tibrewal
Lecturer
Computer Science and Engineering
Service to the Department
 ABET Coordinator since Sept 2007
 Faculty Advisor, UPE, honor society of computing sciences since May 2008
Service to/for the University
 Serving on Academic Review Committee (since Fall 2005) and Academic Appeals Committee (Summer
2006)
Service to Profession/Discipline
Conference Presentations & Organization
 A. Tibrewal “Tower of Hanoi – An Algorithm Unwrapped” as part of the “Workshop on Engineering
Education for Grades 7-12”, ASEE Spring 2009 Northeast Conference, Bridgeport, April 2009.
 Member, Organizing Committee “Workshop on Engineering Education for Grades 7-12”, ASEE Spring
2009 Northeast Conference, Bridgeport, April 2009.
Grants


Member of Transatlantic team(K.Henke et al) that put together the proposal entitled “EU-US
ATLANTIS PROGRAMME COOPERATION IN HIGHER EDUCATION AND TRAINING
TRANSATLANTIC DEGREE CONSORTIUM PROJECT: RETEMA: Remote Engineering and
Technology Management”. Submitted in Feb 2009.
A. E. Santiago, J. Dichter, A. Tibrewal, D. Burton and N. Romalis “HP Technology for Teaching Grant
Initiative 2007”. Submitted to HP, Feb 2007.
Reviewer
 Reviewer, CISSE 2007 and 2008.
Member
 Member, ACM, since May 2001.
 Member, ASEE, since June 2002.
 Member, SWE, since May 2008.
Awards



Selected for recognition as UB‟s Distinguished Professor of the Year for the academic year 2008-2009.
Member, Upsilon Pi Epsilon, Honors Society for the Computing and Information Disciplines, since 2002.
Member, Phi Kappa Phi, National Honors Society, since 2002.
Zhengping Wu
Assistant Professor
Computer Science and Engineering
Publications
Book Chapter
Zhengping Wu, Alfred C. Weaver, “A Privacy Preserving Enhanced Trust Building Mechanism for
Web Services,” Trust Management, Icfai University Press, April 2008.
Journal Papers
Zhengping Wu, “Features, Measurements, and Challenges: A Comparative Study of Federated Trust
Management Systems,” International Journal of Information Assurance and Security (under review).
Zhengping Wu, “A Comprehensive Comparison of Trust Management Systems for Federation,”
Security and Communication Networks (under review).
Zhengping Wu, Alfred C. Weaver, “Web-service-based security token exchange for federated trust
management,” International Journal of Web Engineering and Technology (under review).
Zhengping Wu, Alfred C. Weaver, “Federated trust management,” Computers and Security Journal
(under review).
Zhengping Wu, Alfred C. Weaver, “Using web service enhancements to establish trust relationships
with privacy protection,” International Journal of Web Services Research, Vol. 6, No. 1, 2009.
Zhengping Wu, Alfred C. Weaver, “Requirements of federated trust management for service-oriented
architectures,” International Journal of Information Security, Vol. 6, No. 5, 2007.
Zhengping Wu, Jiajun Bu, Chun Chen, “Dynamic programming based video segmentation,” Journal of
Computer Aided Design and Computer Graphics, Vol. 14, No. 8, 2002.
Ming Zhao, Chun Chen, Zhengping Wu, “Hierarchy optical flow based semi-automatic spatial-temporal
video segmentation,” Journal of Image and Graphics, Vol. 7, No. 8, 2002.
Conference Papers
Zhenging Wu, Lifeng Wang, “An Enforcement Architecture for Security and Trust Policies in Federated
Web-service-based Systems,” Proceedings of the 33th Annual IEEE International Computer Software
and Applications Conference, Washington, USA, July 2009.
Zhenging Wu, “A Semantic Approach for Trust Information Exchange in Federation Systems,”
Proceedings of the 23rd IEEE International Conference on Advanced Information Networking and
Applications, Bradford, UK, May 2009.
Zhenging Wu, Yuanyao Liu, Lifeng Wang, “Dynamic Policy Conflict Analysis in Operational Intensive
Trust Services for Cross-domain Federations,” Proceedings of the 2009 International Conference on
Intensive Applications and Services, Valencia, Spain, April 2009.
Zhenging Wu, “Introduction of WebOS into Operating System Course Instruction,” Proceedings of the
2009 ASEE Northeast Conference, Connecticut, USA, April 2009.
Hao Wu, Zhenging Wu, “Fuzzy Control of Enrollment Policy for Group in Social Network,”
Proceedings of the 2009 ASEE Northeast Conference, Connecticut, USA, April 2009.
Lifeng Wang, Zhenging Wu, “An Enforcement Architecture for Interconnection of Social Network
Applications,” Proceedings of the 2009 ASEE Northeast Conference, Connecticut, USA, April 2009.
Yuanyao Liu, Zhenging Wu, “Policy-based Security Control in Social Networking,” Proceedings of the
2009 ASEE Northeast Conference, Connecticut, USA, April 2009.
Zhenging Wu, “Authentication Information Alignment for Cross-Domain Federations,” Proceedings of
the 2008 IEEE International Joint Conferences on Computer, Information, and Systems Sciences, and
Engineering, Bridgeport, USA, December 2008.
Zhenging Wu, “A Comprehensive Comparison of Trust Management Systems for Federation,”
Proceedings of the 4th International Conference on Collaborative Computing: Networking,
Applications and Worksharing, Orlando, USA, November 2008.
Zhengping Wu, Alfred C. Weaver, “Alignment of Authentication Information in Federated Systems, ”
Proceedings of the 11th IEEE International Enterprise Computing Conference, Maryland, USA,
October 2007.
Zhengping Wu, Alfred C. Weaver, “Hybrid Trust Information Exchange for Federated Systems,”
Proceedings of the 3rd IEEE International Symposium on Dependable, Autonomic and Secure
Computing, Maryland, USA, September 2007.
Zhengping Wu, Alfred C. Weaver, “Using Web Services to Exchange Security Tokens for Federated
Trust Management,” Proceedings of the 2007 IEEE International Conference on Web Services, Utah,
USA, July 2007.
Zhengping Wu, Alfred C. Weaver, “Using web service enhancements to bridge business trust
relationships,” Proceedings of the 4th Annual Conference on Privacy, Security and Trust, Ontario,
Canada, October 2006.
Zhengping Wu, Alfred C. Weaver, “Requirements of federated trust management for service-oriented
architectures,” Proceedings of the 4th Annual Conference on Privacy, Security and Trust, Ontario,
Canada, October 2006.
Zhengping Wu, Alfred C. Weaver, “Bridging trust relationships with web service enhancements,”
Proceedings of the 2006 IEEE International Conference on Web Services, Illinois, USA, September
2006.
Zhengping Wu, Alfred C. Weaver, “Application of fuzzy logic in federated trust management for
pervasive computing,” Proceedings of the 30th Annual IEEE International Computer Software and
Applications Conference, Illinois, USA, September 2006.
12. Zhengping Wu, Alfred C. Weaver, “Fuzzy model of uncertainty in federated trust management,”
Proceedings of the 26th North American Fuzzy Information Processing Society Annual Conference,
Quebec, Canada, June 2006.
Zhengping Wu, Alfred C. Weaver, “A privacy preserving enhanced trust building mechanism for web
services,” Proceedings of the 3rd Annual Conference on Privacy, Security and Trust, New Brunswick,
Canada, October 2005.
Zhengping Wu, Alfred C. Weaver, “Dynamic trust establishment with privacy protection for web
services,” Proceedings of the 2005 IEEE International Conference on Web Services, Florida, USA, July
2005.
Zhengping Wu, Alfred C. Weaver, “Token-based dynamic trust establishment for web services,”
Proceedings of the 43th ACM Southeast Conference, Georgia, USA, March 2005.
Zhengping Wu, Jiajun Bu, Chun Chen, “Detection and location of people in video streams by fusion of
color, edge and motion information,” Proceedings of the 2002 IEEE International Conference on Image
Processing, New York, USA, September 2002.
Zhengping Wu, Chun Chen, “User-assisted video segmentation system for visual communication,”
Proceedings of the IS&T/SPIE 14th Annual Symposium on Electronic Imaging, California, USA,
January 2002.
Zhengping Wu, Chun Chen, “A moving object segmentation technique using dynamic programming,”
Proceedings of the 5th Asian Conference on Computer Vision, Melbourne, Australia, January 2002.
Zhengping Wu, Chun Chen, “Information-fusion-based foreground extraction for video streams,”
Proceedings of the 2001 International Workshop on Very Low Bitrate Video Coding, Athens, Greece,
October 2001.
Zhengping Wu, Chun Chen, “A new foreground extraction scheme for video streams,” Proceedings of
the 9th ACM International Multimedia Conference, Ontario, Canada, September 2001.
Zhengping Wu, Chun Chen, Ying Qian, “Multi-focus image fusion based on second generation wavelet
transform,” Proceedings of the 2001 IASTED International Conference on Signal and Image Processing,
Hawaii, USA, August 2001.
Zhengping Wu, Baiyang Ji, Chun Chen, “An object oriented wavelet transformation image coding
scheme for low bit-rate transmission,” Proceedings of the 2001 IASTED International Conference on
Signal Processing, Pattern Recognition and Applications, Rhodes, Greece, July 2001.
Zhengping Wu, Erdan Gu, Chun Chen, “Extraction foreground in moving image,” Proceedings of the
2nd International Symposium on Image and Signal Processing and Analysis, Pula, Croatia, June 2001.
Professional Services
Reviewer of IEEE Transactions on Services Computing
Reviewer of IEEE Transactions on Systems, Man, and Cybernetics (Part A)
Reviewer of IEEE Transactions on Industrial Electronics
Reviewer of the World Wide Web Journal
Reviewer of the 2008 IEEE International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering
Technical Program Committee Member of the 2009 ASEE Northeast Conference
Technical Program Committee Member of the 2009 International Conference on Intensive Applications
and Services
Technical Program Committee Member of the 2009 International Conference on Advanced Service
Computing
Technical Program Committee Member of the 2010 International Conference on Intensive Applications
and Services
Session Chair of the 2009 ASEE Northeast Conference
Session Chair of the 33th Annual IEEE International Computer Software and Applications Conference
National Science Foundation Proposal Review Panelist 2009
School Services
Committee Member of the New Faculty Search Committee in the Department of Computer Science and
Engineering (Fall 2008)
Committee Member of the qualification exam for the Ph.D. program of Computer Science and
Engineering (Fall 2008)
Committee Member of the New Faculty Search Committee in the Department of Computer Science and
Engineering (Spring 2009)
Committee Member of the admission committee for the Ph.D. program of Computer Science and
Engineering (Spring 2009)
Community Service
Judge of the Science Fair for the Bridgeport public school system (Spring 2009)
Funding Activities
National Science Foundation (NSF), “Architectural Innovation of Policy-based Management for Crossdomain Collaboration,” $400,000 (PI) (pending)
The Computing Community Consortium (CCC) and the Computing Research Association (CRA),
“Computing Innovation Fellows Project: Performance and Reliability Analysis for Cloud Computing
Services,” $115,000 (Mentor, with Rehab El Kharboutly) (pending)
Department of Energy (DOE), “Research and Development of Hydrogen Sensor Technologies,”
$955,960 (Co-PI, with Linfeng Zhang) (pending)
University of Bridgeport Research Seed Money Grant, “A New Policy-based Management Architecture
for Cross-domain Federation,” $6,409 (PI)
Xingguo Xiong
Assistant Professor
Electrical Engineering and Computer Engineering
FUNDED PROJECTS




Hassan Bajwa, Xingguo Xiong, "Area Efficient Low Power SRAM Design", designed for MOSIS
Educational Program (Research), 10/14/2008. This proposal is funded by MOSIS with allocated
proposal ID: 5031WN8DMQ. The chip will be fabricated for University of Bridgeport at no cost.
According to the previous price quote from MOSIS, this is equivalent to a funding of $125000 for
the chip fabrication.
Xingguo Xiong (PI), Linfeng Zhang (co-PI), Hassan Bajwa (co-PI), "A Bulk-micromachined MEMS
Comb Vibratory Gyroscope", UB seed money grant proposal, submitted to Office of Sponsored
Research, University of Bridgeport on 11/14/2008, Funds requested: $6930.00.
Hassan Bajwa (PI), Xingguo Xiong (co-PI), "Dynamically Configured, Low Power SRAM Design",
UB seed money grant proposal, submitted to Office of Sponsored Research, University of Bridgeport
on 11/14/2008, Funds requested: $6650.00.
Linfeng Zhang (PI), Angela Santiago (co-PI), Xingguo Xiong (co-PI), "Integration of the platinum
nanoparticles and carbon nanotubes in silicon-based micro fuel cell and silicon-based
chemical/biological sensor", UB seed money grant proposal, submitted to Office of Sponsored
Research, University of Bridgeport on 11/14/2008, Funds requested: $6864.00.
PROJECTS APPLICATION
 Prabir Patra, Hassan Bajwa, Navarun Gupta, Xingguo Xiong, "Nanotechnology Curriculum
Integrating Undergraduate Education and Research", submitted to NSF (National Science
Foundation), EEC - Nanotechnology Undergraduate Education (NUE) program on 04/29/2009,
funding required: $197,247.00, pending.








Joined The Applied Nanotechnology Consortium (TANC) sponsored by the Connecticut Center for
Advanced Technology (CCAT), 11/25/2008. Solicitation Number: W15QKN-09-X-0286. The
interest is to work with the U.S. Army RDECOM-ARDEC to advance the state-of-technology in the
research, education, design and manufacture, including secondary operations, of products using
nanotechnology materials, and for producing and sustaining systems incorporating such materials.
Hassan Bajwa, Xingguo Xiong, "Area Efficient Low Power SRAM Design", IBM mini proposal for
SRAM libraries, 10/29/2008.
Collaboration with Prof. Linfeng Zhang for his NSF (National Science Foundation) research
proposal “Hybrid theoretical/experimental studies of fundamental issues in the microsystems related
to hydrogen”, 07/22/2008.
Xingguo Xiong, "MEMS/VLSI in Hybrid Projecticle Project". quad-chart proposal submitted to
Army Research, Development and Engineering Center (ARDEC@Picatinny, NJ) on 07/08/2008.
Xingguo Xiong, "A Built-In Self-Repair Technique for Capacitive MEMS Devices", research
proposal submitted to Army Research, Development and Engineering Center (ARDEC@Picatinny,
NJ) on 04/15/2008.
Joined the international research consortium with SynTest, Inc. May 2008-present, aiming at
research topics in VLSI testing.
Xingguo Xiong, Linfeng Zhang, Junling Hu, “MEMS inertial navigation system for ARDEC”,
project proposal submitted to Army Research, Development and Engineering Center
(ARDEC@Picatinny, NJ) on 09/24/2007.
Linfeng Zhang, Junling Hu, Xingguo Xiong, "Chem/Bio sensor/sensor system and Micropower
device", project proposal submitted to Army Research, Development and Engineering Center
(ARDEC@Picatinny, NJ) on 09/24/2007.
JOURNAL/CONFERENCE PAPERS
1. Xingguo Xiong, Linfeng Zhang, Junling Hu, Lawrence Hmurcik, "Introducing the Small World –
Developing MEMS/Nanotechnology Curriculum", 2009 ASEE (The American Society for
Engineering Education) Annual Conference & Exposition, Austin, TX, Jun. 14-17, 2009.
2. Linfeng Zhang, Xingguo Xiong, Junling Hu, “Integrating Alternative Energy Technology into
Engineering Education”, 2009 ASEE (The American Society for Engineering Education) Annual
Conference & Exposition, Austin, TX, Jun. 14-17, 2009.
3. Xingguo Xiong, Linfeng Zhang, Lawrence Hmurcik, Wen-Ben Jone, "Self-repairable MEMS Comb
Accelerometer", 2009 Northeast ASEE (The American Society for Engineering Education)
Conference, Bridgeport, CT, Apr. 3-4, 2009.
4. Hassan Bajwa, Prabir Patra, Xingguo Xiong, “Nanotechnology Curriculum Initiative in Connecticut”,
2009 Northeast ASEE (The American Society for Engineering Education) Conference, Bridgeport,
CT, Apr. 3-4, 2009.
5. K. Ren, J. Hu, X. Xiong, L. Zhang, and J. Wei, "Validation of Turbulence Models in STAR-CCM+
by N.A.C.A. 23012 Airfoil Characteristics", 2009 Northeast ASEE (The American Society for
Engineering Education) Conference, Bridgeport, CT, Apr. 3-4, 2009.
6. Linfeng Zhang, Xingguo Xiong, Junling Hu, “Developing a new graduate program in sustainable
energy engineering”, 2009 Northeast ASEE (The American Society for Engineering Education)
Conference, Bridgeport, CT, Apr. 3-4, 2009.
7. Haifeng Dong, Xingguo Xiong, "Design and Analysis of a MEMS Vibratory Comb Gyroscope",
2009 Northeast ASEE (The American Society for Engineering Education) Conference, Bridgeport,
CT, Apr. 3-4, 2009.
8. Yan Han, Xingguo Xiong, Hassan Bajwa, "A Low Power CMOS Comparator Using Logic Shutdown Technique", 2009 Northeast ASEE (The American Society for Engineering Education)
Conference, Bridgeport, CT, Apr. 3-4, 2009.
9. Isaac Macwan, Xingguo Xiong, Lawrence Hmurcik, "Dual Slope ADC Design from Power, Speed
and Area Perspectives", 2009 Northeast ASEE (The American Society for Engineering Education)
Conference, Bridgeport, CT, Apr. 3-4, 2009.
10. Karthikeyan Karuppannan, Xingguo Xiong, Linfeng Zhang, Junling Hu, "Fault Simulation of
Surface-micromachined MEMS Accelerometer", 2009 Northeast ASEE (The American Society for
Engineering Education) Conference, Bridgeport, CT, Apr. 3-4, 2009.
11. Srihari Nannapaneni, Xingguo Xiong, Navarun Gupta, "Design of Wi-Fi MAC Transmit and
Receive Protocol Using Verilog HDL", 2009 Northeast ASEE (The American Society for
Engineering Education) Conference, Bridgeport, CT, Apr. 3-4, 2009.
12. Vignesh Veerapandian, Xingguo Xiong, Lawrence Hmurcik, "Pico Processor Using Verilog HDL",
2009 Northeast ASEE (The American Society for Engineering Education) Conference, Bridgeport,
CT, Apr. 3-4, 2009.
13. Xiaoping Li, Xingguo Xiong, Hassan Bajwa, Prabir Patra, "Implementation of a CMOS Wallace-tree
Multiplier", 2009 Northeast ASEE (The American Society for Engineering Education) Conference,
Bridgeport, CT, Apr. 3-4, 2009.
14. Xingguo Xiong, Tim Dallas, Shubhra Gangopadhyay, Jordan Berg, Temkin Henryk, "Design and
Analysis of a Dual-Mode MEMS Micromirror", submitted to Journal of Micro and Nanosystems,
12/2008, under review.
15. X. Xiong, Y. Wu, and W. Jone, “Control Circuitry for Self-Repairable MEMS Accelerometers”,
Proc. of IEEE International Joint Conferences on Computer, Information, and Systems Sciences,
and Engineering (CISSE'08), Dec. 5-13, 2008.
16. Linfeng Zhang, Xingguo Xiong, Junling Hu, "Odor Source Localization with a Multi-robot System”,
Proc. of IEEE International Conference on Systems, Computing Sciences and Software Engineering
(CISSE) 2008, Dec. 5-13, 2008.
17. X. Xiong, Y. Wu, and W. Jone, “Material Fatigue and Reliability of MEMS Accelerometers”, Proc.
of 23rd IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems (DFT'08),
Cambridge (MA), USA, Oct. 1-3, 2008.
18. K. Sharma, I. Macwan, L. Zhang, L. Hmurcik, X. Xiong, “Design Optimization of MEMS Comb
Accelerometer”, ASEE Zone 1 Conference 2008, United States Military Academy, West Point, NY,
Mar. 28-29, 2008, accepted to be published.
19. X. Xiong, Y. Wu, and W. Jone, “Yield Analysis for Self-Repairable MEMS Devices”, Springer
journal “Analog Integrated Circuits and Signal Processing”, Vol. 56, No. 1-2, pp. 71-81, Aug. 2008.
20. Junling Hu, Linfeng Zhang, Xingguo Xiong, "Teaching Computational Fluid Dynamics (CFD) to
Design Engineers", 2008 ASEE (The American Society for Engineering Education) Annual
Conference & Exposition, Jun. 22-24, 2008, Pittsburgh, PA.
21. X. Xiong, Y. Wu, and W. Jone, “Reliability Model for MEMS Accelerometers”, Proc. of IEEE
International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering
(CISSE'07), Dec. 3-12th, 2007, accepted to be published.
22. Y. Zheng, X. Wang, and X. Xiong, “A Study on Pulsed Power Supply Based on Separate
Excitation”, American Society for Engineering Education's New England Section Conference
(ASEE'07), University of Rhode Island, RI, USA, Apr. 20-21, 2007.
POSTERS
1. Yang Yang, Xingguo Xiong, "Gated Clock Technique for Low Power VLSI Design", 2009
Northeast ASEE (The American Society for Engineering Education) Conference, Bridgeport, CT,
Apr. 3-4, 2009.
2. Vignesh Veerapandian, Xingguo Xiong, "Design of Efficient SOPC-Based Multi-core System Using
NOC", 2009 Northeast ASEE (The American Society for Engineering Education) Conference,
Bridgeport, CT, Apr. 3-4, 2009.
3. Qiubin Zhao, Xingguo Xiong, "Design and Simulation of a MEMS Piston Micromirror", 2009
Northeast ASEE (The American Society for Engineering Education) Conference, Bridgeport, CT,
Apr. 3-4, 2009.
4. Zheng Yao, Xingguo Xiong, "Architecture Level Low Power VLSI Technique", 2009 Northeast
ASEE (The American Society for Engineering Education) Conference, Bridgeport, CT, Apr. 3-4,
2009.
5. Yibo Song, Xingguo Xiong, "A Low Power Content-Addressable Memory Using Pipelined
Hierarchical Search Scheme", 2009 Northeast ASEE (The American Society for Engineering
Education) Conference, Bridgeport, CT, Apr. 3-4, 2009.
6. Chintan Rajyaguru, Ronak Shah, Xingguo Xiong, "Design and Fabrication of a MEMS Torsional
Micromirror", 2009 Northeast ASEE (The American Society for Engineering Education) Conference,
Bridgeport, CT, Apr. 3-4, 2009.
7. Bhushan V. Dharmadhikari, Xingguo Xiong, "Monte Carlo Simulation of Point-Stiction Defects in
MEMS Comb Resonator", 2009 Northeast ASEE (The American Society for Engineering Education)
Conference, Bridgeport, CT, Apr. 3-4, 2009.
8. Bhushan V. Dharmadhikari, Xingguo Xiong, “Point-stiction Fault Simulation of MEMS Comb
Accelerometer”, ASEE Zone 1 Conference 2008, United States Military Academy, West Point, NY,
Mar. 28-29, 2008.
9. Haifeng Dong, Xingguo Xiong, “Design and Fabrication of a Bulk-micromachined MEMS
Accelerometer”, ASEE Zone 1 Conference 2008, United States Military Academy, West Point, NY,
Mar. 28-29, 2008.
10. Xiaoping Li, Xingguo Xiong, “Power Comparison of CMOS and Domino Full-adders”, ASEE Zone
1 Conference 2008, United States Military Academy, West Point, NY, Mar. 28-29, 2008.
11. S.K. Prasad, I.G. Macwan, and X. Xiong, “A 16-bit Low Power Comparator with Logic Shut-down
Techniques”, American Society for Engineering Education's New England Section Conference
(ASEE'07), University of Rhode Island, RI, USA, Apr. 20-21, 2007.
12. J. John and X. Xiong, “Implementation of a 4-bit Encryptor/Decriptor”, American Society for
Engineering Education's New England Section Conference (ASEE'07), University of Rhode Island,
RI, USA, Apr. 20-21, 2007.
PRESENTATIONS
 Xingguo Xiong, “MEMS and Nanotechnology – Think Small and Dream Big”, presentation for
ENGR-400 colloquium in University of Bridgeport, 12/04/2008.
 Xingguo Xiong, “MEMS/NEMS – Small Technology with Big Potentials”, invited seminar in
University of New Haven, CT, 11/24/2008.
NOTABLE STUDENT AND FACULTY ACTIVITIES






Recipient of 2009 Northeast ASEE (American Society of Engineering Education) Outstanding
Teacher Award, Apr. 3, 2009.
Recipient of honorable mentions award for research paper in ASEE'09 conference: Hassan Bajwa,
Prabir Patra, Xingguo Xiong, “Nanotechnology Curriculum Initiative in Connecticut”, 2009
Northeast ASEE Conference, Bridgeport, CT, Apr. 3-4, 2009.
2nd place prize winner in ASEE‟09 student best poster competition: Yang Yang, Xingguo Xiong,
“Gated clock technique for low power VLSI design”, 2009 Northeast ASEE Conference, Bridgeport,
CT, Apr. 3-4, 2009.
Honorable mention award winner in ASEE‟09 student best poster competition: Vignesh
Veerapandian, Xingguo Xiong, “Design of Efficient SOC-Based Multi-Core System Using NOC”,
2009 Northeast ASEE Conference, Bridgeport, CT, Apr. 3-4, 2009.
2nd place prize winner in ASEE‟08 student best poster competition: Bhushan V. Dharmadhikari,
Xingguo Xiong, “Stiction Fault Simulation of MEMS Comb Accelerometer”, ASEE Zone 1
Conference 2008, United States Military Academy, West Point, NY, Mar. 28-29, 2008, accepted to
be published.
3rd place prize winner in ASEE‟08 student best poster competition: Haifeng Dong, Xingguo Xiong,
“Design and Fabrication of a Bulk-micromachined MEMS Accelerometer”, ASEE Zone 1



Conference 2008, United States Military Academy, West Point, NY, Mar. 28-29, 2008, accepted to
be published.
Honorable mentions award in ASEE‟08 student best poster competition: Xiaoping Li, Xingguo
Xiong, “Power Comparison of CMOS and Domino Full-adders”, ASEE Zone 1 Conference 2008,
United States Military Academy, West Point, NY, Mar. 28-29, 2008, accepted to be published.
Honorable mentions award in ASEE‟07 student best poster competition: S.K. Prasad, I.G. Macwan,
and X. Xiong, “A 16-bit Low Power Comparator with Logic Shut-down Techniques”, American
Society for Engineering Education's New England Section Conference (ASEE'07), University of
Rhode Island, RI, USA, Apr. 20-21, 2007.
Honorable mentions award in ASEE‟07 student best poster competition: J. John and X. Xiong,
“Implementation of a 4-bit Encryptor/Decriptor”, American Society for Engineering Education's
New England Section Conference (ASEE'07), University of Rhode Island, RI, USA, Apr. 20-21,
2007.
FACULTY ACTIVITIES



Committee member for developing M.S. program in Sustainable Energy Engineering in University
of Bridgeport (Committee member: Linfeng Zhang, Xingguo Xiong, Junling Hu, Zheng Li, Angela
Satiago), 02/2009. Prepared license application for Master of Science Program in Sustainable Energy
Engineering in University of Bridgeport.
Member of the Professional Yearly Merit Review committee for all faculty in School of Engineering,
07/11/2008. Worked with other committee members to review faculty in School of Engineering for
merit in academic year 2008.
Member of Internal Review Committee (IRC) for reviewing degree programs in University of
Bridgeport: 03/2007 – present. Reviewed degree programs for Math, International Political Economy
& Diplomacy, Music.
PROFESSIONAL SERVICES




Committee member for developing MS program in Sustainable Energy Engineering (SEE), 01/2009present.
Session chair for Electrical and Computer Engineering session in 2009 Northeast Conference,
University of Bridgeport, April 3-4, 2009.
Served as judge in student poster competition of ASEE Zone 1 Conference 2008, United States
Military Academy, West Point, NY, Mar. 28-29, 2008.
Served as judge in student poster competition of American Society for Engineering Education's New
England Section Conference (ASEE'07), University of Rhode Island, RI, USA, Apr. 20-21, 2007.
REVIEWER FOR CONFERENCE/JOURNALS
 The Sixth International Conference on Remote Engineering and Virtual Instrumentation (REV'2009),
Bridgeport, CT, June 22-25, 2009.
 2009 ASEE (The American Society for Engineering Education) Annual Conference & Exposition,
Austin, TX, Jun. 14-17, 2009.
 IEEE International Joint Conferences on Computer, Information, and Systems Sciences, and
Engineering (CISSE'08), Dec. 5-13, 2008
 IEEE Transactions on Industrial Electronics, Feb. 2008 - present.
Linfeng Zhang
Assistant Professor
Electrical Engineering
Journal papers
1. Linfeng Zhang, Erik McCullen, Lajos Rimai, Ratna Naik, Gregory Auner, K. Y. Simon Ng, The
sensing mechanism and the response simulation of the MIS hydrogen sensor, IEEE Sensors Journal,
accepted, 2009
Conference papers
1. Linfeng Zhang, Xingguo Xiong, Junling Hu, Integrating alternative energy technology into
engineering education, ASEE 2009 annual conference and exposition, Austin, TX
2. Xingguo Xiong, Linfeng Zhang, Junling Hu, Lawrence Hmurcik, Introducing the small world –
developing mems/nanotechnology curriculum, ASEE 2009 annual conference and exposition, Austin,
TX
3. Xingguo Xiong, Linfeng Zhang, Lawrence Hmurcik, Self-repairable MEMS comb accelerometer,
ASEE NE, Bridgeport, CT April 3-April 4
4. Linfeng Zhang, Xingguo Xiong, Junling Hu, Developing a new graduate program in sustainable
energy engineering, ASEE NE, Bridgeport, CT April 3-April 4
Book proposal review
1. Circuit Simulation, Farid N. Najm, John Wiley & Sons
Proposals
1. Title: Research and development of hydrogen sensor technologies, Department of Energy,
PI: Linfeng Zhang ($953,753)
Donation
Electron Probe Microanalyzer from National Renewable Energy Lab, original price $660,000
Eman Abdelfattah
Adjunct Professor
Computer Science and Engineering
Eman Abdelfattah “Performance Evaluation of TCP Congestion Control Mechanisms,” International Joint
Conferences on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December
5 - 13, 2008
Eman Abdelfattah, “Mobile Ad-Hoc Routing Protocols: Evaluation of Performance,” American Society of
Engineering Education North East Conference, West Point, April, 2008.
Eman Abdelfattah & Guinshin Liu, “Performance Evaluation of Mobile Ad-Hoc Routing Protocols,”
International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering
(CIS2E 07), December 3 - 12, 2007
Manan Joshi
Adjunct Professor
Electrical Engineer
Conference Publications
1. Manan Joshi, Sarosh Patel and Lawrence Hmurcik, "Improvements in Electrocardiography
Smoothening and Amplification". In the proceedings of the American Society for
Engineering Education (ASEE 08).
2. Sarosh Patel, Manan Joshi and Lawrence Hmurcik, "A Modern but Simple Approach to
Teaching Friction". In the proceedings of the American Society for Engineering Education
(ASEE 08).
3. Manan Joshi, Sarosh Patel and Dr. Lawrence Hmurcik, "EKG De-noising using 1-D
Wavelets Techniques". In the proceedings of the American Society for Engineering
Education (ASEE 09).
4. Sarosh Patel, Manan Joshi and Lawrence Hmurcik, "EKG De-noising using 2-D Wavelet
Techniques". In the proceedings of the American Society for Engineering Education (ASEE
09).
Syed Rizvi
Adjunct Professor
Computer Science and Engineering
PUBLICATIONS:
CONFERENCE PAPERS:
1. Anil Mathew, Nithin Chandrababu, Khaled Elleithy, and Syed S. Rizvi, “IEEE 802.11 & Bluetooth
Interference: Simulation and Coexistence,” 7th Annual Conference on Communication Networks and
Services Research (CNSR2009), Moncton, New Brunswick, Canada, May 11 - 13, 2009.
2. Syed Rizvi, Bevin Thomas, Khaled Elleithy, and Aasia Riasat, “A New Technique of Switch &
Feedback Job Scheduling Mechanism in a Distributed System,“ 2009 Spring Simulation Multiconference
(SpringSim'09), San Diego-Mission Valley; San Diego, CA, USA, March 22 - 27, 2009.
3. Bevin Thomas, Syed S. Rizvi, Khaled M. Elleithy, “Reducing Null Messages Using Grouping and
Status Retrieval for a Conservative Discrete-Event Simulation System,” 2009 Spring Simulation
Multiconference (SpringSim'09), San Diego-Mission Valley; San Diego, CA, USA, March 22 - 27, 2009.
4. Syed S. Rizvi, Hemen Patel, Khaled Elleithy, “Parallel and Distributed Algorithms and Implementations:
Time Based Mutual Exclusion,“ 2009 Spring Simulation Multiconference (SpringSim'09), San DiegoMission Valley; San Diego, CA, USA, March 22 - 27, 2009.
5. Syed S. Rizvi, Khaled Elleithy, and Aasia Riasat, “Analyzing SNR Performance of a Low-Complexity
Wireless Multiuser Receiver for DS-CDMA Systems,” IEEE International Conference on Computer,
Control & Communication (IEEE-IC4 2009), February 17-18, 2009, Karachi, Pakistan, 2009.
6. Syed S. Rizvi, Khaled Elleithy, and Aasia Riasat, “A Low Complexity Optimum Multi-user Receiver for
Maximizing the BER Performance for DS-CDMA Systems,” IEEE International Conference on
Computer, Control & Communication (IEEE-IC4 2009), February 17-18, 2009, Karachi, Pakistan, 2009.
7. Syed S. Rizvi, Aasia Riasat, and Mustafa Khan, “Active Scanning: A Better Approach to Reduce
Handover Time at MAC Layer for Wireless Networks,” IEEE International Conference on Computer,
Control & Communication (IEEE-IC4 2009), February 17-18, 2009, Karachi, Pakistan, 2009.
8. Syed S. Rizvi, Aasia Riasat, and Mustafa Khan, “Deterministic Formulization of Bandwidth Efficiency
for Multicast Systems,” IEEE International Conference on Computer, Control & Communication (IEEEIC4 2009), February 17-18, 2009, Karachi, Pakistan, 2009.
9. Gowrilakshmi Ponuratinam, Bhumika Patel, Syed S. Rizvi, and Khaled M. Elleithy, “Improvement in
the Spread Spectrum System in DSSS, FHSS, AND CDMA,” 2009 ASEE Northeast Section Conference,
University of Bridgeport, Connecticut, April 3-4, 2009.
10. Nilay Patel, Mayuresh Bhalekar, Pandya Nirav, Syed S. Rizvi, Khaled Elleithy, “Reducing Power
Consumption in Sensor Network Using Sensor MAC Protocol,” 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
11. Heven Patel, Hardik Patel, Aditya Jagannath, Syed S. Rizvi, Khaled Elleithy, “A Novel Simulation
Based Methodology for the Congestion Control in ATM Networks,” 2009 ASEE Northeast Section
Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
12. Viktorov Dmitry, Barvaliya Narendrakumar, and Syed S. Rizvi, “Teredo Security Modernization,” 2009
ASEE Northeast Section Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
13. Yinqiu Wang, Wei Wang, and Syed S. Rizvi, “A Cross-Layer Design Approach for Improving QoS of
Wireless Networks,” 2009 ASEE Northeast Section Conference, University of Bridgeport, Connecticut,
April 3-4, 2009.
14. Muhammad Imran, Asif Shaikh, Syed S. Rizvi, Khaled M. Elleithy, “Performance Analysis of Switches
in High Speed LAN,” 2009 ASEE Northeast Section Conference, University of Bridgeport, Connecticut,
April 3-4, 2009.
15. Hemen Patel, Syed S. Rizvi, and Khaled M. Elleithy, “Performance Model for a Conservative
Distributed Simulation Environment using Null Messages to Avoid Deadlock,” 2009 ASEE Northeast
Section Conference, University of Bridgeport, Connecticut, April 3-4, 2009.
16. Allon Rai, Sangita Ale, Syed Rizvi and Aasia Riasat,” A New Methodology for Self
Localization in Wireless Sensor Networks,” 12th IEEE International Multi-topic Conference
(IEEE INMIC 2008), 23-24 December 2008, Bahria University Karachi, Pakistan.
17. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy, “A Mathematical Model for Evaluating
the Performance of Multicast Systems,” IEEE International Workshop on IP Multimedia
Communications (IPMC 2008), St. Thomas, U.S. Virgin Islands, August 4 - 7, 2008.
18. Syed S. Rizvi, Aasia Riasat, Khaled M. Elleithy, and Mustafa Khan, “The Worst and Best Case
Capacity Analysis of Mobile Ad Hoc Networks (MANET) using a 3-Phase Algorithm,” The 5th
Annual IEEE Communications Society Conference on Sensor, Mesh and Ad hoc
Communications and Networks: IEEE SECON 2008, pp. 594 – 596, San Francisco Bay Area,
June 16-20, 2008.
19. Syed S. Rizvi and Aasia Riasat, “Reducing Null Message Traffic in Large Parallel and
Distributed Systems,” 13th IEEE Symposium on Computers and Communications (ISCC'08),
Marrakech, Morocco, pp. 1115 – 1121, July 6 - 9, 2008. Received Best Paper Award.
20. Syed S. Rizvi and Aasia Riasat, “Combining the Synchronous Protocol with the Optimistic
Time Management Algorithm (TMA) to Improve the Latency and the Processor Idle Time,”
The 2008 World Congress in Computer Science, Computer Engineering, and Applied
Computing. WORLDCOMP'08, Las Vegas, Nevada, pp. 290-296, July 14 – 17, 2008.
21. Syed S. Rizvi and Aasia Riasat, “A New Architecture for Minimizing the Transmission
Overhead for Large Parallel and Distributed Networks,” The 2008 World Congress in Computer
Science, Computer Engineering, and Applied Computing, WORLDCOMP'08, Las Vegas,
Nevada, pp. 270-276, July 14 – 17, 2008.
22. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, “An Efficient Single Bit Store and
Forward (SBSF) Routing Algorithm for Mesh-Hypercube (M-H) Networks,” The 2008 World
Congress in Computer Science, Computer Engineering, and Applied Computing,
WORLDCOMP'08. Las Vegas, Nevada. pp. 69 – 75, July 14 – 17, 2008.
23. Jalpa Bani and Syed S. Rizvi, “A New Dynamic Cache Flushing (DCF) Algorithm for
Preventing Cache Timing Attack,” 9th IEEE Wireless Telecommunication Symposium (IEEE
WTS 2008), Pomona, California, pp. 399-404, April 24-26, 2008.
24. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy, “A Closed Form Expression for BER of
Synchronous DS-CDMA Multi-user Detector,” 9th IEEE Wireless Telecommunication
Symposium (IEEE WTS 2008), Pomona, California, pp. 110-114, April 24-26, 2008.
25. Jalpa Bani and Syed S. Rizvi, “A New Dynamic Cache Flushing (DCF) Algorithm to Prevent
Cache Timing Attack,” ASEE Zone I Conference 2008, United States Military Academy, West
Point, NY, March 28 – 29, 2008.
26. Syed S. Rizvi, Aasia Riasat, and Muhammad S. Rashid, “Analytical and Speedup Models for
Performance Evaluation of a Generic Reconfigurable Coprocessor (RC) Architecture,” ASEE
Zone I Conference 2008, United States Military Academy, West Point, NY, March 28 – 29,
2008.
27. Syed S. Rizvi, Aasia Riasat, and Faraz Arain, “Innovative Glass-Box Approach: A Better Way
to Enhance Learning of Complex Dynamic Systems,” ASEE Zone I Conference 2008, United
States Military Academy, West Point, NY, March 28 – 29, 2008.
28. Auf Akhtar, Syed S. Rizvi, and Khaled M. Elleithy, “A Novel Approach of Using Data Guard
for Disaster Recovery & Rolling Upgrades,” ASEE Zone I Conference 2008, United States
Military Academy, West Point, NY, March 28 – 29, 2008.
29. Muhammad S. Rashid, Syed S. Rizvi, and Aasia Riasat, "A New Methodology for Efficient
Traffic Management in ATM Networks for ATM Switching Systems," The 9th INFORMS
Telecommunications Conference: Telecommunications Modeling, Policy, and Technology,
Robert H. Smith School of Business, University of Maryland, College Park, MD, March 27-29,
2008.
30. Muhammad S. Rashid, Syed S. Rizvi, and Aasia Riasat, "A New Methodology for an Efficient
Congestion Control in High Performance Packet Switching Networks," The 9th INFORMS
Telecommunications Conference: Telecommunications Modeling, Policy, and Technology,
Robert H. Smith School of Business, University of Maryland, College Park, MD, March 27-29,
2008.
31. Varsha Edla, Syed S. Rizvi, and Aasia Riasat, "Bit Error Rate (BER) Analysis of Synchronous
DSCDMA Multiuser Receivers," The 9th INFORMS Telecommunications Conference:
Telecommunications Modeling, Policy, and Technology, Robert H. Smith School of Business,
University of Maryland, College Park, MD, March 27-29, 2008.
32. Muhammad S. Rashid, Syed S. Rizvi, and Aasia Riasat, "A New Efficient 3-Phase Algorithm
for Performing Capacity Analysis of Mobile Ad Hoc Networks (MANET)," The 9th INFORMS
Telecommunications Conference: Telecommunications Modeling, Policy, and Technology,
Robert H. Smith School of Business, University of Maryland, College Park, MD, March 27-29,
2008.
33. Ashish Vekaria and Syed S. Rizvi, "A New Efficient Routing Approach for Mobile Ad Hoc
Networks
(MANET),"
The
9th
INFORMS
Telecommunications
Conference:
Telecommunications Modeling, Policy, and Technology, Robert H. Smith School of Business,
University of Maryland, College Park, MD, March 27-29, 2008.
34. Varsha Edla and Syed S. Rizvi, "REPU-TRUST Algorithm: An Efficient way for Minimizing
the Malicious Behavior of Mobile Nodes in Ad Hoc Networks," The 9th INFORMS
Telecommunications Conference: Telecommunications Modeling, Policy, and Technology,
Robert H. Smith School of Business, University of Maryland, College Park, MD, March 27-29,
2008.
35. Varsha Edla, Syed S. Rizvi, and Aasia Riasat, "A New Software Based Approach for
Minimizing Interference in RFID Application," The 9th INFORMS Telecommunications
Conference: Telecommunications Modeling, Policy, and Technology, Robert H. Smith School
of Business, University of Maryland, College Park, MD, March 27-29, 2008.
36. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, “Transformation Matrix System for
Reducing the Computational Complexity of Wireless Multi-user Receivers for DS-CDMA
Systems,” 5th International Conference on Information Technology: New Generations ITNG
2008, pp. 1251-1252, Las Vegas, Nevada, March 27-29, 2008.
37. Syed S. Rizvi, Khaled M. Elleithy, and Aasia Riasat, “A New Mathematical Model for
Optimizing the Performance of Parallel and Discrete Event Simulation Systems,” 11th
Communications and Networking Simulation Symposium (CNS'08) at the 2008 Spring
Simulation Multiconference (SpringSim'08), Ottawa, Ontario, April 14-16, 2008.
38. Syed
S.
Rizvi, Khaled M.
Elleithy, and Aasia Riasat,
“Deterministic
Formalization of the Processing Gain for Reducing MAI in Wireless Multiuser DS-CDMA
Systems,” 5th Annual IEEE Consumer Communications and Networking Conference (IEEE
CCNC'2008), pp. 859-860, Las Vegas, Nevada, January 10 – 12, 2008.
39. Syed S. Rizvi, Saroj Poudyal, Varsha Edla, and Ravi Nepal, “A Novel Approach for Creating
Trust to Reduce Malicious Behavior in Mobile Ad Hoc Networks (MANET),” 3rd International
Conference on emerging Networking Experiments and Technologies (CoNEXT), Columbia
University, New York, NY, December 10 -13, 2007.
BOOK CHAPTERS:
1. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy,” The use of Orthogonal Frequency Code Division
(OFCD) Multiplexing in Wireless Mesh Network (WMN),” Fourth-Generation (4G) Wireless Networks:
Applications and Innovations. A book published by IGI Global (IDEA Group).
2. Abdelrehman Elleithy, Syed S. Rizvi, and Khaled M. Elleithy, “Optimization and Job Scheduling in
Heterogeneous Networks,” International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
3. Abdelrehman Elleithy, Syed S. Rizvi, and Khaled M. Elleithy, “Investigating the Effects of Trees and
Butterfly Barriers on the Performance of Optimistic GVT Algorithm,” International Joint Conferences
on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
4. Syed S. Rizvi, Dipali Shah, and Aasia Riasat, “Implementation of Tree and Butterfly Barriers with
Optimistic Time Management Algorithms for Discrete Event Simulation ,” International Joint
Conferences on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5
- 13, 2008.
5. Allon Rai, Sangita Ale, Syed S. Rizvi, and Aasia Riasat,” A New Power Efficient Algorithm for Self
Localization in Wireless Sensor Networks,” International Joint Conferences on Computer, Information,
and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
6. Syed S. Rizvi, Majid A. Jafri, and Khaled Elleithy, “A Novel Optimization of the Distance Source
Routing (DSR) Protocol for the Mobile Ad Hoc Networks (MANET),” International Joint Conferences
on Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
7. Syed S. Rizvi, Aasia Riasat, and Mustafa A. Khan, “A New Analytical Model for Maximizing the
Capacity and Minimizing the Transmission Delay for MANET,” International Joint Conferences on
Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
8. Syed S. Rizvi, Aasia Riasat, and Adil Sheikh, “Faulty Links Optimization for Hypercube Networks via
Stored and Forward One-Bit Round Robin Routing Algorithm, “International Joint Conferences on
Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
9. Jaiminkumar Gorasia, Syed S. Rizvi, and Aasia Riasat, “Improving the Data Rate in Wireless Mesh
Networks Using Orthogonal Frequency Code Division (OFCD),” International Joint Conferences on
Computer, Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
10. Syed S. Rizvi, Aasia Riasat, and Mustafa A. Khan, “A Novel Encrypted Database Technique to Develop
a Secure Application for an Academic Institution,” International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
11. Syed S. Rizvi, Aasia Riasat, and Adil Sheikh, “A Mathematical Model for Reducing Handover Time at
MAC Layer for Wireless Networks, “International Joint Conferences on Computer, Information, and
Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
12. Syed S. Rizvi, Shalini Poathan, and Aasia Riasat, “A GVT Based Algorithm for Butterfly Barrier in
Parallel and Distributed Systems, “International Joint Conferences on Computer, Information, and
Systems Sciences, and Engineering (CIS2E 08), December 5 - 13, 2008.
13. Syed S. Rizvi, Syed N. Hyder, Aasia Riasat, “Performance Model for a Reconfigurable Coprocessor,”
International Conference on Industrial Electronics, Technology & Automation (IETA 07), Bridgeport,
CT, December 3 - 12, 2007.
14. Aasia Riasat, Syed S. Rizvi, Farheen Zehara, and Faraz Arain, “The Role of System Dynamics in
Learning Environments,” International Conference on Engineering Education, Instructional Technology,
Assessment, and E-learning (EIAE 07), Bridgeport, CT, December 3 - 12, 2007.
15. Syed S. Rizvi, Eslam M. Gebriel, and Aasia Riasat, “RFID: A New Software Based Solution to Avoid
Interference,” International Conference on Systems, Computing Sciences and Software Engineering
(SCSS 07), Bridgeport, CT, December 3 - 12, 2007.
16. Syed S. Rizvi, Saroj Poudyal, Varsha Edla, and Ravi Nepal, “Reducing Malicious Behavior of Mobile
Nodes in Ad Hoc Networks,” International Conference on Telecommunications and Networking (TeNe
07), Bridgeport, CT, December 3 - 12, 2007.
17. Syed S. Rizvi, Aasia Riasat, Muhammad S. Rated, and Khaled M. Elleithy, “An Efficient Scheme for
Traffic Management in ATM Networks,” International Joint Conferences on Computer, Information, and
Systems Sciences, and Engineering (CISSE 07), Bridgeport, CT, December 3 - 12, 2007.
18. Syed S. Rizvi, Khushboo Patel, and Chaitali Patel, “Use of Self-Adaptive Methodology in Wireless
Sensor Networks for Reducing the Energy Consumption”, International Conference on
Telecommunications and Networking (TeNe 07), Bridgeport, CT, December 3 - 12, 2007.
19. Syed S. Rizvi, Aasia Riasat, Muhammad S. Rashid, and Khaled M. Elleithy, “Bandwidth Problem in
High Performance Packet Switching Network,” International Joint Conferences on Computer,
Information, and Systems Sciences, and Engineering (CISSE 07), Bridgeport, CT, December 3 - 12,
2007.
20. Aasia Riasat, Syed S. Rizvi, Faraz Arain, Rizwan M. Qureshi, “Dynamic Semantics of the Web: Useful
Toll for the New Generation Agent-Based Software,” International Conference on Engineering
Education, Instructional Technology, Assessment, and E-learning (EIAE 07), Bridgeport, CT,
December 3 - 12, 2007.
21. Khurram M. Rajput, Khaled M. Elleithy, and Syed S. Rizvi, “A Novel Approach for Creating Consistent
Trust and Cooperation (CTC) among Mobile Nodes of Ad Hoc Network,” International Conference on
Telecommunications and Networking (TeNe 07), Bridgeport, CT, December 3 - 12, 2007.
22. Ajay Shrestha, Khaled M. Elleithy, and Syed S. Rizvi, “Investigating the effects of Encoder Schemes,
WFQ & SAD on VoIP QoS,” International Joint Conferences on Computer, Information, and Systems
Sciences, and Engineering (CISSE 07), Bridgeport, CT, December 3 - 12, 2007.
JOURNAL PAPERS:
1. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. A Low-Complexity Optimum Multiuser Receiver
for DS-CDMA Wireless Systems, submitted to Journal of Communications (JCM).
2. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. Overlay Networks: A Better Approach to Improve
Bandwidth and End-to-End delay Performance, submitted to Special Issue on Delay Tolerant Networks,
Architecture, and Applications, Journal of Communications (JCM).
3. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. Deterministic Formulization of End-to-End Delay
and Bandwidth Efficiency for Multicast Systems, submitted to International journal of Computer
Networks & Communications (IJCNC).
4. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. The Use Of Orthogonal Frequency Code Division
(OFCD) Multiple Access Scheme In Wireless Mesh Network (WMN), submitted to International
journal of Computer Networks & Communications (IJCNC)
5. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. IEEE 802.11 & Bluetooth Interference: Simulation
and Coexistence, submitted to International journal of Computer Networks & Communications (IJCNC).
6. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. An Efficient Single-Bit-Store-Forward (SBSF)
Routing Protocol For Mesh-Hypercube Networks, submitted to International journal of Computer
Networks & Communications (IJCNC).
7. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. Combining Private and Public Key Encryption
Techniques for Providing Extreme Secure Environment for an Academic Institution Application,
submitted to International Journal of Network Security & Its Applications (IJNSA).
8. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. Optimizing the Performance of Null Message
Algorithm in Parallel and Discrete-Event Simulation, submitted to Journal of Simulation (JOS).
9. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. An Efficient Optimistic Time Management
Algorithm for Discrete-Event Simulation System, submitted to International Journal of Simulation
Modelling
10. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. Efficient Routing Algorithm for Mesh-Hypercube
(M-H) Networks, submitted to Journal of Communication and Computer (JCC)
11. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. An Efficient Optimistic Time Management
Algorithm for Discrete-Event Simulation System, submitted to Journal of Communication and Computer
(JCC)
12. Syed S. Rizvi, Aasia Riasat, and Khaled M. Elleithy. New Methodology for Self Localization in
Wireless Sensor Networks, submitted to Journal of Communication and Computer (JCC).
PRESENTATIONS
1. “Combining the Synchronous Protocol with the Optimistic Time Management Algorithm (TMA) to
improve the Latency and the Processor Idle Time,” 2008 World Congress in Computer Science,
Computer Engineering, and Applied Computing. WORLDCOMP'08, Las Vegas, Nevada. July 14 –
17, 2008.
2. “A New Architecture for Minimizing the Transmission Overhead for Large Parallel and Distributed
Networks,” 2008 World Congress in Computer Science, Computer Engineering, and Applied
Computing. WORLDCOMP'08, Las Vegas, Nevada. July 14 – 17, 2008.
3. “An Efficient Single Bit Store and Forward (SBSF) Routing Algorithm for Mesh-Hypercube (M-H)
Networks,” 2008 World Congress in Computer Science, Computer Engineering, and Applied
Computing WORLDCOMP'08, Las Vegas, Nevada. July 14 – 17, 2008.
4. "A Closed Form Expression for BER of Synchronous DS-CDMA Multi-user Detector," 9th IEEE
Wireless Telecommunication Symposium (IEEE WTS 2008), Pomona, California, April 24-26 2008.
5. "A New Dynamic Cache Flushing (DCF) Algorithm for Preventing Cache Timing Attack," 9th IEEE
Wireless Telecommunication Symposium (IEEE WTS 2008), Pomona, California, April 24-26 2008.
6. "Transformation Matrix System for Reducing the Computational Complexity of Wireless Multi-user
Receivers for DS-CDMA Systems," 5th International Conference on Information Technology: New
Generations ITNG 2008, Las Vegas, Nevada, April 7-9, 2008.
7. "Optimizing the Performance of Null Message Algorithm (NMA) for Large Parallel and Distributed
Networks," 9th LCI International Conference on High Performance Clustered Computing, National
Center for Supercomputing Applications. University of Illinois, Urbana, Illinois, USA, April 29-May
1, 2008.
8. "Performance Optimization of Large Parallel and Scalable Distributed Systems Using Trees and
Butterflies Barriers with Optimistic Synchronization Algorithms," 9th LCI International Conference
on High Performance Clustered Computing, National Center for Supercomputing Applications,
University of Illinois, Urbana, Illinois, April 29-May 1, 2008.
9. “QoS of Multiuser Communications,” presented in the WMC Lab, Tech Building, University of
Bridgeport, March 3, 2007.
10. “Optimization of Null Message Algorithm in Large Parallel and Distributed Systems” presented in
the WMC Lab, Tech Building, University of Bridgeport, on April 7, 2007.
AWARDS AND RECOGNITION
1.
UB, Fall-09 Seed Money Grant Awards, Co-PI, $6,860, February 2009.
2.
Received Best Paper Award from 13th IEEE Symposium on Computers and Communications
(ISCC'08), Marrakech, Morocco, July 6 - 9, 2008.