IR WATERPROOF CAMERA

IR WATERPROOF CAMERA
SK-P661(D)/M345AI
MANUAL
9. Please use the camera unit within given temperature and electricity limit.
10. Please make sure that installation should be done by qualified service
person only.
11. Do not disassemble the unit by yourself. When there is problem with
the unit please contact after-sale service center or the shop where
you bought.
4. Attach the sunvisor and fix the sunvisor fixing bolt.
BOLT
SUNVISOR
If the product is to be put out of operation definitively,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
ACCESSORIES
ANCHOR 6x30, 4EA
FEATURE
1. P
lease study the instruction manual before your applications and
keep it for your future reference.
2. Do not flash LED light directly on the eyes when LEDs are on.
3. Do not install the camera on a unstable surface. It will cause falling
or other hazards.
4. Do not use improper power, it could cause fire or electric shock.
(Use the AC adaptor 12V DC regulated, 1.5A)
5. Do not disassemble or re-model the camera, it could cause fire,
electric shock or other hazards.
6. Stop using the camera when you find a malfunction like smoke or
unusual heat, it could cause fire or electric shock.
7. Due to the possibility of water leakage, do not cut or peel off the
cable. In case you cut or peel off the cable, the warranty will be
void.
8. Do not adhere dangerous articles to the camera.
SUNVISOR BOLT, 1EA
Extra video output cable for installation,
1EA(option)
5. Loosen the bolt by using the 3mm wrench included.
6. Face the direction of the camera to monitor.
7. Tighten the bolt to complete adjustment.
BOLT
HOW TO INSTALL
1. Make a hole of Ø25mm in diameter for passing cable.
2. Drill four holes on the wall or ceiling and insert the anchors.
3. Arrange the cables and fix the screws.
WRENCH
WALL
Ø6
ANCHOR 6x30, 4EA
Ø25
DIMENSION
61.
5
101.9
FEATURE
WRENCH 3mm L TYPE, 1EA
61.5
Using 1/3" SONY Super HAD CCDⅡ(WDR 960H), Effio-V DSP
Super Supreme Resolution(700TV-Line)
Advanced WDR, 3D-DNR
Day & Night function(ICR)
Full OSD with Multi-language
Multi function : Sense up, Motion Detection, Privacy Mask, Flip(H/
V/R), E-Zoom
7. This camera is incredibly flexible to install with its 3-axis camera
construction, which makes the camera ceiling, wall or slope
mountable.
8. This product is "waterproof" to resist rain, snow and other weather
factors(IP67)
9. 70M range visible in total darkness with 70pcs of IR LEDs.(Indoor)
10. Extra video connector for easy installation
11. Coaxial communication(Pelco-C) support
12. RS-485 interface(Pelco-D) : option
SCREW 4x35 TP1 PAN SUS, 4EA
1.
2.
3.
4.
5.
6.
SCREW Tp1 4x35, 4EA
86.4
131.3
236
241.1
2. OSD menu structure
SPECIFICATION
Model No.
SK-P661/M345AI
SK-P661D/M345AI
1/3" COLOR SONY SUPER HAD CCDⅡ(WDR 960H)
Image Sensor
Effective Pixel
Cell Size
Scanning System
Sync. Type
Resolution
S/N
Video Output
Min. Illumination
Gamma
OSD
White Balance
Shutter Speed
Sense up
Backlight
AGC
DNR(3D)
Motion Detection
Privacy Zone
Mirror
Day & Night
LED Brightness
Blemish Compensation
DIS
Digital Zoom
Communication(option)
Lens
Power Supply
Current Consumption
Operation Temp.
Preservation Temp.
Dimension
Weight
976(H) x 494(V) Pixel(NTSC), 976(H) x 582(V) Pixel(PAL)
5.0 (H) x 7.4 (V)(NTSC), 5.0 (H) x 6.25 (V)(PAL)
2:1 Interlace
Internal
Internal, external(L/L)
Color : 700 TV-Line, B/W : 800 TV-Line
52dB or More(AGC OFF)
1.0 Vp-p(Sync. Negative) Termination 75Ω
COLOR : 0.15Lux(F/1.2), 0.0005Lux(Sense up)
B/W : 0.05Lux(F/1.2), 0.0002Lux(Sense up)
0Lux(70M Range with 70pcs LED) - Indoor
γ= 0.45 typ.
Yes(Multi Language)
ATW(1,800 ~10,500 )/PUSH/USER1/USER2/ANTI CR/
PUSH LOCK/MANUAL
1/60(1/50) ~ 1/100,000sec
OFF
OFF/WDR/HLC/BLC
6~44.8dB
0~6
ON/OFF Selectable(4 Zone)
ON/OFF Selectable(15 Zone)
OFF/V FLIP/H FLIP/ROTATE
ICR(AUTO, COLOR, B/W)
40pcs, Optimizer IR
YES
ON/OFF
ON/OFF
RS-485(Pelco-D), Coax(Pelco-C)
Vari-focal auto iris lens
Regulated 12V DC ±10% 12V DC/24V AC Dual voltage
Max. 1.2A(at 12V DC, 24V AC) : LED ON
-45℃ ~ 50℃
-50℃ ~ 60℃
86.4(W) x 101.9(H) x 131.3(D)mm
Approx. 1kg
FUNCTION SETTING
1. How to use the jog lever
6
7
F
Z
EXT.VIDEO
8
2
4
①ENTER : Used to access the menu and confirm
selection.
②UP, ③DOWN : Used to move the cursor to up or down.
④LEFT, ⑤RIGHT : Used to move the cursor to left or right
and change the value.
⑥ZOOM, ⑦FOCUS : Use a '+' type driver for adjusting
zoom and focus.(In case of operation Zoom/Focus,
don't put stress excessively.)
⑧EXT. VIDEO : Extra video output terminal for installation.
The cable is option.
5
3
1
*OSD menu & Focus/Zoom adjustment direction
1. Unfasten the screw of the bottom door
2. Adjust the jog lever & Zoom/Focus trimmers
3. Tighten the screw of the bottom door
Main menu
Select menu
Sub menu
Summary
SETUP MENU 1/2
SCENE
CUSTOM, INDOOR, OUTDOOR, BACKLIGHT, ITS
SELECT
BRIGHTNESS 000∼255(128)
CONTRAST
00∼63(32)
PICT ADJUST SHARPNESS 00∼15(08)
HUE
000∼127(064)
COLOR GAIN 000∼255(128)
OFF
EZOOM
ON↲
OFF
DIS
ON↲
PRIVACY
MASK
OFF
MOTION DET
ON↲
Set the screen brightness
Set the screen contrast
Set the screen sharpness
Adjust the hue
Adjust the color gain
Deactivates the E-ZOOM
Selection of Digital zoom
MAG : 000~255(000)
magnification
PAN : 000~1023(512)
Panning the screen
TILT : 000~511(256)
Tilting the screen
Deactivates Digital Image Stabilizer
Activates Digital Image
Stabilizer(You can't use the
E-Zoom function when DIS is on)
ADjust the settings of privacy
15 areas with 8 colors(Enable
mosaic)
Deactivates motion detection
function
Select motion detection zone up to
Detect sense, Detect interval Block DISP,
4 areas (When motion is detected,
MASK area,
message or digital output will be
Monitor area
displayed.)
USER1↲
B-Gain, R-Gain
USER2↲
B-Gain, R-Gain
ADVANCED
MENU(1/2)
PUSH LOCK
3. HLC/BLC
OFF
HLC↲
BLC
4. WDR/ATR-EX
OFF
WDR↲
ATR-EX↲
Type : DC/Video
Mode : Auto/Open/Close
Speed : 000~255(031)
Select Auto Iris lens
MANUAL
Select Manual Iris lens
3.FLIP
SYS SETTING FLIP
OFF/V/H/HV
Activates Image mirror
4.LCD/CRT
CRT
Select CRT Monitor
LCD
Select LCD Monitor
5. COMMUNICATION(Auto Detect Pelco-D protocol)
ADRESS
Address : 001~255
BAUDRATE
2,400~115,200bps
PARITY
OFF/ODD/EVEN
Select PARITY BIT
6.CAMERA ID
OFF
No title displays on the screen
Display the camera's ID on the screen
ON↲
(26 letters & 2 lines)
SETUP MENU 2/2
LANEnglish, Espanol, Pyccknn, Portugues, Deutsch, Francais,
Select language
GUAGE
Japanese
W.PIX MASK↲ AUTO/MANUAL/CLEAR
Blemish Compensation
MAINCAMERA
Restore all the settings to the
TENANCE
RESET↲
default values
SAVE
Save the value and exit menu (The current settings are saved in the flash ROM)
NOT SAVE
Retain the value and exit menu(The current settings are not saved in the flash ROM)
EXIT
CANCEL
Escape the menu without save
BACK
Move back to previous menu
Advanced menu(●:alterable, ×:inalterable)
SCENE
CUSTOM
INDOOR
OUTDOOR
SHUTTER/
●
●
●
AGC
WHITE BAL
●
×
×
HLC/BLC
●
●
●
WDR/ATR-EX
●
×
×
DNR(=3RNR)
●
●
●
DAY/NIGHT
●
●
●
IR OPTIMIZER
●
×
×
LENS SHD
●
●
●
COMP
DEFOG
●
×
×
FLK LESS
●
●
●
ANTI CR
●
●
●
BACKLIGHT
ITS
●
●
×
●
×
●
●
×
×
●
×
●
●
×
●
●
×
●
●
×
●
●
ADVANCED
MENU(2/2)
Summary
Auto exposure setting
Manual exposure setting
FIX exposure setting
Auto trace white balance setting
(1,800°k~ 10,500°k)
Automatically adjust the white balance
under all conditions
The gain values for the outdoor fixed
mode (Adjust the Red or Blue values)
The gain values for the fluorescent light
fixed mode(Adjust the Red or Blue values)
Manual white balance
Move the camera lens toward to white
paper then press the set button to find
the optimal white balance for current
environment
MANUAL↲
2.LENS
AUTO↲
Sub menu
PUSH
Internal Sync with 12V DC power
External Sync with 24V AC power
(You can't use 12V DC. Dual
power only)
(automatically detected)
Select menu
1.SHUTTER/AGC
AE LEVEL : 1∼250
AUTO↲
AGC MAX : 6/12/18/24/30/36/42/44.8DB
SENS UP : AUTO/OFF
Shutter : 256, 128, 64, 32. 16, 8, 4 ,2 FLD,
1/60(1/50), 1/120(1/100), 1/250, 1/500,
MANUAL↲
1/1000, 1/2000, 1/4000, 1/10000
AGC MAX : 6/12/18/24/30/36/42/44.8DB
Shutter : 256, 128, 64, 32. 16, 8, 4 ,2 FLD,
1/60(1/50), 1/120(1/100), 1/250, 1/500,
FIX↲
1/1000, 1/2000, 1/4000, 1/10000
AGC MAX : 6/12/18/24/30/36/42/44.8DB
2.WHITE BAL
Speed : 0∼255(127)
Delay CNT : 0∼255(001)
ATW↲
ATW Frame : 0∼255(125)
Environment : Indoor, Outdoor
Refer to 'ADVANCED MENU'
1.SYNC MODE
INT
L.L↲
Main menu
Deactivated function
High Light Compensation
Back Light Compensation
Deactivates WDR function
Contrast : LOW/MID/HIGH
Clear Face : LOW/MID/HIGH
Contrast : LOW/MID/HIGH
Clear Face : LOW/MID/HIGH
5.DNR(=3DNR)
DNR↲
Level : 0∼6
6.DAY/NIGHT
Burst : OFF/ON
CNTL SIGNAL : INT/EXT1/EXT2
AUTO↲
Delay CNT : 000~255(005)
Day→Night : 000~255(004)
Night→Day : 000~255(016)
DAY
NIGHT↲
Burst : OFF/ON
7.IR OPTIMIZER
ON↲
OFF
1.LENS SHD COMP
OFF
ON↲
2.DEFOG
OFF
ON↲
Level : LOW/MID/HIGH
3.FLK LESS
OFF
AUTO↲
4.ANTI CR
OFF
ON
Wide Dynamic Range
Auto Tone Reproduction(=DWDR)
Set the 3D-Noise Reduction
Day : Color ↔ Night : B/W
(Switching time & speed adjustable)
Fixed at color
Fixed at B/W
Activates IR OPTIMIZER function
Deactivates IR OPTIMIZER function
Deactivates Lens Shade compensation
Activates Lens Shade compensation
Deactivates defog function
Activates defog function
Deactivates Flicker less function
Flicker is automatically detected and
compensated.
Deactivates Anti color rolling function
Activates Anti color rolling function
Color rolling is automatically detected and
compensated.
AUTO
•The ' ↲ ' icon appeared with desired function, press the set button to move sub menu.
•The '- - -' icon appeared with function that is unavailable according to function setting.
3. How to control through RS-485 communication(option)
1) Match the camera with controller's ID, baudrate and protocol
2) Up, Down, Left and right of Jog lever is same as Up, Down, Left and right of RS-485
controller
3) Enter of Jog lever is the same as menu key or IRIS open key of RS-485 controller
4. Cable array(option)
A : ORANGE(RX +)
B : WHITE(RX -)
NO
A
B
Function
RX +
RX -
※All specification is subject to change without notice to improve the quality.
Remark
RS-485A
RS-485B
3B26173A