Measuring devices for volumetric fl ow and fl ow speed GSH 8922

Transmitter
Logger / EASYBus
Display / Controller
Handheld instrument
Measuring devices for volumetric flow
and flow speed
NE
cpl. in case, incl. RS232 interface cable
and software

flow rate

volumetric flow
temperature
Application:
Temperature probe
Alarm / Protection
complete set in case, incl. software


high accuracy
smallest and slow air flows
measurable
slimline telescopic probe
Applications:
Ventilation and air conditioning technology,
meteorology, water sport, air gliding etc.
Specification:
Meas. ranges:
Flow rate:
0,40 m/s to 30,00 m/s
Temperature: -10,0 ... +50,0°C
Resolution:
0,01 m/s resp. 0,1 °C
Accuracy: (at nominal temperature = 25°C)
Flow rate:
±2 % FS
Temperature: ±0,6 °C
Meas. probes: vane probe, 70mm
rotor-Ø and precision-NTC
Meas. interval:
1 meas. / sec.
Display: 2-line LCD display, 37 x 42 mmm
Working temperature: -10 to +50°C
Relative humidity: 0 to +95%r.h.
(non-condensing)
Storage temperature:
-10 to +50° C
Interface: serial interface RS232
Special function: averaging of 8 meas. points,
averaging throughout meas. time, volumetric
flow calculation, hold function, min./max. value
memory
Power supply: 9V-batteries, type IEC 6F22
(included) or via external power supply
Operating time: 100 hours (with alkaline)
Low battery warning: display blinking
Automatic-Off-function: device switches off
automatically after 20 minutes. Permanent mode
possible.
Housing dimensions: :
device: 183 x 76 x 45 mm (W x H x D),
probe: 155 x 75 x 42 mm (W x H x D),
Weight:
approx. 350g (meas. device and probe)
approx. 1.05kg (cpl. in case)
Classic application of the TA 888 is flow measurement in ventilation ducts. Due to its high resolution
of 0.01 m/s even smallest changes of the flow
velocity can be easily and fast detected. The
sensor's small dimensions ensure measurements
yet in thin tubes and confined spaces.
Further applications are function and dirt checks of
filters and exhaust ducts as well as measurements
of room air velocity, e.g. for workspace checks.
Specifications:
Measuring range:
Flow:
0.10 m/s ... 25.00 m/s
Temperature: 0.0 ... +50.0°C
Resolution:
Flow:
0.01 m/s
Temperature: 0.1 °C
Accuracy:
Flow:
(5 % + 0.1 m/s) FS
Temperature: ±1 °C
Display:
LCD display
Meas. interval:
approx. 0.8 s
Working temp.: 0 ... 50 °C
Relative hum.:
0 ... 80 % RH
Dimensions:
- Housing:
210 x 75 x 50 mm (H x W x D)
- Telescopic probe: extendable up to 1150 mm
(incl. handle), Ø 10 mm
- Cable:
2m
Wight:
approx. 275 g (only measuring device)
approx. 1800 g (complete set
in case)
Scope of supply: measuring device, battery,
probe, case, power supply,
USB cable, software
Accessories:
Accessories:
GNG 8901
58
TA 888


W
Thermal anemometer
Volumetric flow anemometer
GVA 0430
power supply
Phonometer
Calibration certificate (10 points)
(without device)
DKD- certificate (10 points)
(without device)
Phonometer
GSH 8922
with analog output, backlight display
cpl. in case
General:
Compensation of the background-noise
for measuring sound-sources in the foreground. Weightig of the sound level via
two weighting-filters according to the IEC
standard. Assignation of the max/min value
during one measuring period.
Specification:
Measuring ranges: 30 - 130 dB (6 ranges)
30 - 80, 40 - 90, 50 - 100,
60 - 110, 70 - 120, 80 - 130 dB
manual or automatic selection of range
Resolution:
0,1 dB
Accuracy:
±1,5 dB
Norms: ANSI S1.4 and IEC 651 Typ 2
Frequency rate weighted: 31,5 Hz - 8 kHz
Evaluation weight filter: 2, selectable
Type A: evaluation of the spectrum in accordance
with the perceptive faculties of the human ear.
(Sound insolation establishment, environmental analysis)
Type C: linear evaluation of spectrum
(sonic-analysis of engines or machines)
Weight of time factor: fast or slow
Microphone: 6mm Electret condensator mic.
Display: 3½-digit LCD-backlight display,
additionally quasi-analog bar graph
Analog output: AC: 0.707 Vrms,
DC: 10mV DC / dB
Working temperature: 4 to +50°C
Relative humidity:
10 to +90 % RH
Storage temperature:
-20 to +60° C
Interface: RS232, (2400BD8N1)
Power supply: 9V-batteries, type IEC 6F22
(included) or via external 9V power supply
Operating time: 20 hours (with alkaline)
Housing: 256 x 80 x 38 mm (H x W x D)
Weight: approx. 240g (meas. device)