TwinProp Specification Sheet

Transcription

TwinProp Specification Sheet
The Subsea Excavation Specialists
TwinProp Specification Sheet
The KDM Marine TwinProp subsea excavation
system is the next generation, state of the art
development of the widely proven Mass Flow
Excavation technique. Counter-rotating propellers
are used to produce two high volume columns of
water which can be adjusted to any angle to best
suit the application. The design and multiple configurations of the KDM TwinProp make it the most
versatile MFE tool in the world.
Applications
The TwinProp is deployed using a crane or A-Frame
and is powered via high pressure hoses. Clump
weights or tugger wires are used to orientate and
stabilize the tool whilst it is operational.
Soils
•
•
•
•
•
•
•
•
•
•
•
•
Pipeline & cable trenching
Decommissioning & salvage
Deburial for IRM works
Rock dump dispersal
Drill cuttings dispersal
Free span rectifications
Seabed clearance & preparation
Sand & gravel
Rock dump
Silt & mud
Clays up to 50kPa (1,044psf) shear strength
Drill cuttings
Data Description
Metric
Imperial
Power at tool
330 kW
440 hp
Maximum thrust
5,000 kg
11,000 lbs
Max flow volume
8,400 l/s
133,100 gpm
Max flow velocity
8 m/s
26 ft/s
Water depths
3m - 300m
10ft - 1000ft
Weights and Dimensions
Length (m)
Width (m)
Height (m)
Weight (kg)
TwinProp Excavator
5.8
2.0
2.3
9,650
Spares Container
6.3
2.4
2.6
8,000
Hydraulic Hose Reel
3.1
2.4
2.6
11,000
Power Pack
6.3
2.4
2.6
14,500
For more information on how KDM Marine International can add value to your offshore operations visit
www.kdmmarine.com or contact [email protected] or call +44 (0) 1651 87 14 54.
KDM Marine International North Meadows, Oldmeldrum, Aberdeenshire, Scotland AB51 0GQ