540-CA13 a new generation of high impact copolymer polypropylene

Transcription

540-CA13 a new generation of high impact copolymer polypropylene
540-CA13
a new generation of high impact copolymer polypropylene
540-CA13
540-CA13 is a high impact copolymer polypropylene
grade recommended for injection moulding of
luggage, crates and boxes as well as for the production of compounds. This new grade offers a unique
set of mechanical properties which were specifically
designed to give very high levels of impact resistance
at low temperatures.
Product properties
Properties
Methods
540-CA13
New
500-NA20
Standard
Units
MFR 230°/2.16kg
ISO 1133
13
20
g/10min
Flex. Modulus
ISO 178
1150
1250
MPa
Tensile Strength @ yield
ISO 527-1,-2
22,5
25
MPa
Notched Izod @ -20°C
ISO 180/1A
9,5
6
kJ/m2
Notched Izod @ -30°C
ISO 180/1A
7,7
5
kJ/m2
Impact Falling Weight @ -20°C
ISO 6603-2
Total Penetration Energy
HDT 0,45 MPa
Vicat softening point (10N)
41
26
J
ISO 75/B
94
95
°C
ISO 306/A50
148
150
°C
For Product Data Sheet and Safety Data Sheet please visit us at www.ineos.com
or contact your INEOS O&P Europe local representative or send an e-mail to [email protected]
© INEOS Olefins & Polymers Europe, October 2014
540-CA13
a new generation of high impact copolymer polypropylene
120
Flexural Modulus (MPa)
100
80
540-CA13
60
IFW @ -30°C (J/mm)
Competition A
40
N.Izod @ 0°C (kJ/m2)
20
0
Competition B
500-NA20
N.Izod @ -30°C (kJ/m2)
N.Izod @ -20°C (kJ/m2)
To satisfy the ever increasing demands of the returnable transport packaging market, the grade
has been especially designed to offer:
· Exceptional levels of impact performance especially at low service temperatures
· Excellent creep resistance coupled with good stiffness to give superior crate stacking stability
· Excellent dimensional stability and low warpage.
· Increased crystallization temperature for potential reductions in mould cooling times
Dimensional Stability
1,4
Shrinkage (%)
1,2
1
0,8
Perpendicular
0,6
Parallel
0,4
0,2
0
540-CA13
Competition A
Competition B
500-NA20
What does 540-CA13 bring on moulded parts?
· High impact strength – particularly at very low temperatures
· Excellent surface finish and antistatic performance
· Stacking stability
· Very good dimensional stability
· Low blushing
· FDA approved
For Product Data Sheet and Safety Data Sheet please visit us at www.ineos.com
or contact your INEOS O&P Europe local representative or send an e-mail to [email protected]
© INEOS Olefins & Polymers Europe, October 2014