High Speed FMC Analog Board for Wireless Communications Overview

Transcription

High Speed FMC Analog Board for Wireless Communications Overview
High Speed FMC Analog Board
for Wireless Communications
Overview
Applications
XX Wireless
communications
infrastructure demonstrator
XX Remote
radio head
XX Software-defined
XX MIMO
XX DPD
radio
diversity receivers
feedback
XX Satellite
XX Test
The AD-FMCOMMS1-EBZ high speed FPGA mezzanine card (FMC) board is designed to
showcase the latest generation high speed data converters. The AD-FMCOMMS1-EBZ
provides the analog front end for a wide range of compute-intensive FPGA-based radio
applications. When combined with an FPGA development platform, the AD-FMCOMMS1-EBZ
enables a variety of wireless communications functions at the physical layer, from
baseband to RF.
modems
and measurement equipment
XX Radar
and advanced imaging
XX General-purpose
data acquisition
AD-FMCOMMS1-EBZ connected to Xilinx
Zynq™-7000 All Programmable SoC.
AD-FMCOMMS1-EBZ board.
Learn more and purchase at
analog.com/DC13-hardware
DAC LVDS
INTERFACE
DDS-1a
DDS-1b
50MHz
VDMA
𝛑
20dB
𝛑
RFOUT
𝛑
RFIN
0dB
CLKOUT AD9523-1
CLOCK
DIST
1GHz
CLKIN
ADF4351
4.5GHz
ADF4351
4.5GHz
SYNCIN
AD8366
AMPLIFIER
600MHz
ADL5380
DEMODULATOR
6GHz
–9dB
FMC LPC
DMA
AD9643 PCORE
INT CNTRL
30MHz
AD9548
CLOCK AND
SYNC GEN
750MHz
AD9643
ADC 14-BIT
14 BITS
250MSPS
@ 250MHz
ADC LVDS
INTERFACE
DMA
INTERFACE
REFERENCE
CLOCK GEN
UART
TIMER
ADL5602
AMPLIFIER
4GHz
0dB
DDR-DDS
VDMA INTERFACE
DDRX
ETHERNET
ADL5375
MODULATOR
6GHz
DDS-2b
AD9122 PCORE
AXI LITE
AXI
MICROBLAZE
DDR
ARM (ZYNQ)
DDS-2a
AD9122
DAC 16-BIT
16 BITS 1250MSPS
@ 500MHz
I2C SPI
I2C
ML605/KC705/VC707/ZC702/ZED
AD-FMCOMMS1-EBZ
Software defined radio block diagram.
Features
AES-ZSDR-ADI-G kit includes:
• Avnet ZedBoard 7020 baseboard
• Xilinx ISE® WebPACK software
with a device locked ChipScope
license (device locked to
XC7Z020)
• Analog Devices FMC board
AD-FMCOMMS1-EBZ
Benefits
• Kit commercially available from Avnet
• Linux drivers, applications
software, HDL source, reference
designs, full schematics, and
Gerbers
• Two pulse LTE blade antennas
(2500 MHz to 2700 MHz)
• 8 GB SD card
• Fan assembly, antenna, screws,
and standoffs
• Proven, tested SDR system example reduces risk for developers of high
performance FPGA/analog/RF SDR
AD-FMCOMMS1-EBZ FMC board
Can be purchased separately and is available from ADI and all ADI
authorized distributors
Software-tunable across wide bandwidth
• Customizable to any frequency with no hardware changes
• 400 MHz to 4 GHz design
• Wide bandwidth
• 200 MHz bandwidth
• Allows high channel density
Phase/frequency synchronization on Tx and Rx
Supports MIMO radio
Bypass RF section for baseband sampling
Allows for general-purpose platform configuration and testing
Low power
Powered from single FMC connector
Design Resources
XX Design Files and Software
•
Linux drivers
•
Applications software
•
HDL source
•
Reference designs
Visit wiki.analog.com to access the files.
©2013 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the
property of their respective owners.
Printed in the U.S.A.
PH11499-.75-4/13
XX Support Community
Ask your technical questions
in the FPGA Reference Designs
Community at ez.analog.com.
Learn more and purchase at
analog.com/DC13-hardware
Tweet it out! @ADI_News #ADIDC13