2014 SEM Fall Conference and International Symposium on Intensive loading and Its Effects

Transcription

2014 SEM Fall Conference and International Symposium on Intensive loading and Its Effects
2014 SEM Fall Conference
and
International Symposium
on Intensive loading and Its Effects
Program
October 19-22, 2014, Beijing, China
October 19, 2014—Lobby of Friendship Palace (友谊宫), Friendship Hotel
08:00-17:00
18:00-19:30
On-site Registration (payments by cash or credit card)
Dinner
October 20, 2014—Lobby of Friendship Palace (友谊宫), Friendship Hotel
08:00-12:00
On-site Registration (payments by cash or credit card )
October 20, 2014—2nd Floor, No. 1 Building/Guibin Lou, Friendship Hotel
Time
Meeting Hall A
Chair:
08:00-08:30
Opening Ceremony
08:30-09:00
Plenary speaker
09:00-09:30
Plenary speaker
09:30-10:00
Plenary speaker
Prof. Fenglei Huang
Chair: Prof. G.I. Kanel and
What Optical Metrology can do for the Inspection of Micro and nano Components? |Prof. Wolfgang Osten– (Universität Stuttgart, Germany)
Material dynamic experiments under ramp wave loading |Prof. Chengwei Sun–(China Academy of Engineering Physics)
Displacement-relay videometric methods for surface multi-position subsidence surveillance | Prof. Qifeng Yu–(National University of Defense Technology, China)
10:00-10:20
COFFEE BREAK
Chair: Prof. Wolfgang Osten and
10:20-10:50
Plenary speaker
10:50-11:20
Plenary speaker
11:20-11:50
Plenary speaker
11:50-12:20
Plenary speaker
12:20-13:30
Prof. Yilan Kang
Prof. Qingyuan Wang
Strain rate effect on dynamic impact and energy absorption of two dimensional lattice materials | Prof. Daining Fang–(Peking University, China)
Mechanics in combined extreme environments: recent experimental studies | Prof. Arun Shukla–(University of Rhode Island, USA)
Normal and oblique projectile impact of double-layered pyramidal metallic lattices filled with ceramic insertions | Prof. Tianjian Lu–(Xi'an Jiaotong University, China)
A residual stress measurement method for glass plates by integrating photoelasticity and spectrometer
Prof. WeiChung Wang–(National Tsing Hua University, Taiwan, China)
LUNCH
Chair:
13:30-14:00
Plenary speaker
14:30-15:00
Plenary speaker
15:00-15:30
Plenary speaker
Fully non-contact systems for damage visualization and diagnosis in composite structures | Prof. Fuh-Gwo Yuan–( North Carolina State University, USA)
A study on very high cycle fatigue properties of low flammability magnesium alloy in rotating bending and axial loading
Prof. Tatsuo Sakai, Shoichi Kikuchi, Yuki Nakamura, and Noriyuki Ninomiya–( Ritsumeikan University, Japan)
Stokes-Mueller analysis to optical coherence tomography for possible stress analysis in biotissues and cancer cell diagnosis
Prof. Yu-Lung Lo–(National Cheng Kung University, Taiwan, China)
15:30-15:50
COFFEE BREAK
Chair:
Prof. Xiaoyuan He
Rate, structure and temperature effects on the flow stress and tensile strength of metals
Prof. G.I. Kanel–(Joint Institute for High Temperatures of Russian Academy of Sciences, Russia)
Plenary speaker
16:50-17:20
Plenary speaker
17:20-17:50
Plenary speaker
17:50-18:20
Plenary speaker
20:30-22:00
Prof. Vikas Prakash and
Plenary speaker
16:20-16:50
18:40-20:30
Prof. Weichung Wang
Contribution of multiscale experimental and computational mechanics to the integration of advanced nanomaterials in mechanical systems
Prof. Jian LU–(City University of Hong Kong,Hong Kong, China)
14:00-14:30
15:50-16:20
Prof. Tatsuo Sakai and
Plenary speaker
Friction behavior of fault gouges at co-seismic slip rates and normal pressures using modified torsional Kolsky bar
Prof. Vikas Prakash–(Case Western Reserve University, USA)
Application of the continuous rotating detonation to gas turbine, jet and rocket propulsion
Prof. Piotr Wolański–(Warsaw University of Technology and Institute of Aviation, Poland)
Real-time damage assessment inside materials deforming at different rates | Prof. Weinong Chen–(Purdue University, USA)
Experimental studies on dynamic deformation and fracture of materials and structures by using digital image correlation
Prof. Pengwan Chen, Jingjing Chen, Han Liu, BaoqiaoGuo, Haibo Liu, Bo Wang, Kaida Dai–(Beijing Institute of Technology, China)
CONFERENCE BANQUET, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE
Poster exhibition(Lobby of No. 8 Building/Jiabin Lou 嘉宾楼)
October 21,2014— Fatigue and Damage
Mini-Symposium Organized by Prof. Qingyuan Wang
Time
Meeting Hall 1 , No. 8 Building/Jiabin Lou (嘉宾楼),Friendship Hotel
Chair:
08:00-08:25
Invited Speaker
08:25-08:50
Invited Speaker
State-of-the-art and perspectives: ultrasonic nanocrystalline surface modification (UNSM) technique towards improving mechanical characteristics and performances of
materials | Prof. Young-SikPyun, Prof. Auezhan Amanov–( Sun Moon University, South Korea)
Invited Speaker
09:15-09:40
Invited Speaker
Micro heterogeneous behavior in metallic materials during deformation and fatigue | Prof. Guocai Chai– (Linköping University, Sweden)
Growth mechanism of a fatigue crack of age-hardened Al alloy in high humidity
Prof. N. Kawagoishi, K. Kariya, QY. Wang , Q. Chen and XS. Wang–(Dai-ichi Institute of Technology, Japan)
Invited Speaker
The effect of hybrid surface treatments of ultrasonic nanocrystal surface modification and plasma nitriding on the fatigue strength of super long-life region for S45C steel
Prof. Ri-ichi Murakami–(National Taiwan University of Science and Technology, Taiwan, China)
10:05-10:20
COFFEE BREAK
Chair:
10:20-10:45
Invited Speaker
10:45-11:10
Invited Speaker
11:10-11:35
Invited Speaker
11:35-12:00
Invited Speaker
12:00-13:30
Prof. Qingyuan Wang
Self-heating of materials during mechanical solicitations: a mean to understand the damage mechanism | Prof. D. Wagner– (University Paris ouest, France).
08:50-09:15
09:40-10:05
Prof. Tatsuo Sakai and
Prof. Guocai Chai and
Prof. Qiang Chen
Characterization of parylene C thin films under tensile loading | Prof. Qiang Chen, Jeffrey Chun-Hui Lin and Yu-Chong Tai– (Kumamoto University, Japan)
Super long life fatigue behavior of TC17 alloy at room and elevated temperatures | Prof. Qing-yuan Wang– (Sichuan University, China)
Transition from VHCF to HCF, subsurface “FGA” forming and metals cracking in VHCF regime | Prof. Andrey Shanyavskiy– (State Centre for Flights Safety, Russia)
Infrared non-destructive technique for high frequency fatigue
Prof. Chong Wang, Claude Bathias, Nicolas Ranc (Sichuan University, China; University of Paris oust/LEME, France)
LUNCH, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE(友谊宫一层餐厅).
Experimental method and application in extreme environment
Mini-Symposium Organized by Prof. Xue Feng
13:30-13:55
Chair:
Prof. Xue Feng and
Prof. Tao Suo
Invited Speaker
Digital gradient sensing method for refractive index non-uniformity measurement at elevated temperature
Prof. Xue Feng, Changxing Zhang, Zhe Qu and Keh-Chih Hwang– (Tsinghua university, China)
13:55-14:10
14:10-14:25
14:25-14:40
14:40-14:55
14:55-15:10
15:10-15:25
15:25--15:40
15:40-15:55
15:55-16:10
16:10-16:20
16:20-16:35
16:35-16:50
16:50-17:05
17:05-17:20
Residual stress analysis in ε-Si multilayer film structure by micro-raman spectroscopy | W. Qiu, Y.C. Zhao, C.L. Cheng and Y.L. Kang
Multi-fields characteristics of high temperature superconductors | Xingyi Zhang, Jun Zhou, Youhe Zhou
Critically appraising on hopkinson bar calibrating techniques for high-g accelerometers | Y.G. Miao, T. Suo, Y. L. Li, Q. Deng, H. T. Hu, and F. Zhao
Analysis on the accuracy of detecting surface cracks by active infrared thermography | Zhi Qu, Feng Wang, ZhichaoLv, Xueling Fan, Weixu Zhang, Tie Jun Wang
A new method for measuring the adiabatic temperature rise effect of Cu under impact loading with SHPB | Kai Yan, Tao Suo and Chao Hang
Experimental study on cellular deformation of fruits and vegetables during cryopreservation | HongweiJia, Xue Feng, Huaiwen Wang
Experimental study on the behavior of a membrane of dielectric elastomer under electromechanical coupling loading
Sibo Cheng, Tongqing Lu, Tiejun Wang, and ZhigangSuo
Influence of processing parameters on the accuracy of DIC in a complex environment | Wenzhen Jia, Wang Xian, Shaopeng Ma
Large scale structure deformation measurement method based on CCD moiré | Yang Xiang, Jianlong Wang, Zhipei Wu, Youqi Zhang, Qinwei Ma and Shaopeng Ma
COFFEE BREAK
Chair: Prof. Shaopeng Ma and Prof. Xingyi Zhang
Response of foam filled concrete cubes subjected to impact loading | Zejia Liu, Yiping Liu, Zhenyu Jiang, and Liqun Tang
Crack path and propagation in brittle ceramics subjected to thermal shock | Yanwei Wang, Helong Yu and Hongxiang Tang,XueFeng
Experiments and viscoelastic analysis of peel test with patterned strips | Hang Chen, Xue Feng , Yin Huang, Yonggang Huang
D-001
Three-sheet spot welds of 5052 aluminum alloy: weld growth and failure behavior | Fuyu Yan, Zhen Luo , Yuh J. Chao, Yang Li, SansanAo, Xuetuan Cui
17:20-17:35
E-001
17:35-17:50
J-004
17:50-18:05
H-023
18:20-19:30
Critical dimensions of tensile-shear specimen for resistance spot welds | Xuetuan Cui, Zhen Luo , Yuh J Chao, SansanAo, Fuyu Yan
Material defect detection method based on strain field statistics | Erqiang Zhao, Qinwei Ma , Shaopeng Ma
The moiré interferometry technique and its application to measure the mechanical behavior under high temperature
Xianglu Dai, Huaixi Wang, Huimin Xie, Baoge Zhang, Fulong Dai
DINNER, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE(友谊宫一层餐厅).
October 21, 2014—International Symposium on Intensive loading and Its Effects
Time
Meeting Hall 5, No. 8 Building/Jiabin Lou (嘉宾楼),Friendship Hotel
Chair: Prof. Cheng Wang
Chair:Prof. Min Zhou and
08:00-08:25
Invited Speaker
08:25-08:50
Invited speaker
08:50-09:15
Invited speaker
09:15-09:40
Invited speaker
09:40-10:05
Invited Speaker
Prof. Brian Uy
Time-dependent phenomena at shock compression of condensed matter
Prof. G. I. Kanel, E. B. Zaretsky , S. I. Ashitkov , and S. V. Razorenov–(Joint Institute for High Temperatures of Russian Academy of Sciences, Moscow, Russia)
Simplified numerical method for analysing blast induced structural response | Prof. Hong Hao, Jun Li–(Curtin University, Australia)
Impact and blast loading of steel and concrete filled steel members: experiments, theory and analysis | Prof. Brian Uy–(The University of New South Wales, Sydney, Australia)
The effects of core compressibility on the response of sandwich composites subjected to underwater impulsive loads | Prof. M. Zhou–(Georgia Institute of Technology, USA)
Dynamic strain hardening in graphene oxide paper | Prof. Zhong Zhang–(The National Center for Nanoscience and Technology of China)
10:05-10:20
COFFEE BREAK
Chair:
Prof. Hong Hao and
Prof. Yulong Li
10:20-10:45
Invited speaker
10:45-11:10
Invited speaker
11:10-11:35
Invited Speaker
Interferometric dynamic measurements using high-speed camera or photodetector | Prof. Y. Fu, M. Guo, H. Liu, K. Yan, Y. J. Xu–(Nanyang Technological University, Singapore)
11:35-12:00
Invited speaker
Recent studies on graded celluar materials under impact | Prof. Guoxing Lu–(Nanyang Technological University, Singapore)
Mechanical behavior of a 0/90 C fiber woven composite at high strain rates | Prof. Yulong Li, Xuan Chen, YazhouGu–(Northwestern Polytechnical University, China)
Experimental investigation on dynamic Saint-Venant's principle in a cylindrical waveguide | Prof. Guowei Ma–(University of Western Australia)
12:00-13:30
LUNCH, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE(友谊宫一层餐厅).
Chair:
13:30-13:55
Prof. Guoxing Lu
and
Prof. Guowei Ma
Invited Speaker
The in-situ measurement of the penetration trajectory in reinforced concrete target by grid measurement method
Dr. Xiaowei Chen– (China Academy of Engineering Physics, China)
13:55-14:20
Invited speaker
Initiation chemistry of PBXs role of shear strain and radiation heating at SDT and self-adjusted detonation disclosing a dominating role of shock-induced shear strain in
initiation chemistry of PBX-materials from micro- and meso-scale probing of reaction spot formation
Prof. Igor Plaksin– (University of Coimbra, Portugal)
14:20-14:45
Invited speaker
14:45-15:00
E-006
15:00-15:15
B-018
15:15-15:30
B-020
15:30-15:45
A-001
15:45-16:00
H-007
The use of cylindrical bars as blast barriers: an numerical insight | Jean Eudes Niollet, Steeve Chung Kim Yuen, Gerald. N. Nurick, Gregory Girault
-(University of Cape Town, South Africa)
Modification of fiber-metal laminates for enhanced impact resistance | Jinglei Yang, He Zhang, Pengfei Wang, Xin Zhang
Dynamic tensile failure of rocks subjected to pre-tension stress | Rong Chen, Bangbiao Wu, Kaiwen Xia
An experimental method for single rock particle crushing | Sheng Huang, Kaiwen Xia
Modification of loading stress wave by pulse shaper technique on magnetically driven isentropic experiments
Binqiang Luo, Guiji Wang, Fuli Tan, Jianheng Zhao, Chengwei Sun
The button head bullet effects on the incident pulse of Split Hopkinson Press Bar | Qu Jia,Chen Geng ,Huang Chao
16:00-16:30
COFFEE BREAK
Chair:
16:30-16:45
G-005
16:45-17:00
C-002
17:00-17:15
B-023
17:15-17:30
E-004
17:30-17:45
E-005
18:20-19:30
Prof. Igor Plaksin and
Prof. Pengwan Chen
Research on predicting the mechanical properties of synthetic fiber under different loading rates based on heat effect mechanism
Jinqi Wang, Linan Li, Gaili Zhou, Shibin Wang, Zhiyong Wang , Zhenming Lei
The ballistic performance of mluti-layer Kevlar fabrics impregnated with shear thickening fluids | Yan Wang, Shukui Li, Xinya Feng
Correlated study of τ—γ relations, shear localization and microstructural evolution on aluminum alloy 2024 and Ti6Al4V alloy
Rong Yang, Husheng Zhang, Letian Shen, Yongbo Xu, Yilong Bai and Bradley Dodd
Ballistic response of thin aluminum target with varying circumference fixity | M.A.Iqbal, G.Tiwari, P.K.Gupta
Design and evaluation of impact energy absorber in nuclear reactor
Zhe Yang, He Yan,Chenguang Huang, Xingzhong Diao, Xianqian Wu, ShaohuaWang, Lingling Lu, Lijuan Liao, Yanpeng Wei
DINNER, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE(友谊宫一层餐厅).
October 21,2014
Time
Technical Program One
Meeting Hall 2, No. 8 Building/Jiabin Lou
Technical Program Two
Meeting Hall 3, No. 8 Building /Jiabin Lou
Chair: Prof. Yoshiharu Morimoto and Prof. SaotshiKishimoto
Chair: Prof. Jinsong Leng and Prof. Jinlong Chen
08:00-08:25
Invited Speaker
Invited Speaker
The moiré techniques on experimental mechanics
Prof. Yoshiharu Morimoto, Akihiro Masaya, Akifumi Takagi and Motoharu
Fujigaki–(Wakayama University, Japan)
Shape memory polymer and its composites:recent progress and future applications
Prof. Jinsong Leng– (Harbin Institute of Technology, China)
08:25-08:50
Invited Speaker
Invited Speaker
Development of several moiré methodsfor large structures digital camera
Prof. Satoshi Kishimoto– (National Institute for Materials Science, Japan)
Thermo-mechanical reliability assessment of thin electronic packages with high
density interconnects using moiré methods
Prof. Jae-Won Jang and Soon-Bok Lee– (Korea Advanced Institute of Science and
Technology, Republic of Korea)
08:50 -09:15
Invited Speaker
F-021
Windowed fourier fringe analysis in experimental mechanics
Prof. Kemao Qian–(Nanyang Technological University, Singapore)
Identification and optimization of specific energy during shield tunneling using an
inverse method based on massive on-site data
Qian Zhang, Yilan Kang, Zheng Zheng
09:15 -09:30
J-001
E-003
Development of a portable in situ three-dimensional deformation measurement
instrument
Mohammed Mokhtar Eisa, Xiaoyuan He
Study on durability experimental methods of RC members strengthened with FRP in
hot-wet environments
Hao Zhou, Peiyan Huang,Guang Qin, Demin Wei
09:30 -09:45
J-007
F-008
Characteristics of the wrap around fin rocket configurations with different geometry
parameters
G.Q. Zhang, J. SCHLÜTER
Experimental study on damage evolution and strain localization in rock using digital
image correlation
Haipeng Song, Hao Zhang, Donghui Fu, Yilan Kang
09:45-10:00
H-013
G-006
Optical full-field strain measurement of metallic materials by sampling moire
method under tensile testing
Shien Ri, Tomio Nakajima, Isamu Iida, Naoki Yamamoto and Hiroshi Tsuda
Interlayer motion of graphite flakes and its ultralow sliding friction
Xide Li, Wen Wang, Quanshui Zheng
I-002
In-situ TEM study on nano-compositing anodes for lithium ion battery application
Hongtao Wang, Qianqian Li
10:00 -10:20
COFFEE BREAK
Chair:
Prof. Soon-Bok Lee and
Prof. Xuefeng Yao
Chair:
Prof. Xide Li and
Prof. Shibin Wang
10:20-10:35
H-002
I-001
Study of crack tip function influences of extended digital image correlation method
Jixiao Wang, Jinlong Chen
Experimental and finite element study of electro migration induced damage and
fracture of solder
Fei Su, Yuan Wang, Weijia Li and Zheng Zhang
10:35-10:50
H-004
F-013
Design and application of digital multi-spark high-speed camera system
Yao Xue Feng, Liu Wei
Numerical model building and optimization of concrete based on the CT images and
digital volume correlation
Yongliang Liu , Qianwen Sun , Lingtao Mao
H-003
B-019
In-situ observation and measurement of composites subjected to extremely high
temperature
Xufei Fang, Helong Yu, Guobing Zhang, Hengqiang Su, Hongxiang Tang and Xue Feng
Thermal degradation of Mortar manifested by dynamic mechanical properties
Yao Wei, Feng Dai, Kaiwen Xia
11:05-11:20
H-009
F-007
Stretchable sensor networks for intelligent structures design
Zhiqiang Guo, Fu-Kuo Chang
Analyzing stress wave propagation in a hollow bar three-point bend specimen setup
using numerical methods
Raja Ahsan Javed, Shifan Zhu, ChunhuanGuo, Fengchun Jiang
11:20-11:35
H-011
J-005
Generic error compensation for 3D shape measurement in digital fringe projection
profilometry
Chen Xiong, Jun Yao, Jubing Chen, Hong Miao
New experimental method to trace the route of damage evolution in ductile
spallation
Xiaoyang Pei, Hongliang He, Ping Li, Hui Peng, Youjun Zhang
11:35-11:50
H-010
F-001
Mapping a two-dimensional distorted plane into an ideally flat plane –a universal
distortion correction method for camera calibration
Zhenxing Hu, Huimin Xie, Hongbing Lu,Jianxin Gao
Experimental study and numerical simulation of the tensile test for GH4169 coated
with YSZ coating at high temperature
Linlin Wang , Qunbo Fan , Guoju Li , Hongmei Zhang
D-004
J-006
Research of the anti-penetration mechanism for titanium alloys armor based on 3D
optical scanning technology
Yumeng Xia, Qunbo Fan , Ruihua Gao, LiruiHuo , Yipeng Zhang
Electromechanical admittance response of a coupled piezoelectric wafer and
laminated composite beam system
Baiqiang Xu, Luo Ying, GuidongXu,Chenguang Xu, QujiYue
10:50-11:05
11:50-12:05
12:00-13:30
LUNCH, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE (友谊宫一层餐厅).
Chair:
Prof. Fei Su and
Zhanwei Liu
Chair:
Prof. Yuh J. Chao and
Prof. Linan Li
13:30-13:45
F-020
B-012
Fabrication of multi-scale grid patterns as deformation carriers in optical methods
Q.H. Wang, S. Ri, H. Tsuda, S. Kishimoto, Y. Tanaka, Y. Kagawa
Dynamic behavior of ice at high strain rates and cryogenic temperatures
Xianqian Wu, Vikas Prakash, Chenguang Huang
13:45-14:00
H-006
F-009
Development of strain gradient sensor based on flexoelectric effect
Ying Luo, Xingjia Li, Chenguang Xu
The response of sub-sea pipeline on anchoring operation
Mengmeng Zhang, Iinan Ii, Zhiming Guo, Zhiyong Wang and Zhenming Iei, Guomin Sun
14:00-14:15
H-012
K-001
Some practical considerations in element-based digital image correlation method
Bing Pan, Bo Wang
Evaluation of structural damping using different OMA techniques
Anela Bajrić, Christos T. Georgakis, Rune Brincker
14:15-14:30
H-016
B-016
Comparative error assessment of digital image correlation algoritms
L Wang, B Pan, W Tong
The critical peak pressure to induce martensitic transformation of NiTi shape memory
alloy in laser shock peening
Weiguang Xi, Xi Wang, Yanpeng Wei, Chenguang Huang
14:30-14:45
B-002
B-003
Full-field measurement of deformation and rupture of thin flat cover under confined
blast loading by using 3D DIC
Han Liu, Pengwan Chen, BaoqiaoGuo , Haibo Liu and Jingjing Chen
Dynamic deformation response of G33 steel under high temperature
Youjing Zhang, Hongnian Cai, Xingwang Cheng, Shuangzan Zhao
14:45-15:00
H-020
B-010
Simultaneous measurement of in-plane and out-of-plane deformation using
dual-beam spatial-carrier digital speckle pattern interferometry
Kai Liu, Sijin Wu and Lianxiang Yang
Study on preparation and mechanical properties of W-Cu alloy with low W-W
contiguity
Zhiyu Hu, jinxu Liu, Shukui Li, Xingwang Chen, Fuchi Wang
15:00-15:15
B-004
G-009
The dynamic behavior of high speed train using magnetorheological technology on
the curve track
Huaxia Deng, Laijun Zhou, Shiyu Zhao, Weihua Li, Shuaishuai Sun and Jin Zhang
Investigation of the large scale borehole soundless cracking experiment on the
concrete members
Quan-jun Xu, Nan Jiang, Yu Liao, Tao Yang, Ran Ji, Di Liu
15:15-15:30
K-006
D-007
3D SEM moiré method | Hui-Hui Wen, Zhan-Wei Liu, Chuan-Wei Li,HuiminXie
Research on the dynamic mechanical experiments of aeronautic rivets
P Yang, Y Z Guo, Y L Li
15:30-15:45
K-009
B-013
Interior 3D-strain mapping in opaque materials using digital volumetric speckle
photography and X-ray micro computer tomography
Lingtao Mao, Fu-Pen Chiang
Phase transition of titanium under magnetically driven quasi-isentropic compression
Tao Chong, FuLi Tan, GuiJi Wang, JianHeng Zhao
K-007
F-022
Micro rotation measurement based on CCD moiré method
Junfei Li , Yang Xiang, Zhipei Wu ,Youqi Zhang , Jianglong Wang , Qinwei Ma, Shaopeng
Ma
Modified quartet structure generation set reconstruction of finite element model for
co-continuous ceramic composites
Qingxiang Wang, Hongmei Zhang, HongnianCai and Qunbo Fan
15:45-16:00
16:00-16:20
COFFEE BREAK
Chair:
16:20-16:35
Prof. Shien Ri and
Prof. Lingtao Mao
Chair:
Prof. Jianheng Zhao
and
Prof. Bing Pan
J-002
B-031
A scanning thermographic method for cracks defect detection of thermal barrier
coatings
Wenxiong Shi, Zhanwei Liu, HuiminXie
Application of manganin pressure sensor in underwater explosive shock wave
measurement at near-field
Yu Hu,Renrong Long, Qingming Zhang,Zhengping Huang,ZhuopingDuan
16:35-16:50
K-008
B-011
3D deformation and strain analysis in uniaxial compressived coal using digital
volumetric speckle photography
XiuyunLian , Lingtao Mao
Effects of silica nanoparticle addition on dynamic properties of poly(lactic acid)
Masahiro Nishida, Yuma Takeuchi, RieNatsume, Norio Fukuda, Hiroaki Ito
16:50-17:05
H-029
B-032
Experimental measurement of residual stress on thermal spray coatings with moire
interferometry and hole-drilling method
Jianguo Zhu and Huimin Xie
The process analysis of flash produced in hypervelocity impact LY12 aluminum target
Kai Zhang, Renrong Long, Qingming Zhang, ZuopingDuan
17:05-17:20
K-004
K-013
Color CCD micro-moiré method
Hongye Zhang, Chenlong Wu, Zhanwei Liu, HuiminXie
Refraction index measurement of transparent material by digital image correlation
method
Ha Yu i, Rongxin Guo, Haiting Xia
F-011
F-014
17:20-17:35
17:35-17:50
Non-intervisible pose estimation based on planar mirror
Jinbo Liu, Gucan Long, Xin Li
Scaled-numerical models of earthquake resistant reinforced concrete buildings
Jhuma Debnath, Nitresh Ahir, Kunjari Mog
K-010
F-015
Adaptive BM3D image denoising with region-based classification
Xichao Teng, Zhihui Lei, Zhiqiang Xu
18:20-19:30
Model updating of model of reinforced concrete column
KunjariMog, Nitresh Ahir, Jhuma Debnath
DINNER
October 22,2014
08:30-17:00
18:00-19:30
BIT, Lab technical investigation
DINNER, THE DINING ROOM, 1ST FLOOR, FRIENDSHIP PALACE(友谊宫一层餐厅).
Note:Lunch, Dinner and Conference Banquet are in the Dining room, 1st floor, Friendship Palace(友谊宫一层餐厅).

Similar documents