L01 Specification Sheet 1W IN-GRADE

Transcription

L01 Specification Sheet 1W IN-GRADE
Specification Sheet
L01
1W IN-GRADE
Application:
Exterior/interior directional in-grade light for uplighting
walls, columns, or architectural features.
Electrical:
1W, 350mALED.
LED Input Voltage: 4V DC or 12V AC
Power Consumption: 1.5W
Power Supply:
DC - Powered by remote 350mA DC driver.
Recommended LED10W350D. Dimmable drivers
available (not included).
Ø4-1/8”
Ø105mm
Ø2-1/4”
Ø57mm
1-7/16”
40mm
1/4”
6mm
Ø1-5/8”
Ø41mm
AC - Recommended TLW120MT050-01 / TLW277MT050
magnetic transformer (not included). Consult factory for
dimming option.
Concrete
pouring line
Weight:
1.8lbs net. (0.816kg) (base extra).
Material:
Splice box with
1/2 NPT I/O
ports for
connector and
wiring.
Solid anodized aluminum or stainless steel (303/316)
with 1/4” (6mm) thick tempered glass lens, suitable for
walk-over and driveover applications. RoHS compliant.
Mounting:
Comes with splice box, aluminum flange and level gauge.
Can be buried in earth/gravel or cast into concrete/paving
stone with or without mounting base.
Shown with standard flange (S) and (optional) mounting base.
Approval:
Wet and dry locations. Approved to US and Canadian
standards by CSA.
2-3/4”
70mm
Standard flange
7/8” (22mm)
4-7/8”
124mm
5-1/2”
140mm
Base
Height
paving
stone
66
Paving stone
flange
3-5/8” (92mm)
sand
Type:
Project:
Modified:
Emergency Driver options (remote):
MP Lighting Emergency Backup Unit
Quantity:
Input: 100-277V, 50/60HZ
Output: 11-36V, 16W
Notes:
Bodine Emergency Micro Inverter
Input: 120/ 277V, 50/ 60Hz
Output: 120/ 277V, 60Hz, 20W
CODE
L01 -
WATTAGE
COLOR
BEAM
LENS
1
RD
W
F
1 = 1W
RD = red
W= wide flood
(120°)
F = frosted
OPTION*
ANGLE BRACKET
INPUT
VOLTAGE
30
LM = louver, matte
anodized
LB = louver, black anodized
HM = hex louver, matte
anodized
HB = hex louver, black
anodized
30 = 30° angle
FLANGE HEIGHT
A = 12V AC
D = DC
BASE HEIGHT
0
S = standard flange
7/8” (22mm)
P = paving stone
flange, 3-3/8” (86mm)
0 = no base
FINISH
-
S6
S6 = stainless
steel 316
*Louver not available with
angle bracket.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com
16 West 4th Avenue, Vancouver BC, Canada, V5Y 1G3
Copyright © MP Lighting. All technical information in this document is subject to change.
08-2014
Specification Sheet
L01
Lumen test results provided by
MP Lighting integrating sphere
1W IN-GRADE
Photometric Data:
L01
1W, 120°
Clear lens
Red
27 lm
Polar Candela Distribution
Chromaticity Diagram (1W)
Illuminance at a Distance
180°
Center Beam FC
-45°
45°
approx.
17 cd
max.
-90°
0°
90°
Beam Width
9.0’
0.18
12.3’
10.5’
8.0’
0.23
10.9’
9.3’
6.0’
0.41
8.2’
7.0’
5.0’
0.60
6.8’
5.8’
3.0’
1.65
4.1’
3.5’
1.0’
14.89
1.4’
1.2’
0° Spread: 68.7°
90° Spread: 60.4°
ANSI Bin
MacAdam Ellipse
Note: Various operating factors may cause differences between lab and field results. As
specifications may change without notice, please refer to the LED Lamp Index located in the
“Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com
16 West 4th Avenue, Vancouver BC, Canada, V5Y 1G3
Copyright © MP Lighting. All technical information in this document is subject to change.
07-2013

Similar documents