iNtErGrAph CADworx & ANAlysis solUtioNs AGENDA

Transcription

iNtErGrAph CADworx & ANAlysis solUtioNs AGENDA
intergraph
Cadworx & analysis
Solutions
CAU Express 2014
AGENDA
CAU Express 2014 - The European Tour
October 7 - Amsterdam - MERCURE Amsterdam Airport
October 9 - London - Dexter House, Tower Hill
October 13 - Milan - H2C Hotel Milano
October 15 - Madrid - AC Hotel Cuzco
October 16 - Paris - Centre de Conférences Capital 8
tHe true PoWer of 3D
PLANt DeSIGN
INterGrAPH® CADWorX 2014
•Enjoy the benefits: Quicker, Shorter Learning Curve and Start-Up time, Fast
turnaround, Improved Productivity & Quality.
•Use the features: New, improved pipe routing capabilities, rule-based piping,
“drag lock“ functionality for component changes, Bi-directional Link to Analysis.
•Have it all: Intelligent Piping, Steel Modeling, ISOGEN® Isometrics, HVAC,
Laser trace & scan capabilities, Walkthrough Visualizations.
For more information visit http://www.intergraph.com/global/eu/go/analysis.aspx
Intergraph, the Intergraph logo, and CADWorx are registered trademarks of Intergraph Corporation.
Other brands and product names are trademarks of their respective owners.
CAu Express 2014 - october 2014
9.00 - 9.30
Registration
9.30 - 10.00
Welcome and Keynote
TRACKS
10.00 - 11.30
CADWorx®
Drawing production using The CAESAR II piping
OrthoGen
model, how good is it?
Educating unintelligent
objects
Demystifying ISOGEN
configuration
17.30 - 18.30
Expansion joints in
CAESAR II
Expansion joints in
heat exchangers
Program configuration is
also part of your input
CODE Case 2695 &
comparison between
ASME Division 1 &
Division 2
Break
15.45 - 16.00
16.00 - 17.30
Designing for vacuum
Lunch
13.15 - 14.15
14.15 - 15.45
PV Elite®
Break
11.30 - 11.45
11.45 - 13.15
CAESAR II®
Driving productivity with
CADWorx automation
Modal screening
Networking reception
PV Elite 2014 and
ASME SEC VII
Division 1 & 2 Edition
2013 changes
ABSTRACTS
CADWORX
Automating orthos and layouts using OrthoGen - Presented by Chris Parkin / Massimiliano Vaccari / Nicolas Lamy
OrthoGen is a tried and tested product that has been on the market for several years and is now available for CADWorx. Let us show
you how, using predefined OrthoGen Styles, you can generate drawings in minutes that would take hours using traditional drawing
production tools and techniques. With OrthoGen, learn how to set up orthographic drawing styles and have your plans and elevations
generated automatically with dimensions, line annotations, elevations and much more. If you generate plan and elevation drawings
from your CADWorx models, join us to look at this highly automated approach.
Educating unintelligent objects - Presented by Chris Parkin / Massimiliano Vaccari / Nicolas Lamy
Although CADWorx has an extensive library of components to select from sometimes you need to show something in your models that
is not “off the shelf”. In this session you will learn how to build specification based user shapes required for any project. You will also
learn how to turn any AutoCAD object into an intelligent CADWorx object using generic attach. Join us and see how to develop more
accurate plant models by allowing you to create intelligent representations of your unintelligent objects.
Demystifying ISOGEN configuration - Presented by Chris Parkin / Massimiliano Vaccari / Nicolas Lamy
ISOGEN is the industry’s de-facto standard for the production of piping isometrics from 3D models created in plant design systems,
including CADWorx. For many users however, ISOGEN configuration can be something of a mystic art or black box!
New ISOGEN Configuration aims to simplify the customization of piping isometric drawings and reports produced by ISOGEN. ISOGEN
Configuration provides an intuitive, visual approach to setting isometric drawing style properties and provides easy access to ISOGEN’s
substantial array of controls and files. Pick graphically the options you want and immediately see the impact spontaneous style modifications have on drawing output using the built-in drawing previewer.
ISOGEN Configuration de-mystifies ISOGEN and unlocks its powerful capabilities in a user friendly way, making it easier for CADWorx
users to set-up their project deliverables. In the first part of this session you will see how this new addition to I-Configure makes configuring ISOGEN, simpler, easier and faster!
All components output on ISOGEN isometric drawings are defined by a unique code called a symbol key (SKEY). ISOGEN uses an
in-built SKEY library to draw the various piping components on the isometric. Many of the symbols in the library can be changed or
redefined, whereas others are fixed by the program and cannot be changed.
Every component in a CADWorx specification needs to have a default ISOGEN Symbol key (SKEY) assigned. Sometimes you may want
a different representation of the component on the final isometric. To do this, you can either redefine the library symbol if it can be
changed, or you can create an entirely new symbol and substitute it for the default symbol.
The second part of this session will teach you all you need to know about ISOGEN SKEYs and how the latest Symbol Editor works.
Driving productivity with CADWorx automation - Presented by Chris Parkin / Massimiliano Vaccari / Nicolas Lamy
As project schedules and budgets continue to get shorter and tighter, automation will continue to be a key driver in an organisation’s
ability to increase productivity, avoid errors, and lower costs. Time and effort spent optimising CADWorx before a project starts is an
investment that will pay dividends across the entire project, not only enabling users to work more efficiently and cost-effectively during
the design phase, but also ensures higher quality information is handed over to the downstream project phases.
CADWorx offers a number of automation capabilities that companies can take advantage of – such as use of part numbering and
naming schemas, piping rules, custom pipe supports and assemblies, custom data etc. - which, combined together, help companies
to ensure that their designers produce consistent, accurate high quality designs in accordance with company and project standards.
This session will show you how to configure these capabilities so that you can employ and benefit from them on your next project.
CAESAR II
The CAESAR II piping model, how good is it? - Presented by David Diehl
Some might say any model that produces results is a good model but a nice picture does not guarantee a proper evaluation of the
piping system. This session describes what you can expect out of CAESAR II in terms of its beam bending approach, expected accuracy
of the results, model sensitivity and model verification.
Expansion joints in CAESAR II - Presented by David Diehl
There are many ways to include expansion joint assemblies in your CAESAR II analysis including the simple “zero-length” joint, the
convenient Expansion Joint Modeler and the complex, detailed model. Which one is appropriate? This session reviews the different
types of assemblies available and also discussed the wide range of modeling detail you may wish to use. We will cover the path
through the entire process – from calculating demand, selecting the joint, creating the model, and evaluating the joint.
Program configuration is part of your input, too - Presented by David Diehl
In addition to the specific model data there are many general controls that can be set for all CAESAR II analysis at the folder level. These
settings reside in the Configuration File (CAESAR.CFG). Based on your project requirements, your out-of-the-box settings here may not
produce the necessary results. These configuration switches provide latitude in program operation. This session examines the many
settings found in “Config”, some which may improve or simplify your work.
Modal screening - Presented by Duncan McElrue / Nicolas Lamy / Enrique Savoini
Piping systems in operation can experience vibration problems that typically cannot be predicted during design due to the infinite
possibilities of sources of the vibration. A good indicator of how susceptible a piping system will be to vibration is its first natural
frequency. Modal screening is a technique to use a piping systems first natural frequency as a likelihood of failure. This session will
briefly cover the basic dynamic concepts used here, followed by a review of the modal analysis input parameters. The accuracy of
the (static input) piping model will be discussed. Finally, using the natural frequency calculation as a simple screening tool for system
reliability, this will wrap up this presentation.
PV ELITE
Designing for vacuum - Presented by Mitch Sklar
The differences in design for internal pressure and external pressure, and why vessels are so susceptible to vacuum collapse when
subjected to the external pressures. Also discussed will be the method used by the ASME Section VIII, Division 1 to analyze a vessel
when vacuum conditions exist.
Expansion joints in heat exchangers - Presented by Duncan McElrue / Nicolas Lamy / Enrique Savoini
Heat exchangers having tube sheets welded (fixed) to either end of the exchanger shell (the shell side) experience both shell and tube
axial stress as a result of the different temperatures between the fluid in the shell, and the fluid in the tubes. These stresses impose
high bending stresses in the tube sheets. The solution is to insert a flexible element in the shell so that the thermal movement can be
accommodated, thus partially separating the expansion of the shell and the contraction of or vice versa. Two types of expansion joints
exist: the thin expansion joint has many thin walled convolutions, and the thick joint has one or two thicker walled convolutions. This
session will cover a brief history on the evolution of the expansion joint before comparing the two types of joints used.
CODE Case 2695 & comparison between ASME Division 1 & Division 2 - Presented by Mitch Sklar
Using Code Case 2695 can save money and weight as ASME Section VIII, Division 2 technology is used for designing vessels to Division
1, without the extra requirements of Division 2. A comparison of Division 1 and Division 2 is also discussed.
PV Elite 2014 and ASME SEC VII Division 1 & 2 Edition 2013 changes - Presented by Mitch Sklar
PV Elite 2014 had been updated with ASME SEC VIII Division 1 & 2 Edition 2013. All updates in PV Elite 2014 relevant to ASME SEC VIII
Division 1 & 2 will be discussed and evaluated through demonstration.
KEYNOTE SPEAKER
In his keynote, Peter van der Weijde, Executive Director for Intergraph CADWorx and Analysis Solutions
in Europe, will give an overview and update on the status of Intergraph’s CADWorx and Analysis business
worldwide as well as an industry outlook.
INSTRUCTORS - fOR ENGINEERS bY ENGINEERS
CADWORX
Paul Martin is a Technical Manager for Intergraph CADWorx and Analysis Solutions in Europe, and leads
the European technical team in their delivery of training, consultancy and support services. Previously, Paul
was Business Development Manager for CADWorx and Piping Solutions in Europe, the Middle East, India
and Africa. Prior to joining Intergraph, Paul was both Product Manager and Customer Support Manager,
at Alias Ltd, the vendor of ISOGEN. Paul has 20 years broad experience in the process, mechanical and
engineering software industries, where his primary focus has been the application of plant and piping
design software to improve work processes and solve engineering problems.
Chris Parkin is a Senior Application Engineer working for Intergraph CADWorx and Analysis
Solutions in the UK. Chris is responsible for providing pre and post sales technical support, customisation,
implementation and training services for the entire CADWorx product suite. Chris has over 7 years of
experience teaching designers and engineers in how to use CADWorx and associated applications in the
most efficient and productive way.
Massimiliano Vaccari is an Application Engineer working for Intergraph CADWorx and Analysis Solutions
in Italy. Massimiliano is responsible for providing pre and post sales technical support, customisation,
implementation and training services for Intergraph CADWorx & Analysis Solution Europe. Having over
13-years of plant design experience working on water and waste treatment and oil and gas plants, and
on the design of mechanical equipment for the pharmaceutical industry, enables Massimiliano to deliver
customized training and technical consultancy inline with customer needs.
CAESAR II AND pv elite
David Diehl graduated with a BSME from Lehigh University, Pensylvania, USA in 1976. Upon graduation
he took a post as a Dynaflex technical support representative for Auton Computing in New York City. After
four years David relocated to Houston, Texas providing mainframe-based piping system analysis services.
In 1986, he took a position at Intergraph CADWorx & Analysis Solutions (COADE, Inc.) introducing and
selling CAESAR II, the worlds first PC-based pipe stress analysis package. While at ICAS, Dave earned his
Professional Engineering license, served as the CAESAR II product manager, is now the lead instructor for
CAESAR II, and manages all training for ICAS. For the last ten years Dave has participated in the B31.3
Section Committee and is the former chair of the Design Task Group there. He also serves as a Director of
SPED – the Society of Piping Engineers and Designers.
Nicolas Lamy is an Application Engineer working for Intergraph CADWorx and Analysis Solutions in France.
Nicolas is responsible for providing pre and post sales technical support, customisation, implementation
and training services for the entire CADWorx and analysis product suite. Prior to joining Intergraph 3 years
ago, Nicolas worked as a Pipe stress engineer and a Pipe support designer for Nuclear projects (European
Pressurized Water Reactor). Nicolas holds a master’s degree in Physics, with a specialization in Modelling
and Simulation of Industrial Physical Systems, from the Joseph Fourier University of Grenoble, France.
Duncan McElrue is a physics graduate who spent over 16 years in the UK Defence Industry as a scientist
working on various munitions projects. He then retrained as an IT professional (Systems Administrator),
becoming a systems support and application engineer for Intergraph CADWorx and Analysis Solutions,
a role he has held for the last 5 years. Today, focusing primarily on customer support, Duncan helps
Intergraph customers gain maximum benefit and value from their investment in the CAESAR II and PV Elite
analysis products.
Enrique Savoini started his engineering career as a project engineer working for Centunion, where,
using Computer Vision software, he developed projects working in partnership with major EPC’s. In
1986, Enrique moved to the robotics division of BYG Systems, a company based inside the University of
Nottingham, where working in partnership with Taylor Hitec, he developed robotic cells and used BYG
systems software to simulate robotic cells for automated manufacturing. In 1988, Enrique moved to
Cedima, where he promoted CAD solutions like Anvil and other mechanical engineering software. Enrique
joined Intergraph in 1989. Initially focusing on and becoming a specialist in Intergraph’s PDS 3D plant
design and 2D schematic engineering solutions, since 2012, Enrique has focused mainly on CAESAR II
and PV Elite, but is also responsible for providing pre and post sales technical support, customisation,
implementation and training services for all of Intergraph’s CADWorx and Analysis solutions.
Mitchell Sklar is a registered Professional Engineer with extensive project background & situational
knowledge of design, analysis, & construction, 25+ years of evaluative expertise (Structural, Pipe Stress,
& Finite Element Analysis), Project Management, & Construction Management experience in the design
& analysis of commercial & industrial vertical structures, along with stress analysis & design of high
temperature/high pressure piping systems.
VENUE details
Amsterdam - October 7
The Mercure Amsterdam Airport Hotel is a 4 star hotel is perfectly located between the beautiful
city center of Amsterdam and Schiphol Airport.
Address: Oude Haagseweg 20 - 1066 BW, Amsterdam - Netherlands
How to get there: If you are traveling by bus you can take the 195 or 197 line which travels from
the city and through to Schiphol. Anderlechtlaan is the closest stop to the Mercure hotel. For drivers,
there is on-site parking available at a fee.
LONDON - October 9
Dexter House is a conference center located in the historic Royal Mint Court near Tower Bridge.
This place has a capacity of 300 delegates and gathers all the necessary elements to make our
event a successful and pleasant day.
Address: No. 2 Royal Mint Court - Tower Hill, London - EC3N 4QN, UK
How to get there: The Tower Hill Underground Station and Tower Gateway DLR Station are just 5
minutes walk away while there is a NCP car park near by on Whitechapel High Street.
MILAN - October 13
The H2C HOTEL Milanofiori is an innovative 4-star Hotel in a strategic location.
Address: Via Roggia Bartolomea, 5 - 20090 Assago, Milan - Italy
How to get there: Take the Milan MM2 subway and get off at the “ASSAGO MILANOFIORI NORD”. For
drivers, there is on-site parking available at a fee.
MADRID - October 15
The Marriot AC Hotel Cuzco is located in the business hub of the capital city and within a short
walking distance of the world famous Bernabéu stadium.
Address: Paseo de la Castellana, 133 - 28046 Madrid - Spain
How to get there: The Cuzco metro station is directly outside the hotel. For drivers, there is on and
off site parking available at a fee.
paris - October 16
The Centre de Conférences Capital 8 is a conference center located located in the heart of the
Golden Triangle and opposite the famous Park Monceau.
Address: 32 Rue de Monceau - 75008, Paris - France
How to get there: The metro station Monceau is just a short minute walk away from the Conference
center. For drivers, there is public parking possibilities with spaces available at the Haussman Berri,
just 350 metres from the location.
THE KING OF PIPE
STRESS ANALYSIS
INTERGRAPH CAESAR II
®
®
SETTING THE STANDARD FOR PIPE
STRESS ANALYSIS WORLDWIDE
CAESAR II is the world standard pipe stress analysis software that evaluates structural responses and stresses
of piping systems to international codes and standards. It offers an accurate and easy-to-use interface between
3D design and stress analysis.
Have it all! CAESAR II incorporates seamless, bi-directional links between plant design and engineering
analysis; the passing of data can be performed effectively between these workgroups.
Global compliance! The design tools and wizards produce analysis results in compliance with over 35
international piping codes.
Manage data easier! Input and display all the data needed to accurately define a piping system analysis
model and ensure the use of correct datasets for each analysis.
For more information visit http://www.intergraph.com/global/eu/go/analysis.aspx
Intergraph, the Intergraph logo, and CAESAR II are registered trademarks of Intergraph Corporation.
Other brands and product names are trademarks of their respective owners.
SIZESIZE
does
Matter
does
Matter
Big projects
from small
budgets.
Big projects
from
small budgets.
©2014 Intergraph Corporation. All rights reserved. Intergraph is part of Hexagon. Intergraph and the Intergraph logo are registered trademarks
of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. Intergraph believes the information in
this publication is accurate as of its publication date. Such information is subject to change without notice and is subject to applicable technical
product descriptions. Intergraph is not responsible for inadvertent errors.