CANopen application for WinAC RTX Realtime application for WinAC RTX

Transcription

CANopen application for WinAC RTX Realtime application for WinAC RTX
http://support.automation.siemens.com/WW/view/en/98278416
CANopen application for
WinAC RTX
Realtime application for WinAC RTX
General
Supported CAN-Interfaces:
The CANopen application for WinAC RTX is
based on WinAC CAN basic driver.
- On-board CAN Microbox IPC427B/C/D
- On-board CAN Nanobox IPC227D
- PCI104 Board COM168 V2
The applications generator allows to configure the devices in a comfortable way and generates the functionsblocks. The WinAC is already configured as CANopen Master.
Functionality
The user interface of the application is created for a simple use to modify the device parameter.
The application generator creates the required function blocks. These function
blocks will be integrated in the delivered
TIA-Portal project.
The WinAC RTX is located as the Master in
the CANopen network and manages the
communication between the configured devices.
Procuct contents
- Realtime driver(.rtdll)
- Step7 v12 Project (FBs/FCs)
- Application-Generator
- Documentation
Contact
Siemens AG
GER I CS WEST PRS-APCIA
Competence Center Cologne
Franz-Geuer-Straße 10
D-50823 Cologne
Tel: +49 221 576-3026
Fax: +49 221 576-2936
[email protected]
http://www.siemens.com/industry