3D Body Scanning Technologies Proceedings of the 5 International Conference on

Proceedings of the
5th International Conference on
3D Body Scanning Technologies
Lugano, Switzerland, 21-22 October 2014
Editor and Organizer
Hometrica Consulting - Dr. Nicola D’Apuzzo
Switzerland
www.hometrica.ch
This compilation © 2014 by Hometrica Consulting - Dr. Nicola D’Apuzzo, Switzerland. Reproduction of
this volume or any parts thereof (excluding short quotations for the use in the preparation of reviews
and technical and scientific papers) may be made only after obtaining the specific approval of the
publisher. The papers appearing in this volume reflect the author’s opinions. Their inclusion in this
publication does not necessary constitute endorsement by the editor or by the publisher. Authors retain
all rights to individual papers.
ISBN 978-3-033-04763-1
DOI 10.15221/14
http://dx.doi.org/10.15221/14
Published by
Hometrica Consulting - Dr. Nicola D’Apuzzo
Via Collegio 28, CH-6612 Ascona, Switzerland
Tel: +41 91 7915524
Email: [email protected]
Web: www.hometrica.ch
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
Table of contents
9
Introduction
Technical Session 1: Medical Applications
pag.
FaceSCAN3D – Photorealistic 3D Images for Medical Applications
10
Stefan KARBACHER, Klaus VEIT
3D-Shape GmbH*, Germany
Visualization and Quantification of Female Breast Morphology During Breast Reconstruction
21
1
Audrey L. CHEONG , Gregory P. REECE2, Michelle C. FINGERET2,3, Fatima MERCHANT1,4
1
Department of Electrical and Computer Engineering, University of Houston, Houston, TX, USA;
2
Dept. of Plastic Surgery, The University of Texas MD Anderson Cancer Center, Houston, TX, USA;
3
Dept. of Behavioral Science, The University of Texas MD Anderson Cancer Center, Houston, TX, USA;
4
Department of Engineering Technology, University of Houston, Houston, TX, USA
,
Multi-View 3D Data Fusion for Visualization of the
Inframammary Fold in Women with Ptotic Breasts
29
Lijuan ZHAO1, Gregory P. REECE2, Michelle C. FINGERET2,3, Fatima MERCHANT1,4
1
Department of Computer Science, University of Houston, Houston (TX), USA;
2
Department of Plastic Surgery, The University of Texas MD Anderson Cancer Center, Houston (TX), USA;
3
Dept. of Behavioral Science, The University of Texas MD Anderson Cancer Center, Houston (TX), USA;
4
Department of Engineering Technology, University of Houston, Houston (TX), USA
The Latest Applications of 4D in Medical Projects
39
Chris LANE
3dMD LLC, Atlanta GA, USA
Establishment of Reference Frame for Sequential Facial Biometrics
40
L. Zou1, P. Hao2, M. McCarthy3
1
Barts and The London School of Medicine and Dentistry, QMUL, UK;
2
School of Mathematical Science, QMUL, UK;
3
National Physical Laboratory (NPL), UK
Technical Session 2: Body Scanning for Apparel I
pag.
The Use of 3D Anthropometric Data for Morphotype Analysis
to Improve Fit and Grading Techniques – The Results
46
1
Joris COOLS , Alexandra DE RAEVE1, Peter VAN RANSBEECK2, Simona VASILE1,
2
2
Benjamin VANDERSMISSEN , Mathias VERMEULEN
1
University College Ghent, Faculty of Science and Nature, Department of Fashion,
Textile and Wood Technology, Gent, Belgium;
2
University College Ghent, Faculty of Science and Nature, Department of Mechatronics, Gent, Belgium
The True Height of the Waist: Explorations of Automated Body
Scanner Waist Definitions of the TC2 scanner
1
1
55
2
2
Simeon GILL , Christopher J. PARKER , Steve HAYES , Kathryn BROWNBRIDGE ,
Paula WREN2, Anastasiia PANCHENKO2
1
The University of Manchester, Manchester, UK;
2
Manchester Metropolitan University, Manchester, UK
Applicability of 3D Garment Prototyping in Assessment of Garment Fit
1
2
3,4
66
1
Agnieszka CICHOCKA , Sylwia SERWATKA-BOBER , Pascal BRUNIAUX , Paulina PODLAS
1
Lodz University of Technology, Institute of Architecture of Textiles,
Department of Clothing Technology and Textronics, Lodz, Poland;
2
Nicolaus Copernicus University in Torun, Ludwik Rydygier Collegium Medicum, Bydgoszcz, Poland;
3
Ecole Nationale Superiéure des Arts et Industries Textile, Roubaix, France;
4
University Nord of Lille, Lille, FranceFrance
-3-
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
Applications for 3D Virtual Sampling and Body-Scanning in Fashion Schools and
Universities, Apparel Retailers, Brands and Manufacturers
73
Thierry MONCOUTIE
Lectra, Paris, France
A Flexible Multi-Platform 3D Virtual Product Configurator
74
Andrea Motta
Nobrandsolution s.r.l./ Motta Alfredo SpA, Cinisello Balsamo, Italy
Technical Session 3: Ergonomics & Product Design
pag.
Latest Trends in Sport Equipment Realization - Case History Presentation
76
Emidio M. CENNERILLI, Serena SANTORO
EGS, San Lazzaro di Savena (BO), Italy
Ergonomic Design and Evaluation of a Pilot Oxygen Mask for Korea Air Force Pilots
84
1
Wonsup LEE , Daehan JUNG2, Seikwon PARK3, Hee-Eun KIM4, Heecheon YOU1
1
Industrial and Management Engineering, POSTECH, South Korea;
2
Department of Mechanical Engineering, Korea Air Force Academy, Cheongwon, South Korea;
3
Department of Systems Engineering, Korea Air Force Academy, Cheongwon, South Korea;
4
Department of Clothing and Textiles, Kyungpook National University, Daegu, South Korea
Development of a Foot Sizing System for Malaysian Women
93
Shaliza Mohd SHARIFF1,6,7, Yii Bonn BONG1, ASMA Ahmad SHARIFF1,3, Makiko KOUCHI4,
Kozo KIMURA5, Amir Feisal MERICAN1,2, Omar bin Mohd RIJAL8, Norliza Mohd NOOR9
1
Centre of Research for Computational Sciences and Informatics in Biology, Bio industry,
Environment, Agriculture and Healthcare, University of Malaya, Kuala Lumpur, Malaysia;
2
Institute of Biological Sciences, Faculty of Science, University of Malaya, Kuala Lumpur, Malaysia;
3
Centre for Foundation Studies in Science, University of Malaya, Kuala Lumpur, Malaysia;
4
Digital Human Research Center, National Institute of Advanced Industrial Science and Technology,
Tokyo, Japan;
5
I-Ware Laboratory Co., Ltd, Minoh City, Osaka, Japan;
6
Institute Postgraduate Studies, University of Malaya, Kuala Lumpur, Malaysia;
7
Fashion Department, Faculty of Art & Design, University Technology MARA, Shah Alam, Selangor, Malaysia;
8
Institute of Mathematical Sciences, Faculty of Science, University of Malaya, Kuala Lumpur Malaysia;
9
School of Engineering and Advanced Technology, University of Technology, Malaysia, Campus Jalan
Semarak, Kuala Lumpur, Malaysia
Individualisation of Multifunctional, Concealed Body Armour’s Design - Acronym: SECRET
99
J. Błaszczyk, M. Fejdyś, G. Grabowska, E. Maklewska, M.Struszczyk, D. Zielinska
Institute of Security Technologies MORATEX, Lodz, Poland
Technical Session 5: 3D Scanning in Medicine
pag.
Latest Trends in Prosthesis Application Presentation of real case of Total Upper Rehabilitation
102
Emidio M. CENNERILLI, Serena SANTORO
EGS, San Lazzaro di Savena (BO), Italy
Laser Based Spatial Spine Curve Determination in Scoliosis
115
Primož POREDOŠ1, Dušan ČELAN2, Janez MOŽINA1, Matija JEZERŠEK1
1
University of Ljubljana, Faculty of Mechanical Engineering, Ljubljana, Slovenia;
2
University Medical Centre Maribor, Maribor, Slovenia
Integrating a 3D Body Scanner into an Active Bariatric Surgery Clinic Practical Experiences, History, Tips and Pitfalls
1
2,3
4
David B. STEFAN , Stephen D. WOHLGEMUTH , David A. GILBERT
1
Novaptus Systems, Inc. Chesapeake, VA, USA;
2
Eastern Virginia Medical School, Norfolk, VA, USA;
3
Sentara Comprehensive Weight Loss Solutions, Norfolk, VA, USA;
4
The Hague Plastic and Cosmetic Surgery Center, Norfolk, VA, USA
-4-
124
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
3D Scanning in Myofascial Dysfunction Detection
137
Wojciech KURZYDLO1, Miroslawa M. DLUGOSZ2
1
Collegium Medicum at Jagiellonian University, Krakow, Poland;
2
AGH University of Science and Technology, Krakow, Poland
Technical Session 6: Anthropometric Studies & Surveys
pag.
Data Processing and Analysis for the 2012 Canadian Forces3D Anthropometric Survey
142
Chang SHU1, Pengcheng XI1, Allan KEEFE2, Monica JONES2f
1
National Research Council of Canada, Ottawa, Canada;
2
Defence Research and Development Canada, Toronto, Canada
Establishing a Pre and Post-3D Bodyscanning Survey Process for Able-Bodied UK Women
Aged 55 Years+ to Determine an Appropriate Waist Position for Garment Development
1
2
1
143
1
Paula WREN , Simeon GILL , Steven HAYES , Phoebe APEAGYEI
1
Manchester Metropolitan University, Department of Apparel, Hollings Faculty, Manchester, UK;
2
Manchester University, School of Materials, Manchester, UK
The Body Shape of Brazilian Woman
155
Sergio F. BASTOS, Flávio G. SABRÁ
SENAI CETIQT, Rio de Janeiro, Brazil
Three-Dimensional (3D) Anthropometry Study of the Malaysian Population
167
1,2
1
1
Yii Bonn BONG1, Amir F. MERICAN , Suhaila AZHAR , Tahereh MOKHTARI ,
1,3
1,3
Abdul Majid MOHAMED , Asma A. SHARIFF
1
Centre of Research for Computational Sciences and Informatics in Biology, Bio industry, Environment,
Agriculture and Healthcare, University of Malaya, Kuala Lumpur, Malaysia;
2
Institute of Biological Sciences, Faculty of Science, University of Malaya, Kuala Lumpur, Malaysia;
3
Centre for Foundation Studies in Science, University of Malaya, Kuala Lumpur, Malaysia
Technical Session 7: 3D Scanning to 3D Printing
pag.
An Open Source, Low-Cost, Multi Camera Full-Body 3D Scanner
174
Richard GARSTHAGEN
3Dmij.nl, Zoetermeer, The Netherlands
ReconstructMe – Towards a Full Autonomous Bust Generator
184
Christoph KOPF, Christoph HEINDL, Martin ANKERL, Harald BAUER, Andreas PICHLER
Profactor GmbH, Steyr (Upper Austria), Austria
Scan to Print within 5 Minutes – 3D Figurine Production
with VITRONIC’s Body Scanner VITUS
191
Julian MARTINI
VITRONIC Dr.-Ing. Stein Bildverarbeitungssysteme GmbH, Wiesbaden, Germany
A Low Cost 3D Scanning and Printing Tool for Clinical Use
in the Casting and Manufacture of Custom Foot Orthoses
1,2
2
192
2
Colin E. DOMBROSKI , Megan E.R. BALSDON , Adam FROATS
1
Department of Physical Therapy, Western University, London, Canada;
2
SoleScience Inc., London, Canada
Technical Session 8: Body Scanning for Apparel II
pag.
Realistic Virtual System “Female Body – Dress” Based on Scanning Technologies
196
V. KUZMICHEV1, MengNa GUO2
1
Ivanovo State Polytechnic University, Ivanovo, Russia;
2
Jianghan University, Wuhan, China
-5-
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
3D Color Body Scanning for Improved Sample Fit and Accuracy in Garment Design
205
Andre WEST, Ashley GABEL
NC State University College of Textiles, Department of Textiles and Apparel,
Technology and Management, Raleigh, NC, USA
Evaluation of Change in Air Gap Underneath the Garment for
Various Pro-Longed Body Postures Using 3D Body Scanning
1,2
1
2
210
1
Emel MERT , Agnes PSIKUTA , Marie-Ange BUENO , René M. ROSSI
1
Laboratory for Protection and Physiology, Empa – Swiss Federal Laboratories for
Materials Science and Technology, St. Gallen, Switzerland
2
Univ. Haute Alsace, Laboratoire de Physique et Mécanique Textiles,
Ecole Nationale Supèrieure d’Ingénieurs, Haute Alsace, Mulhouse, France
New 3D Scan-Method for Quantification of Discretion;
Application to Body-Close Incontinence Protection
1
2
2
218
1
Anne FARBROT , Stefan ROSÉN , Erik NYKVIST , Josefine WIHLBORG
1
SCA Hygiene Products AB, Global Hygiene Category, Gothenburg, Sweden;
2
Toponova Engineering AB, Halmstad, Sweden
Technical Session 9: Hand Held Scanning Systems
pag.
Hand-Held Body Scanning Concept Adds a New
Dimension to the Process of 3D Image Capture
224
Michael BOYLAN, Albert CHARPENTIER, Bob KUTNICK, Kent WORSNOP
Unique Solutions Designs Ltd. / MeAlity, Dartmouth, NS, Canada
Measurement of Head-to-Trunk Orientation Using Handheld 3D Optical Apparatus
225
Urban PAVLOVČIČ, Janez DIACI, Janez MOŽINA, Matija JEZERŠEK
Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, SI-1000 Ljubljana, Slovenia
Handheld 3D Scanning System for In-Vivo Imaging of Skin Cancer
231
Miguel ARES*, Santiago ROYO, Meritxell VILASECA, Jorge A. HERRERA,
Xana DELPUEYO, Ferran SANABRIA
CD6 UPC Barcelona Tech, Terrassa (Barcelona), Spain
Technical Session 10: Body Scanning Assessment & Use
pag.
3D-Based Resources Fostering the Analysis, Use, and Exploitation
of Available Body Anthropometric Data
237
Alfredo BALLESTER*, Eduardo PARRILLA, Jordi URIEL, Ana PIEROLA, Sandra ALEMANY,
Beatriz NACHER, Jorge GONZALEZ, Juan Carlos GONZALEZ
Instituto de Biomecánica de Valencia (IBV), Spain
Posture Dependency of 3D-Body Scanning Data for a Virtual
Product Development Process in Apparel Industry
1,2
248
1
Michael ERNST , Ute DETERING-KOLL
1
Niederrhein University of Applied Sciences, Germany;
2
Cape Peninsula University of Applied Sciences, South Africa
Practical Considerations of Applying Body Scanning as a Teaching and Research Tool
259
Simeon GILL1, Paula WREN2, Kathryn BROWNBRIDGE2, Steve HAYES2, Anastasiia PANCHENKO2
1
The University of Manchester, Manchester, UK;
2
Manchester Metropolitan University, Manchester, UK
Perception vs Reality: 3D Body Image, Self-Esteem and Vanity Sizing
Marie-Ève FAUST1, Isabelle LESSARD2, Marie-Ève BLACKBURN3,4
1
Philadelphia University, Fashion Merchandising Management,
School of Business Administration, Philadelphia, PA, USA;
2
Vestechpro, Apparel Research and Innovation Center, Montréal, QC, Canada;
3
ÉCOBES – Recherche et transfert at Cégep de Jonquière, Jonquière, QC, Canada;
4
Département des sciences de la santé, Université du Québec à Chicoutimi, Chicoutimi, QC, Canada
-6-
269
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
My_Healthy_Shape Guide: An interactive Educational-Health Tool
for Malaysian Based on Body Shape
275
1
Hasfaliza TUMIN , Asma AHMAD SHARIFF1,2, Amir Feisal MERICAN1,3
1
Centre of Research for Computational Sciences and Informatics in Biology, Bioindustry, Environment,
Agriculture and Healthcare (CRYSTAL), University of Malaya, Malaysia;
2
Centre of Foundation Studies in Science, University of Malaya, Malaysia;
3
Institute of Biological Sciences, Faculty of Science, University of Malaya, Malaysia
Technical Session 11: Body Scanning for Sport & Health
pag.
Athletic Sizing Based on Performance
280
Ashley GABEL, Andre WEST
NC State University College of Textiles, Department of Textiles and Apparel,
Technology and Management, Raleigh, NC, USA
Kinanthropometry Applications of Depth Camera Based 3D Scanning
Systems in Cycling: Repeatability and Agreement with Manual Methods
290
Alice BULLAS, Simon CHOPPIN, Ben HELLER, Sean CLARKSON, Jon WHEAT
Centre for Sports Engineering Research, Sheffield Hallam University, Sheffield, UK
Theory and Practical Steps to Introducing a New 3D Public Health Indicator to Replace
BMI Using Existing Population-Based Multidimensional Reference Measurement Sets
299
David B. STEFAN1, Stephen D. WOHLGEMUTH2,3, David A. GILBERT4
1
Novaptus Systems, Inc. Chesapeake, VA, USA;
2
Eastern Virginia Medical School, Norfolk, VA, USA;
3
Sentara Comprehensive Weight Loss Solutions, Norfolk, VA, USA;
4
The Hague Plastic and Cosmetic Surgery Center, Norfolk, VA, USA
Body Mass Components in the Young Soccer Players in R. Macedonia
313
S. Nikolic, V. Maleska-Ivanovska, Lj. Efremovska, L. Todorovska,
J.Pluncevic-Gligorovska, I. Karadgozova
Dept. of Physiology, Medical faculty, Skopje, R. Macedonia
Analyze of Anthropometric Parameters of Soccer Players
Aged 14 to 17 Years In R. Macedonia
314
V. Maleska-Ivanovska, Lj. Efremovska, J. Pluncevic-Gligorovska, L. Todorovska,
S. Nikolic, I. Karadgozova
Dept. of Physiology, Medical faculty, Skopje, R. Macedonia
Analysis of Body Mass Components in Young Basketball Players
315
Lj. Efremovska1, S. Nikolic1, V. Maleska-Ivanovska1, J. Pluncevic-Gligorovska1,
L. Todorovska1, I. Karagjozova1, E. Ivanovska2
1
Dept. of Physiology, Medical faculty, Skopje, R. Macedonia;
2
PZU Promedica, Medical Prima, Skopje, R. Macedonia
Technical Session 12: Body Modeling & Avatars
pag.
Obtaining Personal Figure Mannequin Using Two Photographs
for Three-Dimensional Corsetry Design
321
Nadezhda KORNILOVA1, Anna GORELOVA1,2, Dmitry VASILYEV2
1
Ivanovo State Polytechnic University, Ivanovo, Russia;
2
IIT Consulting Ltd, Ivanovo, Russia
A Pose Invariant Statistical Shape Model for Human Bodies
327
1
Matteo COLAIANNI , Michael ZOLLHÖFER1, Jochen SÜßMUTH2,
2
1
Bettina SEIDER , Günther GREINER
1
Computer Graphics Group, University Erlangen-Nürnberg, Germany
2
Adidas Group, Germany
Methodology for Transformation of Individual Scan Data
into Realistic Animated Human Models
Christine MEIXNER1, Sybille KRZYWINSKI2
1
Laloni GmbH, Nusshof, Switzerland;
2
TU Dresden, Germany
-7-
337
5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 21-22 October 2014
Framework of Understanding Somatological Constructs Relative to the Fit of Apparel
347
Frederick S. COTTLE1, Pamela V. ULRICH2, Karla P. TEEL2
1
Middle Tennessee State University, Murfreesboro (TN), USA;
2
Auburn University, Auburn (AL), USA
A 3D Dynamic Database for Unconstrained Face Recognition
357
Taleb ALASHKAR1, Boulbaba Ben AMOR1, Mohamed DAOUDI1 , Stefano BERRETTI2
1
Télécom Lille/LIFL (UMR CNRS/Lille1 8022), Villeneuve d'Ascq, France ;
2
University of Florence, Florence, Italy
Technical Session 13: Scanning with Depth Cameras
pag.
A Low Cost and Easy to Use Setup for Foot Scanning
365
C. Lovato, E. Bissolo, N. Lanza, A. Stella, A. Giachetti
Dep. of Computer Science, University of Verona, Verona, Italy
A Validation Study of a Kinect Based Body Imaging (KBI)
Device System Based on ISO 20685:2010
1
1
2
372
1
3
Sara BRAGANÇA , Miguel CARVALHO , Bugao XU , Pedro AREZES , Susan ASHDOWN
1
University of Minho, Portugal;
2
University of Texas at Austin, USA;
3
Cornell University, USA
3D Reconstruction of Body Parts Using RGB-D Sensors:
Challenges from a Biomedical Perspective
378
Pedro COSTA1,2, Hooshiar ZOLFAGHARNASAB1,2, João P. MONTEIRO2,
Jaime S. CARDOSO1,2, Hélder P. OLIVEIRA 2
1
Faculdade de Engenharia, Universidade do Porto, Porto, Portugal;
2
INESC TEC, Porto, Portugal
Use of Kinect Tool to Measure the Physical Capabilities of Patients for Wolf
Motor Function Test in Centre Hospitalier Universitaire de Grenoble (CHU)
390
Amirmahdi TAHERI1, Julien VEYTIZOU1, Guillaume THOMANN1, Antoine THURIOT2
1
Laboratoire des sciences pour la conception, l'optimisation et la production (G-SCOP)
CNRS: UMR5272, Inst. National Polytechnique de Grenoble (INPG), Univ. Joseph Fourier, Grenoble I, France
2
Ecole de kinésithérapie du Centre Hospitalier Universitaire de Grenoble (CHU), France
Technical Session 14: Body Scanning for Apparel III
pag.
3D Digital Technologies for Virtual Fitting of Garments in Tailor-Made Application
399
Eric R. HARVEY1, Jocelyn BELLEMARE2, Denis BOULANGER1,
3
4
Isabelle LESSARD , Philippe PROULX
1
CIMMI, Quebec City (QC), Canada;
2
UQAM, Montreal (QC), Canada;
3
Vestechpro, Montreal (QC), Canada;
4
Cégep de Sainte-Foy, Quebec City (QC), Canada
Virtual Fitting by Single-Shot Body Shape Estimation
406
Masahiro SEKINE1, Kaoru SUGITA1, Frank PERBET2, Björn STENGER2, Masashi NISHIYAMA1
1
Corporate Research & Development Center, Toshiba Corporation, Japan;
2
Toshiba Research Europe Ltd., Cambridge Research Laboratory, UK
Anthropometric Study by Diagonising and Antagonizing the Feel Factor of ‘Ideal
Fabric’ with ‘Reference Fabric’ for Frugal Engineering of Foundation Garments
414
K.V.P. Singh 1, A. Chatterjee1, A. Das2, Raul Fangueiro3
1
Department of Textile Technology NIT Jalandhar, Punjab, India;
2
Department of Textile Technology IIT Delhi, India;
3
Department of Textile Engineering University of MINHO, Portugal
422
Author index
-8-