Document 6576609

Transcription

Document 6576609
Installation of AL300D in OS X
Page 2-3 Install AL300D
Page 4-5 Uninstall AL300D
Page 6 How to use AL300D in OS X
Install AL300D
1) Insert AL300D in a available USB port on your mac computer.
2) Driver is located in the “mac” folder “. Open folder based on your OS X version.
3) Start the installation file (see arrow)
4) Click Continue
5) Click Install
-2-
6) Enter your OS X system password and click OK.
7) Click Continue installation.
8) Please wait until the installation process is finished.
9) The installation is now finished. The computer needs a reboot to complete.
Click Reboot.
-3-
Uninstall AL300D
1) Driver is located in the “mac” folder “. Open folder based on your OS X version.
2) Start the uninstallation file (see arrow).
3) Click Continue
4) Click Uninstall
-4-
5) Enter your OS X system password and click OK.
6) Click Continue installation.
7) The uninstallation is now finished. The computer needs a reboot to complete.
Click Reboot.
-5-
How to use AL300D in OS X
1) Start AL300D software by click the icon on top of screen (See arrow).
2) Select the wireles network you want to join, and click Connect.
3) If the wireless network require a encryption key,
you will see this page. Enter the encryption
key and click OK.
-6-
4) To view status of wireless connection
you can visit the Link Status page.