MicroStop EndoWorld Sterile containers and accessories

EndoWorld®
SERVICE 2-1 12/2011-E
MicroStop®
Sterile containers and accessories
MicroStop® ste
Bridging the gap between the OR,
for safe OR and CSS
erile containers
, disposal, sterilization and storage
SD routine operations
MicroStop –
An intelligent solution both in form and function
®
Today clinics face a dual challenge: On the one hand, the
utmost safety in terms of cleanliness and sterility must
be ensured in the OR and, on the other hand, increasing
cost pressures in all areas demand the most cost-efficient
solutions possible.
MicroStop® sterile containers help you to tackle this
challenge: They offer maximum safety and, at the same time,
thanks to their innovative technology, also help to cut costs.
The sterile system without exchangeable filters boasts no
follow-up costs and, as such, is an effective and low-cost
alternative to soft packaging and containers with disposable
filters.
From the closing mechanism with an optional seal, the
innovative germ barrier system with the “green check pin” to
the integrated sterilization indicator with red/green display,
the MicroStop® sterile container system offers everything
for making OR and CSSD routine work simpler and safer.
4 5
Germ-safe MicroStop® disk
Lid with “green check”
Protection against
external factors
Perfection and safety down
to the very last detail
The germ barrier
The sterile container’s germ barrier comprises the
MicroStop® disk and the subsystem on the inside
of the lid. How it works: Thanks to the special
geometry, the airflow and micro-organisms are
separated. The germs are unable to migrate past
the barrier. Separation efficiency of 99.99997% has
been demonstrated in tests. This system makes
disposable filters a thing of the past!
The overall concept
Sterile containers with the MicroStop® system
offer more than just an outstanding germ barrier;
the entire concept which successfully sets new
standards has been carefully developed and
optimized for quick use in the OR and sterile areas.
Logical engineering down to the very last detail
•
•
•
•
•
•
Coding labels with various colored flags
Clips for protocol labels of various sizes
Opening button with the option of using a seal
Ergonomic handles
Stacking feature on the lid
Suitable for all standard sterilization trays
The advantages are obvious
• Easy visual inspection of the microbiological
barrier
• Clear process controls with sterilization indicator
• No risk of perforation with sharp instruments (in
contrast to soft packaging and disposable filters)
• No follow-up costs from consumables
• Fewer disposable products, less waste, reduced
costs for disposal
• There is no risk of accidental opening with the red/
green sterilization indicator
6 7
Practical and economic thanks to the optimal selection of materials
The MicroStop® disk and the container lid are made of heatresistant and steam-sterilizable high-performance plastic – scratchproof, extremely impact-resistant, highly chemical-resistant and
dimensionally stable.
The container basins are produced from high-quality aluminum with
a particularly hard anodized surface.
The physical properties of aluminum mean that the containers have
a high heat storage capacity and good thermal conductivity. As such,
excellent drying times are guaranteed.
Tested and certified safety
The MicroStop® sterile barrier system offers an outstanding separation
efficiency of 99.99997%. This impressive value has been repeatedly
confirmed in numerous independent studies.
The lid design features lateral flow paths and thus provides first-class
protection from external influences.
It goes without saying that all parts of the MicroStop® system comply
with the requirements of the relevant national and international
standards.
Further advantages of this innovative storage system are its simple
handling and unmistakable logistics based on the variable colored
coding label system.
High-quality materials and numerous intelligent workmanship details
round the system off.
Certified and validated
MicroStop® and MiniSet sterile containers
Comply with the requirements of national and international standards
for packaging systems
• ISO 11607 Part 1 and Part 2:2006 and EN 868 Part 8:1999,
DIN 58953 Part 9:2002
• CE-marking as per MDD 93/42 EEC
• Approved for steam sterilization as per EN 285:2006 + A1:2008
and validated as per ISO 17665 Part 1:2006
MiniSet sterile containers suitable for type B and type S (S, if
specified by the sterilizer manufacturer) as per EN 13060:2004.
MiniSet sterile containers, spare parts and accessories
MiniSet sterile containers
Outer dimensions
W x D x H (mm)
Inner dimensions
W x D x H (mm)
Article no.:
310 x 189 x 65
283 x 177 x 40
39780 A
310 x 189 x 80
283 x 177 x 60
39781 A
Coding labels and coding framelets for lids
Designation
Article no.:
Coding label, lettered
39763 A
Coding label, blank
39763 B
Designation
Article no.:
Coding framelet – black
39762 A
Coding framelet – white
39762 B
Coding framelet – red
39762 C
Coding framelet – blue
39762 D
Coding framelet – green
39762 E
Coding framelet – yellow
39762 F
Coding framelet – violet
39762 G
Coding framelet – orange
39762 H
Coding framelet – gray
39762 I
Designation
Article no.:
Coding label, lettered
39764 A
Coding label, blank
39764 B
Coding labels for basins
8 9
Seals
Designation
Article no.:
Seal without indicator, 1000 pcs.
39763 PKA
Seal with indicator, 1000 pcs.
39763 PKB
Designation
Article no.:
Germ barrier disk
39760 A
Silicone seal, container lid
38785 AD
Spare parts
Storage accessories for MiniSet sterile containers
Trays
Designation
Dimensions
L x W x H (mm)
Article no.:
Wire mesh tray
260 x 165 x 28
39502 MA
Wire mesh tray
260 x 165 x 47
39502 MB
Designation
Dimensions
L x W (mm)
Article no.:
Small diamond grid
250 × 155
39100 SMS
Silicone grid inserts
MicroStop® sterile containers, spare parts and accessories
Sterile containers
Outer dimensions
W x D x H (mm)
Inner dimensions
W x D x H (mm)
Article no.:
600 x 300 x 110
548 x 267 x 88
39750 A2
600 x 300 x 140
548 x 267 x 113
39751 A2
600 x 300 x 160
548 x 267 x 138
39752 A2
600 x 300 x 210
548 x 267 x 186
39753 A2
300 x 300 x 110
262 x 267 x 88
39740 A2
300 x 300 x 140
262 x 267 x 113
39741 A2
300 x 300 x 160
262 x 267 x 138
39742 A2
300 x 300 x 210
262 x 267 x 186
39743 A2
Coding labels and colored flags
Designation
Article no.:
Coding label, lettered
39763 A2
Coding label, blank
39763 B2
Designation
Article no.:
Color-flag – black
39762 A2
Color-flag – white
39762 B2
Color-flag – red
39762 C2
Color-flag – blue
39762 D2
Color-flag – green
39762 E2
Color-flag – yellow
39762 F2
Color-flag – violet
39762 G2
Color-flag – orange
39762 H2
Color-flag – gray
39762 I2
Designation
Article no.:
Seal without indicator, 1000 pcs.
39763 PA
Seal with indicator, 1000 pcs.
39763 PB
Seals
Spare parts
Designation
Article no.:
Germ barrier disk
39760 A2
Silicone seal for lid 300 x 300 mm
39745 AD
Silicone seal for lid 600 x 300 mm
39755 AD
Centering device for silicone seal for lid
39755 X
600 x 300
Storage accessories for MicroStop® sterile containers
Standard trays
Designation
Dimensions
L x W x H (mm)
Article no.:
240 × 250 × 50
39502 XH
480 × 250 × 50
39502 X
240 x 250 x 66
39502 ZH
480 x 250 x 66
39502 Z
535 x 250 x 66
39502 ZL
Designation
Dimensions
L x W (mm)
Article no.:
Large diamond grid
240 × 230
39100 SH
470 × 240
39100 S
525 × 240
39100 SL
240 × 230
39100 SHS
Wire mesh tray,
stackable
Wire mesh tray,
stackable
Silicone grid inserts
Small diamond grid
10 11 12
Fixation system for standard trays
Designation
Fixation posts
pack of 12
Silicone tie-downs
pack of 12
Length (mm)
Article no.:
38
39100 PS
6 measuring 85 mm
and 6 measuring
95 mm
39360 AS
Dimensions
L x W x H (mm)
Article no.:
Instrument racks for standard trays
Designation
Instrument rack LAP
460 × 238 × 125
39219 XV
Instrument rack
- LAP set (including wire mesh tray
39502 X)
480 x 250 x 130
39219 XX
Instrument rack
UNIVERSAL
460 × 233 × 145
39219 XU
Notes
KARL STORZ GmbH & Co. KG
Mittelstraße 8, 78532 Tuttlingen, Germany
Postbox 230, 78503 Tuttlingen, Germany
Phone: +49 (0)7461 708-0
Fax: +49 (0)7461 708-105
E-Mail: [email protected]
www.karlstorz.com
KARL STORZ Endoscopy-America, Inc.
2151 East Grand Avenue
El Segundo, CA 90245-5017, USA
Phone: +1 424 218-8100
Phone toll free: 800 421-0837 (US only)
Fax: +1 424 218-8525
Fax toll free: 800 321-1304 (US only)
E-Mail: [email protected]
96212008 SERVICE 2-1 12/2011/EW-E
www.karlstorz.com
EndoWorld®