CO TT O CONTEMPO GLAZED

Transcription

CO TT O CONTEMPO GLAZED
GLAZED PORCELAIN with REVEAL IMAGING ™
COTTO CONTEMPO
™
COTTO CONTEMPO ™
GLAZED PORCELAIN with REVEAL IMAGING ™
A SOPHISTICATED,
MODERN TAKE ON
CLASSIC COTTO
Expansive as it is stunning, this gorgeous, upscale glazed
porcelain marries a bold cotto look with elements of
cracked cement. Equally at home in an urban loft or
country villa, Cotto Contempo’s contemporary, largeformat tiles are a great choice for floors, walls, countertops
and more. With its earthy, dimensional hues and multifaceted color variance, Cotto Contempo offers stunning,
modern style in four colors to indoor and outdoor spaces.
• STYLISH COTTO LOOK WITH A TWIST
-- Fresh contemporary look combines traditional cotto
with elements of cracked cement
-- Four color options offer a high level of variation and
color depth for a rich, earthy appearance
• VERSATILITY IN APPLICATION
-- Ideal for extending the visual of your indoor
space outdoors
FINISH THE LOOK
Create a custom look with unique tile pattern ideas.
BRICKWORK
CHEVRON
DIAMOND
12 x 24 Field Tile
12 x 24 Field Tile
13 x 13 Field Tile
Above photo features 20 x 20 field tile in Michigan Avenue on floor.
Cover photo features 12 x 24 field tile in Wall Street on floor.
COTTO CONTEMPO™
GLAZED PORCELAIN with REVEAL IMAGING ™
FIELD TILE
PENNSYLVANIA AVENUE CC12
WALL STREET CC13
SUNSET BOULEVARD CC15
MICHIGAN AVENUE CC14
COTTO CONTEMPO ™
GLAZED PORCELAIN with REVEAL IMAGING ™
SIZES
RESIDENTIAL USAGE
SQ.FT.
CARTON
PCS. PER
CARTON
FLOORS
WALLS
COUNTERTOPS
EXTERIOR
PATIOS
EXTERIOR
POOL DECKS
F
W
C
EP
ED
12 x 24 Field Tile
11-13/16" x 23-5/8"
(30.00 cm x 60.00 cm)
11.58
6
20 x 20 Field Tile
19-11/16" x 19-11/16"
(59.44 cm x 59.44 cm)
16.14
6
13 x 13 Field Tile
13-1/8" x 13-1/8"
(29.56 cm x 29.56 cm)
17.85
15
6-1/2 x 6-1/2 Field Tile
6-9/16" x 6-9/16"
(16.70 cm x 16.70 cm)
10.80
36
Suitable for exterior floors and walls in freezing and non-freezing climates when proper
installation methods are followed.
COMMERCIAL USAGE
INTERIOR
EXTERIOR
LIGHT
RESIDENTIAL COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
TRIM
Floors/Patios
NUMBER
SIZE
PCS. PER
CARTON
Bullnose
P-43E9
3 x 13
30
Cove Base
P-36E9T
6 x 13
22
PC-36E9T
1x6
15
TYPE
Cove Corner
Floor bullnose and cove base trim are intended to coordinate with floor field tile in the
normal 90-degree installation position.
Walls/Backsplashes
Countertops
Pool Decking
Pool Linings
Suitable for exterior applications in freezing and non-freezing climates when proper
installation methods are followed.
TEST RESULTS
SHADE VARIATION
HIGH (V3)
Some variation within each tile, and from tile to tile
INSTALLATION
ASTM#
RESULT
C373
< 0.5%
Breaking Strength
C648
> 400 lbs
Scratch Hardness
MOHS
8.0
Chemical Resistance
C650
Resistant
Water Absorption
Dynamic C.O.F.
THICKNESS
GROUT JOINT RECOMMENDATION
5/16" (13 x 13,
6-1/2 x 6-1/2, trim)
3/8" (20 x 20, 12 x 24)
3/16" when rectangular sizes are used
in a staggered brick-joint pattern.
Overlap should not exceed 33%, as well as when
multiple sizes are installed in a modular pattern.
Abrasion Resistance
A137.1
Wet ≥ 0.42
C1027
4 (CC12 only)
3 (CC13 - CC15)
A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial application
in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥ 0.60 referenced
in ASTM C1028. For more information on the correlation between the two values and
about the DCOF AcuTest™, please visit http://daltile.com/information/DCOF.
NOTES
Special consideration needs to be given when installing tiles 20” and larger. Please refer
to http://daltile.com/LargeTiles for more information.
Since there are variations in all fired ceramic products, tile and trim supplied for your
particular installation may not match these samples. Final color selection should be
made from actual tiles and trim and not from tile samples or color reproductions.
Manufactured in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to
these conditions require extra caution in product selection. Not for use on ramps.
For additional information refer to “Factors to Consider” at daltile.com/Factors.
All or selected items within this series are made in the USA. For more information,
visit www.daltile.com/CottoContempo.
By their very design, Daltile products can help make it easier for you to earn LEED™ points
and/or points towards many industry leading green home building programs. From using
recycled material content to establishing manufacturing facilities within 500 miles of your
project, we help ensure you don’t have to compromise your design to be environmentally
conscious. For detailed information, visit daltilegreenworks.com.
7834 C. F. Hawn Freeway | Dallas, Texas 75217 | 800.933.TILE
For more information about Daltile products and services, visit our website at DALTILE.COM.
© 2014 Dal-Tile Corporation (10/14)