MAXxess Integration Control Center Cameras

Control Center
Cameras
Other System
MAXxess
Controller
Integration
Recording
Integration Module
&
MAXxess Server
MAXxess
Integration
The IndigoVision MAXxess Integration Module
allows events and alarms from MAXxess systems
to be forwarded into IndigoVision IP Video and Alarm
Management systems. This creates a tightly integrated
access control and CCTV monitoring system.
With the IndigoVision Integration Module, any MAXxess
events can trigger a wide range of actions within the
IndigoVision system. This includes starting recordings
on an IndigoVision Network Video Recorder, displaying
live video from cameras on monitors and IndigoVision
Control Center viewing panes, moving PTZ cameras
to specific locations or sending notification emails. All
events, received by the integration module, appear
within the IndigoVision Alarm Log and can, for example,
be viewed when playing back recordings in Control
Center.
The IndigoVision Integration Module is installed on
the same machine as the MAXxess AXxess Control
Software. Powerful and flexible configuration is carried
out through a simple text file.
In conjunction with the MAXxess AXxess Control Server,
the IndigoVision Integration Module integrates with and
is compatible with the following MAXxess applications
and hardware:
AXxess NS
eAXxess
eFusion
Specification & Requirements
MAXxess System Software
Requirements:
AXxess NS v4.4 or
eAXxess v4.4 or
eFusion v6.0.1
IndigoVision System
Software Requirements:
IndigoVision MAXxess Integration Module v1.0.0
Compatible with SMS4TM r2/Control Center v11.0 or later
Integration Server
Specification:
PC requirements for MAXxess AXxess vary depending on the size of the access control system
and the database software being used. Refer to MAXxess documentation for advice on machine
specifications.
The IndigoVision MAXxess AXxess Integration Module runs on the same PC as MAXxess AXxess.
There are no extra requirements on the specification of the PC due to the IndigoVision software.
NOTE:The Integration Module is a licenced product. A correctly licenced USB dongle should be
present on the platform running the Integration Module.
The Integration Module should not be run on the same server as any other dongle licenced
IndigoVision software such as either of the Windows NVR-AS’s.
Supported Operating
Systems for the Integration
Module are:
Windows 7 64-bit
Windows Server 2008 R2
MAXxess AXxess Events
and IndigoVision
Actions Supported:
The IndigoVision MAXxess Integration Module is written in a general way so that it can easily be
configured to recognise any MAXxess AXxess events.
Examples of MAXxess AXxess events supported
are:
Cardholder Access Events
Normal Entry
Fault and Tamper
Burglar Alarm
Holdup/Duress Alarm
Intruder Zone Events
Fire Zone Events
Vibration Zone Events
Personal Attack Zone Events
Time Zone Events
Any of the above events or systems can trigger any
of the following actions within the IndigoVision IP
Video system:
PTZ Camera moves to Preset
Video from one or more cameras displayed on
operator’s PC
Notification email sent
Video from any camera displayed on an analog
monitor
Recording of any camera started
CCTV site map pops up with event source
highlighted
Two way audio connection established so
operator can listen and talk to the source of the
event
Relay triggered action initiated e.g. door opens
or lights turn on
ID: IV-MAXx
14.1 NOV 14