PI4MSD5V9545A/B/C Product Databrief NEW PRODUCT

Transcription

PI4MSD5V9545A/B/C Product Databrief NEW PRODUCT
NEW PRODUCT BRIEF
Product Databrief
PI4MSD5V9545A/B/C
SWITCHING SOLUTIONS
4 Channel I2C/SMBus Switch with Interrupt Logic and Reset
The PI4MSD5V9545A is a quad 1-of-4 bidirectional
translating switch, controlled via the I 2 C /SMBus.
The SCL/SDA upstream pair fans out to four SCx/SDx
downstream pairs, or channels.
Any individual SCx/SDx channel or combination of
channels can be selected, determined by the contents of
the programmable control register. Four interrupt inputs,
INT0 to INT3, one for each of the downstream pairs, are
provided. One interrupt output, INT, acts as an AND of the
four interrupt inputs.
An active LOW reset input allows the PI4MSD5V9545A/45B/45C to recover from a situation where one of
the downstream buses is stuck in a LOW state. Pulling the
RESET pin LOW resets the I2C/SMBus state machine and
causes all the channels to be deselected as does the internal
power-on reset function.
The pass gates of the switches are constructed such that
the VCC pin can be used to limit the maximum high voltage
which will be passed by the PI4MSD5V9545A/45B/45C.
This allows the use of different bus voltages on each pair, so
that 1.2V, 1.8V or 2.5V or 3.3V parts can communicate with
5V parts without any additional protection. External pull-up
resistors pull the bus up to the desired voltage level for each
channel. All I/O pins are 5V tolerant.
T h e P I 4 M S D 5 V 95 4 5 A , P I 4 M S D 5 V 95 4 5 B a n d
PI4MSD5V9545C are identical except for the fixed portion
of the slave address.
Block Diagram
Features
ÎÎ1-of-4
bidirectional translating multiplexer
2
ÎÎI
C-bus interface logic; compatible with SMBus
standards
ÎÎOperating
to 5.5V
power supply voltage range of 1.65V
ÎÎAllows
voltage level translation between 1.2V, 1.8V,
2.5V, 3.3V and 5V buses
ÎÎLow
standby current
ÎÎLow
Ron switches
ÎÎChannel
selection via I2C-bus
ÎÎPower-up
ÎÎNo
glitch on power-up
ÎÎSupports
ÎÎ5V
ÎÎ0
with all multiplexer channels deselected
hot insertion
tolerant inputs
Hz to 400 kHz clock frequency
ÎÎESD
protection exceeds 2000V HBM per
JESD22-A114, and 1000V CDM per JESD22-C101
ÎÎLatch-up
testing is done to JEDEC Standard JESD78
which exceeds 100 mA
ÎÎPackages
offered: SOIC (S20), TSSOP (L20)
PI4MSD5V9545A/45B/45C
SC0
SC1
SC2
SC3
SD0
SD1
SD2
SD3
GND
VCC
RESET
SCL
SDA
INT[3:0]
Switch Logic Logic
Power-on
Reset
Input
Filter
I2C Bus
Control
A0
A1
A2
Interrupt Logic
INT
www.pericom.com | 1-408-232-9100