FTT X & SlimBox

FTTX
Supporting Multiple
Dwelling Unit (MDU)
and In-Home Wiring
Applications
A Furukawa Company
SlimBox™ Customer Splice Point
(CSP) Module
& External
Internal
The SlimBox™ Customer Splice
Point (CSP) Module is an excellent choice as an internal or external demarcation closure, featuring
dual functionality as either a splice
or connector housing.
Designed to resemble other typical wall outlets in a home, it is
small and inconspicuous enough
to satisfy the most discriminating
homeowner, while protecting the
valuable network splice sleeves or connectors inside. The version for indoor
Internal SlimBox CSP Module
applications is a neutral white color,
while the external version is gray. The
SlimBox CSP Module can be used for a wide variety of applications including
Fiber-to-the-Home (FTTH) and Fiber-to-the-Business (FTTB) applications.
When used in conjunction with indoor Optical Network Terminals (ONT) and
the wall-hugging capabilities of OFS EZ-Bend® Optical Cable, the SlimBox
CSP Module enables the network operator to provide a very clean, professional-looking installation at a very attractive price point. The SlimBox CSP
Module can also be used as a simple, low priced fiber distribution box to
distribute to multiple apartments or businesses for Multiple-Dwelling Unit
(MDU) or retail shopping plaza applications.
Versions are available for either primary indoor or primary outdoor use, and
can accommodate most common fiber optic drop cable sizes including 900
micron, 3.0 mm, 4.8 mm, and flat drop cables. The outdoor version features
a sealed cover. A separate splice tray will hold up to four splice sleeves
(40 mm sleeves only), and either version accommodates up to 4 SC-APC
connectors.
Features and Benefits:
www.ofsoptics.com
• Common installation methods and procedures for both indoor and
outdoor versions
• Small and inconspicuous footprint (Versions as small as 6.5” (16.51
cm) length x 3.9” (9.91 cm) height x 1.18” (2.98 cm) depth)
• Large space for slack storage
• Tamper-resistant
Key Component of
• Splice protectors, plastic ties, and
screws for typical wall-attachment
included
Fiber Optics to the X
Ordering Information:
SlimBox CSP Module
Description
SlimBox-H, Indoor CSP-4 Fiber
SlimBox-H, Outdoor CSP-4 Fiber
SlimBox-H, Outdoor CSP-2 Fiber Inside Adapter
WSE4S-002-SBC0-GRY-SCAUNC-F
SlimBox-H, Outdoor CSP-2F-SM-SCA-PT
SlimBox-H, Outdoor CSP-2F-SM-SCU-PT
Part Number
301040556
301040564
301099362
301098968
301079786
301079794
Accessories
C6060A-4 Duplex Single Mode SC adapter
106817380
C6868A-4 Duplex APC (green) SC adapter
108223199
EZ-Bend Indoor SCA to SCA patch cord 3 meters in length
JR4DW001SCASCA003M
EZ-Bend Indoor/Outdoor SCA to SCA patch cord 3 meters in length JI4DK001SCASCA003M
SlimBox, External Capping 25A
301102307
SlimBox, External Duct Cover 4
301102315
Internal SlimBox CSP Module Opened
Use electronic files, available at:
www.ofsoptics.com - Use less paper
EZ-Bend is a registered trademark and FOX Solution and SlimBox are
trademarks of OFS FITEL, LLC.
For additional information, please contact your sales representative.
You can also visit our website at www.ofsoptics.com or call 1-888-fiberhelp (1-888-342-3743) from inside the USA or 1-770-798-5555 from
outside the USA.
OFS reserves the right to make changes to the prices and product(s)
described in this document at any time without notice. This document is
for informational purposes only and is not intended to modify or supplement any OFS warranties or specifications relating to any of its products or
services.
Copyright © 2014 OFS Fitel, LLC.
All rights reserved.
OFS
Marketing Communications
fap-260-A4-1114
A Furukawa Company