M67PAR38-9AD-RL shown Museum Collection PAR-38

Museum Collection
BY LITELAB
Cylinder | Stem Mount
LED Replacement | Object-light
PAR-38
job name:
Specify:
example:
M67PAR38-9AD shown in Deep BusRun
Features & Benefits
fixture type:
M67PAR38
FIXTURE MODEL
ADAPTER
M67PAR38
-9 i D-RL
VOLTAGE
-A
FINISH
ACCESSORIES (optional)
-NT
Museum Collection Fixtures
Lamp
Ratings
• Fits shallow 1.81” (46mm) and deep 2.38”
(60mm) BusRun.
• Fixture rotates up to 360° and may be ordered
with an on/off switch. Includes standard tilt &
rotation locks.
• Accessory cartridge/baffle is designed to
rotate and lock, maintaining proper orientation
of all accessories.
• Accessory cartridge design and perforated back
allow for efficient heat dissipation.
Refer to Litelab.com
for tested lamps.
20 watts maximum
M67PAR38-9AD-RL shown
C
®
4.63” [120]
Flush Fit adapter with Rotation Lock *
Adapter plugs into Busway with separate electrical
and mechanical connections. Electrical contacts are
oversized for a long life and each fixture is fused.
Adapter equipped with thumb wheel horizontal
rotation lock.
1.38” [35]
Vented Back
360°
Stem
Durable aluminum stem with a .5" (13mm)OD, features
a constant tension tilt swivel that is mechanically lockable. Aiming angle is 90° maximum.
Accessory
Rotation Lock
Lamp Housing
Durable aluminum housing contains a lockable a
cessory cartridge holder. A push-button located at
the rear of the housing unlocks cartridge for rotation or removal.
Thermal
Management
Lenses & Accessories*
11.0” [279]
Standard clear lenses are available in a 55° x 75°,
5° x 30° or 5° x 55° optical pattern. All lenses are
keyed for lockable orientation. Photo etched light
blocking screens also available.
8.81” [224]
Accessory Size Code: p
Accessory Cartridge*
Front installation permits lens rotation adjustment for
proper lens orientation. This optical matte black cartridge provides a built in snoot for no glare 40° cutoff
and comes equipped with cross hair baffle.Holds up
to two lenses and a complete set of light blocking
screens.
LED Lamp
(by others)
Matte Black
Vented
Accessory
Holder with
Cross Hair
Baffle
Finishes
Available in a durable powdercoat finish of white or
matte black as well as Litelab’s natural aluminum.
Consult for custom finishes.
5.5” [140]
**See fittings and accessories page for mounting options and accessories.
Litelab Corp. 251 Elm Street Buffalo, NY 14203 USA • 800-238-4120 • F 716-856-0156 • www.litelab.com
© 2014
Museum Collection
Input Fittings & Accessories | PAR38
BY LITELAB
Adapters
adapter
code
BusRun
on-off
switch
rotation
lock
optional
standard
voltage
Canopy (120V, 230V, 277V)
-2
adapter shown
in DEEP
Busway
2.38”
[60]
9AD
-SY
- RL
-A
fused plug-in fitter for use with Deep 120V
BusRun busway
9AD
-SY
- RL
-D
fused plug-in fitter for use with Deep 240V
BusRun busway
9AS
adapter shown
in SHALLOW
Busway
1.81”
[46]
-SY
- RL
-A
fused plug-in fitter for use with Shallow 120V
BusRun busway
BP1-08-09-A
BP1-08-09-D
120V
240V
BP1-08-18-A
BP1-08-18-D
120V
240V
4.18”
[107]
8.63”
[219]
18”
[457]
4.18”
[107]
Fitter Detail
Check with LED lamp manufacturer for specific
lumen/input requirements.
Accessories
Optional
Switch
(SY)
Standard
Rotation
Lock
(RL)
Finishes
Spread Lenses
Screens
Linear Spread*
OL- 5° x 30°-p
OL- 5° x 55°-p
Light Block Screen
B-15N/p
Beam Softener
OL-SF-p
.63”
[16]
BusPoints
9AS
-SY
- RL
-D
fused plug-in fitter for use with Shallow 240V
BusRun busway
Input Requirements
Universal Spread
OL- 55° x 75°-p
5ӯ
[127]
painted spun steel canopy,
5.88” diameter x .63” height
Consult with Litelab for
custom finishes.
Photo-etched, 15% lightblocking screen. Accepts
up to 5 for 30%, 45%, 60%
or 75% (maximum)
NT
Brushed Aluminum
MB
Black
P
White
CP
Custom Paint
Note: Some LED
manufacturers
do not recommend
the use of lenses in
front of their lamps.
See manufacturer
for details.
Litelab Corp. 251 Elm Street Buffalo, NY 14203 USA • 800-238-4120 • F 716-856-0156 • www.litelab.com
© 2014