Vacuum generators VADM/VADMI

Transcription

Vacuum generators VADM/VADMI
Vacuum generators VADM/VADMI
Vacuum generators
Key features
Product overview
Vacuum
generator
All Festo vacuum generators have a
single-stage design and operate
according to the venturi principle.
The product families described below
have been designed for a wide range
of applications. The different
performance classes of the individual
Standard and inline ejectors
VN-…
• Nominal size
0.45 … 3 mm
• Max. vacuum
93%
• Temperature range
0 … +60 °C
Technical data Internet: vn
• A range of extremely effective
generators suitable for use directly
in the workplace
• Available as straight or T-shaped
housing
• Low space requirement
•
•
•
•
Low-cost
No wearing parts
Extremely fast evacuation time
Vacuum switch (optional)
2
• Optional with additional functions:
– integrated eject pulse
– electric control for vacuum
ON/OFF
– combination of eject pulse and
control
Technical data Internet: vad
VAD-…/VAK-…
• Nominal size
0.5 … 1.5 mm
• Max. vacuum
80%
• Temperature range
–20 …+80 °C
product families make it possible to
select vacuum generators tailored to
suit specific requirements.
• Range of vacuum generators with
sturdy aluminium casing
• VAK-…: Built-in reservoir
VAD-…: Connection for additional
external reservoir
Internet: www.festo.com/catalog/...
• Maintenance-free
• VAK-…: Reliable setting down of
workpieces
Subject to change – 2012/06
Vacuum generators
Key features
Compact ejectors
VADM-…/VADMI-…
• Nominal size
0.45 … 3 mm
• Max. vacuum
84%
• Temperature range
0 … +60 °C
8
•
•
•
•
•
Compact design
Minimal installation work required
Short response times
Built-in solenoid valve (on/off)
VADMI-…: Additional built-in
solenoid valve for ejector pulse
• Filter with display
• Air-saving circuit (optional)
• Vacuum switch (optional)
• Reliable setting down of workpieces
Technical data Internet: vad-m
VAD-M-…/VAD-M…-I-…
• Nominal size
0.7 … 2 mm
• Max. vacuum
85%
• Temperature range
0 … +40 °C
2012/06 – Subject to change
•
•
•
•
Compact design
Minimal installation work required
Short response times
Built-in solenoid valve (on/off)
• VAD-M-I-…: Additional built-in
solenoid valve for ejector pulse
• Reliable setting down of workpieces
Internet: www.festo.com/catalog/...
3
Vacuum generators VADM/VADMI
Features
At a glance
• Compact and sturdy design
• Components with numerous
individual functions form a single
unit
• Extremely short switching times
thanks to integrated solenoid
valves
• No external or additional
components required
• Easily fitted thanks to compact
dimensions and therefore
particularly suitable for handling
operations
• Cost effective assembly as the
solenoid valve, vacuum generator
and silencer are all in a single unit.
• Protection class IP65
• With manual override
• With integrated silencer for
reducing exhaust noise
• With integrated filter for the air to
be evacuated and a display window
which shows the degree of filter
contamination
• Built-in solenoid valve for:
– Vacuum ON/OFF
VADM-…
• With or without integrated vacuum
switch to monitor the vacuum with
PNP or NPN output
• With 2 vacuum ports, optional
Vacuum generator VADM-…/-…-P/-N
The compressed air supply of these
vacuum generators is controlled by
the built-in solenoid valve.
When the electrical power supply is
switched on, the valve is actuated and
the flow of compressed air from 1 (P)
to 3 (R) generates a vacuum at port 2
(V), operating on the ejector principle.
Suction stops when the supply power
to the valve is switched off.
The integrated silencer reduces
exhaust noise to a minimum.
With the vacuum generators
VADM-...-P/N the vacuum can be
monitored by means of a vacuum
switch.
VADM-…-P/-N
with vacuum switch
1 = Pressure supply port
2 = Vacuum port
Vacuum generator VADMI-…/-…-P/-…-N with ejector pulse and vacuum switch
Compressed air enters the vacuum
generator following the application of
a voltage signal to the integrated
solenoid valve, thereby creating a
vacuum.
Once the voltage is switched off at the
vacuum valve and switched on at the
ejector valve, the vacuum is rapidly
purged at port 2 as a result of the
application of pressure.
The integrated silencer reduces
exhaust noise to a minimum.
• Two built-in solenoid valves for:
– Vacuum ON/OFF
– Ejector pulse
• With sensing interface
• With integrated non-return valve as
safety function
With the vacuum generators
VADMI-…-P/-N the vacuum can be
monitored by means of a vacuum
switch.
VADMI-…
with ejector pulse
VADMI-…-P/-N
with ejector pulse and
vacuum switch
1 = Pressure supply port
2 = Vacuum port
4
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Features
Vacuum generator VADMI-…-LS-P/N with ejector pulse, vacuum switch and air-saving circuit
This vacuum generator is identically
constructed to the other VADMI types.
In addition, however, this ejector has
a built-in vacuum switch with
air-saving circuit:
If the vacuum level falls below the
required range, vacuum generation is
activated automatically (operating
principle of vacuum switch for
VADMI-…-LS-P/N 13).
2012/06 – Subject to change
• Solenoid valve for vacuum
generation
• Integrated silencer
• Integrated 40 μm filter with
contamination indication
• With sensing interface for vacuum
fault signal
• With integrated non-return valve as
safety function
• With vacuum switch for pressure
monitoring
• With 2 vacuum ports
VADM-…-LS-P/N
with air-saving circuit
PNP output
1 = Pressure supply port
2 = Vacuum port
Internet: www.festo.com/catalog/...
5
Vacuum generators VADM/VADMI
Peripherals overview
VADM/VADMI-45/70
VADM/VADMI-95/140/200/300
4
6
5
8
1
7
1
3
3
2
2
1
1
Mounting attachments and accessories
VADM/VADMI-45/70
1
2
3
4
5
6
7
8
–
–
–
6
Push-in fitting
QS
Suction gripper
ESG
Connecting cable
NEBU-M8
Plug socket with cable
KMYZ-2
Plug socket with cable
KMYZ-4
Plug socket with cable
KMEB-2
Plug socket
MSSD-ZBZC
Plug socket
MSSD-E
Suction cup holder
ESH
Suction cup
ESS
Illuminating seal
ME-LD
VADM/VADMI-95/140/200/300
Page/Internet
quick star
esg
nebu-m8
–
–
–
–
–
mssd-e
esh
ess
–
me-ld
Internet: www.festo.com/catalog/...
kmyz-2
kmyz-4
kmeb-2
mssd-zbzc
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Type codes
VADM
—
45
—
LS
—
P
Type
VADM
VADMI
Vacuum generator without ejector pulse
Vacuum generator with ejector pulse
Nominal laval nozzle size [mm]
45
70
95
140
200
300
0.45
0.70
0.95
1.40
2.00
3.00
Functions
LS
With air-saving circuit
Switching type
P
N
PNP design (vacuum switch, output
potential)
NPN design (vacuum switch, output
potential)
N
Possible combinations can be found
in the ordering data.
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
7
Vacuum generators VADM/VADMI
Technical data
Function
VADM-…
Temperature range
–0 … +60 °C
Pressure
1.5 … 8 bar
VADMI-…
General technical data
Nominal size
45
Design
Mounting position
Ejector features
Type of mounting
Pneumatic connection 1/2
Nominal size of laval nozzle
Duty cycle
Power consumption
Protection class
Slim rectangular
Any
High vacuum
Either: Via female thread, via through-holes
M5/M5
M5/Gx
Gx/Gx
0.45
0.7
0.95
100
1.4
1.5 piloted
IP65
[mm]
[%]
[W]
70
95
140
200
300
Gx/G¼
1.4
G¼/Gy
2.0
G¼/Gy
3.0
140
200
300
Note: This product conforms to ISO 1179-1 and ISO 228-1
Ambient conditions
Nominal size
45
Operating pressure
[bar]
Operating medium
Note on operating/pilot medium
Ambient temperature
[°C]
Note on material
Authorisation
1.5 … 8
2…8
Compressed air in accordance with ISO 8573-1:2010 [7:4:4]
Operation with lubricated medium not possible
–0 … +60
Free of copper, PTFE and silicone
c UL us - Recognized (OL)
Weights [g]
Nominal size
45
70
95
140
200
300
VADM-…
VADM-…-P/-N
VADMI-…
VADMI-…-P/-N/-LS-P
60
65
85
90
140
145
170
180
210
220
240
250
290
300
320
330
320
330
350
360
340
350
370
380
8
70
Internet: www.festo.com/catalog/...
95
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Δpu [bar]
Vacuum Δpu as a function of operating pressure p
p [bar]
t [s]
t [s]
Evacuation time t [s] for 1 litre volume at 6 bar operating pressure
Δpu [bar]
t [s]
Δpu [bar]
Δpu [bar]
Air supply time for 1 litre volume at 6 bar operating pressure1)
Type
With ejector pulse
[s]
Without ejector pulse
[s]
Max. flow rate
[l/min]
VADM-45-…
VADMI-45-…
VADM-70-…
VADMI-70-…
VADM-95-…
VADMI-95-…
VADM-140-…
VADMI-140-…
VADM-200-…
VADMI-200-…
VADM-300-…
VADMI-300-…
5.9
–
2.2
–
1.18
–
0.69
–
0.29
–
0.26
–
–
21
–
48
–
104
–
265
–
260
–
250
1)
–
1.9
–
0.59
–
0.24
–
0.19
–
0.15
–
0.2
Time required to build up vacuum from –0.75 to –0.05 bar.
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
9
Vacuum generators VADM/VADMI
Technical data
Q [l/min]
Q [l/min]
Air consumption Q as a function of operating pressure p
p [bar]
p [bar]
Lp [dB(A)]
Noise level Lp as a function of operating pressure p (without suction flow)
p [bar]
η
Efficiency η as a function of vacuum Δpu at Pnom 6 bar
Δpu [bar]
qn [l/min]
Suction rate qn as a function of vacuum Δpu
Δpu [bar]
10
1 VADM-45
VADMI-45
2 VADM-70
VADMI-70
3 VADM-95
VADMI-95
4 VADM-140
VADMI-140
5 VADM-200
VADMI-200
6 VADM-300
VADMI-300
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Vacuum switch for vacuum generators
VADM…-…-P/N
Circuit diagram
• Piezo-resistive vacuum switch with
adjustable switching point and
adjustable hysteresis
• Switching status display, yellow LED
• Electrical connection, polarity safe
General technical data
Pneumatic data
Max. operating pressure
Switching point
Hysteresis
Temperature influence
Electrical data
Operating voltage
Voltage drop
Switch output current
Max. intrinsic current
consumption
Max. switching delay
Connection
[bar]
[bar]
[bar]
0 … –0.95
0 … –0.9 (adjustable)
0.05 … 0.5 (adjustable)
≤ ±5 mbar/10K (on switching point)
[V DC]
[V]
[mA]
[mA]
24 (15 … 30)
1.2 (at switch output)
130
25
[ms]
5
Reverse polarity protected
Mechanical data
Design
Piezo-resistive vacuum switch with adjustable switching point and hysteresis
Ambient conditions
Protection class
IP65
Ambient conditions
Ambient temperature
Note on material
CE marking symbol
(see conformity declaration)
Authorisation
[°C]
–0 … +60
Free of copper, PTFE and silicone
As per EU EMC directive
c UL us - Recognized (OL)
C-Tick
Vacuum switch control panel
1 Switching status display, yellow
LED
2 Switching point adjustment
3 Hysteresis adjustment
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
11
Vacuum generators VADM/VADMI
Technical data
Terminal allocation
NPN output
PNP output
BN
WH
BK
BU
RL
= Brown
= White
= Black
= Blue
= Load
Pin allocation
1
2
3
4
Brown:
White:
Blue:
Black:
Positive terminal
NC contact
Negative terminal
NO contact
Energy-saving function with VADMI-…-P/N
The conventional vacuum switch A cost-effective energy-saving measure
With the vacuum generators VADMI a
maximum value is first set and then
the hysteresis is regulated (reliable
operating range). The lower limit
defines the minimum value.
Once the vacuum level is within this
range, reliable workpiece transport is
guaranteed.
The vacuum generator VADMI is only
activated by the external controller if
the level drops below the minimum
value and is deactivated again once
that minimum value is regained.
A non-return valve prevents the
vacuum level from being purged
during the inactive phase of vacuum
generation.
[%]
Hysteresis
The functional sequence
max.
min.
Optimum vacuum curve
Actual vacuum curve
RP
RP Ejector pulse
VG Vacuum on/off
E Vacuum generator
12
VG
D
A
Non-return valve
Vacuum switch
Internet: www.festo.com/catalog/...
Vacuum on
1 External controller F switches on the VG solenoid
Valve for compressed air supply B is opened
Vacuum generation E is activated
Vacuum stop
2 The specified maximum level is achieved:
Pressure sensor A sends a signal to the external controller
Controller switches the VG solenoid off
Vacuum generation is interrupted
Non-return valve D prevents the vacuum level from being purged
Vacuum on
3 Leakage causes the vacuum level to drop to the minimum value
Pressure sensor A sends a signal to the external controller F
Controller F switches the VG solenoid B back on
Vacuum generation E is active again
Constant repetition of points 2 and 3
Cycle ended: Vacuum off
4 Transport process ended
External controller (PLC) F deactivates VG solenoid B
Vacuum generation E is ended
External controller switches on ejector RP solenoid C
Vacuum level at 0
Workpiece is released
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Vacuum switch and cable set for
vacuum generators with air-saving
circuit VADMI-…-LS-P/N
Circuit diagram
• Piezo-resistive vacuum switch with
adjustable switching point and
adjustable hysteresis
• Air-saving circuit only in
conjunction with supplied cable
• Switching status display, yellow LED
• Electrical connection, polarity safe
General technical data
Pneumatic data
Max. operating pressure
Max. overload pressure
Switching point
Hysteresis
Temperature influence
Electrical data
Operating voltage
Voltage drop
Switch output current
Max. intrinsic current
consumption
Max. switching delay
Connection
[bar]
[bar]
[bar]
[bar]
0…1
5 (for t <1 min)
0 … –0.9 (adjustable)
0.1 … 0.6 (adjustable)
≤ ±10 mbar/10K (on switching point)
[V DC]
[V]
[mA]
[mA]
24 V (±10%, at VADMI-70-LS-P +10%–5%)
1.2 (at switch output)
130
25
[ms]
2 (with NPN cable distribution: 20 ms)
Reverse polarity protected
Mechanical data
Design
Piezo-resistive vacuum switch with integrated air-saving circuit
Ambient conditions
Protection class
IP65
Ambient conditions
Ambient temperature
Note on material
CE marking symbol
(see conformity declaration)
Authorisation
2012/06 – Subject to change
[°C]
–0 … +60
Free of copper, PTFE and silicone
As per EU EMC directive
c UL us - Recognized (OL)
C-Tick
Internet: www.festo.com/catalog/...
13
Vacuum generators VADM/VADMI
Technical data
Function principle
In conjunction with the supplied cable
set, the vacuum generator
VADMI-…-LS-P/N contains an
air-saving circuit. The vacuum range
to be used to hold the workpiece is set
on the switch using both
potentiometers.
The switch generates a pulsating
signal A2 which only actuates the
solenoid for vacuum ON/OFF in the
vacuum generator when the vacuum
pressure has fallen below the selected
upper limit value due to leakage etc.
At all other times, the vacuum is
maintained with the help of the
non-return valve, even when the
vacuum generator is not switched on.
In addition to this, status signal A1
can be interrogated which is
connected to +24 V during normal
operation, but which is switched to 0
whenever vacuum pressure falls
below the critical value by 150 mbar
due to a malfunction.
This is the case, for example, if the
workpiece has dropped off from the
suction cup and it is no longer
possible to generate the selected
vacuum.
Accessories (included in scope of
delivery):
• Connecting cable
The switch may only be operated
with the included cable set.
Connections 1, 2 and 4 can
nevertheless be interchanged with
one another without damaging the
device.
Vacuum switch control panel
1 Switching status display, yellow
LED
2 Switching point adjustment
3 Hysteresis adjustment
Terminal allocation
PNP output
NPN output
BN
WH
BK
BU
RL
= Brown
= White
= Black
= Blue
= Load
Pin allocation
1
2
3
4
Brown:
White:
Blue:
Black:
Positive terminal
NC contact
Negative terminal
NO contact
Switching points/hysteresis
Signal A1, “suction process”
Signal A2, “solenoid P ON”
Signal “pick up workpiece”
0 bar
150 mbar
Hysteresis
Hysteresis
Switching point 1
Switching point 2
Normal operation
Acknowledgement to controller:
Suction process OK
14
Error, e.g. workpiece has dropped off
Acknowledgement to controller:
Suction process not OK
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Energy-saving function and error reporting with VADMI-…-LS-P/N
The further development of the vacuum switch
In addition to the described functions,
error reporting is also used as an
additional energy-saving measure.
This like the vacuum circuit is
controlled via the vacuum switch.
If a suction cup does not pick up a
workpiece properly or a tube bursts,
the vacuum switch can report such an
event to the external control unit (PLC)
F so that this or the user can take the
necessary steps.
Given the decentrally controlled
switching function, external actuation
of the vacuum circuit (air-saving
circuit) would be superfluous. As a
result there is significantly less wiring.
The functional sequence
BN
Control signal: Vacuum
on/off
BK
Hysteresis
Report signal: Suction process
OK/not OK
Vacuum curve
Vacuum generator
active/inactive
Optimum vacuum curve
Actual vacuum curve
Curve after fault
RP
VG
Branching
RP
VG
E
D
Ejector pulse
Vacuum on/off
Vacuum generator
Non-return valve
2012/06 – Subject to change
C
G
A
Start signal
1 External controller F activates the pressure sensor
Pressure sensor A checks the vacuum status
No vacuum present
Vacuum on
2 Pressure sensor activates the VG solenoid B
Valve for compressed air supply is opened
Vacuum generation E is activated
3 Vacuum level 150 mbar below the maximum level is exceeded
Pressure sensor sends an enable signal to external controller (PLC) F BK
Transport process can start
Vacuum stop
4 The specified maximum level is achieved
Pressure sensor A switches the VG solenoid off
Compressed air supply stopped
Vacuum generation E interrupted
Non-return valve D prevents the vacuum level from being purged
Vacuum on
5 Leakage causes the vacuum level to drop to the minimum value
Pressure sensor A switches the VG solenoid on again
Vacuum generation E is active again
Fault: Transport stopped
6 Major leakage causes an overly large drop in the vacuum level
Vacuum generator E cannot compensate for the drop in level
7 Vacuum level is 150 mbar below the minimum value
Pressure sensor A sends an error message to the external controller (PLC)
F BK
External controller interrupts the transport process
Vacuum generation E is ended
Cycle ended: Vacuum off
8 Transport process ended
External controller (PLC) F deactivates VG solenoid
Vacuum generation E is ended
External controller F switches on ejector RP solenoid C WH
Ejector pulse activated
Workpiece is released
Ejector pulse
Branching
Vacuum switch
Internet: www.festo.com/catalog/...
15
Vacuum generators VADM/VADMI
Technical data
Connection to PLC
PNP and NPN switching of the
VADMI-…-LS-P/N
The three control and supply cable
harnesses are combined in a
branching directly via the vacuum
generator so that only one cable
containing one signal wire and three
VADMI-…
PLC
voltage supply wires need to be
conducted from the branching to the
PLC.
In principle there are two different
signal characteristics with external
control units (PLC) for the vacuum
generator VADMI-LS, which differ only
slightly in their mode of operation. As
both versions are identical in terms of
the vacuum generator and the vacuum
switch, the signal flow is only
converted in the branching,
as this is the only difference between
the models.
VADMI-…-P/N
VADMI-…-P/N-LS
PLC
VADMI
without vacuum circuit
VADMI
with vacuum switching
The labelled plug-in connectors for the
wiring harness are connected to the
relevant elements of the VADMI-LS.
The four-wire cable splice of the
branching is connected to the control
unit in the manner depicted below.
PLC
VADMI
with air-saving circuit
four-wire cable splice
PNP circuit
NPN circuit
Sensor
VG
RP
Sensor
VG
RP
Wiring harness
to VADMI
Branching
BN = Brown for vacuum generation
VG
WH = White for ejector pulse RP
16
PLC
(customer-side)
Wiring harness
to VADMI
Branching
PLC
(customer-side)
BK = Black for consumer RL (PLC)
BU = Blue for ground
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Dimensions
VADM-45/-70
1
2
3
4
5
6
VADM-95/-140/-200/-300
7 Suitable socket for:
VADM-45/-70
KMYZ-…
Internet: kmyz
VADM-95/-…/-300
KMEB-… and MSSD-EB
Internet: kmeb1
Internet: mssd-eb
Compressed air port
Vacuum port
Manual override facility
Mounting thread
Mounting hole
Solenoid coil can
be repositioned by 180°
Type
B1
B2
B3
D1
D2
D3
∅
D4
H1
H2
H3
H4
H5
H6
H7
VADM-45
VADM-70
VADM-95
VADM-140
VADM-200
VADM-300
10
15
18
22
22
22
6.2
11.2
13.4
16.6
16.6
16.6
–
–
18
18
18
18
M5
Gx
Gx
G¼
Gy
Gy
M5
M5
Gx
Gx
G¼
G¼
3.2
3.2
4.2
5.2
5.2
5.2
M2
M2
M2.5
M3
M3
M3
64.4
73.9
93.4
107.4
113.4
113.4
44.4
49.4
63.4
77.4
83.4
83.4
40.8
47
48.9
61.4
67.7
67.7
23.8
26.5
25.5
41.4
41.4
41.4
23.8
23.5
23.3
41.4
41.4
41.4
29.6
32.9
33
36
40
40
18
18
18
17.5
19
19
Type
L1
L2
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
45
62.3
65
88
88
124.4
41
58.3
61
84
84
120.4
33.6
40.4
43.3
26
26
26
25
21
8.7
12.5
12.5
12.5
3.6
14.2
13.2
28.5
28.5
28.5
11
11
9.7
9.7
9.7
9.7
16
22
24.5
24.5
24.5
24.5
41
52.4
61
61
61
61
56
76.1
78.8
96.8
101.8
137.4
7.9
9.4
9.5
13.8
12.5
12.5
1.9
1.9
2.3
2.3
2.3
2.3
36.3
53.7
55
79.4
79.4
115.8
4
4.5
4.5
5
5
5
VADM-45
VADM-70
VADM-95
VADM-140
VADM-200
VADM-300
Note: This product conforms to ISO 1179-1 and ISO 228-1
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
17
Vacuum generators VADM/VADMI
Technical data
Dimensions
VADM-45/-70-P/-N
1
2
3
4
5
6
VADM-95/-140/-200/-300-P/-N
7 Suitable socket for:
VADM-45/-70-P/-N
KMYZ-…
Internet: kmyz
VADM-95/-…/-300-P/-N
KMEB-… and MSSD-EB
Internet: kmeb1
Internet: mssd-eb
Compressed air port
Vacuum port
Manual override facility
Mounting thread
Mounting hole
Solenoid coil can
be repositioned by 180°
8 Connection for connecting
cable NEBU-M8
Internet: nebu-m8
Type
B1
B2
B3
D1
D2
D3
∅
D4
H1
H2
H3
H4
H5
H6
H7
VADM-45-P/-N
VADM-70-P/-N
VADM-95-P/-N
VADM-140-P/-N
VADM-200-P/-N
VADM-300-P/-N
10
15
18
22
22
22
6.2
11.2
13.4
16.6
16.6
16.6
10
15
18
18
18
18
M5
Gx
Gx
G¼
Gy
Gy
M5
M5
Gx
Gx
G¼
G¼
3.2
3.2
4.2
5.2
5.2
5.2
M2
M2
M2.5
M3
M3
M3
64.4
73.9
93.4
107.4
113.4
113.4
44.4
49.4
63.4
77.4
83.4
83.4
40.8
47
48.9
61.4
67.7
67.7
23.8
26.5
25.5
41.4
41.4
41.4
23.8
23.5
23.3
41.4
41.4
41.4
29.6
32.9
33
36
40
40
18
18
18
17.5
19
19
Type
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
71.4
88.7
91.4
114.4
114.4
150.8
41
58.3
61
84
84
120.4
28.4
28.4
28.4
28.4
28.4
28.4
33.6
40.4
43.3
26
26
26
25
21
8.7
12.5
12.5
12.5
3.6
14.2
13.2
28.5
28.5
28.5
11
11
9.7
9.7
9.7
9.7
16
22
24.5
24.5
24.5
24.5
41
52.4
61
61
61
61
56
76.1
78.8
96.8
101.8
137.4
7.9
9.4
9.5
13.8
12.5
12.5
1.9
1.9
2.3
2.3
2.3
2.3
36.3
53.7
55
79.4
79.4
115.8
4
4.5
4.5
5
5
5
VADM-45-P/-N
VADM-70-P/-N
VADM-95-P/-N
VADM-140-P/-N
VADM-200-P/-N
VADM-300-P/-N
Note: This product conforms to ISO 1179-1 and ISO 228-1
18
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Dimensions
VADMI-45/-70
1
2
3
4
5
VADMI-95/-140/-200/-300
7 Suitable socket for:
VADMI-45/-70
KMYZ-…
Internet: kmyz
VADMI-95/-…/-300
KMEB-… and MSSD-EB
Internet: kmeb1
Internet: mssd-eb
Compressed air port
Vacuum port
Manual override facility
Mounting thread
Mounting hole
Type
B1
B2
B3
D1
D2
D3
∅
D4
H1
H2
H3
H4
H5
H6
H7
VADMI-45
VADMI-70
VADMI-95
VADMI-140
VADMI-200
VADMI-300
10
15
18
22
22
22
6.2
11.2
13.4
16.6
16.6
16.6
–
–
18
18
18
18
M5
Gx
Gx
G¼
Gy
Gy
M5
M5
Gx
Gx
G¼
G¼
3.2
3.2
4.2
5.2
5.2
5.2
M2
M2
M2.5
M3
M3
M3
78.2
88.9
99.4
113.4
119.4
119.4
58.2
64.4
69.4
83.4
89.4
89.4
40.8
47
48.9
61.4
67.7
67.7
23.8
26.5
25.5
41.4
41.4
41.4
23.8
23.5
23.3
41.4
41.4
41.4
43.4
48.8
33
36
40
40
18
18
18
17.5
19
19
Type
L1
L2
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
45
62.3
65
88
88
124.4
41
58.3
61
84
84
120.4
33.6
40.4
43.3
26
26
26
25
21
8.7
12.5
12.5
12.5
3.6
14.2
13.2
28.5
28.5
28.5
11
11
5.7
5.7
5.7
5.7
33
45
49.5
49.5
49.5
49.5
55
67
61
61
61
61
56
76.1
78.8
96.8
101.8
137.4
7.9
9.4
9.5
13.8
12.5
12.5
1.9
1.9
2.3
2.3
2.3
2.3
36.3
53.7
55
79.4
79.4
115.8
4
4.5
4.5
5
5
5
VADMI-45
VADMI-70
VADMI-95
VADMI-140
VADMI-200
VADMI-300
Note: This product conforms to ISO 1179-1 and ISO 228-1
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
19
Vacuum generators VADM/VADMI
Technical data
Dimensions
VADMI-45/-70-P/-N/-LS-P
VADMI-95/-140/-200/-300-P/-N/-LS-P
1 Compressed air port
2 Vacuum port
3 Manual override facility
4 Mounting thread
5 Mounting hole
7 Suitable socket for:
VADMI-45/-70 and KMYZ-…
8 Connection for connecting
cable NEBU-M8
Internet: nebu-m8
VADMI-95/-…/-300
KMEB-… and MSSD-EB
Internet: kmeb1
Internet: mssd-eb
Type
B1
B2
B3
D1
D2
D3
∅
D4
H1
H2
H3
H4
H5
H6
H7
VADMI-45-P/-N
VADMI-70-P/-N
VADMI-95-P/-N
VADMI-140-P/-N
VADMI-200-P/-N
VADMI-300-P/-N
10
15
18
22
22
22
6.2
11.2
13.4
16.6
16.6
16.6
10
15
18
18
18
18
M5
Gx
Gx
G¼
Gy
Gy
M5
M5
Gx
Gx
G¼
G¼
3.2
3.2
4.2
5.2
5.2
5.2
M2
M2
M2.5
M3
M3
M3
78.2
88.9
99.4
113.4
119.4
119.4
58.2
64.4
69.4
83.4
89.4
89.4
40.8
47
48.9
61.4
67.7
67.7
23.8
26.5
25.5
41.4
41.4
41.4
23.8
23.5
23.3
41.4
41.4
41.4
43.4
48.8
33
36
40
40
18
18
18
17.5
19
19
VADMI-45-LS-P
VADMI-70-LS-P
VADMI-95-LS-P
VADMI-140-LS-P
VADMI-200-LS-P
VADMI-300-LS-P
10
15
18
22
22
22
6.2
11.2
13.4
16.6
16.6
16.6
10
15
18
18
18
18
M5
Gx
Gx
G¼
Gy
Gy
M5
M5
Gx
Gx
G¼
G¼
3.2
3.2
4.2
5.2
5.2
5.2
M2
M2
M3
M3
M3
M3
78.2
88.9
99.4
113.4
119.4
119.4
58.2
64.4
69.4
83.4
89.4
89.4
40.8
47
48.9
61.4
67.7
67.7
23.8
26.5
25.5
41.4
41.4
41.4
23.8
23.5
23.3
41.4
41.4
41.4
43.4
48.8
33
36
40
40
18
18
18
17.5
19
19
Type
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
VADMI-45-P/-N
VADMI-70-P/-N
VADMI-95-P/-N
VADMI-140-P/-N
VADMI-200-P/-N
VADMI-300-P/-N
71.4
88.7
91.4
114.4
114.4
150.8
41
58.3
61
84
84
120.4
28.4
28.4
28.4
28.4
28.4
28.4
33.6
40.4
43.3
26
26
26
25
21
8.7
12.5
12.5
12.5
3.6
14.2
13.2
28.5
28.5
28.5
11
11
5.7
5.7
5.7
5.7
33
45
49.5
49.5
49.5
49.5
55
67
61
61
61
61
56
76.1
78.8
96.8
101.8
137.4
7.9
9.4
9.5
13.8
12.5
12.5
1.9
1.9
2.3
2.3
2.3
2.3
36.3
53.7
55
79.4
79.4
115.8
4
4.5
4.5
5
5
5
VADMI-45-LS-P1)
VADMI-70-LS-P
VADMI-95-LS-P
VADMI-140-LS-P
VADMI-200-LS-P
VADMI-300-LS-P
71.4
88.7
91.4
114.4
114.4
150.8
41
58.3
61
84
84
120.4
28.4
28.4
28.4
28.4
28.4
28.4
33.6
40.4
43.3
26
26
26
25
21
8.7
12.5
12.5
12.5
3.6
14.2
13.2
28.5
28.5
28.5
11
11
5.7
5.7
5.7
5.7
33
45
49.5
49.5
49.5
49.5
55
67
61
61
61
61
56
76.1
78.8
96.8
101.8
137.4
7.9
9.4
9.5
13.8
12.5
12.5
1.9
1.9
2.3
2.3
2.3
2.3
36.3
53.7
55
79.4
79.4
115.8
4
4.5
4.5
5
5
5
1)
Plug sockets are included in the scope of delivery for type … -LS- ….
Note: This product conforms to ISO 1179-1 and ISO 228-1
20
Internet: www.festo.com/catalog/...
Subject to change – 2012/06
Vacuum generators VADM/VADMI
Technical data
Ordering data
Size
Solenoid coils
Part No.
Type
With vacuum switch
PNP output
Part No.
Type
Without ejector pulse
45
MZB
70
MYB
95
MEB
140
MEB
200
MEB
300
MEB
162 500
162 501
162 502
162 503
162 504
162 505
VADM-45
VADM-70
VADM-95
VADM-140
VADM-200
VADM-300
162 512
162 514
162 516
162 518
162 520
162 522
VADM-45-P
VADM-70-P
VADM-95-P
VADM-140-P
VADM-200-P
VADM-300-P
162 513
162 515
162 517
162 519
162 521
162 523
VADM-45-N
VADM-70-N
VADM-95-N
VADM-140-N
VADM-200-N
VADM-300-N
With ejector pulse
45
70
95
140
200
300
MZB
MYB
MEB
MEB
MEB
MEB
162 506
162 507
162 508
162 509
162 510
162 511
VADMI-45
VADMI-70
VADMI-95
VADMI-140
VADMI-200
VADMI-300
162 524
162 526
162 528
162 530
162 532
162 534
VADMI-45-P
VADMI-70-P
VADMI-95-P
VADMI-140-P
VADMI-200-P
VADMI-300-P
162 525
162 527
162 529
162 531
162 533
162 535
VADMI-45-N
VADMI-70-N
VADMI-95-N
VADMI-140-N
VADMI-200-N
VADMI-300-N
Ordering data
Size
Solenoid coils
With vacuum switch
PNP output
Part No.
Type
NPN output
Part No.
Type
171 053
171 055
171 057
171 059
171 061
171 063
171 054
171 056
171 058
171 060
171 062
171 064
With ejector pulse and air-saving circuit
45
MZB
70
MYB
95
MEB
140
MEB
200
MEB
300
MEB
Without vacuum switch
VADMI-45-LS-P
VADMI-70-LS-P
VADMI-95-LS-P
VADMI-140-LS-P
VADMI-200-LS-P
VADMI-300-LS-P
NPN output
Part No.
Type
VADMI-45-LS-N
VADMI-70-LS-N
VADMI-95-LS-N
VADMI-140-LS-N
VADMI-200-LS-N
VADMI-300-LS-N
Note
With vacuum generators
VADMI-…-LS-P/N , the plug sockets
with cable for solenoid coils and
vacuum switches are included in the
scope of supply.
These vacuum generators may only
be operated with the cable
supplied.
2012/06 – Subject to change
Internet: www.festo.com/catalog/...
21
Product Range and Company Overview
A Complete Suite of Automation Services
Our experienced engineers provide complete support at every stage of your development process, including: conceptualization,
analysis, engineering, design, assembly, documentation, validation, and production.
Custom Automation Components
Complete custom engineered solutions
Custom Control Cabinets
Comprehensive engineering support
and on-site services
Complete Systems
Shipment, stocking and storage services
The Broadest Range of Automation Components
With a comprehensive line of more than 30,000 automation components, Festo is capable of solving the most complex
automation requirements.
Electromechanical
Electromechanical actuators, motors,
controllers & drives
Pneumatics
Pneumatic linear and rotary actuators,
valves, and air supply
PLCs and I/O Devices
PLC's, operator interfaces, sensors
and I/O devices
Supporting Advanced Automation… As No One Else Can!
Festo is a leading global manufacturer of pneumatic and electromechanical systems, components and controls for industrial automation,
with more than 12,000 employees in 56 national headquarters serving more than 180 countries. For more than 80 years, Festo has
continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher performing,
more profitable automated manufacturing and processing equipment. Our dedication to the advancement of automation extends beyond
technology to the education and development of current and future automation and robotics designers with simulation tools, teaching
programs, and on-site services.
Quality Assurance, ISO 9001 and ISO 14001 Certifications
Festo Corporation is committed to supply all Festo products and services that will meet or exceed
our customers’ requirements in product quality, delivery, customer service and satisfaction.
To meet this commitment, we strive to ensure a consistent, integrated, and systematic approach
to management that will meet or exceed the requirements of the ISO 9001 standard for Quality
Management and the ISO 14001 standard for Environmental Management.
© Copyright 2008, Festo Corporation. While every effort is made to ensure that all dimensions and specifications are correct, Festo cannot guarantee that
publications are completely free of any error, in particular typing or printing errors. Accordingly, Festo cannot be held responsible for the same. For Liability and
Warranty conditions, refer to our “Terms and Conditions of Sale”, available from your local Festo office. All rights reserved. No part of this publication may be
reproduced, distributed, or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of
Festo. All technical data subject to change according to technical update.
Printed on recycled paper at New Horizon Graphic, Inc., FSC certified as an environmentally friendly printing plant.
Festo North America
Festo Regional Contact Center
United States
5300 Explorer Drive
Mississauga, Ontario L4W 5G4
Canada
USA Customers:
For ordering assistance,
Call: 1.800.99.FESTO (1.800.993.3786)
Fax: 1.800.96.FESTO (1.800.963.3786)
Email: [email protected]
For technical support,
Call: 1.866.GO.FESTO (1.866.463.3786)
Fax:
1.800.96.FESTO (1.800.963.3786)
Email: [email protected]
USA Headquarters, East: Festo Corp., 395 Moreland Road, Hauppauge, NY 11788
Phone: 1.631.435.0800; Fax: 1.631.435.8026;
Email: [email protected]
www.festo.com/us
Canadian Customers:
Call: 1.877.GO.FESTO (1.877.463.3786)
Fax:
1.877.FX.FESTO (1.877.393.3786)
Email: [email protected]
Canada
USA Headquarters
Festo Corporation
395 Moreland Road
P.O. Box 18023
Hauppauge, NY 11788, USA
www.festo.com/us
USA Sales Offices
Appleton
North 922 Tower View Drive, Suite N
Greenville, WI 54942, USA
Headquarters: Festo Inc., 5300 Explorer Drive, Mississauga, Ontario L4W 5G4
Phone: 1.905.624.9000; Fax: 1.905.624.9001;
Email: [email protected]
www.festo.ca
Boston
120 Presidential Way, Suite 330
Woburn, MA 01801, USA
Mexico
Chicago
1441 East Business Center Drive
Mt. Prospect, IL 60056, USA
Dallas
1825 Lakeway Drive, Suite 600
Lewisville, TX 75057, USA
Detroit – Automotive Engineering Center
2601 Cambridge Court, Suite 320
Auburn Hills, MI 48326, USA
New York
395 Moreland Road
Hauppauge, NY 11788, USA
Silicon Valley
4935 Southfront Road, Suite F
Livermore, CA 94550, USA
Headquarters: Festo Pneumatic, S.A., Av. Ceylán 3, Col. Tequesquinahuac,
54020 Tlalnepantla, Edo. de México
Phone:011 52 [55] 53 21 66 00; Fax: 011 52 [55] 53 21 66 65;
Email: [email protected]
www.festo.com/mx
Central USA
Western USA
Festo Corporation
1441 East Business
Center Drive
Mt. Prospect, IL 60056, USA
Phone:1.847.759.2600
Fax: 1.847.768.9480
Festo Corporation
4935 Southfront Road,
Suite F
Livermore, CA 94550, USA
Phone: 1.925.371.1099
Fax:
1.925.245.1286
Festo Worldwide
Argentina
Estonia
Lithuania
Slovakia
Australia
Finland
Malaysia
Slovenia
www.festo.com
Austria
France
Belarus
Germany
Mexico
South Africa
Belgium
Great Britain
Netherlands
South Korea
Brazil
Greece
New Zealand
Spain
Bulgaria
Canada
Chile
Hong Kong
Hungary
India
Norway
Sweden
Peru
Switzerland
Philippines
Taiwan
China
Colombia
Indonesia
Poland
Thailand
Iran
Croatia
Ireland
Romania
Turkey
Czech Republic
Israel
Russia
Ukraine
Italy
Denmark
Japan
Serbia
United States
Latvia
Singapore
Venezuela