NEW PRODUCT 1 - Gregg Distributors

Transcription

GREGG DISTRIBUTORS LTD.
NEW PRODUCT
SUPPLEMENT CATALOGUE
In this issue:
3M Industrial Use Negative Pressure Respirators.....................................SP01-31
AVMOR® Carpet Care...............................................................................SP01-26
AVMOR® Cleaning Products......................................................................SP01-28
AVMOR® Disinfectant Cleaners.................................................................SP01-27
AVMOR® Dispensers..............................................................SP01-28 to SP01-29
AVMOR® Floor Care..................................................................................SP01-26
AVMOR® Foodservice Care.......................................................................SP01-27
AVMOR® Washroom Care.........................................................................SP01-26
BEHRINGER Pipe Clamps.....................................................SP01-34 to SP01-35
BOSCH Diagnostic Equipment..................................................................SP01-24
BUSINESS/OFFICE SUPPLIES 3M Post-it® Tape...................................SP01-23
CASTROL® Motor Oils, Lubricants, & Fluids............................................SP01-30
CAT® CLOTHING Fleece Jacket...............................................................SP01-31
CAT® FOOTWEAR Industrial Footwear.....................................................SP01-31
CHAPIN® Industrial Sprayers....................................................................SP01-51
CROSBY Fittings.......................................................................................SP01-38
CROSBY Hoist Rings................................................................................SP01-38
DYNALINE Hardware & Automotive Products...........................................SP01-24
FLUKE Accessories................................................................SP01-50 to SP01-51
FLUKE Clamp Meters................................................................................SP01-41
FLUKE Digital Multimeters.....................................................SP01-39 to SP01-41
FLUKE Indoor Air Quality Tools.................................................................SP01-49
FLUKE Power Quality Tools & Power Analyzers....................SP01-43 to SP01-44
FLUKE Laser Distance Meters..................................................................SP01-47
FLUKE Test Tools - Fluke Connect
Wireless System.....................................................................SP01-48 to SP01-49
FLUKE Thermal Imagers........................................................SP01-47 to SP01-48
FLUKE Thermometers............................................................SP01-45 to SP01-47
FLUKE True-RMS Clamp Meters..............................................................SP01-41
FLUKE True-RMS Digital Multimeters.......................................................SP01-39
FLUKE Testers.......................................................................SP01-42 to SP01-43
FLUKE Vibration Meters.........................................................SP01-44 to SP01-45
GROTE Trailer Connectors.......................................................................SP01-33
KNAACK JUNK TRUNK Jobsite Chest.....................................................SP01-09
1
2015
LOCTITE® Retaining Compounds.............................................................SP01-30
MAKITA Outdoor Power Equipment....................................... SP01-11 to SP01-13
MAKITA Power Tools.............................................................. SP01-10 to SP01-11
MALLORY® Snowbrush.............................................................................SP01-30
MARSHALLTOWN Concrete Tools.........................................SP01-04 to SP01-06
MARSHALLTOWN Drywall Tools...........................................SP01-06 to SP01-08
MARSHALLTOWN Flooring Tools..........................................SP01-08 to SP01-09
MARSHALLTOWN Masonry Tools.........................................SP01-02 to SP01-03
MR. HEATER® Forced Air Propane Heaters.............................................SP01-13
NORTON Core Bits...................................................................................SP01-23
NORTON Diamond Tools and Accessories............................SP01-14 to SP01-19
NORTON High Speed Diamond Blades....................................................SP01-20
NORTON Masonry Diamond Blades.........................................................SP01-20
NORTON Portable Hand-Held Diamond Blades.......................................SP01-22
NORTON Portable Hand-Held Diamond Cup Grinders.............................SP01-22
NORTON Silencio Diamond Blades..........................................................SP01-23
NORTON Tile Diamond Blades.................................................................SP01-21
NORTON Walk Behind Diamond Blades...................................................SP01-21
PIONEER® Winter Hard Hat Liners...........................................................SP01-30
PIRIT® Heated Hose..................................................................................SP01-32
PREDATOR™ High Tension Clamps........................................................SP01-32
PRIORITY® Cylinder Storage Cabinets.....................................................SP01-25
PRISTINE™ Tilt Trucks.............................................................................SP01-29
PRONGHORN™ Electrical Products........................................................SP01-25
PROPEL™ HD Cranes & Engine Stands..................................................SP01-37
PROPEL™ HD Jacks.............................................................SP01-35 to SP01-37
PROPEL™ HD Miscellaneous Equipment................................................SP01-38
PROPEL™ HD Portable Hydraulic Equipment..........................................SP01-37
PROPEL™ HD Shop Presses...................................................................SP01-38
SLIP-N-GRIP® Car Accessories................................................................SP01-51
WHITEBOARDS Single-Sided..................................................................SP01-23
MARSHALLTOWN
MST/2750
Masonry Tools
PHILADELPHIA STYLE TROWEL
Philadelphia pattern trowels are better suited for laying
block because they allow for more mortar to be placed on
the blade.
•Forged from a single piece of high carbon steel, then heat
treated for strength and durability •Blade is taper ground and
polished •Handle rise is set for the correct hang and balance
•Impact area is extra strong •Resilient DuraSoft® handle with
integral finger guard
Part No. 199.5FG, 9½” x 4¾”.
Part No. 1910.5FG, 10½” x 5¼”.
Part No. 1911FG, 11” x 5½”.
PHILADELPHIA STYLE POINTING
TROWELS
Philadelphia pattern trowels are better suited for laying
block because they allow for more mortar to be placed on
the blade.
•Forged from a single piece of high carbon steel for
unsurpassed strength •Resilient DuraSoft® handle with
Part No. 455D, 5” x 2½”.
Part No. 456D, 6” x 2¾”.
LONDON STYLE TROWEL
London pattern trowels are the standard blade type for
laying brick.
•Forged from a single piece of high carbon steel, then heat
treated for strength and durability •Handle rise is set for the
correct hang and balance •Blade is taper ground and polished
•Impact area is stronger •Resilient DuraSoft® handle with
Part No. 339FG, 9” x 4¼”.
Part No. 3310FG, 10” x 4-5/8”.
Part No. 3311FG, 11” x 4-7/8”.
MARGIN TROWELS
GAUGING TROWEL
INSULATOR’S TROWEL
MAGNESIUM HAWKS
ALUMINUM HAWKS
TUCK POINTERS
BRICK JOINTERS
JOINT RAKER
GROUT BAG
DISPOSABLE GROUT BAG
Guarded Mason’s Chisel
BRICK TONGS
•Forged from a single piece of high carbon
steel •Tempered, ground and polished from
toe to heel •Resilient DuraSoft® handle with
Part No. 52D, 5” x 2”.
Part No. 54D, 5” x 1½”.
•Made of heavy gauge, hard-rolled aluminum
•Edges have been smoothed and the corners
rounded •Callus preventer and handle
included •Wood handle
Part No. 1W, 13” x 13”.
•Made of seamless black vinyl
Part No. GB691, 12” x 24”.
SP01-2
steel •Carefully taper ground and polished
•Many uses, including mixing or “gauging”
small quantities of mortar or quick setting
plaster •Resilient DuraSoft® handle with
Part No. 48D, 7” x 3-3/8”.
•Forged from one piece of high carbon steel
•Tapered for the required sturdiness and
correct flexibility •High shank and high lift give
plenty of hand room •Resilient DuraSoft®
handle with integral finger guard
Part No. 502D, 6½” x 3/16”.
Part No. 503D, 6½” x 1/4”.
Part No. 504D, 6¾” x 5/16”.
Part No. 505D, 6¾” x 3/8”.
•Great for hard to clean materials •Trim tip to
desired opening •Thermally sealed edge and
tip to prevent leaks •Box of 50.
Part No. DGB661, 11” x 21”.
•Forged from a single piece of the highest
grade tool steel •Tempered, ground and
polished •Flexible blade is ideal for working
with insulation •Resilient DuraSoft® handle
with integral finger guard
Part No. 48AD, 7” x 3-3/8”.
•Made from high carbon steel •Each end is a
different joint size •10½” length
Part No. 83, 3/8” and 1/2”.
Part No. 80, 1/2” and 5/8”.
Part No. 82, 5/8” and 3/4”.
Part No. 81, 3/4” and 7/8”.
• Plastic guard protects hand and prevents
slippage down the chisel •Forged from the
finest quality tool steel, hardened, tempered
and well-balanced
Part No. 604B26SG, 7”L x 4”W.
•Made of lightweight durable magnesium
•Score marks are machined to a uniform depth
and specially shaped to help the blade remain
flat •Callus preventer and handle included
•DuraSoft® handle
Part No. 5206D, 13” x 13”.
•Large 1¾” skate wheels •Strong aluminum
handle is contoured to fit the hand and
squared off at the end •Hardened nail, adjusts
to proper depth
Part No. 89, 8½” x 3” size.
•Heavy-duty design, built for long wear,
maintenance free •Can be quickly adjusted to
carry from six to ten bricks
Part No. 88, 16” to 26½” size.
MARSHALLTOWN
MST/2750
Masonry Tools
RUB BRICK
•Ideal for dressing down and removing marks
from concrete or cleaning brick •20 grit
•Fluted, comes with handle
Part No. 841, 8” x 3½” x 1½”.
GATORBACK® MORTAR
BOARD
•Water resistant, contour surface is
designed to keep mortar and stucco at
optimal workability and consistency •Made
of a lightweight, impact and UV resistant
polymer that won’t conduct heat and is nearly
indestructible •Reinforced integrated handle
for easy transportation •Reinforced ribbing
enables Gatorback® mortarboards to hold up
to 150 lbs of material with little flex
Part No. GBK0306, 24” x 24”.
BRAIDED NYLON MASON’S LINE
•Size #18 •6” core •Will not unravel if struck by a trowel •Not affected
by extreme moisture or dryness •Won’t mildew and stays taut
Part No.
Description
622M
ML605
ML606
631M
ML607
632M
623M
624M
626
ML340M
ML339M
ML338
ML341
625
628
627
ML609
ML610
ML611
ML612
250 ft. (76M) White
250 ft. (76M) Yellow
250 ft. (76M) Green
250 ft. (76M) Fl. Pink
250 ft. (76M) Fl. Orange
250 ft. (76M) Fl. Yellow
500 ft. (152M) White
500 ft. (152M) Green
500 ft. (152M) Fl. Pink
500 ft. (152M) Fl. Green
1000 ft. (305M) White
1000 ft. (305M) Green
1000 ft. (305M) Fl. Pink
MASON’S LINE WINDER
•Plastic winder •#18 braided orange mason’s
line •Handle is tapered
Part No. 634, 250 ft. (76M) Orange
HEAVY DUTY RUBBER
PAILS
•Heavy duty rubber-will not rust, dent, leak or
chip •Bounce back upon impact •Resist heat
and cold, lime, acids, salt, water, fuels, grease
and chemicals
Part No. DF12, 12 qt. pail with standard lip.
Part No. DFP18, 18 qt. pail with pouring lip.
TWISTED NYLON MASON’S LINE
Part No.
Description
•Bristles made of white Tampico fiber •3½”
(89 mm) bristles are set securely in hardwood
block
Part No. 829, 6½” X 1¾” size.
•Used to hold line and maintain
straightness during brick/block laying
•Made of steel •Pack of 14
Part No. 16509.
•Winder can be driven into the ground to allow
for hands free use •Made of durable highdensity polyethylene •Can be refilled with any
length or type of mason’s line that is wound
onto a 6” core • 500 ft. (152M)
Part No. SLW66FO, #18 twisted mason’s line,
Orange.
Part No. SLW66FY, #18 braided mason’s
line, Yellow.
285 ft. (87M) White
500 ft. (152M) White
500 ft. (152M) Fl. Pink
1000 ft. (305M) White
1000 ft. (305M) Fl. Pink
MASONRY BRUSH
LINE PINS
WOOD LINE BLOCKS
•Shaped from poplar hardwood •Sold in pairs
Part No. 86, 3¾” size.
•Made of tempered zinc plated steel
for increased durability •Tapered
ends allow easier insertion •4 line
pins per bag •4¼” long
Part No. 11735.
•Made of extra high density, UV stabilized
polyethylene •Durable, lightweight and easy to
clean •Dry mortar will not stick •Not affected
by heat and cold, rust, plaster, mortar and
water •10 cubic foot (.28 cubic meter) capacity
Part No. 11165, 60” x 32” x 11”.
REFILLABLE STAKE
MASON’S LINE WINDERS
•Size #18 •6” core •”Heat-set” after winding to stabilize
•Not affected by mortar, oil, or mildew and will not absorb
water
620
621
ML577
ML578
ML579
ML581
ML582
ML583
ML584
629
ML585
ML587
ML588
ML589
ML590
LINE TWIGS
MORTAR BOX
PLASTIC LINE BLOCKS
•Bright yellow plastic is highly visible and
impervious to water •Twigs keep mason’s line
from sagging •Included are 4 plastic line twigs,
2 pair of blocks
Part No. 86P, 5” X 2¼”.
FLOOR SCRAPERS
•60 X 1-1/8” steel handle securely welded to heavy angle iron bracket
•Blade is heavy gauge spring steel •Plastic grip on handle to protect hands
•This durable scraper is perfect clean-up tool
Part No. 420, 9” x 4½”.
Part No. 420B, Blade for #420.
Part No. 720, 14” x 4½”.
Part No. 820, 20” x 4½”.
www.greggdistributors.ca
SP01-3
MARSHALLTOWN
MST/2751
Concrete Tools
HIGH CARBON STEEL FINISHING TROWELS
•Highest grade hardened and tempered spring steel blade, properly shaped •Aluminum
alloy Xtralite® mounting is lightweight but very strong •Beveled work edges prevent surface
aggregate popping •Resilient DuraSoft® handle provides a soft feel, reduces fatigue and offers
excellent durability
Part No. MXS56D, 12” x 3”.
HIGH CARBON STEEL POOL TROWELS
•Highest grade hardened and tempered spring steel blade, properly shaped •Short aluminum
alloy Xtralite® mounting is lightweight but very strong •Blade is flexible enough to conform to
almost any radius •DuraSoft® handle
Part No. SP10SD,10” x 3”.
Part No. SP14SD, 14” x 4”.
Part No. SP16SD, 16” x 4½”.
MIDGET TROWEL
•Aluminum alloy Xtralite® mounting is
lightweight but very strong •DuraSoft® handle
Part No. 11D, 8” x 3”.
FINISHING TROWEL
HANDLE
•Curved DuraSoft® handle
Part No. 402D, 1-9/16” dia.
HEAVY DUTY ZINC HAND
EDGER
STRAIGHT END HAND
EDGERS
•Made from high quality, long wearing zinc
•Resilient DuraSoft® handle provides a soft
feel, reduces fatigue, and offers excellent
durability •Smooth finish allows for easier
clean-up •Longer lasting and heavier than
steel edgers
Part No. 4002D, 9” x 4”.
feel, reduces fatigue and offers excellent
durability •Used to produce a radius at the
edge of a concrete slab to help prevent the
edge from chipping
Part No. 36D, 6” x 3” carbon steel blade.
Part No. 160SSD, 6” x 4” stainless steel blade.
CURVED END HAND
EDGERS
HEAVY DUTY ZINC HAND
GROOVERS
WOOD HAND FLOATS
SIDEWALK SLICKER FLOAT
CAST MAGNESIUM HAND
FLOAT
BEVELED END
MAGNESIUM HAND
FLOATS
ROUND END MAGNESIUM
HAND FLOAT
FLOAT HANDLE
•Both ends are curved up for use in either
direction •Resilient DuraSoft® handle provides
a soft feel, reduces fatigue and offers excellent
durability •Used to produce a radius at the
edge of a concrete slab to help prevent the
edge from chipping •Curved ends help prevent
edger from digging into wet concrete
Part No. 136D, 6” x 3” carbon steel blade.
•Cast from the finest magnesium •Designed
with just the right broken-in shape •Cast
construction allows more knuckle clearance
•Placement of the handle gives the float perfect
balance
Part No. 148D, 16” x 3-1/8”.
SP01-4
•Made from high quality, long wearing zinc
feel, reduces fatigue and offers excellent
durability •Smooth finish allows for easier
cleanup •Finely finished to cut sharp clean
grooves •6” x 4-3/8”
Part No. 833D, 1/2” Depth.
Part No. 834D, 3/4” Depth.
Part No. 835D, 1” Depth.
•Extruded from very hard, durable, lightweight
magnesium •Our most popular float design
•Comfortable handle is positioned to give the
tool perfect balance •Recommended for use
with air entrained concrete •Magnesium floats
produce a smoother finish than wood
Part No. 142D, 12” x 3-1/8”.
Part No. 145D, 16” x 3-1/8”.
Part No. 146D, 20” x 3-1/8”.
•Made from clear, seasoned redwood,
3/4” thick •Primarily used for leveling and
smoothing concrete prior to final finish •Also
ideal when a slightly rougher concrete finish
is desired
Part No. 44D, 12” x 5”.
Part No. 144D, 16” x 3½”.
•Extruded from very hard, durable, lightweight
magnesium •Fully rounded ends help prevent
float marks •Comfortable handle is positioned
to give the tool perfect balance •Magnesium
floats produce a smoother finish than wood
•Handles are secured with torque pad screws
that will not back out
Part No. 143D, 16” x 3-1/8”.
•The same lightweight, durable extrusion as
our magnesium floats •Moves easily around
obstacles and easily accesses hard to reach
places •Comes with 360˚ EZ Twist Bracket
•Requires threaded or snap adapter (sold
separately)
Part No. RED700228, 24” x 3½”.
Part No. RED700229, 36” x 3½”.
•Fit all of our magnesium hand floats
Part No. 16D, 9” x 1¼” DuraSoft®.
MARSHALLTOWN
MST/2751
Concrete Tools
MAGNESIUM BULL FLOATS FRESNO TROWEL
•Made from the finest extruded magnesium
available •Lightweight, long wearing and
properly balanced to provide the finish you
want •No other heavy duty bull float outlasts
this one
Part No. B36, Square End, 36” x 8”.
Part No. B36FR, Round End, 36” x 8”.
Part No. B48, Square End, 48” x 8”.
Part No. B48FR, Round End, 48” x 8”.
•Superior quality high carbon steel blade
•Round ends leave less drag marks •All-angle
swivel attachment included
Part No. C36R, Round, 36” x 5”.
PUSH BUTTON ADAPTERS
ROCK-IT™ 2.0
•Fit 1-3/8” and 1¾” push button handles •Use
with bull floats, fresnos, brooms, etc.
Part No. 4818, Clevis End.
Part No. 4819, Male Thread.
Part No. 4822, Bull Float Adapter.
•Allows multi-angle floating •Enables use with
extension handles for extremely long ranges
•Full pitch controlled by half turn of handle
•Fits all magnesium bull floats without adapter
plates •Fits all push button handles - 1-3/8”
and 1¾” without any additional adapters
Part No. BF9.
ALUMINUM THREADED
HANDLE SECTION
PUSH BUTTON HANDLE
SECTIONS
360˚ TWIST BRACKETS
BULL FLOAT
REPLACEMENT PARTS
•Lightweight aluminum •The large threads can
be combined with similar handles
Part No. B572, 72” length, 1¾” dia.
•Compatible with bull floats, groovers, edgers,
fresnos, brooms and more •Allows quick,
easy adjustments on the job •0° to 90°
handle-angle adjustment and full 360° rotation
of finishing tool
Part No. 360PBA134, Push Button Adapter.
Part No. 360THREAD, Threaded Handle
Adapter.
•Anodized spring loaded button-type aluminum
sections snap together quickly and will not
loosen during use
Part No. PB72, 72” length, 1-3/8” dia.
Part No. PB72L, 72” length, 1¾” dia.
•Fits most four hole bull floats
Part No. A3001, Handle Socket.
Part No. A3002, Bracket Base.
Part No. A3003, Threaded Complete
Assembly.
A3001
A3002
A3003
FRESNO TROWEL
ADAPTERS
ALL ALUMINUM PLACERS
•Aluminum construction, powder coated
with soft grip end-cap •Braced for additional
•Aluminum casting •Designed specifically to
connect standard threaded handle sections to strength •60” long
a fresno, walking edger or groover or any other Part No. AP753, Placer without Hook.
tools that are equipped with similar attachment Part No. AP753H, Placer with Hook.
devices •Unique “wrench-flats” feature for
easy removal
Part No. 3748.
ALUMINUM ALLOY
SCREEDS
SCREED HANDLES
•Premium high strength aluminum alloy won’t
rust or rot, warp resistant •End capped to prevent concrete from getting inside •Lightweight,
long wearing and rigid •H-style design for
added strength
Part No. 14770, 8 ft. x 1½” x 3½”.
Part No. 14771, 10 ft. x 1½” x 3½”.
Part No. 14772, 12 ft. x 1½” x 3½”
WOOD BACKED CONCRETE BROOM ADAPTERS
DUST PANS
•#6515 has an all-angle center mount •Cut out •Black baked enamel finish is durable with
BROOMS
•Long wearing 3” black polypropylene bristles
set solidly into a natural lacquered hardwood
block •Threaded hole accepts any standard
broom handle •Ideal for applying non-slip finish to newly finished concrete surfaces
Part No. 830, 24” length.
section of adapter fits over broom bracket and
accepts broom thread handle •#6516 mounts
to most broom heads and accepts the #6515
allowing broom heads to be used with different
handles
Part No. 6515, Threaded Handle Clevis
Adapter.
Part No. 6516, Clevis Adapter Base Bracket.
beveled edge •Corrugated ribs add to strength
•Made of heavy 20-gauge steel
Part No. DP12, 12” length.
Part No. DP16, 16” length.
•Attach to each end of screed board for sawing
applications •Comfortable soft grip handles
•Sold as a set of 4 handles, with mounting
hardware and template
Part No. 10665.
KNEELER BOARD
•Extra large handle grips •Offers extracomfortable support for knees •Black foam
pad securely fastened to generously sized
polypropylene tray
Part No. KB451, 19” x 13½”.
SP01-5
MARSHALLTOWN
MST/2751/2752/2753
Concrete Tools
REBAR BENDER
•Bends rebar up to #5 ( 5/8” rebar) grade 60
PULL TIE WIRE TWISTER
TIE WIRE REELS
TIE WIRE TWISTERS
MAGNESIUM ASPHALT
RAKE
BRACED MAGNESIUM
LUTE RAKES
U SHAPED PUSH CRACK
SQUEEGEE
16” WIRE STREET BROOM
HEAD
ASPHALT RAKE
BROAD KNIVES
PERMASHAPE® “FLAT”
TROWEL
•Safely and easily twists looped wire bar ties
•Rubber grip handle •Twists most ties with a
single pull
•Fits any standard size belt •Accomodates all
types of tie wire
Part No. TWR19, Constructed of lightweight
aluminum.
Part No. TWR26, Made of lightweight durable
plastic.
•Compact size allows the tool to be used in
tight spaces •Safely and easily twists looped
wire bar ties •Durable design
Part No. 14731, Standard.
Part No. 14171, Heavy-Duty.
Asphalt Tools
POUR POTS
•Durable, 14 gauge welded steel construction
•Fingertip nozzle control •Adjustable pouring
nozzle from 1/2” down to 3/8” •Used to apply
cold crack sealants •2.6 gallon capacity
Part No. RED704988W, Pour Pot with Wheels.
Part No. RED704989, Pour Pot with Long
Handle.
•Lightweight “T” section blade has blunt teeth
which are designed to allow material to pass
through without catching •Rugged formed
steel pole connector prevents breakage and
ensures rigidity
Part No. 838, 36” Lute Head.
Part No. 839, 72” Handle Only.
V SHAPED CRACK
SQUEEGEE
•Unique V shape design allows you to push
or pull material into cracks •Forces sealant
down into crack while pushing excess
material forward •Black neoprene blade has a
temperature rating of 170°C •Comes complete
with a 54” clevis style wood handle •Use with
crack pour pot
Part No. RED704942, Squeegee.
Part No. RED704943, Replacement Black
Neoprene Blade.
•Durable lightweight magnesium head
•Combination lute rake •Aluminum handle •All
parts are easily replaceable •Comes with 7 ft.
handle •3” x 36” rake
Part No. RED700092, Blunt blade.
Part No. RED700102, Sharp blade.
Part No. RED700112, Plain blade.
•Coated steel wire •Built strong to withstand
heavy duty cleaning of driveways and parking
lots •3¾” bristles
Part No. RED704152.
•Comes complete with a 54” wood handle
•Black neoprene blade •U shaped cavity
leaves a wider path of sealant •Use with crack
pour pot
Part No. RED700996, Squeegee.
Part No. RED714193, Replacement Black
Neoprene Blade.
•14 teeth 3¾” long •15½” level head •60”
lacquered ash handle
Part No. RED802921.
Drywall Tools
DURASOFT® STAINLESS
STEEL TAPING KNIVES
•Tempered premium stainless steel blade
with aluminum backing plate •Tapered blade
flexes just right for feathering but won’t take
a set •Resilient DuraSoft® handle provides a
soft feel, reduces fatigue and offers excellent
durability
Part No. 3506SD, 6” x 3”.
Part No. 3508SD, 8” x 3”.
Part No. 3510SD, 10” x 3”.
Part No. 3512SD, 12” x 3”.
Part No. 3514SD, 14” x 3”.
SP01-6
DURASOFT® BLUE STEEL
TAPING KNIVES
•Premium tempered blue steel blade with
aluminum backing plate •Blade is tapered so
you can run corners faster and easier •Blade
flexes just right for feathering but won’t take
a set •Resilient DuraSoft® handle provides a
soft feel, reduces fatigue and offers excellent
durability
Part No. 3506D, 6” x 3”.
Part No. 3508D, 8” x 3”.
Part No. 3510D, 10” x 3”.
Part No. 3512D, 12” x 3”.
Part No. 3514D, 14” x 3”.
•Blue spring steel blade •Lightweight
aluminum handle •Used for taping and
seaming joints •Rubber handle cap with
hanger •More flexible than a taping knife
Part No. BK386, 9” x 17-7/8”.
Part No. BK388, 9” x 28”.
•Guaranteed to stay flat use after use •Made
from highest grade stainless steel •Properly
shaped and tempered to a golden finish
•Withstands pressure of hard-troweling •Flat
blade makes applications easier with more
consistent finish •Smooth, natural finish
hardwood handle
Part No. 165GSFP, 16” x 5”.
MARSHALLTOWN
MST/2750/2751/2753
Drywall Tools
DURAFLEX TROWELS
•PermaShape® guarantees trowel will maintain original flat shape •Flat, yet flexible blade makes
applications easier with more consistent finish •Highest grade hardened and tempered golden
stainless steel blade, properly shaped and fastened with stainless steel rivets •Withstands
pressure of hard-troweling •9¾” mounting
Part No. 4663DFDL, 12” x 5”.
Part No. 4681DFDL, 13” x 5”.
METAL MUD PAN
•Made from stainless steel •Tapered ends
and sides with mud-tight seams •Sides are
sheared to clean knives easily
Part No. 812.
Top Length: 14”
Bottom Length: 12½”
Top Width: 4-5/8”
Bottom Width: 3”
Height: 3-5/8”
HAWK HANDLES
•DuraSoft® handle •Comes with a bolt for
secure fastening
Part No. 412D.
THIN COAT INSIDE
CORNER TROWEL
OUTSIDE CORNER
TROWEL
PLASTIC MUD PAN
ALUMINUM HAWKS
•Lightweight tool made from one piece of
flexible stainless steel •Has a 90° angle
between the blades •Resilient DuraSoft®
handle with integral finger guard •Used to
embed tape and smooth out the final layer of
mud to taped corners
Part No. 24D, 5” x 3¾”.
•Made of long wearing plastic with hang-up
tab •Equipped with two metal wiping blades
•Resists chemicals and temperature changes
•Outside is slightly textured to provide a nonslip surface
Part No. 814.
•Made of heavy gauge hard-rolled aluminum
•Edges have been smoothed and the corners
rounded •Has a threaded 3-5/8” flange
•Handle and sponge rubber callus preventer
included •DuraSoft® handle
Part No. 1D, 13” x 13”.
Top Length: 14-7/8”
Bottom Length: 13¼”
Top Width: 4¾”
Bottom Width: 3”
Height: 3¼”
CALLUS PREVENTER
EGGBEATER MIXER
•Made of sponge rubber •Can be used with
any hawk
Part No. 0.
• Welded all-steel construction; fully plated
• 7/16’’ (11mm) steel hex shaft
BUCKET DIPPERS
PANEL LIFTER
•Galvanized steel construction •Scoop mud
directly on trowel or hawk •Soft grip handle
for increased grip and less fatigue •Bucket
hanging clip for less mess and easy storage
Part No. BD862, 1 litre capacity.
Part No. BD863, 0.6 litre capacity.
•Lightweight tool made from one piece of
flexible stainless steel •Blade set at an 80°
angle that flexes during use to 90° to form
a clean square outside corner •Resilient
DuraSoft® handle with finger guard •Used to
embed tape and smooth out the final layer of
mud to taped corners
Part No. 25D, 5” x 3¾”.
• Non-slip checkered surface provides foot
traction •Self-righting feature makes it ready
for use without fumbling •Tapered front end
slides easily under the board; then it lifts and
holds it in place while nailing
Part No. 790, 12” x 5¼”.
QUICK-MIX MIXERS
•Blade is securely welded to 3/8” hex shaft
•Ideal for stirring and blending paint, drywall
mud and acoustic quickly and lump free
•Works with all 7/16” or larger and a limited
number of 3/8” slow speed drills •Blade
measures 8½” x 4½”
PANEL LIFTER/RASP/
BOTTLE OPENER
•Non-clogging rasp with protective guides
•Lifts all standard sizes of drywall sheets
•Lightweight, compact, fits in pocket •Bottle
opener integrated into lifter
Part No. PL589.
SP01-7
MARSHALLTOWN
MST/2751/2753/2754
Drywall Tools
DURASOFT® DRYWALL
RASP
DRYWALL SAW
DRYWALL CIRCLE CUTTER RUBBER FLOATS
•Hardened cutter wheel and center pin will
remain sharp indefinitely •Cuts sharp clean
circles up to 16” in diameter with only one
hand •Measure accurately on the calibrated
steel shaft
Part No. CC766, 8½” length.
•Has a 5/8” thick red rubber pad specially
bonded to the aluminum backing plate for long
wear •Frequently used by plasterers and other
finishers for rough and/or textured finishes
•9” x 4”
Part No. 38, Fine.
Part No. 39, Coarse.
MOLDED RUBBER FLOAT
DURASOFT® HAND
SANDER
WALL REPAIR PATCH KIT
KNOCKDOWN KNIVES
TILE GROUTER’S FLOAT
TILE GROUTER’S MARGIN
FLOAT
•Removes 45% more material per stroke than
other popular rasps •Will not clog or collect
dust •Works in both directions •Long-lasting
premium stainless steel blade •Contoured
DuraSoft® handle ensures a good grip •Ends
of blade get into tight spaces •Sharp blade
has many other uses like backer board and
vinyl tile
Part No. DR390.
•Molded black rubber pad is very compact and
has a dense texture •Float face is permanently
cemented to the lightweight aluminum backing
•The ideal float for bringing sand to the surface
Part No. 40, 9” x 4”.
•Cuts quickly through wallboard, gypsum, lath
and thin coat backing board •Hardened and
tempered blade •Five teeth per inch
Part No. DS921, 15” length.
•Lightweight aluminum backing plate bonded
to foam pad •Resilient DuraSoft® handle
provides a soft feel and reduces fatigue
•Designed for die-cut or a half sheet of
standard sandpaper or sand screen
Part No. 20D, 9-3/8” x 3¼”.
•No-rust aluminum plate provides rigid backing
•Self-adhesive patches •Fiberglass mesh
eliminates the need to pre-plaster
Part No. DP4, 4” x 4”.
•Blades made of GE Lexan® •Threaded
DuraSoft® handle with metal ferrule and
hanging hole •Drying time reduced when used
for texturing
Part No. KD18, 18” length.
Part No. KD24, 24” length.
Flooring Tools
STANDARD & NTCA APPROVED NOTCHED TROWELS
•Aluminum alloy mounting riveted to a hard tempered steel blade •Choice DuraSoft® or
hardwood handle •Blade size is 11” x 4½”
Part No. 703SD, 3/16” x 1/8” x 3/16” Square notch.
Part No. 702SD*, 1/4” x 1/4” x 1/4” Square notch.
Part No. 5779SD, 3/8” x 3/8” x 3/8” Square notch.
Part No. 704SD, 3/32” x 3/32” x 1/8” U notch.
Part No. 718SD, 1/4” x 1/4” x 1/4” U notch.
Part No. 701SD, 7/32” x 5/32” V notch.
Part No. 779SD, 1/4” x 1/4” V notch.
*NTCA Approved Trowels
PLASTIC FOAM FLOATS
•Plastic foam pad specially bonded to an
aluminum backing plate •Wears well and does
an excellent job on any sand surface •Pads
are 3/4” thick
Part No. 46G, Green/Fine, 9½” x 4”.
Part No. 4417, Replacement Pad.
SP01-8
TILE SETTER’S TROWEL
steel •Blade is fully tempered, ground and
polished •DuraSoft® handle
Part No. 57D, 7” x 4-3/8”.
•Pure gum rubber face is bonded to the dense
rubber pad; cemented to an aluminum backing
plate with a smooth handle •Edges are
beveled and the two front corners are rounded
•Dense rubber pad is designed specifically for
tile grouting
Part No. 43, 9” x 4”.
CRESCENT® TILE NIPPERS
•Has 5/8” offset jaws with carbide tips •Unique
handle design for added comfort •Plastic grip
•Handle stops to protect tips •Center spring
returns jaws to open position
Part No. GT28CN.
•Pure gum rubber face is bonded to the
dense rubber pad; cemented to a tempered
steel blade with a soft grip handle •Edges
are beveled •Dense rubber pad is designed
specifically for tile grouting
Part No. MF54, 6” x 2”.
NOTCHED MARGIN
TROWELS
•Forged from a single piece of highest grade
tool steel •Tempered, ground and polished
from toe to heel •DuraSoft® handle •Blade
size is 5” x 2’’
Part No. 52SND, 1/4 x 1/4 x 1/4 Square-Notch
Size.
Part No. 52VND, 1/4 x 3/16 V-Notch Size.
MARSHALLTOWN
MST/2753/2754
Flooring Tools
“DELUXE BIG CLINKER” TILE CUTTER
TILE FILE
•Four position scoring height adjustment knob to allow scoring and cutting of tiles up to 3/4”
thick •Cutter has 20 mm diameter dual chrome plated steel bars that are heat treated for
longest life •Features a 4¾” wide breaker foot and a 12” wide protractor gauge •Makes 27½”
straight cut and 19½” diagonal cut length
Part No. JP700ST, “Deluxe Big Clinker”.
Part No. 22X, Replacement Titanium Rotary Wheel.
•Removes sharp and irregular edges from tile
and marble •Tungsten carbide grit •Soft grip
handle
Part No. TILEFILE.
GROUT SAW
KNEE KICKER
•Resilient DuraSoft® handle with finger guard
•Die cast aluminum mounting with thumb rest
•Blade coated with tungsten carbide
Part No. 446.
Part No. 15465, Replacement Blades.
KNA/2605
T-HANDLED FLOOR
SCRAPER
•All steel heavy duty construction •54” long
T-handle •Removes many types of floor
coverings from a variety of floors •Ships with
7” blade
Part No. THS7.
Part No. THS7B, 7” Replacement Blade.
DURASOFT UNDERCUT
SAW
®
•Extra thick knee pad for comfort •Non-slip
hand grip •Adjusts from 17½” to 21½” •High
contour neck
Part No. CSKK Knee Kicker.
Part No. PPACS Pin Plate Assembly.
Part No. NGPCS Nap Grip Pads (3).
Part No. BACS Bumper Assembly.
Part No. KKSC Replacement Spring Clip.
•Undercuts door jambs and other wall base
obstacles •Specially shaped 12” long blade
permits right or left hand cutting •DuraSoft®
handle
Part No. US9041.
Part No. RB9041, Replacement blade.
BUCKET HEATER
•Designed to continuously heat buckets of
water •1000 watt, 120 volt power will heat
water over 150° •Ideal for use on cold winter
days •Stainless steel guard
Part No. 742G.
KNAACK
JUNK TRUNK Jobsite Chest
First and only jobsite chest with independent locking drawer.
Features: •JUNK TRUNK Quick Access Drawer - Heavy-duty independent locking drawer for quick
access to high demand tools and accessories
•Gas strut supported chest lid controls closing speed to prevent lid slamming, and locking hinge to
keep chest lid open
•Dual Watchman IV Lock System - Independent locking system for both the chest and JUNK
TRUNK quick access drawer
•Get your chest where you need it with standard 4-way skids adaptable for 6” wheel casters
•Built Knaack tough for security against theft and weather with 16 gauge steel and anti-theft design
•External Dimensions - Closed: 48” x 30” x 35”; Open: 48” x 52” x 62”
•Internal Dimensions - Chest: 47” x 29” x 22”, 17 ft3; Drawer: 42” x 29” x 5”, 3.5 ft3
•Weight - 254 lbs.
Part No. 4830-D.
SP01-9
MAKITA
MAK/2704
Power Tools
DRYWALL CUTOUT TOOL
PORTABLE BAND SAW
4-3/8” MASONRY SAW
SPECIFICATIONS
Collet Capacities: 1/8” and 1/4”
AMPS (120V): 5.0 A
No Load Speed: 32,000 RPM
Vibration Level: 2.5 m/s2
Noise Level: 82 dB(A)
Overall Length: 9-7/8”
Net Weight: 2.4 lbs
SPECIFICATIONS
Maximum Capacities:
Round Work Piece Diameter: 4¾”
Square Work Piece: 4¾” x 4¾”
Blade Speed: 197 - 354 ft. / min.
AMPS (120V): 6.5 A
Vibration Level : 2.5 m/s2
Overall Length: 20”
Net Weight: 13.2 lbs
SPECIFICATIONS
Blade Diameter: Max. 4-3/8”
Arbor: 3/4”
Maximum Cutting Capacity: 0o: 1-3/8” (34 mm)
Amps (120V): 9.6 A
Overall Length: 9¼”
Net Weight: 6.4 lbs
HEAT GUN
POWER SCRAPER
12.4 LBS. DEMOLITION HAMMER
•Tool-less depth adjustment
•Large shaft lock button enables quick and easy bit changes
•2-Way “slide and bump” on/off switch
•Airflow directed away from operator during operation
•Dust proof ball bearings enhance durability and tool life
•Ergonomic slim body for maximum operator comfort and
control
Includes: 1/8” drywall guide bit, 1/8” collet cone, 1/4” collet
cone, wrench, and wrench holder
Part No. 3706.
•Ideal for welding and forming plastics, heat shrink tubing,
soldering copper pipe, bending plastic pipe, thawing metal
pipes, activating/de-activating adhesives and putties, stripping
paint and more!
•2-Stage air volume control provides versatility in a wide range
of applications
•Rear housing design with integrated rubber bumpers allows
tool to be positioned upright for use as a static heating source
during two-handed operations
•Ergonomic soft rubber grip design for comfortable operation
Includes: plastic carrying case
Part No. HG5012.
SPECIFICATIONS
Air Temperature: 500°C (932°F)
Air Volume:
Low: 8.8 CFM (250 l/min)
High: 14.1 CFM (400 l/min)
AMPS (120V): 10 A
Watts: 1,200 W
Overall Length: 9.1”
•Built in work light for excellent efficiency
•Dual bearing blade guides for cutting
•Blade tightening lever for fast and easy blade installation
•Accepts standard 44-7/8” x 1/2” blade
•Lightweight design
•Electronic speed control dial
•Very rigid design minimizes tool flex while cutting
•Fluorescent job light with independent on / off switch
Includes: carbon steel band saw blade, hex wrench, d-style
front handle, and plastic carrying case
Part No. 2107FK.
•SDS-PLUS shank
•Ideal for removing tile, linoleum, cleaning out mortar or
detailed chiseling
•Factory grease packed for maintenance free operation
•Variable speed dial allows operator to adjust speed based on
materials or application
•One-touch sliding chuck for easy bit installation and removal
•12 Angle bit positions enable chisels to be positioned at
optimum angle of operation
Includes: SDS-PLUS scaling chisel and plastic carrying case
Part No. HK0500.
SPECIFICATIONS
Bit Type: SDS-PLUS
Blows Per Minute: 2,000 - 3,500 BPM
Impact Energy: 2.8 J (2.1 ft. lbs)
AMPS (120V): 5.0 A
Net Weight: 7.1 lbs
•Dry cutting masonry saw for stone, masonry, tile, concrete
and more
•Heavy duty aluminum gear housing for increased durability
•14Ga steel baseplate ensures accuracy and durability
•Leading edge of baseplate indicates precise line of cut
•Lock-off button prevents accidental startup for operator safety
•Dust proof switch prevents contamination of motor
•Flat motor housing allows tool to stand upright when changing
blades
Includes: 4” turbo rim diamond blade, wrench, and socket
wrench
Part No. 4100NH.
•SDS-MAX Shank
•Anti-Vibration Technology (AVT™) actively counteracts vibration of tool for greatly reduced transmission to operator
•Constant speed control maintains constant speed under heavy
load
•Soft start feature gradually increases speed to eliminate start
up shock
•Variable speed dial allows operator to adjust speed based on
materials or application
•No-load motor suppression limits vibration and bit deflection
when idling
•Auto-shut off carbon brushes shut off motor when carbon
brushes require replacement
•Slide style on/off switch for easy continuous use applications
•12 Angle bit positions enable chisels to be positioned at
optimum angle of operation
•One-touch sliding chuck for easy bit installation and removal
•Led service light indicates appropriate time to change carbon
brushes
•Led power light indicates active power supply
•Vibration absorbing handle with ergonomic soft rubber grip for
vibration absorption and comfortable operation
•Extra long carbon brushes for extended service life
Includes: bit grease, side handle, cleaning cloth, and plastic
carrying case
Part No. HM0871C.
3¼” PLANER
•Lightweight design for easy surface planing
• Base plate foot protects materials and blade from damage
•Single chamfering groove enables quick and easy chamfering of corners
•Depth adjustment knob with click stops for precision planing applications
•Lock-on button enables easy continuous operation and can be operated from left or right side
•Ergonomic soft rubber grip design for vibration absorption and comfortable operation
Includes: set of 3¼” double edged mini planer blades, blade gauge assembly, socket wrench 9, guide rule, and plastic carrying
case
Part No. KP0800KX.
SPECIFICATIONS
Maximum Capacities:
Planing Width: 3¼”
Planing Depth: 0-3/32”
Shiplapping: 0 - 11/32”
AMPS (120V): 6.5 A
Net Weight: 5.7 lbs
SP01-10 GREGG DISTRIBUTORS LTD.
SPECIFICATIONS
Bit Type: SDS–MAX
Blows Per Minute: 1,100 - 2,650 BPM
Impact Energy: 11.6 J (8.6 ft. lbs)
AMPS (120V): 10.0 A
MAKITA
MAK/2704
Power Tools
10” SLIDING COMPOUND MITRE
SAW with LASER
•Affordable, professional quality
•Sliding rail mechanism incorporating 3 linear ball bearings
provides increased rigidity to produce precise, adjustment free
cuts right out of the box
•Sliding fence (left side) can be adjusted outwards when bevel
cutting or inwards for increased support of small or delicate
materials
up shock
•Battery operated, factory calibrated class ii laser enables
accurate alignment of blade and cutting line
•Bevel capacity of 45° left or 5° right
•Mitre capacity of 47° left or 60° right with positive stops at 0°,
15°, 22.5°, 31.6° & 45°
•Re-located mitre scale enables easier viewing during operation
•2 Stage safety switch for increased operator safety
•Ergonomic vertical soft rubber grip design for vibration absorption and comfortable operation
Includes: 10” C.T. Blade 40T, box wrench 13-3, dust bag, vertical vise, triangle rule, and 2 ea. Holder
Part No. LS1017L.
Part no. Ls1017lx, includes mitre saw and workstation for easy
transport and jobsite portability.
SPECIFICATIONS
Blade Diameter: 10”
Arbor: 5/8”
AMPS (120V): 13.0 A
Overall Dimensions (LxWxH): 32½” x 21-1/8” x 22-7/8”
12” DUAL SLIDING COMPOUND
MITRE SAW
•Up To 15” Cuts In 2x Material, 8” Nested Crown Moulding And
6½” Vertical Baseboard
•Incorporates Makita’s NEW Deep And EXact Cutting Technology (DXT)
•Dual sliding rail mechanism incorporating 6 linear ball bearings provides increased rigidity to produce precise, adjustment
free cuts right out of the box
•3 Stage gear reduction system greatly increases capacity
when cutting vertical baseboard or nested crown molding
•Quick adjust, dual sliding fences can be adjusted outwards
when bevel cutting or inwards for increased support of small or
delicate materials
•Electronic speed control maintains constant speed under
heavy load
up shock
•Bevel capacity of 45° left or right with positive stops at 0°,
22.5°, 33.9° & 45°
•Mitre capacity of 52° left or 60° right with positive stops at 0°,
15°, 22.5°, 31.6° & 45°
•Re-located mitre scale enables easier viewing during operation
•Improved mitre lock for faster, simpler engagement during
operation
•2 Stage safety switch for increased operator safety
•Ergonomic horizontal soft rubber grip design for vibration
absorption and comfortable operation
Includes: 12” C.T. blade 60T, box wrench 13, dust bag, 2 ea.
Switch safety buttons, vertical Vise, triangle rule, and 2 ea.
holder
Part No. LS1216.
Part No. LS1216L, Comes with factory calibrated class II laser
enables accurate alignment of blade and cutting line.
14” POWER CUTTER
•14” cutting wheel
•Compliant with CARB tier 3, EPA phase 2 and EU stage 2
regulations
•New scavenging losses rejection (slr) muffler recycles exhaust
unburnt gas emissions for increased operational efficiency and
cleaner emissions
•Advanced 5 stage air filtration system for cleaner operation
and enhanced operational life
•Large air intake for maximum engine cooling
•Reversible cutting arm enables cutting disc to be side or
centre mounted for optimal operational versatility in a variety
of applications
•Electronic ignition with rev limiter
•Always use with 2 cycle synthetic oil
Includes: 14” cutting disk for stone 20 mm, tool kit, and water
attachment kit
Part No. EK7301, 20 mm arbor.
Part No. EK7301HD, 1” arbor.
SPECIFICATIONS
Displacement: 4.5 cu.in (73 cc)
Max. Power: 3.8 kW (5.1 H.P)
Fuel / Oil Mixture: 50:1
Fuel Tank Capacity: 1/3 Gal (1.1 L)
No Load Speed (Engine): 9,400 RPM
Max. Spindle Speed: 4,300 RPM
Max. Cutting Depth: 4-13/16”
Dry Weight: 22.5 lbs
SPECIFICATIONS
Blade Diameter: 12”
Arbor: 1”
AMPS (120V): 15.0 A
Overall Dimensions (L xW x H): 31¾”x
25¼”x 28-3/8”
Outdoor Power Equipment
BLOWER / VACUUM
•Double sided impeller and enlarged blower outlet provides
increased air volume for maximum performance and efficiency
•Self standing design allows tool to stand upright for use in
stationary applications
•Top and rear handle design enables comfortable positioning
for optimal jobsite maneuverability
•Converts quickly and easily between blower and vacuum
modes
•Variable speed trigger and dial enables operator to adjust
blower or suction speed based on the material or application
•Lock-on button for operator convenience during periods of
prolonged use
•Ergonomic soft rubber grip design for comfortable operation
Includes: nozzle assembly and dust bag assembly
Part No. UB1103.
SPECIFICATIONS
Max. Air Volume: 145 CFM (4.1 m3/min)
Max. Air Velocity : 203 MPH (91 m/sec)
No Load Speed: 0 - 16,000 RPM
AMPS (120V): 6.8 A
Overall Length: 18 -7/8”
Net Weight: 4.3 lbs
HEDGE TRIMMER
•Ergonomic soft rubber grip for vibration absorption and
comfortable operation
•Three switches are installed in handle, front grip and sub grip
•2-Hand operation switch–motor will run only when grips are
held with both hands
•Guard is provided at the tip of blades to prevent kick-back
•Blades are coated particularly to improve durability
•Built in clutch for safety
•Easy blade replacement
•Powerful 550w motor
•Protection of extension cord from breakage
Includes: cord holder complete set,hook complete set,blade
cover, and shear blade assembly set
Part No. UH5570, 21-5/8” Bar.
Part No. UH6570, 25½” Bar.
SPECIFICATIONS
Strokes Per Minute: 1,600 SPM
AMPS(120V): 4.8 A
Vibration Level : 6.7m/s2
Noise Level: 89.9 dB(A)
Overall Length: 40½”
Net Weight: 3.7 lbss
www.greggdistributors.ca SP01-11
MAKITA
MAK/2704
24.5 cc LINE TRIMMER
•Makita mini 4-stroke series curved shaft trimmer for professional use
•Professional series flexible shaft for maximum durability and
minimum vibration
•Wide trigger control and soft grip for comfortable operation
•Primer bulb and choke for easy starting
•Durable nylon string trimmer head
•Outstanding power to weight ratio
Includes: cutter assy, protective guard, box driver 10-16, hex
wrench 4, engine oil set 80cc, starter rope, spark plug, and
accessory bag
Part No. ER2550LH.
SPECIFICATIONS
Cutting Width: 16¼”
Displacement: 24.5 cc
Maximum Engine Power: 0.71 Kw / 0.97 HP
Carburator: Diaphram Type
Fuel Tank Capacity: 0.5L (500 ml)
Oil Tank Capacity: 0.08L (80 ml)
4-Stroke Crank Case Oil: 10W-30
Overall Length: 64”
33.5 cc 2 STROKE BRUSH CUTTER
Save the cost of the brush cutter with fuel savings alone !
•Can be used on any angle or slope
•Heavy duty solid steel straight shaft
•Clean exhaust emissions and lower fuel consumption
•Easy starting
•Equipped with “swivel system” u-handle for maximum operator
comfort
•40% Less fuel consumption compared to 2-stroke equivalent
Includes: 10” star blade, bump & feed trimmer head, protective
guard, trimmer head protective guard attachment, boxwrench
16-17, hexwrench m4, hexwrench M5, shoulder harness,
engine oil set 100cc, starter rope, spark plug, tool cover, and
accessory bag
Part No. EBH341U.
SPECIFICATIONS
Cutting Width:
10” With Blade
16” With Line Head
Carburetor: Diaphragm Type
•Save the cost of the trimmer with fuel savings alone !
•Can be used on any angle or slope
•Anti-vibration system for fatigue free use
•Clean exhaust emissions and lower fuel consumption
•Easy starting
•40% Less fuel consumption compared to 2-stroke equivalent
Includes: trimmer head assy, protective guard, trimmer head
protective guard attachment, boxwrench 16-17, hexwrench M4,
hexwrench M5, shoulder harness, engine oil set 80cc, starter
rope, spark plug, and accessory bag
Part No. EBH253L.
SPECIFICATIONS
Cutting Width: 16”
Overall Length: 69¾”
•Compliant with EPA phase 2, EU stage 2 exhaust emissions
regulations
•Wide trigger control and soft grip for comfortable operation
•Primer bulb and choke for easy starting
•Durable nylon string trimmer head
Includes: protector assy, protector, trimmer head, band assembly, socket wrench M5, tool kit, and spark plug
Part No. EM2600L.
SPECIFICATIONS
Cutting Width: 9”
Displacement: 25.7cc
Overall Length: 69¾”
32 cc. CHAINSAW
35 cc CHAINSAW
SPECIFICATIONS
Displacement: 32 cc.
Chain Pitch / Gauge: 3/8” / .050”
Maximum Engine Speed: 12,800 RPM
Power Rating: 1.35 kW / 1.8 H.P.
Fuel / Oil mixture: 50:1
Fuel Tank Capacity: 400 ml
Oil Tank Capacity: 280 ml
Net Weight: Dry w/O/Bar/Chain: 9.4 lbs.
SPECIFICATIONS
Chain Pitch / Gauge: 3/8” / .050”
Max. Engine Speed: 13,100 RPM
Vibration Level: 530 m/s2
Net Weight Dry w/o Bar/Chain: 9.9 lbs
•16” Bar
•Touch and stop switch automatically returns switch to start
position, eliminating carburetor flooding
•Intelligent ignition coil controls stable idling, increases output
power, protects against engine overrun and enables easier
restarting
•Toolless chain tension adjustment for quick and easy adjustment on the jobsite
•Throttle-lock start position
•External access holes allow easy carburetor adjustment
•Primer pump for easy starting
•Automatic chain oiler
•Inertia chain brake
Includes: 16” guide bar, 16” chain, chain cover 16”), universal
wrench, screwdriver, spark plug, and starter rope
Part No. EA3201S40B.
•16” Bar
•Touch & stop switch automatically returns switch to start position, eliminating carburetor flooding
•Intelligent ignition coil controls stable idling, increases output
power, protects against engine overrun and enables easier
restarting
•Toolless chain tension adjustment for quick and easy adjustment on the jobsite
Includes: 16” guide bar, 16” chain, chain cover, and universal
wrench
Part No. EA3501S40B.
MAKITA
MAK/2704
43 cc 2 STROKE CHAINSAW
•18” Bar
•Touch & stop switch automatically returns switch to start position, eliminating carburetor flooding
•Catalytic converter reduces engine emissions for reduced
environmental impact
•Throttle-lock start position with decompression valve for
reduced start up force
Includes: .325” Chain 18” 50g, 18” sprocket nose bar, chain
protector cover, universal wrench, offset screwdriver, and
screwdriver (for carburetor adjustment)
Part No. EA4300F45C.
SPECIFICATIONS
Chain Pitch / Gauge: .325” / .050”
Maximum Engine Speed: 13,500 RPM
Power Rating : 2.1kW / 2.9 H.P
Fuel / Oil Mixture (Makita Oil): 50:1
Dry Weight w/o Bar/Chain: 10.8 lbs
50 cc. CHAINSAW
•18” Bar
•Electronic ignition
•Large diameter fuel / oil caps with external fuel indicator
•Handles and grips proportioned for optimum comfort
Includes: 18” chain,18” guide bar, chain cover, and tool kit
Part No. DCS5121-18.
SPECIFICATIONS
Chain Pitch / Gauge: .325” / .058”
Fuel / Oil MixtureL 50:1
Net Weight Dry w/o Bar/Chain: 12.1 lbs
64 cc. CHAINSAW
•20” Bar
•Throttle-lock start position with decompression valve
•Automatic adjustable chain oiler
•Electronic ignition system incorporates a microprocessor
Includes: 20” chain,20” guide bar, chain cover, and tool kit
Part No. DCS6421-20.
SPECIFICATIONS
Chain Pitch / Gauge: 3/8” / . 058”
Net Weight: Dry w/o Bar/Chain: 13.9 lbs
73 cc 2 STROKE CHAINSAW
•20” Bar
•Scavenging losses rejection (slr) muffler recycles exhaust emissions for increased operational efficiency and cleaner emissions
•Throttle-lock start position with decompression valve for reduced start up force
Includes: 20” chain, 20” guide bar, chain cover, and tool kit
Part No. EA7300P50E.
SPECIFICATIONS
Displacement: 72.6 cc.
Chain Pitch / Gauge: 3/8” / . 058”
Net Weight: Dry w/o Bar/Chain: 13.8 lbs
MR. HEATER®
EEE/1749
Forced Air Propane Heaters
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Air Heater comes with a standard 10 ft. hose, regulator and all the safety you would
expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these
heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20 lb. propane tank or larger, and you are ready to
take the chill out of any job. All heaters come equipped with Quite Burner Technology™. QBT heaters are quieter than standard propane heaters by as much
as 50%. Typical uses include: construction sites, patios, factories, sporting events, utility and out buildings, and farming functions. CSA certified.
•35,000 BTU/Hr. •Heats approximately 800 sq. ft. •Runs up to 12
hours on 20 lb. tank (not included)
•Piezo ignition
Part No. MH38QFA.
•30,000 - 60,000 BTU/Hr. •Heats approximately 1,250 sq. ft. •Runs up to
14 hours on 20 lb. tank - low setting
(not included) •Continuous ignition
Part No. MH60QFAV.
•50,000 - 85,000 BTU/Hr. •Heats
approximately 2,000 sq. ft. •Runs up
to 8 hours on 20 lb. tank - low setting
(not included) •Continuous ignition
Part No. MH85QFAV.
•75,000 - 125,000 BTU/Hr. •Heats
approximately 3,000 sq. ft. •Runs
up to 11 hours on 40 lb. tank - low
setting (not included) •Continuous
ignition
Part No. MH125QFAV.
•125,000 - 170,000 BTU/Hr. •Heats
approximately 4,000 sq. ft. •Runs up
to 17 hours on 100 lb. tank - low setting (not included) •Automatic solid
state ignition •Thermostat
Part No. MH170QFAVT.
NORTON
NRN/1549
Diamond Tools and Accessories
HIGH-SPEED CP-500 SERIES SAWS
The Norton Clipper CP500 high-speed cut-off saw is destined to be an asset on any crew. It’s fully designed with the user
in mind to not only cut a smooth, fast track, but it’s also fully equipped to handle the everyday performance of any jobsite
with unrelenting durability and reliability. Select a standard model or upgrade to the world’s first patented automatic
lubrication system, iLube®.
Features:
No More Pre-Mixing Oil and Fuel
The patented iLube® option automatically
controls mixing of oil and fuel for maximum efficiency. An electronic sensor will
indicate a low oil level and adjust the
engine to idle to prevent engine damage.
Easy Start – Hot or Cold
The electronic carburetor’s electromagnetic valve
eliminates the standard choke and half throttle start.
The 3-step easy start eliminates the hassle of a choke.
Simply turn the switch on, prime the engine, and push
the decompression button, then pull the cord to start.
Technical Specifications Part No.
47559 Blade Guard Capacity
12” (305 mm) Maximum Depth of Cut
4” (100 mm) Arbor Size
.78 (20 mm)
Blade Flange Diameter
3.93 (100 mm)
Blade Shaft RPM
4,500
Blade Shaft Bearings
Heavy Duty Sealed
Blade Shaft Drive
1 Belt
Control Hand Held
Chassis Norton Single-Cylinder Two Stroke Engine
Power Source Single Cylinder 2 Cycle Motor/Engine Type Norton Clipper
Specifications:
CP512-300 5.4 HP (4.0 kW)
Maximum Horsepower*
5.4 HP (4.0 kW)
Net Horsepower*
Max. Torque 3.54 ft lbs (4.8 Nm)
Displacement
4.94 cu in (81 l)
Bore
2.04” (52 mm) Stroke
1.49” (38 mm)
Cylinders/Cycle Single Cylinder 2 Cycle
Fuel Capacity
0.23 gal (0.9 l) Oil Capacity
-
Electronically-Controlled Oil Lubrication -
Air Filter Heavy Duty 3 Stage
Starter Manual Engine Cooling Forced Air Electronically-Controlled Carburettor With Smart Choke YES “Sound Level2,3 Lpeg
(EN ISO 19432 Annex B) dB(A)”
98 Sound Power Level2,3 Lweg
(EN ISO 19432 Annex B) dB(A) 108 “Weighted Effective Acceleration 2,4 ahv,eq
(EN ISO 19432 Annex C) Rear Handle / Top Handle m/s²” 4.5 / 6.0 Saw Dimensions
Height
16.93” (430 mm) Saw Width 10.52” (267 mm) Maximum Saw Length (Working) 29.53” (750 mm) Weight
22.26 lbs (10.1 kg) *Data provided by motor/engine manufacturer
Accessories
Part No. 09845, High-Speed Saw Wheel Kit.
Multi-Stage Air Filtration
Patented twin-air inlets create an air pulsation that
draws fresh air in while pushing hot air away from
the engine and releasing it out the back to keep
the saw running cool and reduce
debris being trapped in the filter. The
external rocker wheel vibrates the
filter to further help release debris.
This system extends filter life for less
cleaning/replacement.
47561 12” (305 mm) 4” (100 mm) .78 (20 mm)
3.93 (100 mm)
4,500
Heavy Duty Sealed
1 Belt
Hand Held
Norton Single-Cylinder Two Stroke Engine
Single Cylinder 2 Cycle w/iLube Norton Clipper
CP512-300i 5.4 HP (4.0 kW)
5.4 HP (4.0 kW)
3.54 ft lbs (4.8 Nm)
4.94 cu in (81 l)
2.04” (52 mm)
1.49” (38 mm)
Single Cylinder 2 Cycle
0.23 gal (0.9 l) 10.08 oz (0.32 l) YES Heavy Duty 3 Stage
Manual Forced Air YES 47563 14” (356 mm) 5” (125 mm) .78 (20 mm)
3.93 (100 mm)
4,500
Heavy Duty Sealed
1 Belt
Hand Held
Norton Single-Cylinder
Two Stroke Engine
Single Cylinder 2 Cycle Norton Clipper
CP514-350 5.4 HP (4.0 kW)
5.4 HP (4.0 kW)
3.54 ft lbs (4.8 Nm)
4.94 cu in (81 l)
2.04” (52 mm)
1.49” (38 mm)
0.23 gal (0.9 l) -
-
Heavy Duty 3 Stage Manual Forced Air YES 47565
14” (356 mm)
5” (125 mm)
.78 (20 mm)
3.93 (100 mm)
4,500
Heavy Duty Sealed
1 Belt
Hand Held
Norton Single-Cylinder
Two Stroke Engine
Single Cylinder 2 Cycle w/iLube
Norton Clipper
CP514-350i
5.4 HP (4.0 kW)
5.4 HP (4.0 kW)
3.54 ft lbs (4.8 Nm)
4.94 cu in (81 l)
2.04” (52 mm)
1.49” (38 mm)
0.23 gal (0.9 l)
10.08 oz (0.32 l)
YES
Heavy Duty 3 Stage
Manual
Forced Air
YES
98 98 98
108 108 108
4.5 / 6.0 4.5 / 6.0 4.5 / 6.0
16.93” (430 mm) 10.52” (267 mm) 29.53” (750 mm) 22.92 lbs (10.4 kg) 16.93” (430 mm) 10.52” (267 mm) 30.52” (775 mm) 22.49 lbs (10.2 kg) 16.93” (430 mm)
10.52” (267 mm)
30.52” (775 mm)
23.15 lbs (10.5 kg)
NORTON
NRN/1549
WALK BEHIND C13PE GASOLINE SMALL PUSH SAW
Rental equipment has to withstand any
and all conditions by user and application. For that reason, the Norton Clipper
C13PE suits any rental fleet that both
the novice and expert will appreciate to
hold-up through tough situations. The
18” blade guard, ride-on water system
and quick-release blade guard lock
keeps safety in mind while the rugged
frame, powerful engine and easy-to-use
console makes cutting a breeze.
Features:
Fast Release Guard
The quick release pull pin
keeps the blade guard
locked down for safety during
operation. No more jam nuts
or tools needed - just pull
and lift.
The next generation of 13HP saws. The C1318P
features shock-absorbing handle bars. The new sleek
design of the water tank, with increased capacity and
improved securing, adds an additional 1.5 gallons
of water over the cut. And, a newly-designed belt
tensioning system helps keep the saw cutting tried and
true. All these features, coupled with the Honda 13HP
engine, makes the C1318P the premiere choice for
rental and service work.
Tough Frame and Raised Axle
Thick, heavy-duty gauge metal
frame endures the hardest of
users and job sites. Resists
twisting for a tried and true
straight cut.
Blade Guard Capacity
Maximum Depth of Cut
Arbor Size
Blade Shaft RPM
Blade Shaft Diameter
Blade Shaft Bearings Blade Shaft Drive Blade Guard Attachment Blade Control Axle - Front
Axle - Rear
Wheels - Front - D x W x B Wheels - Rear - D x W x B Power Source Motor/Engine Type Specifications Maximum Horsepower* Net Horse Power*
Displacement
Bore
Stroke
Cylinders/Cycle Fuel Capacity
Oil Capacity
Air Filter Starter Engine Cooling Saw Dimensions
Height - in (mm) Minimum Saw Length (Transport) Maximum Saw Length (Working)
Maximum Pointer Length
Frame Width
Saw Width
Front (Outside to Outside Wheel Width)
Rear (Outside to Outside Wheel Width)
Blade to Wall Wheel Base Length
Tool Weight
*Data provided by motor/engine manufacturer
WALK BEHIND C1318P
GASOLINE SMALL PUSH SAW
Uncomplicated Control Panel
Everything at your fingertips
to manage the saw with ease:
depth locking mechanism,
emergency shut off and water
valve within easy reach.
Features:
Vibration Reducing Handle Bars
Shock-absorbing handle bars
reduce vibrations up to 40%.
Quick Belt Tensioning
Provides fast and accurate
belt tensioning.
47524
18” (457 mm)
Arbor Size
6-5/8” (168 mm)
1” (25 mm)
Blade Shaft RPM 4½” (114 mm)
Blade Shaft Diameter
2,700
Blade Shaft Bearings 1.00” (25.4 mm)
Blade Shaft Drive Heavy Duty Pillow Block
Blade Guard Attachment
3 Belts
Blade Control Hinged, All Steel
Axle – Front
Hand Wheel/Screw Feed
Axle – Rear .75” (19 mm)
Wheels – Front - D x W x B
.75” (19 mm)
4” x 1.5” x .75” (102 mm x 38 mm x 19 mm) Wheels – Rear - D x W x B 8” x 2.50” x .75” (203 mm x 64 mm x 19 mm) Handle Bars/Adjustment Length Control Gasoline, Single Cylinder 4 Cycle
Speed Honda GX390
Chassis
GX390K1QXC9
13 HP (9.5 kW)
Power Source 11 HP (8.2 kW)
Engine Type 23.7 cu in (0.39 l)
Specifications 3.5” (88 mm)
Maximum Horsepower* 2.5” (64 mm)
Net Horsepower* Single Cylinder 4 Cycle
Displacement 1.79 gal. (6.5 l)
Bore 1.16 qt. (1.1 l)
Stroke Four Stage Cyclone
Cylinders/Cycle Manual
Fuel Capacity Forced Air
Oil Capacity
Air Filter 38-13/16” (986 mm)
Starter 42¾” (1086 mm)
Engine Cooling 63” (1600 mm)
Saw Dimensions
20” (508 mm)
Height 16½” (419 mm)
Minimum Saw Length (Transport)
21-27/64” (544 mm)
Maximum Saw Length (Working)
14-17/32” (369 mm)
19-9/32” (490 mm)
Frame Width
1-23/32” (44 mm)
Saw Width
15¾” (400 mm)
220 lbs (100 kg)
Blade to Wall
Wheel Base Length
Tool Weight
Fast Blade Guard Lock
No hassle, blade guard
securing lock.
42453
18” (457 mm)
6-5/8” (168 mm)
1” (25 mm)
4½” (114 mm)
2,573
1.18” (30 mm)
Heavy Duty Pillow Block
Single 10 Groove Belt
Hinged, All Steel
Hand Wheel/Screw Feed
.78” (20 mm)
.78” (20 mm)
4.92” x 1.96 x .78 (125 mm x 50 mm x 20 mm)
8” x 1¼” x .78 (203 mm x 32 mm x 20 mm)
6¼” (160 mm)
5.28 gal. (20 l)
Push
Heavy Duty Steel Box with Longitudinal
and Horizontal Reinforcements
Gasoline, Single Cylinder 4 Cycle
Honda GX390
GX390K1QXC9
13 HP (9.5kW)
11 HP (8.2 kW)
23.7 cu in (0.39 l)
3.5” (88 mm)
2.5” (64 mm)
1.79 gal. (6.5 l)
1.16 qt. (1.1 l)
Four Stage Cyclone
Manual
Forced Air
39” (990 mm)
33½” (850 mm)
61½” (1,562 mm)
20-7/8” (528 mm)
16½” (421 mm)
22” (609 mm)
10-7/16” (265 mm)
16.89” (429 mm)
4½” (114 mm)
13” (332 mm)
220 lbs (100 kg)
NORTON
NRN/1546/1549
WALK BEHIND GC55 EARLY ENTRY / GREEN SMALL PUSH SAW
With a compact, light-weight design backed by the reliable Honda 5.5 HP gasoline engine, the GC55 early entry saw is intended for a variety
of applications. From green, cured or decorative concrete cutting to expansion joints, the features of this small push saw are hard to beat in a
single saw. The low, wide profile of the frame, along with the front mount blade, contribute to producing a more disciplined cut.
Features:
Gasoline Engine
Mounted with the dependable Honda
5.5 HP engine for best performance.
Blade Guard Capacity Maximum Depth of Cut Arbor Size
Blade Flange Diameter Blade Shaft RPM Blade Shaft Diameter
Blade Shaft Bearings Blade Shaft Drive Blade Guard Attachment Blade Control Axle – Front
Axle – Rear
Wheels – Front – D x W x B Wheels – Rear – D x W x B Handle Bars/Adjustment Length Control Chassis Power Source Motor/Engine Type Specifications Maximum Horsepower Net Horse Power Displacement
Bore
Stroke
Cylinders/Cycle Fuel Capacity
Oil Capacity
Air Filter Starter Engine Cooling Saw Dimensions
Height
Minimum Saw Length (Transport) Maximum Saw Length (Working)
Frame Width
Saw Width
Blade to Wall
Wheel Base Length
Tool Weight
Front Blade Mount
Additional weight helps keep
the blade in the cut.
Improved Wheel Design
Stable cutting over debris to help
keep the saw in line of cut.
30005
10” (254 mm)
3¾” (95 mm)
5/8” (15.9 mm)
3-5/64” (78 mm)
3,000
7/8” (20 mm)
Sealed Radial Bearings
1 Cogged
All Steel
Screw Feed
55/64” (22 mm)
55/64” (22 mm)
3-3/8” x 2¾” x 25/32” (85 mm x 70 mm x 20 mm)
3-3/8” x 2¾” x 25/32” (85 mm x 70 mm x 20 mm)
6” (152.4 mm)
Push
Heavy Duty Stamped Steel with Reinforcements
Honda GX160
GX160K1QXC9
5.5 HP (4.1 kW) – *
4.8 HP (3.6 kW) – *
9.9 cu in (0.16 l)
2.7” (68 mm)
1.8” (45 mm)
.95 gal (3.6 l)
.63 qt (.6 l)
Four Stage Cyclone
Manual
Forced Air
24-7/32” (615 mm)
32” (813 mm)
42-29/32” (1,090 mm)
8-7/32” (209 mm)
13-11/16” (348 mm)
18-1/8” (460 mm)
8-21/32” (220 mm)
13” (330 mm)
7½” (190)
19” (483 mm)
115 lbs (52 kg)
*= Data Provided by Motor/Engine Manufacturer
Fold-Down Design
Easy storage and transport.
GMAX – MULTI - PURPOSE BLADES DRY – GREEN/CURED CONCRETE WALK
BEHIND BLADES
Designed specifically for the #30005 down-cut green concrete
push saw, the GMAX Multi-Purpose blade is excellent in both
green and cured concrete. The unique segment specification
and anchor slot gullet allows this blade to be used in a variety
of applications with outstanding results.
Part No.
83758 75125
84508 Size
Max RPM
8 x .095 x 7/8-5/8 8,730 9 x .110 x 7/8-5/8 6,600 10 x .110 x 1-7/8-5/8 6,115 Segment
Height
.295”
.295”
.295”
NORTON
NRN/1549
BBM BLOCKBUSTER MINI MASONRY SAWS
The innovative design of these small masonry saws has been copied many times due to its compact, all-steel unibody construction,
giving the best weight-to-strength distribution. A 14” blade capacity and ergonomically-designed, three-position locking, cutting head
provides a safe, clear view of the work area. Whether your choice is the 3 HP brush motor or the 1.5 HP induction motor for heavier
commercial use, both come with features such as overload protection, garden hose connection and a channeled, flow water pan to direct
dust and slurry away from the operator. Norton diamond blade included with saw .
Features:
All Steel Construction
All welded strong honeycomb
reinforcement design.
Blade Guard Capacity Maximum Depth of Cut Arbor Size Blade Flange Diameter
Blade Shaft RPM Blade Shaft Bearings Blade Shaft Drive Blade Guard Attachment Conveyor Cart Water Pump Frame Power Source Motor/Engine Type Specifications Net Horsepower Voltage Cycle/Current/Phase Full Load Amps Engine Cooling Air Filter Saw Dimensions
Saw Length Saw Width
Saw Height
Maximum Arbor Height Over Table
Cart Length
Cart Width Pan Length
Pan Width
Tool Weight
Pivoting Locking Head
Plunge/step cutting and jam
cutting (all the way down).
Clear View Cutting System
Offset of motor and blade allows
operator to see the complete
cutting surface.
Wet or Dry Cutting
Quick attach garden hose
water system.
00684 14” (355 mm) 5” (127 mm) 1” (25 mm) 4” (100 mm) 3,600 Sealed Radial Bearings Gear Drive All Steel, Pivoting Posi-Loc Cutting Head Aluminum With Steel Wheels and Seal Bearings Optional Steel Reinforced Frame Electrical AC Universal Motor Carbon Brush, Thermal Protection 3 HP 115 volts 60Hz/AC/1 10 Amps Forced Air Yes 26327
14” (355 mm)
5” (127 mm)
1” (25 mm)
4” (100 mm)
2,800
Sealed Radial Bearings
Belt Drive
All Steel, Pivoting Cutting Head
Aluminum With Steel Wheels and Seal Bearings
Optional
Steel Reinforced Frame
Electrical
Induction
T.E.F.C., Thermal Protection
2 HP
115/230 volts
60Hz/AC/1
15 Amps
Forced Air
-
31½” (800 mm) 18” (470 mm) 30” (762 mm) 15-1/16” (383 mm) 10-7/16” (265 mm) 16-17/32” (420 mm) 30-1/8” (765 mm) 16” (405 mm) 75 lbs (34 kg) 31½” (800 mm)
18” (470 mm)
27¾” (695 mm)
16-17/32” (420 mm)
10-7/16” (265 mm)
16-17/32” (420 mm)
30-1/8” (765 mm)
16” (405 mm)
123.2 lbs (56 kg)
Accessories
Part No. 00704, Wet Kit.
Part No. 00691, Stand.
NORTON
NRN/1549
CTC1020XL TILE SAW
Built with the professional in mind, the CTC1020XL is
the newest to the tile industry. The powerful 2 HP motor
makes ripping materials, up to 24”, trouble-free. The
combination of having a light-weight, sturdy frame and
a newly designed polypropylene pan, to help
reduce area contamination, gives an
operator all the essentials to get the
job done quickly and efficiently.
Norton diamond blade included with saw .
CTC705 TILE SAW
A great value for a 7” tile saw that can handle the small to medium size
jobs. This saw has many features of more expensive tile saws, like a
belt-driven 1 HP motor for maximum motor-to-blade power. A sturdy
aluminum cutting table with anti-skid top for keeping material in place
while cutting and a light-weight water pan for easy cleaning and/or
single operator use getting on and off the site.
Norton diamond blade included with saw .
Features:
Features:
2 HP Motor
More powerful than using
conventional 1.5 HP and
can make a rip cut of
24” tile.
Light-Weight
60 lbs vs. standard
100-125 lbs for
easier transportation.
Aluminum Rails with Stainless Insert
Provides long life
and easy portability
due to low coefficient
of friction, creating
smoother slide.
Blade Flange Diameter Blade Shaft RPM Maximum Material Size
Rip Cut Size
Diagonal Size Cut Depth Cutting Head Built-In 45° Miter Cut Cutting Table Water Pump Power Source Motor/Engine Type Maximum Horsepower Voltage Cycle/Current/Phase Full Load Amps Saw Dimensions
Saw Length Saw Width Saw Height
Saw Height With Stand Arbor to Top of Cart Cart (Table) Length
Cart (Table) Width Cart Travel
Pan Length
Pan Width
Tool Weight
Upgraded Backsplash Pan
Catches water on
larger tile/block cutting
and easily detaches.
30013
10” (254 mm)
3¾” (88 mm)
5/8” (16 mm)
3 (78 mm)
3,000
24” x 24” (610 mm x 610 mm)
24” (610 mm)
18” (457 mm)
3¾” (95 mm)
Cast Aluminum
NO, Includes Miter Block
Aluminum With Rubber Coating
YES
Electric
Brush Motor with Thermal Protection
2 HP
115 volt
60 Hz/AC/1
8 Amp
51-7/8” (1,318 mm)
25-3/16” (640 mm)
20-7/8” (530 mm)
41-13/16” (1,240 mm)
4¾” (120 mm)
16” (406 mm)
16-9/64” (410 mm)
22-5/8” (575 mm)
51-7/8” (1,318 mm)
25-3/16” (640 mm)
65 lbs (29.5 kg)
Accessories
Part No. 43045, Premium Stand w/Work Table.
Motor Upgrade
Strong belt-driven 1 HP
motor provides powerful
and precise cutting.
Light-Weight Conveyor
Smooth slide creates straight cuts
and has a locking mechanism for
easier transportation.
Water Pump
High intake and output to
keep fresh water in pan
with a durable filter to
keep debris out.
Blade Shaft RPM Maximum Material Size
Rip Cut Size
Diagonal Size
Cut Depth
Cutting Head Built-In 45° Miter Cut Cutting Table Water Pump Power Source Motor/Engine Type Maximum Horsepower Voltage Cycle/Current/Phase Full Load Amps Saw Dimensions
Saw Length
Saw Width
Saw Height Saw Height With Stand Arbor to Top of Cart
Cart (Table) Length
Cart (Table) Width Cart Travel Pan Length Tool Weight
81496
7” (177 mm)
2¼” (57 mm)
5/8” (16 mm)
2½” (66 mm)
6,000
17” (431 mm)
17” (431 mm)
12” (305 mm)
1¾” (44.5 mm)
Cast Aluminum
No
Aluminum
Yes
Electric
Carbon Brush
1 HP
115 volt
60 Hz/AC/1
10 Amps
30” (762 mm)
19¾” (502 mm)
17½” (445 mm)
47¾” (1,213 mm)
Adjustable
14¼” (362 mm)
15” (381 mm)
18¾” (477 mm)
30” (762 mm)
43 lbs (19.5 kg)
Accessories
Part No. 43045, Premium Stand w/Work Table.
NORTON
NRN/1549
CTC701 TILE SAW
DR620 CORE DRILL RIG
The simple design of the tabletop tile saw features
a powerful professional motor that veterans and
novices alike will enjoy operating. Its solid construction incorporates a self-contained water pan with
plug release, tilting table for miter cuts and a fast,
precise lockable cutting guide. The robust carrying
case allows for easy transportation or storage while
protecting the unit
Features:
Built-In Water Pan
Single unit design with optimized
water recycling.
The Norton Clipper DR series of core drills offer a versatile drill rig with
exceptional utility to meet the tough demands of today’s rental and contractor
industry. The basic design of the carriage and pinion assembly provides a
simple trouble-free system to extend service life in the rental fleet. The DR620
drill rig stand offers the additional utility of a pivoting column for drilling vertically on a sloping surface.
Features:
Vacuum Pump
Superior stabilization.
Chrome Steel Tilting Table
Convenient for miter cutting
of 0-45º cuts with a tilt
design to allow for quicker
blade changes.
Quick Locking Rip Guide
Secures guide position for precise cuts.
Wheel Attachment
Ease of transporting
around job site.
Ceiling Jack
Extending ceiling jack
for indoor drilling.
Arbor Size Blade Flange Diameter
Blade Shaft RPM Cut Depth
Cutting Head Built-In 45° Miter Cut Cutting Table Water Pump Power Source Motor/Engine Type Maximum Horsepower Voltage Cycle/Current/Phase Full Load Amps Saw Dimensions
Saw Length
Saw Width
Saw Height
Tool Weight
30029
7” (177 mm)
2¼” (57 mm)
5/8” (16 mm)
3 (78 mm)
2,990
1-9/16” (40 mm)
Steel
YES
Chrome Steel
Blade Rotates In Water Pan
Electric
T.E.F.C.
1.5 HP
115 volt
60 Hz/AC/1
7 Amps
18.11” (460 mm)
14.17” (360 mm)
11-7/16” (290 mm)
35 lbs (15.9 kg)
Gears
Motor Type Motor Specification Voltage Cycle/Current/Phase Amperage RPM Spindle Thread Size Base – Combo – L x W
Column Length
Slide Carriage Wheel Base (outside to outside) Wheels (D x W x B)
Vacuum Pump Control Panel Tool Weight
Recommended Bit Sizes
Low High 00926
2
Cardi
D3-250-EL
115 volts
60 Hz/AC/1
25 Amp
450/900
1¼”-7 UNC
18-7/8” x 13¾” (450 mm x 350 mm)
40” (1,016 mm)
One Piece Aluminum Carriage, Rack and Pinion, Carriage Lock, and Quick Detach Motor Mount Dove Tail
15½” (394 mm)
6” x 1-3/8” x 3/4” (152 mm x 35 mm x 19 mm)
YES
YES
120 lbs (54.4 kg)
6” to 10” (152 mm to 305 mm)
2” to 6” (50 mm to 152 mm)
HHDET 1800 HAND-HELD CORE DRILL
A light-weight and user-friendly core drill. With its “Smart Electronics”motor protection from Cardi means no overheating
of electrical parts. The powerful 15 amp motor drives core bits up to 4” with ease. The hand-held core drill has a singlespeed gear box and mechanical safety clutch. Packaged in a rugged carrying case to protect the drill during transport.
Technical Specifications
Part No.
84243
Gears 1
Motor Type Electric
Voltage 115 volts
Cycle/Current/Phase 60Hz/AC/1
Amperage
15 Amps
RPM (No Load) 940
Smart Electronics YES
Weight Crated
18 lbs (8.1 kg)
Weight Uncrated 12 lbs (5.4 kg)
Recommended Bit Sizes
Low
2” to 4” (50 mm to 102 mm)
Features:
Smart Electronics Protection
No over-heating of electrical
components.
Water Attachment and Accessories
1¼-7 Male with 5/8-11 adapter and
quick attach water accessories for
wet drilling.
Rugged Carrying Case
Protects unit and accessories
from damage.
NORTON
NRN/1546
High Speed Diamond Blades
MULTI-PURPOSE, ALL MATERIALS BLADES - DRY - SEGMENTED RIM
Used for: Concrete, reinforced concrete, granite, building materials, thin steel sections, angle iron up to 1/2” material thickness, rebar up to no. 5.
4X4 MAX CUT BLADES
Taking high-speed cutting versatility to an all new level. The same standard features as the
4X4 with its anti-crack gullets and patented depth indicators that not only cool the blade but also
allow the operator to know how deep they are cutting. An all new bond
and diamond specification improves blade life in a wide range of
materials while excelling in steel. New segment wear indicators
give the operator an idea of remaining blade life.
Part No.
45927 45926 Size
Max RPM
12 x .118 x 1/20 mm 6,300
14 x .125 x 1/20 mm 5,460 3X3 BLADES
It’s everything expected for high-speed cutting when both performance and price are a factor.
The laser welded 3X3 cuts concrete, reinforced concrete, asphalt, abrasive
building materials and more. High quality diamond increases the
speed of cut on a variety of materials without changing blades.
Premium blade characteristics and price point where it would
take multiple sintered blades to achieve.
Segment
Height
.472”
.472”
Part No.
47500 47499 Size
Max RPM
12 x .118 x 1/20 mm 6,300 14 x .118 x 1/20 mm 5,460 Segment
Height
.314”
.314”
ASPHALT AND ABRASIVE MATERIALS BLADES - DRY - SEGMENTED RIM
Used for: Asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials.
DUO ASPHALT BLADES
Dry cutting laser welded blade for asphalt and green concrete.
Laser welded drop segment wear-retardant extends blade life.
Scoop gullets for faster swarf removal increases cut speed.
Stroboscopic indicators to control cut depth and show rotation
direction.
Segment
Size
Part No.
Max RPM
Height
84543 12 x .110 x 1/20 mm 6,300 .393”
84315 14 x .125 x 1/20 mm 5,460 .393”
NORTON CLASSIC BLADE
Ideal blade for small to medium size high-speed cutting jobs.
Economically priced with good productivity in asphalt, green
concrete and other abrasive materials.
NATURAL STONE & TILE BLADES - DRY - TURBO RIM
GENERAL PURPOSE & MASONRY BUILDING MATERIALS
BLADES - DRY - SEGMENTED RIM
Ceramic and stone tiles, granite, marble, very hard bricks and other very hard and dense
materials.
AERO-JET BLADES
Very fast, smooth cutting. The .590” high segment rim adds
extremely long life whether cutting wet or dry in hard materials.
Exclusive arrow shape protection inserts for precision straight
cuts. A ventilated waved steel core for better cooling and intensive use. Exceptional cutting on a very wide range of materials
with a high quality finished cut.
Segment
Size
Part No.
Max RPM
Height
83785 14 x .125 x 1/20 mm 5,460 .472”
Part No.
01231 Size
Max RPM
14 x .125 x 1/20 mm 5,460 Segment
Height
.275”
Blocks, medium-hard building bricks, paving slabs, concrete roof tiles and other medium-hard
materials.
VALUPLUS BLADES
For value and performance on small to medium size jobs. The
sintered blade cuts unreinforced soft to medium concrete fast
on saws up to 13 HP.
Part No.
84180
84428 Size
Max RPM
12 x .110 x 1/20 mm 6,300 14 x .110 x 1/20 mm 5,460 Segment
Height
.393”
.393”
RESCUE, DEMOLITION BLADES - DRY - CONTINUOUS RIM
Ductile, steel, polyvinyl pipe, thin steel plate, acrylic sheet, fiberglass, rubber, standard glass, wood, concrete, brick, asphalt.
RESCUE RUNNER BLADES
When seconds count, reach for the Norton Rescue Runner. The specially tempered steel core provides maximum durability under the toughest
conditions on many materials. A new diamond placement technology allows diamonds to cut in both directions for quick cutting.
Features:
•Bidirectional Blade Usage - The symmetrical diamond pattern placement allows the quick blade mounting without worry of proper direction.
•Universal Arbor - The universal arbor allows the Rescue Runner to be used on both 1” and 20 mm high-speed gas and electric saws.
•Faster Cutting and Longer Life - The bonding system allows the diamond to resist premature release providing longer diamond life and speed of cut.
Segment
Size
Part No.
Max RPM
Height
84426 12 x .140 x 1/20 mm 6,300
.275”
84361 14 x .140 x 1/20 mm 5,460
.275”
Masonry Diamond Blades
- WET - SEGMENTED RIM
materials.
CHARGER BLADES
High performance wet cutting with an extra wide .263” segment specification that allows thorough cleaning and extended life in a variety of materials.
Part No.
Size
Max RPM
81338 14 x .100 x 1 4,365 Segment
Height
.263”
NORTON
NRN/1546
Walk Behind Diamond Blades
ASPHALT & ABRASIVE MATERIALS
Asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials.
NORTON CLASSIC BLADES - WET - ASPHALT
An economical choice for fast cutting and good life when performing
jobs in a variety of abrasive materials such as green concrete and
asphalt on saws up to 35 HP.
Segment
Size
Max RPM
Part No.
Height
81376
18 x .125 x 1 3,395 .326”
CHARGER BLADES - DRY - GREEN CONCRETE
A high performance, laser welded blade designed for green
concrete cutting. High quality segments produce a clean cut
with reduced spalling on larger saws up to 20 HP in early entry
applications.
Segment
Size
Max RPM
Part No.
Height
81420
14 x .125 x 1 4,365 .263”
REINFORCED CONCRETE & HARDER BUILDING MATERIALS - WET
Reinforced concrete, hard bricks, limestone, terrazzo, and other hard materials
CHARGER BLADES - HARD AGGREGATES
High performance wet cutting hard aggregates with medium
reinforcement. The increased diamond depth in the segment
specification allows extended life and fast cut for medium to
large jobs. Deep sawing is easily achieved on saws up to 35
HP.
Part No.
Size
Max RPM
81471 26 x .155 x 1 2,350 NORTON CLASSIC BLADES - MEDIUM AGGREGATES
Laser welded blade at an economical price for general purpose
cutting of cured concrete, medium hard aggregate and no steel
reinforcement.
The bond and diamond combination allow fast cutting action on
limited horse powered flat saws.
Segment
Height
.410”
Part No.
Size
Max RPM
81361 18 x .125 x 1 3,395 Segment
Height
.326”
MULTI-PURPOSE, ALL MATERIALS - DRY - MULTI PURPOSE
Concrete, reinforced concrete, granite, building materials, thin steel sections, angle iron up to 1/2”
material thickness, rebar up to no. 5.
4X4 BLADES
Multi-purpose laser welded blade for dry cutting a range of construction materials without sacrificing
performance or price. Depth of cut is easily controlled with the patented depth-of-cut indicators cut
into the steel core. Anti-crack gullets for enhanced safety cutting steel and metal (up to 5 mm thick).
Part No.
84548 84547
45306 Segment
Height
12 x .110 x 1/20 mm 6,300 .393”
14 x .125 x 1/20 mm 5,460 .393”
16 x .125 x 1/20 mm 4,500
.393”
Size
Max RPM
Tile Diamond Blades
NATURAL STONE & TILES - WET - CONTINUOUS RIM
Ceramic and stone tiles, granite, marble, very hard bricks and other very hard and dense materials.
SLICER BLADES
Razor-like cut, but with high tensile strength steel core for greater accuracy and less wobbling.
The bond and diamond specification enhance cutting speed and improve blade life, particularly
in hard materials for premium performance.
Part No.
Size
Max RPM
84183
84184 84185 7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8 8,730 7,640 6,115 Segment
Height
.393”
.393”
.393”
NORTON CLASSIC BLADES
Excellent quality with good performance in general purpose materials. The right bond and
diamond content allows clean cutting with long use. Well suited for softer tile or stone materials
on low horsepower tile saws.
Part No.
Size
Max RPM
84017
02785 02784 7 x .065 x 5/8 8 x .070 x 5/8 10 x .070 x 5/8 8,730 7,640 6,115
Segment
Height
.393”
.393”
.393”
NORTON
NRN/1546
Portable Hand-Held Diamond Blades
materials.
DUO BLADES - DRY - SEGMENTED RIM
The original DUO. The innovative, exclusive design introduced in 2002 has become a dominant
name in the market. The unique dual segment per land technology provides excellent cutting
speed with low vibration and high comfort of cut. The exclusive arrow shape gullets not only
indicate blade direction but they also assist in fast removal of cutting debris. Maximum performance when cutting hard materials and fiber cement board.
Part No.
84526
84527 84129
Segment
Height
4½ x .086 x 7/8-5/8-20 mm 13,300 .393”
5 x .086 x 7/8-5/8-20 mm 12,000 .393”
7 x .098 x DM-7/8-5/8 8,730 .393”
Size
Max RPM
VALUPLUS BLADES - DRY - SEGMENTED RIM
For value and performance on small to medium size jobs cutting soft abrasive materials like brick
and tile. The sintered rim delivers a quality cut and good life.
Part No.
84098 84099 84100 Segment
Height
4 x .080 x 7/8-5/8-20 mm 15,000 .275”
4½ x .080 x 7/8-5/8-20 mm 13,300 .275”
7 x .090 x DM-7/8-5/8 8,730 .275”
Size
Max RPM
VALUPLUS BLADES - DRY - TURBO RIM
For value and performance on small to medium size jobs cutting soft brick and tile.
The turbo continuous rim cuts fast with a smoother quality of cut.
Part No.
84105 84106 84107 Segment
Height
4 x .080 x 7/8-5/8-20 mm 15,000 .275”
4½ x .080 x 7/8-5/8-20 mm 13,300 .275”
7 x .090 x DM-7/8-5/8 8,730
.275”
Size
Max RPM
NATURAL STONE & TILES - DRY - CONTINUOUS RIM
Ceramic and stone tiles, granite, marble, very hard bricks and other very hard and dense
materials.
VALUPLUS BLADES
A value price point for small to medium size jobs cutting standard
ceramic tile with efficient cutting on low horsepower tile saws.
Part No.
84088 84089 Asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive
materials.
An economical solution for small to medium tuck pointing jobs.
High quality performance for heavy grout removal or mortar
jointing. The heavy duty wide segment reduces wear in abrasive
materials.
Segment
Size
Max RPM
Part No.
Height
81778 5 x .250 x 7/8-5/8-20 mm 12,000 .275”
81779 7 x .250 x 7/8-5/8-20 mm 8,730 .275”
Segment
Height
4½ x .080 x 7/8-5/8-20 mm 13,300 .275”
7 x .090 x DM-7/8-5/8 8,730 .275”
Size
ASPHALT & ABRASIVE MATERIALS - DRY - TUCK
POINTING
Max RPM
REINFORCED CONCRETE & HARDER BUILDING MATERIALS - DRY - CRACK CHASING
Reinforced concrete, hard bricks, limestone, terrazzo, and other hard materials.
CHARGER BLADES
A heavy V-shaped segment designed with a special bond and diamond content for maximum removal of grout,
mortar jointing, crack chasing and crack widening. Fast cutting and long life in abrasive materials using portable
tools. Highly competitive to others of its kind in the market.
Part No.
Size
83856
83859 4 x .375 x 7/8-5/8-20 mm 7 x .375 x 7/8-5/8-20mm
Segment
Height
15,000 .550”
8,730 .550”
Max RPM
Portable Hand-Held Diamond Cup Grinders
GENERAL PURPOSE & MASONRY BUILDING
MATERIALS - DRY - CUP GRINDER
Blocks, medium-hard building bricks, paving slabs, concrete roof tiles and
other medium-hard materials.
Available in a range of sizes and segment designs for optimum performance
by life or by speed. Ideal for levelling all types of masonry materials, brick,
block, concrete and stone. Strategically placed hole designs help ventilate
dust from the surface to extend the life of the cups.
Part No.
Size
Max RPM
Segment
Height
Single Row for Fast Stock Removal
82555
4 x 5/8”-11 15,000 .210”
84036 5 x 5/8”-11 12,225 .210”
82593 7 x 5/8”-11 8,730 .210”
Double Row for Long Life, Smooth Finish
82586 4 x 5/8”-11 15,000 .210”
84038 5 x 5/8”-11 12,225 .210”
82595 7 x 5/8”-11 8,730 .210”
Swirl for Most Aggressive Cut, Smooth Finish
83826 4 x 5/8”-11 15,000 .180”
84040 5 x 5/8”-11 12,225 .180”
83827 7 x 5/8”-11 8,730 .180”
Turbo for Long Life, Very Smooth Finish
83830 4 x 5/8”-11 15,000 .210”
83831 7 x 5/8”-11 8,730 .210”
44801 4½” X 5/8-11 15,000 .196”
44802 7 x 5/8”-11 8,730 .196”
82586
82555
83830
83826
NORTON
NRN/1546/1548
Silencio Diamond Blades
SILENCIO FLAT SAW BLADE
Features & Benefits:
•Specially developed patent pending silent steel-center, cutting edge vibration absorbent material for noise reduction of up to
15 dB(A) than the traditional copper sandwich or laser-cut core blades
•Optimized sound-dampening geometry for elimination of the whistle-effect with a blade guard during operation
•A tall .590” laser welded segment results in longer blade life and faster cut
•Trapezoidal segment shape has lower impacts on materials improving quality of cut similar to a continuous rim blade cut.
•Smoother operating for less operator fatigue and better debris removal from cut improving blade life and free cutting
•New diamond and bond specification created for masonry, flat or high speed hand saw applications is extremely fast cutting
in a large variety of materials
Segment
Part No.
Max RPM
Size
Height
84550 14 x .125 x 1 4365
.590”
Core Bits
Part No.
82778 82779 82780 82781 82782 82783 82784 82785 82786 82787 82788 82789 82790 82791 82792 82793 82794 82795 82796 MMM/4055
Size
Segment
Max RPM
Height
(inch)
(mm)
1” 25 mm 4,000 .315”
1¼” 32 mm 3,000 .315”
1½” 38 mm 3,000 .315”
1¾” 44 mm 2,000 .315”
2” 51 mm 2,000 .315”
2¼” 57 mm 1,300 .315”
2½” 64 mm 1,300 .315”
3” 76 mm 1,300 .315”
3½” 89 mm 1,000 .315”
4” 102 mm 1,000 .315”
4¼” 108 mm 800 .315”
4½” 114 mm 800 .315”
5” 127 mm 800 .315”
6” 152 mm
665 .315”
7” 178 mm 600 .315”
8” 203 mm 500 .315”
10” 254 mm 400 .315”
12” 305 mm 330 .315”
14” 356 mm 285 .315”
REINFORCED CONCRETE & HARDER BUILDING MATERIALS
Reinforced concrete, hard bricks, limestone, terrazzo, and other hard materials.
CHARGER CORE BITS
Laser welded segments for faster penetration in medium aggregate with reinforcement and maximum
utilization of segment life.
BUSINESS/OFFICE SUPPLIES
3M Post-it® Tape
•Labeling and cover-up tape •Secure yet
removable •Temporary labeling •Copy
blockout
Part No. 658, 1” x 700” roll.
FFF/2886
WHITEBOARDS
Single-Sided Whiteboards
Whiteboard is single-sided with galvanized backing
aluminum frame, marker tray, and plastic corners.
Part No. WB-1824, 18”H x 24”W.
Part No. WB-2436, 24”H x 36”W.
Part No. WB-3648, 36”H x 48”W.
Part No. WB-4872, 48”H x 72”W.
Part No. WB-4896, 48”H x 96”W.
BOSCH
BSH/3023
Diagnostic Equipment
ESI(truck) HD DIAGNOSTIC SCAN TOOLS
Increase Shop Efficiency
•Code to fix at the truck - trouble shooting information in the tool
•Tech stays at the vehicle
•Repair info at the truck (ie. wiring diagrams, component pictures and locations, test procedures and descriptions, and DTC look-up)
•Automatic Vehicle ID
Single, Intuitive Interface
•Works on all trucks with a common scan tool
•Intuitive, easy to use
•Bluetooth wireless capability
Functions Mechanics Need
•Read and clear fault codes
•Cylinder cut-out
•Cylinder compression/balance
•Injector actuations
•Key component actuations
•Key system tests
Works with Other Software
•RP1210 VCI
•Compatible with industry software including most OEM’s
Best Aftermarket Coverage
•Truck Brands such as Freightliner, International, Kenworth, Mack, Volco, Perterbilt, Sterling, Western Star
•Engine Brands such as Cummins, Caterpillar, Detroit Diesel-MBE, Volvo Mack, Navistar, PACCAR, Perkinsm Deutz, MTU
•Brake Systems
•Transmissions
•Trailer ABS
•In-Depth Heavy Duty, Medium Duty
•Light Duty basic
Part No. 3824, Includes ruggedized 10” tablet, RP1210 data link adapter, 6,9, and 16 pin connectors, ESI (truck) diagnostics
software, and external DVD drive.
Part No. 3824BSC, Includes RP1210 data link adapter, 6,9, and 16 pin connectors, and ESI (truck) diagnostics software.
3824
3824BSC
DYNALINE
DYN/1978
Hardware & Automotive Products
GATE HOOKS
SCREW HOOKS
•Clear zinc plated finish
Part No.
Length
•Clear zinc plated finish
Wire Diameter
65051
2”.155
650522½” .155
650533” .176
FIFTH WHEEL KING PIN STABILIZER
•Stabilizes motion of unhitched trailer or RV •Threaded hitch
cap allows for height adjustment •Includes chain with inserts
•Folds for storage •Durable steel construction •King pin height
adjusts from 35” to 55” •5,000 lb. support capacity •5” x 5½”
footplate dimension
Part No. 11794.
Part No.
65077
65076
65075
65073
65072
65074
65071
65070
•Suits most passenger car side mirrors •Mirror size: 7½”W x
5”H •Arm adjusts to fit mirror sizes 4”H to 6”H
Part No. 17715.
D
C
5/64” 3/4” 15/16”1-5/16”
3/32”1-1/16” 9/32”1-11/16”
7/64”2-1/16”13/32”2-1/16”
5/32”2-1/8”11/16”3-3/8”
3/16”2-5/8”27/32”3-7/8”
3/16”2-9/16”1/2”2-9/16”
7/32”
3-3/16”1”4-7/16”
1/4” 3-1/16”1-1/32”4-5/16”
65006
65014
65017
65018
65019
65020
65024
65030
65031
B
A
C
D
C
A
E
D
D
A
E
0.216” 15/16” 1” 1-15/16”17/32”
0.112” 1/2” 3/8” 1-1/16”11/32”
0.190” 13/16” 5/8” 1-9/16”25/64”
0.158” 11/16” 5/8” 1-5/16”21/64”
0.138”35/64” 15/32” 1-1/8”19/64”
0.112” 1/2” 13/32”15/16” 1/4”
0.250” 1-1/8” 7/8” 1-15/16”19/64”
0.138”35/64”7/16”15/16”3/16”
0.112” 1/2” 3/8” 13/16”5/32”
DUAL CLIP-ON TOWING MIRROR
B
•Clear zinc plated
B
•Suits most pickup, sports utility, and van side mirrors •Outer
mirror is convex for wide angle view •Mirror size: 7½”W x 5½”H
•Arm adjusts to fit mirror sizes 4½”H to 7½”H
Part No. 17717.
C
SCREW EYES
Part No.
CLIP-ON TOWING MIRROR
B
A
PRONGHORN™
PCR/3308
Electrical Products
LED INDICATOR PLUGS
PLUG-IN GFCI & SURGE PROTECTOR
PLUG
•125V 15A, 1875W Maximum •Powered Red LED Light
Indicator lights up in the presence of electricity for a visual
confirmation that the extension cord or outlet is functioning
properly •CSA Certified, UL Listed •3 pin grounding plug and
receptacle •Rugged durable design •Clear body •Pack of 2
Part No. 21-1135.
•125V 15A Class A ground fault circuit interrupter •4-6 mA Trip
Level with 160 joules of surge protection •Manual reset and
test buttons with sealed electronics •Powered Red LED Light
Indicator lights up in the presence of electricity •Automatically
energizes for use upon plug-in or after power loss •CSA
Certified, cULus Listed •3 pin grounding plug and receptacle
•Yellow body
Part No. 21-1137.
PRIORITY®
PCR/3259
Cylinder Storage Cabinets
INDUSTRIAL STORAGE CABINETS/LOCKERS
•Durable steel secured storage cabinets for forklift and combustible gas cylinders •Yellow safety finish •Designed for horizontal or vertical storage of cylinders
•Cylinder storage capacity is based on cylinder size •Sides are made of expanded steel mesh, while top and bottom are made of solid sheet steel •Heavy gauge
construction with heavy-duty butt hinges and padlock hasp for locking doors to secure cylinders (padlock not included) •14 gauge steel top, 1½” x 1/8” angle
iron frame •Vertical units include chains for securing cylinders from falling when cabinet is shifted •Magnetic catch for keeping doors securely shut when not
locked •Pre-drilled holes in support legs for securing to floor •Meets CSA, NFPA, and OSHA design standards for storage of dangerous and flammable materials
•Horizontal storage cabinets accommodate 20 and 33 lb LPG cylinders and canisters •4 cylinder vertical storage cabinets accept standard vertical cylinders up
to 28” high •9 and 18 vertical cylinder storage cabinets accept standard vertical cylinders up to 65” high •The 8 and 16 vertical storage cabinets can be used for
either LPG cylinders or compressed gas cylinders by installing an optional shelf which is included •Includes danger signs for identifying the cabinet as containing
hazardous materials •Products comes unassembled and packed for efficient shipping and storage
Part No.
53-0804
53-0812
Cylinder Capacity (Uniform Size)
HORIZONTAL STORAGE CABINETS/LOCKERS
53-0804
4 LPG Cylinders
53-0808
8 LPG Cylinders
53-0812
12 LPG Cylinders
53-0816
16 LPG Cylinders
COMBINATION STORAGE CABINET/LOCKER
8 Horizontal LPG Cylinders and 9 Vertical
53-0820
Compressed Gas Cylinders
VERTICAL STORAGE CABINETS/LOCKERS
53-0824
4 LPG Cylinders
8 LPG Cylinders or 9 Compressed Gas
53-0828
Cylinders
16 LPG Cylinders or 18 Compressed Gas
53-0836
Cylinders
Overall Size
(W x L x H)
Shelves
Net Weight
31” x 30” x 35”
31” x 30” x 72”
46” x 30” x 72”
60” x 30” x 72”
1
3
3
6
121 lbs.
184 lbs.
234 lbs.
339 lbs.
60” x 30” x 72”
3
300 lbs.
31” x 30” x 35”
0
108 lbs.
31” x 30” x 72”
1
174 lbs.
60” x 30” x 72”
2
318 lbs.
53-0824
53-0816
53-0808
53-0820
53-0836
53-0828
AVMOR®
AVM/1267/1268
Floor Care
PREMIERE SUPERIOR
FLOOR FINISH
PREMIERE offers high gloss, superior durability, excellent detergent resistance and is well
suited for low, periodic and high maintenance
schedules. Premiere has outstanding gloss
retention and has excellent overall wear
resistance.
Part No. 2086334001, 20 litre pail.
W-75 FLOOR FINISH
W-75 is formulated to work with any maintenance method and equipment on all types
of floors. It offers good gloss characteristics
along with durability making it the number one
choice of schoolboards and institutions where
spraybuffing maintenance schedules and
budgets are restricted. W-75 offers fast drying
properties so down time is at a minimum and it
responds well to burnishing.
S-22 CLEANER,
DESCALER, &
BRIGHTENER
DYNA MIST is an outstanding waterbased treatment designed for use on
mops and cloths. When sprayed lightly it
creates an electrostatic action that attracts
and holds airborne dust, lint, grit, and
other soils. Non-flammable and non-toxic.
Part No. 1101278001, 4 litre jug.
Carpet Care
20/20 is a special blend of carpet cleaning
chemicals. This rich concentrate contains
detergents, cleaning agents, and extremely
effective odour counteractants. Use 20/20 with
hot water extractors to safely clean all types of
carpet fibres.
Part No. 2013278001,
4 litre jug.
SCORPION is a powerful and fast acting floor
stripper containing a blend of water soluble
agents, detergents, and emulsifiers that quickly
penetrates and dissolves waxers and floor
finishes. SCORPION works best in cold water
while excellent stripping and low odour characteristics guarantees optimum performance.
DYNA MIST DUST MOP
TREATMENT (WATERBASED)
S-22 is a mild mineral-based acid formulation, which is an excellent floor cleaner
for hard surfaces, non-porous floors, and
tiles. Ideal for removing mineral deposits
such as winter salt and calcium stains.
Part No. 2002257001, 1.8 litre bottle.
20/20 CONCENTRATED
CARPET CLEANER
(EXTRACTION)
SCORPION LOW ODOUR
FLOOR STRIPPER
ROTEX CONCENTRATED
NEUTRAL CLEANER
ROTEX is a one-step, neutral cleaner
designed to quickly remove embedded soils
without any residue, leaving the floor sparkling
clean. ROTEX requires no rinsing, and leaves
a summer fresh fragrance. Ideal for use with
auto-scrubbers.
EP85 SIDEKICK RESTORER
EP85 SIDEKICK is a versatile, low odour restorer designed
with the newest in environmentally preferable polymer technology. It can be mopped
on or applied with an autoscrubber. EP85
SIDEKICK is compatible with all Avmor floor
finishes and it will accommodate both low
and high maintenance schedules. EP85
SIDEKICK will restore gloss and prolong
the life of the floor finish. Excellent for
vinyl composition, linoleum, sheet vinyl,
concrete, terrazzo, quarry, Mexican tile and
most resilient type flooring.
TRAK-5 TRAFFIC SPOTTER BYE BYE FOAM
TRAK-5 is the ultimate, all-purpose spotting
DEFOAMING AGENT
agent. It is extremely effective on heavily
soiled rugs and carpets in high traffic and
other hard to clean areas. TRAK-5 loosens
and breaks up stains including oil, tar, lipstick,
shoe polish, grease, paint, tracked-in soil, and
foods. Ideal for use on upholstery.
BYE BYE FOAM is a concentrated defoaming formulation that reduces or eliminates
unwanted or excessive foam in recovery tanks,
automatic scrubbers, shampooing machines,
and hot water extractors.
EP62 CARPET & FABRIC
STAIN REMOVER
KLINGER PORCELAIN
CLEANER
ZEO ALL-PURPOSE
WASHROOM CLEANER
BEAU CREAM CLEANSER
EP62 Carpet and Fabric Stain Remover is
an aqueous solution containing a blend of
biodegradable agents. This product dissolves
coffee, red wine and other spots and stains,
quickly and effectively.
Part No. 2131210001, 946 ml bottle.
Washroom Care
HCL 23 PROFESSIONAL
BOWL CLEANER
HCL 23 is a blend of acid and surfactant working in concert to remove hard mineral deposits
through chemical action. Heavy duty cleaner
ideally made for weekly use to remove stains
and other soil from porcelain urinals and toilet
bowls.
Part No. 1695210001, 946
ml bottle.
KLINGER is an all-purpose, mild acid-based
daily cleaner for porcelain and tiles. Its thick
lotion clings to all vertical surfaces as it cleans,
descales, and deodorizes in just one application. Effectively removes hard water deposits,
soap scum, and urine salts.
Fresh mint fragrance.
Part No. 2093210001, 946
ml bottle.
ZEO is a concentrated, all-purpose scrubfree
washroom cleaner with strong foaming action,
for fast and efficient removal of soils, such as
hard water deposits and soap scum. ZEO
is formulated to clean and deodorize all
porcelain, tiles, and acrylic surfaces. Pleasant
cherry fragrance.
Part No. 2124257001,
1.8 litre bottle.
Part No. 2124278001,
4 litre jug.
BEAU cream cleanser is a powerful deep
cleaning cream that cleans all washroom surfaces. It quickly and easily removes stubborn
stains and soap scum, and contains
no harsh alkalis or acids. Pleasant
pine fragrance.
Part No. 2127210001, 946 ml
bottle.
AVMOR®
AVM/1267/1268
Disinfectant Cleaners
BALANCE PLUS
DISINFECTANT CLEANER
BALANCE PLUS Cleaner Disinfectant is
a phosphate free concentrated cleaner
disinfectant which provides effective cleaning,
deodorizing, disinfection and sanitization for
use in schools, nursing homes, hospitals, food
processing plants and other institutions. BALANCE PLUS is effective on walls, floors, sink
tops, tables, chairs, garbage cans, telephones,
bed frames and other hard, non-porous
surfaces.
BASIX NEUTRAL
pH DISINFECTANT
(CONCENTRATED)
BASIX, a super-concentrated disinfectant
sanitizer with a neutral pH, used in health care
facilities and food processing establishments.
Use BASIX where superior hygiene and
virucidal control are required. Effective against
MRSA and VRE.
GERMALIN CLEANER
DEGREASER
DISINFECTANT
LEMINEE 23 CLEANER
DISINFECTANT
GERMALIN is a cleaner, degreaser, and
disinfectant for use in health care facilities and
food processing plants. It is a quality product
that gives you everything you would ever want
in an all-purpose, one-step cleaner. Pleasant
lemon scent.
LEMINEE 23 is a cleaner disinfectant for use
in health care facilities and food processing
plants. LEMINEE 23 is very effective for
controlling odours caused by the growth of
bacteria. Pleasant lemon scent makes it suitable for use in all areas.
PINE GUARD GERMICIDAL
CLEANER
D.O.C. is a liquid germicide with a base of phenolic compounds, which destroy a broad range
of gram-positive and gram-negative bacteria.
This product can be used to clean, disinfect,
deodorize, and sanitize all hard, washable
environmental surfaces. Light pleasant
odour makes it suitable for use in all areas.
Foodservice Care
BIOMOR MULTI-PURPOSE
CLEANER
BIOMOR URINAL PUCKS
TIGER OVEN CLEANER
SOLERA DISHWASHING
LIQUID
Biomor Multi Purpose Cleaner and Odour
Eliminator has enzymatic activity that provides
outstanding breakdown of starch, carbohydrates, fats, oils and grease. It provides an
effective and environmentally friendly solution
to routine cleaning.
Part No. 2269257001,
1.8 litre jug.
TIGER is a blend of surface active agents
combined with powerful alkaline emulsifiers
to penetrate baked-on grease for fast and
easy clean-ups. TIGER is user friendly, since
it does not produce harsh odours or fumes.
Lemon fragrance.
Part No. 1015780002, 510 g aerosol.
Biomor Urinal Pucks are designed to provide
immediate and effective odour control in
urinals while inoculating the drain system with
bioenzymatics. The bioenzymatics degrade
the organics that cause odours and backups,
making a cleaner, fresher restroom experience.
Part No. 2130854001.
SOLERA Dishwashing liquid is ideal for household and institutional use. SOLERA is effective
on very dirty dishes, pots, and utensils. With
the aid of powerful grease-cutters, SOLERA
leaves dishes spotless and clean. Fresh
lemon scent.
BIOMOR HD DRAIN
MAINTAINER
CHEF GRIDDLE, FRYER, &
OVEN CLEANER
SOFT HANDS LOTION
HAND SOAP
ATOMIC ALL-PURPOSE
CLEANER
Biomor HD Drain Maintenance is a proprietary
blend of surfactants and bio-cleaning agents.
It provides long-term deep cleaning for drains,
grease traps and odour control. HD Drain
Maintenance is environmentally friendly.
Part No. 2271277001, 3.78 litre jug.
SOFT HANDS is an economical creamy high
quality hand soap. It possesses excellent
cleaning abilities, a soft texture, luxurious suds,
and a refreshing cherry fragrance. Pink lotion.
CHEF is an extremely effective cleaner for
griddles, fryers, and ovens. It is a unique and
proven formula for removing baked-on carbon,
leaving no residue or lingering odour.
ATOMIC All-Purpose cleaner is ideal for
household and institutional use. This product
may be used to clean hard surfaces, such as
counters, walls, floors, doors, blinds, painted
surfaces, and more. Leaves behind a fresh
clean lemon scent.
AVMOR®
AVM/1267/1268/1269
Cleaning Products
BIOMOR ODOUR
ELIMINATOR
TORPEDO DRAIN CLEANER CITRANET LEMON
& OPENER
LAUNDRY DETERGENT
TORPEDO is formulated using a blend of
organic acids and inhibitors, which produce an
immediate action to quickly melt grease, and
other obstructions in drains. For professional
use.
CITRANET is a super economical lemon
laundry detergent formulated for all machine
washable fabrics. Tough plastic reusable pail.
Part No. 1982555020, 18.1 kg pail.
EP69 GLASS & SURFACE
CLEANER
TROX PLUS LIQUID
LAUNDRY DETERGENT
BAN-O LIQUID DETERGENT 3 IN 1 DISINFECTING
BAN-O eliminates unpleasant odours at the
ALL-PURPOSE & GLASS
source. BAN-O is an excellent deodorant
CLEANER
Biomor Odour Eliminator is a proprietary blend
of surfactants and bio-cleaning agents. It has
enzymatic activity that provides outstanding
breakdown of starch, carbohydrates, fats, oils
and grease. Biomor Odour Eliminator safely
eliminates unpleasant odours including urine,
vomit, smoke, perspiration, and food waste at the
source.
Part No. 2283210001, 946
ml spray bottle.
EP69 Glass and Surface Cleaner dissolves,
suspends, and removes soil from glass, plexiglass, windows, mirrors, windshields, walls,
countertops, cabinets, partitions, light fixtures,
stainless steel, chrome, plastic, vinyl, appliances, desks and other surfaces not harmed
by water. EP69 leaves no residue.
TROX PLUS is a heavy duty, concentrated
liquid laundry detergent, that cleans and
freshens all washable fabrics. TROX is pH
neutral and contains water additives for hard
water performance.
for use in washrooms, garbage cans, refuse
disposal bins, lockers, changing rooms, and in
places where offensive odours exist. Original
fresh scent.
Part No. 2000278001, 3.64 litre jug.
Dispensers
UNO-MIXX & DUO-MIXX DISPENSING UNITS
The Uno-mixx and Duo-mixx dispensing units are an economical way to dispense a wide variety
of automatically diluted solutions into spray bottles, buckets or other containers at the touch of
a button. Dilution is controlled by drawing chemicals through metering tips of varying size and
injecting this metered amount into the water flow.
Features: •Versatile and easy to customize with any combination of Avmor products •Fittings
allow for one or two products to be dispensed •Better chemical performance-consistant correct
dilution •Time and labour savings-solutions are prepared accurately with reduced preparation
time •Improved employee safety-eliminates splashing, spilling, and back strain
Part No. 0000024113, Uno-mixx (1 high flow).
Part No. 0000024441, Duo-mixx (1 high flow; 1 low flow).
Part No. 0000024082, Duo-mixx (2 high flow).
AV-MIXX WALL MOUNTED DILUTION
CONTROL
Av-mixx Wall Mounted Dilution Control System is convenient
and makes cleaning easy. The system will save you money
by eliminating chemical waste and can dilute multiple Av-mixx,
EcoPure and Biomor chemicals.
Part No. 0000023769.
AV-MIXX ACCESSORIES
Part No. 0000024006, Versatile storage rack for containers.
Holds up to 6 Av-mixx products.
AV-MIXX PORTABLE
DILUTION
Av-mixx Portable Dilution Control
System makes cleaning even easier.
The system will save you money by
eliminating chemical waste and can
dilute multiple Av-mixx, EcoPure and
Biomor chemicals.
Part No. 0000023809.
KLEER WINDOW CLEANER
KLEER’s unique formula leaves glass surfaces
sparkling clean and streak-free. KLEER works
instantly to cut through grease, smoke film,
fingerprints, and grime. Economical.
3 in 1 effectively cleans and disinfects nonporous hard surfaces of food related grease,
dirt and other common soils. Ready-to-use,
one step powerful disinfectant cleaner.
Part No. 0294210001, 946 ml spray bottle.
AVMOR®
AVM/1269
Dispensers
HYDROCAP CAP FOAMER
For use with 4 litre containers only.
Part No. 0000023912.
HYDROCAP BUCKET FILL
Hydrocap bucket fill offers a low cost, portable
means of accurately diluting concentrated
cleaning products. For use with 1.8 litre
containers only.
Part No. 0000023926.
MULTI-MIXX
Avmor’s Multi-Mixx dispensing system delivers the
flexibility to dispense concentrated products and provides
multiple dilution rates which can be configured for your
precise needs. The pressure regulation on the Multi-Maxx
system ensures accurate dilution regardless of water
pressure - ensuring optimal product performance.
Part No. 0000024451, EGap.
MAINTENANCE ACCESSORIES
Part No. 0000251985, Sprayer Regular Trigger.
Part No. 0000252028, Sprayer Foaming Trigger.
Part No. 0000252159, 946 ml White Bottle.
Part No. 0000017197, Dosage Pump for 30 ml to 4 litres.
Part No. 0000012745, Pail Pump For 1 x 20 litre Pails. Distributes
2 ml, 4 ml, 6 ml and 8 ml of product according to selection.
0000251985
0000252028
0000252159
0000012745
0000017197
PRISTINE™
PCR/3119
Tilt Trucks
1/2 & 1 YARD TILT TRUCKS
•1/2 and 1 yard durable polyethylene tilt trucks
•Seamless smooth ribbed plastic construction eases dumping and cleaning using rotation
moulded polyethylene
•Will not rust, dent, chip, peel, or absorb moisture
•Powder coated full perimeter frame for load integrity with supporting dumping pivot point
•Recessed wheels for wall and doorway protection
•Easy to handle through commercial doorways and elevators
•All wheels and castors are non-marking to protect floors
•To improve portability: 1/2 yard has (2) 10” x 2-12” rubber (polyisoprene) rear wheels and (2) 3”
x 1-3/8” TPR (thermoplastic rubber) swivel front casters; 1 yard has (2) 12” x 2” rubber (polyisoprene) rear wheels and (2) 4” x 2” TPU (thermoplastic polyurethane) swivel front casters
•Counterbalance design for controlled and smooth dumping by one person
•FDA compliant bottle material
Part No.
60-6111
60-6112
60-6151
60-6152
Volume
Capacity
1/2 Yard
1/2 Yard
1 Yard HD
1 Yard HD
Weight
Capacity
850 lbs.
850 lbs.
2,100 lbs.
2,100 lbs.
Colour
Black
Blue
Black
Blue
Overall Size
(L x W x H)
65” x 28” x 38-5/8”
65” x 28” x 38-5/8”
77” x 34” x 44¾”
77” x 34” x 44¾”
MALLORY®
MAL/2708
Snowbrush
LARGE ARCTIC PLOW™ w/
SCRAPER
•Super wide 16+ inch “Push-Pull” foam head
clears snow quickly and won’t scratch paint
•Scraper blade on opposite end for quick ice
removal
Part No. 18833.
Extends to 51”
LOCTITE®
LCT/2477
Retaining Compounds
680™ RETAINING COMPOUND
Slip Fit/High Strength.
High strength, primerless, oil tolerant for slip-fitted parts.
NSF/ANSI 61-certified, ABS, CFIA.
CASTROL®
CAS/1555
Motor Oils, Lubricants, & Fluids
EDGE® MOTOR OIL with SYNTEC POWER TECHNOLOGY
Castrol EDGE with SYNTEC Power Technology has a unique and proprietary formula that reduces volatility and provides
superior protection for critical engine parts helping your vehicle operate efficiently at maximum power. Castrol EDGE with
SYNTEC Power Technology delivers:
•Power: 42% better rating on fighting power-robbing deposits
•Protection: Superior engine protection against corrosive particles versus conventional and synthetic blend oils
•Performance: Superior performance on deposit, wear and oxidation, meeting the toughest industry requirements
Castrol EDGE with SYNTEC neutralizes acids in your engine that can cause rust and corrosion on vital engine parts such
as cylinders, bearings and hydraulic valve lifters as well as providing stability and endurance under extreme conditions
(heat, load, speed) that can cause conventional oils to break down. Best of all, EDGE can be used with confidence in
every gasoline-engine passenger car, new or old, regardless of oil previously used.
Part No. 2017-38, Grade SAE 0W20, 1 litre.
PIONEER®
JAR/2573
Winter Hard Hat Liners
FR QUILTED LONG NECK HARD
HAT LINERS
100% FR treated 5 oz. (170 gsm) woven cotton shell, shell
fabric meets CGSB 155.20, 2000.
Part No. 565A, FR treated brushed cotton lining, FR polyester filling, long neck with detachable mouthpiece.
Part No. 564A, FR treated brushed cotton lining, FR polyester filling, no mouthpiece, helmet strap holes.
Part No. 566A, 100% cotton flannel lining, FR polyester
filling, detachable mouthpiece.
566A
565A
564A
CAT® CLOTHING
CAT/4043
Fleece Jacket
MOMENTUM FLEECE JACKET
A perfect mid-layer for those spring or summer mornings, the
Momentum Fleece Jacket is a must-have on the jobsite. •Full front
zip with storm flap •Overlays at front and back yoke, collar, elbows,
side panels, bottom hem, and pocket openings •Chest pocket and
lower pockets with zip closure •Chest pocket and lower pockets
with zip closure •Contrast adjustable drawcord and cord locks
at the bottom sides •Logo printed on front and back yoke •Wire
management •Black
Part No. 1313092-016-M, Medium.
Part No. 1313092-016-L, Large.
Part No. 1313092-016-XL, X-large.
Part No. 1313092-016-2XL, 2X-large.
CAT® FOOTWEAR
CAT/4042
Industrial Footwear
Thinsulate™ Insulation - Thinsulate™ Insulation is a light, thin and highly efficient way to keep your feet warm. Thinsulate Insulation dries quickly and breathes efficiently.
Slip Resistant - Footwear with slip resistant soles reduces the risk of slips and falls - the hazard of low traction surfaces.
Composite Safety Toe - CSA rated, are non-metallic, and undetectable in electronic security environments.
Steel Toe - Caterpillar® steel toe boots are approved by the C.S.A.
Puncture Resistant - Cat® puncture resistant footwear meets ASTM F2413-05 PR standards with a steel mid-plate designed to prevent objects form puncturing the sole.
SRX - Superior grip when you need best-in-class performance slip resistant soles.
HAULER 8” WATERPROOF CSA
(COMP TOE)
Upper: Waterproof Full Grain Leather
Lining: Nylon Mesh
Part No.
Size
Sock Liner: Nylex and PU Foam
P-717628-77
Midsol: Molded PU
P-717628-7.5
7½
Outsole: T1200
P-717628-8
8
Construction: Strobel/Cement
P-717628-8.5
8½
Insulation: 200 gms. Thinsulate
P-717628-9
9
Colour: Black
P-717628-9.5
9½
P-717628-10
10
P-717628-10.5 10½
P-717628-11
11
P-717628-12
12
P-717628-13
13
MMM/1441
ENFORCE ESR CSA
Upper: Full Grain Leather
Lining: Nylon Mesh
Sock Liner: Dual Density EVA
Outsole: T963
Construction: Cement
Colour: Black
WOMEN’S SWITCH ST CSA
Part No.
Size
P-718822-77
P-718822-7.5
7½
P-718822-8
8
P-718822-8.5
8½
P-718822-9
9
P-718822-9.5
9½
P-718822-10
10
P-718822-10.5 10½
P-718822-11
11
P-718822-12
12
P-718822-13
13
Upper: Nubuck with Nylon Mesh
Lining: Nylon Mesh
Sock Liner: Nylex and Molded EVA
Midsol: EVA
Outsole: T1000
Construction: Strobel/Cement
Colour: Black
Part No.
Size
P-306857-5
5
P-306857-5.5
5½
P-306857-6
6
P-306857-6.5 6½
P-306857-77
P-306857-7.5
7½
P-306857-8
8
P-306857-8.5
8½
P-306857-9
9
P-306857-9.5
9½
P-306857-10
10
3M
Industrial Use Negative Pressure Respirators
3M™ SERIES 6500QL HALF FACEPIECE
•Made of silicone for greater comfort and helps provide a softer feel
on the face •3M Cool Flow Exhalation Valve for easy exhalation for
cool, dry comfort; and designed to be long lasting •Quick Latch Drop-Down Mechanism allows easy on and off as you move in and
out of contaminated areas •No need to remove your face shield
when lowering or raising your respirator •Reusable
Part No. 6501QL, Small.
Part No. 6502QL, Medium.
Part No. 6503QL, Large.
PIRIT®
PIR3128
Heated Hose
SERIES II HEATED HOSE
•Cold Weather Water Hose
•Thermostatically Controlled, turns on when temperatures are below 7.2°C (45° F), off when
temperatures are above 10°C (50° F)
•Pirit Hose has been tested to -41°C (-42°F)
•Grounded Power Supply
•Grounded Nickel Plated Brass Female and Male Coupling
•Protective Bend Restrictors at both ends
•Abrasion Resistant Cover
•Knit Reinforcing
•Heater wires are extruded directly into the hose walls for uniform heating and unrestricted
water flow
•Certifications: UL listed, MET approved, FDA approved materials
Part No. PWL-03-12, 1/2” x 12 ft.
Part No. PWL-03-25, 5/8” x 25 ft.
Part No. PWL-03-50, 5/8” x 50 ft.
Part No. PWL-03-100, 1/2” x 100 ft.
2” DIAMETER HEATED HOSE
The PIRIT Heated Hose®: A hose that works in below-freezing temperatures. Maintain a
discharge or sewage water line 24/7 throughout the winter or use for periodic tasks.
•Thermostatically controlled. When plugged in the PIRIT Hose® automatically turns ON at 5.6°C
(42°F) or lower and, when on, turns OFF at 14°C (57°F) or higher.
•2” hose made with durable 150 psi PVC and quality aluminum cam-lock fittings.
•Double-walled PVC Construction with woven outer layer for added strength.
•Works with standard 110V GFCI outlet and draws only 315 watts.
•Approved by MET Labs, a NRTL (Nationally Recognized Testing Laboratory) to UL (499) and
CSA (C22.2 no.72 #E112826) safety standards for heated electronic appliances for outdoor use.
For added safety, the PIRIT Hose® is grounded, end-to-end, including the nozzles.
Part No. WID-2-25, 2” x 25 ft.
PREDATOR™
PCR/3317
W4 - All Stainless Steel components (X5CrNi 1810, DIN 1.4301, AISI 304)
Part No.
W2
Part No.
W4
Adjustment Range
inches
38-150038-1600 21/32 to 3/4
38-150238-1602 3/4 to 13/16
38-150438-1604 25/32 to 7/8
38-150638-160613/16 to 29/32
38-150838-160829/32 to 31/32
38-151038-16101-1/32 to 1-3/32
38-151238-16121-5/32 to 1-7/32
38-151438-16141-3/16 to 1-5/16
38-151638-1616 1¼ to 1-3/8
38-151838-1618
1-11/32 to 1-15/32
38-152038-1620
1-13/32 to 1-17/32
38-152238-16221-1/2 to- 1-5/8
38-152438-1624
1-9/16 to 1-11/16
38-152638-1626
1-11/16 to 1-13/16
38-152838-1628
1-23/32 to 1-27/32
38-153038-1630 1-7/8 to 2
38-153238-16322-1/16 to 2-5/32
38-153438-16342-7/32 to 2-5/16
38-153638-1636
2-3/8 to 2-15/32
38-153838-16382-17/32 to 2-5/8
38-154038-16402-11/16 to 2-7/8
38-154238-16422-29/32 to 3-1/8
38-154438-1644 3 to 3-5/32
38-154638-1646
3-5/32 to 3-11/32
38-154838-16483-3/8 to 3-19/32
38-155038-16503-5/8 to 3-13/16
38-155238-1652
3-27/32 to 4-1/16
38-155438-1654
4-3/32 to 4-13/32
38-155638-1656
4-11/32 to 4-21/32
38-155838-1658 4-7/16 to 4¾
38-156038-16604-13/16 to 5-1/8
mm
17 to 19
19 to 21
20 to 22
21 to 23
23 to 25
26 to 28
29 to 31
30 to 33
32 to 35
34 to 37
36 to 39
38 to 41
40 to 43
43 to 46
44 to 47
48 to 51
52 to 55
56 to 59
60 to 63
64 to 67
68 to 73
74 to 79
76 to 80
80 to 85
86 to 91
92 to 97
98 to 103
104 to 112
110 to 118
113 to 121
122 to 130
Band
Band
Width Thickness
(A)
18 mm
0.6 mm
18 mm
0.6 mm
18 mm
0.6 mm
18 mm
0.6 mm
18 mm
0.6 mm
18 mm
0.6 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
22 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
24 mm
0.8 mm
Clamp
Bolt Head
Maximum
Width Bolt Size
Size
Torque
(B)
(E)
20 mm M6*40
10 mm 10 Nm
20 mm M6*40
10 mm 10 Nm
20 mm M6*40
10 mm 10 Nm
20 mm M6*40
10 mm 10 Nm
20 mm M6*40
10 mm 10 Nm
20 mm M6*40
10 mm 10 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*50
13 mm 13 Nm
24 mm M8*55
13 mm 13 Nm
24 mm M8*55
13 mm 16 Nm
24 mm M8*55
13 mm 16 Nm
24 mm M8*55
13 mm 16 Nm
24 mm M8*55
13 mm 16 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*70
13 mm 30 Nm
26 mm M8*80
13 mm 30 Nm
26 mm M8*80
13 mm 30 Nm
26 mm M8*80
13 mm 30 Nm
26 mm M8*80
13 mm 30 Nm
W4
W2 - Band and Band Arch: Adjustment range from 17 - 19 mm to 43 - 46 mm: Stainless steel (X5CrNi 1810, DIN 1.4301, AISI 304)
Band and Band Arch: Adjustment range from 44 - 47 mm to 122 - 130 mm: Stainless steel (X8Cr17, DIN 1.4016, AISI 430)
Bolt: Grade 12.9 Zinc Plated
Other Components: Steel ASTM A283, Zinc Plated
W2
High Tension Clamps
by
GROTE
GRO/2426
Trailer Connectors
COILED AIR ASSEMBLIES
81-0015-C-EA
•Hoses are designed to withstand harsh conditions including extreme temperatures and harmful chemicals
•Tightly coiled tubing provides excellent recoil memory while minimizing sagging or kinking •Working pressure of 150
psi •1/2” O.D. •Red Hose = Emergency; Blue Hose = Service •Heavy gauge steel spring provides superior cable
support •Thread sealant added to all brass connectors for a leak-free seal •1/2” NPT, DOT brass fittings, standard
on all models
81-0015-40C-EA
Low Temperature Coiled Air
•Low temperature, double-jacketed coils remain flexible in extremely cold temperatures
•Operating temperature of -65°C to 104°C
•Nylon Hose meets SAE J844, DOT FMVSS (49 CFR 571.106) & FMCSA (393.45) specifications
•Includes a swivel fitting for the tractor-end connection
•Brass handle enables a solid grip for coupling/uncoupling hoses
Part No.
Colour
81-0012-C-EA
Red and Blue
81-0015-C-EA
Red and Blue
81-0015-RC-EA
Red
81-0015-BC-EA
Blue
81-0015-40C-EA
Red and Blue
81-0015-40RC-EA
Red
81-0015-40BC-EA
Blue
Working
Length
12 ft.
15 ft.
15 ft.
15 ft.
15 ft.
15 ft.
15 ft.
Leads
6”
12”
12”
12”
12” and 40”
12” and 40”
12” and 40”
Coiled Air
•Nylon Hose meets SAE J844, DOT FMVSS (49 CFR 571.106) & FMCSA (393.45) specifications
•Operating temperature of -40°C to 104°C
•Swivel fittings included on both ends for easy hook-up
Part No.
Colour
81-0012-EA
81-0012-R-EA
81-0012-B-EA
81-0015-EA
81-0015-R-EA
81-0015-B-EA
81-0015-40-EA
81-0015-40R-EA
81-0015-40B-EA
81-0020-EA
81-0020-R-EA
81-0020-B-EA
Red and Blue
Red
Blue
Red and Blue
Red
Blue
Red and Blue
Red
Blue
Red and Blue
Red
Blue
Working
Length
12 ft.
12 ft.
12 ft.
15 ft.
15 ft.
15 ft.
15 ft.
15 ft.
15 ft.
20 ft.
20 ft.
20 ft.
Leads
6”
6”
6”
12”
12”
12”
12” and 40”
12” and 40”
12” and 40”
12”
12”
12”
ALUMINUM GLADHANDS – STANDARD & ANGLED
•Meets or exceed SAE J318 standards •Aluminum castings with powder-coated steel
clasp plates (service and emergency) •Permanent clamp screws •Polarized emergency
and service gladhands •Includes a large face rubber seal •Replacement seals available
in rubber or polyethylene
Part No. 81-0001-EA, Universal Gladhand.
Part No. 81-0001-R-EA, Emergency Gladhand, Red.
Part No. 81-0001-B-EA, Service Gladhand, Blue.
Part No. 81-0001-38R-EA, 38° Emergency Gladhand, Red.
Part No. 81-0001-38B-EA, 38° Service Gladhand, Blue.
81-0001-38B-EA
81-0001-EA
81-0001-R-EA
81-0001-B-EA
ANODIZED GLADHANDLES
•Provides strain relief and prevents kinking
of the air coil •Anodized coating provides
superior corrosion resistance •Allows user to
couple/uncouple with ease •Includes thread
sealant on the male end •Sold in pairs
Part No. 81-0125-PR.
81-0001-38R-EA
STAINLESS STEEL FILTER
SCREEN
•Improved wear resistance lengthens service
life •Pack of 25
Part No. 81-0115-25-PK.
POWER CORD &
GLADHAND SUPPORT
HOLDER
POGO STICKS
•Provides protection and easy storage of
electrical cables and air lines when not in use
•High impact material designed to withstand
all elements
Part No. 81-0141-EA, 3 Function – 1 power
cord and 2 gladhands.
Part No. 81-0142-EA, 4 Function – 2 power
cord and 2 gladhands.
•Designed for nylon, rubber air hoses and
heavy-duty ABS cables •Internal heavy duty
spring •Includes a 7/16” mounting bolt, snap
clip, 3 hose holder, eyebolt and nut •40” length
Part No. 81-0130-EA, Chrome.
Part No. 81-0131-EA, Zinc dichromate.
81-0141-EA
3.5” SNAP CLIP
•Stainless steel construction •Ideal for use
with a tracker bar
Part No. 81-0140-EA.
81-0142-EA
BEHRINGER
BEH/1377/1378
Pipe Clamps
Easy to use, maintenance free. Engineering, plant, and maintenance personnel appreciate the Behringer Clamp’s rugged construction, simplicity and clean design. All systems can be quickly
and effectively secured and are virtually maintenance free. Our modular clamp design assures greater flexibility in assembly, adjustment and stacking, as well as an endless variety of application
configurations to suit every need.
Twin Series
•(*)Complete assemblies include (2) clamping halves, (1) cover plate, (1) weld plate, and (2) hex bolts
Group
T2
T3
T4
T5
Size
Clamping Complete Clamping
Cover Plates Weld Plates
(inches)
O.D.
Assemblies* Halves
T - Tube (inches)
Part No.
Part No.
Part No.
Part No.
P - Pipe
1/4 x 1/4 T
3/8 x 3/8 T
1/2 x 1/2 T
1/4 x 1/4 P
5/8 x 5/8 T
3/8 x 3/8 P
3/4 x 3/4 T
1/2 x 1/2 P
7/8 x 7/8 T
1 x 1 T
3/4 x 3/4 P
1¼ x 1¼ T
1 x 1 P
1¼ x 1¼ P
.250
.375
.500
.540
.625
.675
.750
.840
.875
1.00
1.05
1.25
1.32
1.66
AT2025-PPT2025-PP
AT2038-PPT2038-PP
AT2050-PPT2050-PP
AT20540-PPT20540-PP
AT2062-PPT2062-PP
AT20675-PPT20675-PP
AT3075-PPT3075-PP
AT30840-PPT30840-PP
AT3087-PPT3087-PP
AT3100-PPT3100-PP
AT41050-PPT41050-PP
AT5125-PPT5125-PP
AT51315-PPT51315-PP
AT51660-PPT51660-PP
TCP-T2
TCP-T2
TCP-T2
TCP-T2
TCP-T2
TCP-T2
TCP-T3
TCP-T3
TCP-T3
TCP-T3
TCP-T4
TCP-T5
TCP-T5
TCP-T5
Hex Bolts
Part No.
TWP-T2
TWP-T2
TWP-T2
TWP-T2
TWP-T2
TWP-T2
TWP-T3
TWP-T3
TWP-T3
TWP-T3
TWP-T4
TWP-T5
TWP-T5
TWP-T5
HEX-T2
HEX-T2
HEX-T2
HEX-T2
HEX-T2
HEX-T2
HEX-T3
HEX-T3
HEX-T3
HEX-T3
HEX-T4
HEX-T5
HEX-T5
HEX-T5
Twin Series Application:
Pressures up to 1000 psi, pneumatics and low pressure
hydraulics (up to 1¼” pipe).
Standard Series
Group
1
2
3
4
5
6
7
Size
(inches)
T - Tube
P - Pipe
1/4 T
3/8 T
1/8 P
1/2 T
1/4 P
5/8 T
3/8 P
1/4 T
1/4 P
3/8 P
3/4 T
1/2 P
7/8 T
1 T
3/4 P
1-1/8 T
1¼ T
1 P
1½ T
1¼ P
1¾ T
1½ P
2 T
2¼ T
2 P
2½ P
3 T
3½ T
3 P
O.D.
Assemblies* Halves
Part No.
Part No.
(inches)
Part No.
Part No.
.250
.375
.405
.500
.540
.625
.675
.250
.540
.675
.750
.840
.875
1.00
1.05
1.13
1.25
1.32
1.50
1.66
1.75
1.90
2.00
2.25
2.38
2.88
3.00
3.50
3.50
A1025-PP
A1038-PP
A10405-PP
A2050-PP
A20540-PP
A2062-PP
A20675-PP
A3025-PP
A30540-PP
A30675-PP
A3075-PP
A30840-PP
A3087-PP
A3100-PP
A41050-PP
A41125-PP
A5125-PP
A51315-PP
A5150-PP
A51660-PP
A6175-PP
A61900-PP
A6200-PP
A7225-PP
A72375-PP
A72875-PP
A7300-PP
A7350-PP
A73500-PP
Stacking
Bolts
Part No.
1025-PP COP-1STW-1
1038-PP COP-1STW-1
10405-PPCOP-1 STW-1
2050-PP COP-2STW-2
20540-PPCOP-2 STW-2
2062-PP COP-2STW-2
20675-PPCOP-2 STW-2
3025-PP COP-3STW-3
30540-PPCOP-3 STW-3
30675-PPCOP-3 STW-3
3075-PP COP-3STW-3
30840-PPCOP-3 STW-3
3087-PP COP-3STW-3
3100-PP COP-3STW-3
41050-PPCOP-4 STW-4
41125-PPCOP-4STW-4
5125-PP COP-5STW-5
51315-PPCOP-5 STW-5
5150-PP COP-5STW-5
51660-PPCOP-5 STW-5
6175-PP COP-6STW-6
61900-PPCOP-6 STW-6
6200-PP COP-6STW-6
7225-PP COP-7STW-7
72375-PPCOP-7 STW-7
72875-PPCOP-7 STW-7
7300-PP COP-7STW-7
7350-PP COP-7STW-7
73500-PPCOP-7 STW-7
Safety Plates Hex Bolts
Part No.
Part No.
STB-1
STB-1
STB-1
STB-2
STB-2
STB-2
STB-2
STB-3
STB-3
STB-3
STB-3
STB-3
STB-3
STB-3
STB-4
STB-4
STB-5
STB-5
STB-5
STB-5
STB-6
STB-6
STB-6
STB-7
STB-7
STB-7
STB-7
STB-7
STB-7
SAF-1
SAF-1
SAF-1
SAF-2
SAF-2
SAF-2
SAF-2
SAF-3
SAF-3
SAF-3
SAF-3
SAF-3
SAF-3
SAF-3
SAF-4
SAF-4
SAF-5
SAF-5
SAF-5
SAF-5
SAF-6
SAF-6
SAF-6
SAF-7
SAF-7
SAF-7
SAF-7
SAF-7
SAF-7
HEX-1
HEX-1
HEX-1
HEX-2
HEX-2
HEX-2
HEX-2
HEX-3
HEX-3
HEX-3
HEX-3
HEX-3
HEX-3
HEX-3
HEX-4
HEX-4
HEX-5
HEX-5
HEX-5
HEX-5
HEX-6
HEX-6
HEX-6
HEX-7
HEX-7
HEX-7
HEX-7
HEX-7
HEX-7
Clamping Halves
Standard Series Application:
Pressures under 1500 psi, pneumatic and low pressure hydraulic (up to 3” pipe).
BEHRINGER
BEH/1377/1378
Pipe Clamps
Easy to use, maintenance free. Engineering, plant, and maintenance personnel appreciate the Behringer Clamp’s rugged construction, simplicity and clean design. All systems can be quickly
and effectively secured and are virtually maintenance free. Our modular clamp design assures greater flexibility in assembly, adjustment and stacking, as well as an endless variety of application
configurations to suit every need.
Heavy Series
Size
(inches)
O.D.
Assemblies* Halves
T - Tube
Part No.
Part No.
Part No.
Part No.
P - Pipe (inches)
Group
1/4 T
3/8 T
1/2 T
1/4 P
5/8 T
3/8 P
3/4 T
1/2 P
1 T
3/4 P
1¼ T
1 P
1½ T
1¼ P
1¼ P
1½ P
2 P
2 T
2½ P
3 T
3½ T
4 T
4½ T
5 T
5 P
6 P
H3
H4
Single Heavy Series Application:
For line pressures over 1500 psi, outdoor environments,
reduces pipe vibration, shock and hammer (up to 8” pipe).
H5
H6
H7
H8
H9
.250
.375
.500
.540
.625
.675
.750
.840
1.00
1.05
1.25
1.32
1.50
1.66
1.66
1.90
2.38
2.00
2.88
3.00
3.50
4.00
4.50
5.00
5.56
6.63
AH3025-PP
AH3038-PP
AH3050-PP
AH30540-PP
AH3062-PP
AH30675-PP
AH4075-PP
AH40840-PP
AH4100-PP
AH41050-PP
AH5125-PP
AH51315-PP
AH5150-PP
AH51660-PP
AH61660-PP
AH61900-PP
AH62375-PP
AH6200-PP
AH72875-PP
AH7300-PP
AH7350-PP
AH8400-PP
AH8450-PP
AH8500-PP
AH95563-PP
AH96625-PP
Stacking
Bolts
Part No.
Safety Plates Hex Bolts
Part No.
Part No.
H3025-PP SCP-H3SWP-H3 STB-H3 SAF-H3 HEX-H3
H30540-PPSCP-H3SWP-H3 STB-H3 SAF-H3 HEX-H3
H72875-PPSCP-H7SWP-H7— —HEX-H7
H7300-PP SCP-H7SWP-H7— —HEX-H7
PROPEL™ HD
PCR/3106/3107
PMS: 151C
CMYK: C0 M62 Y91 K0
45% black
PMS: 534C65-0115
CMYK: C100 M90 Y50 K20
Features: •Automatic valve providing overload protection •Forged steel base is welded to the cylinder shaft to ensure strength and eliminate leaks •Chrome pump piston and ram for additional rust
resistance and reducing abrasion •Grab handles for carrying and positioning •Functions in upright,
angled, or horizontal position •Spare seal kit included for extended life •Meets ANSI/ASME PALD
2009 and EN standards •Three piece zinc plated handle, no leak construction, high quality glide
action pressure pump, hydraulic system is protected from internal damage, machined and polished
cylinders, wide rugged base, heat treated saddle, and most jacks have heat treated extension screw
Jack
Part No.
0% black
PMS: 151C
65-0123
CMYK: C0 M62 Y91
K0
45% black
65-0155
Jacks
HD HYDRAULIC BOTTLE JACKS
Capacity
65-0115
12 Ton
65-0117 12 Ton Low
12 Ton
65-0119 Quick Lift
65-0123
20 Ton
65-0125 20 Ton Low
20 Ton
65-0127 Quick Lift
65-0135
30 Ton
65-0155
50 Ton
Minimum
Height
Lifting Height
Adjusting
Height
Base Size
Seal Kit
Part No.
6 /16” x 4 /16”
613/16” x 411/16”
65-8115
65-8117
97/16”515/16”39/16” 79/16” x 511/16”
105/8”61/4”- 79/16” x 511/16”
73/16”33/8”19/16” 79/16” x 511/16”
65-8119
65-8123
65-8125
1013/16”611/16”23/4” 8” x 51/2”
111/16”61/4”- 715/16” x 515/16”
117/8”7” - 89/16” x 615/16”
65-8127
65-8135
65-8155
9 /8”5 /16”
615/16”33/4”
3
15
3⅛” 3” 13
11
100% black
PROPEL™ HD
PCR/3106/3107
Jacks
HD PNEUMATIC BOTTLE JACKS
•Designed for heavy duty truck shop use, rail car, bus works, construction, mining, oil field service, mobile homes, transport and road side assistance •High performance pneumatic pump reduces lifting time
•Additional manual pump feature for when there is no access to compressed air •Ductile iron base for
12 and 20 Ton, heavy duty steel base for 30 Ton and greater •Heat treated extension screw increases
low height to get full use of ram •Overload and bypass safety valves prevent the jack from being used
beyond its rated capacity or over extension •Self-retracting ram •Wiper seals protect hydraulic system
from debris and contaminants •Long air line and air valve with integrated filter for remote use and
protection from contaminants •High tenacity o-ring to reduce wear and double cylinder cleaning •Grab
handles for carrying and positioning •Meets ANSI/ASME PALD 2009 and EN standard
Jack
Part No.
65-0312
65-0320
65-0335
65-0350
Capacity
12 Ton
20 Ton
35 Ton
50 Ton
Minimum
Height
Adjusting
Height
Lifting Height
101/4”913/16”33/16” 105/16”95/8”35/16” 107/16”57/8”-
121/16”7” -
Base Size
73/4” x 51/4”
83/4” x 67/16”
87/8” x 77/8”
107/8” x 73/8”
65-0335
Seal Kit
Part No.
65-0350
65-8312
65-8320
65-8335
65-8350
HD JACK STANDS
•High quality heavy-duty construction •Durable backed enamel finish to resist corrosion
•Pin-type support column adjusts to multiple height positions •Adjustment pin is secured to
stand to prevent loss •Large support saddle with locating lugs to position and centre load
•#65-0405 meets ANSI/ASME PALD 2009 and EN standard •#65-0510 and 65-0512 meets
ANSI/ASME PALD 2005 and EN standard
Jack
Part No.
Capacity Sold as
65-0405 5 Ton Pair
65-0510 10 Ton Each
65-0512 12 Ton Each
Style
Pin
Pin
Pin
Minimum
Height
Maximum
Height
10½”
16½”
283/8”467/8”
3111/16”
47¾”
HD LONG FLOOR JACKS
•Designed for heavy-duty lifting applications, including bus and truck fleets, agriculture, industrial, and heavy construction equipment requiring access to very low hard to reach places •Long
59” body for easier lifting of vehicle with long overhangs •Foot operated pump for quick lifting
•Automatic safety overload valves •Swivel casters for maneuverability •Handle mounted control
lever to lock handle in 1 of 3 positions •High tenacity o-ring to reduce wear •Treated cylinder
inner wall for durability and impact resistance •Thick lifting rod and large wheels for long lasting
strength and durability •Meets ANSI/ASME PALD 2009 and EN standard
Part No.
Capacity
Lifting Range
65-0717
65-0725
5 Ton
10 Ton
57/8” to 22”
61/4” to 22”
Seal Kit
Part No.
65-8717
65-8725
HD AIR/HYDRAULIC FLOOR JACKS
•Designed for heavy-duty lifting applications, including bus and truck fleets, agriculture,
industrial, and heavy construction equipment •Long “T” handle assists in positioning jack •Load
release on top of handle is operable in any handle position •Handle can be secured in either
vertical, horizontal or 45° position •Compact design fits easily between tandem wheels •Large
wheels for maneuverability •Self retracting ram •Automatic safety overload valves and safety
bypass •High tenacity O-ring to reduce wear •Treated cylinder inner wall for durability and
impact resistance •Fast lifting air motor •Special treatment on cylinder for durability •Meets
Part No.
Capacity
65-0752
65-0765
65-0780
65-0785*
22 Ton
35 Ton
50 Ton
35/22 Ton
Lifting Range
8-7/8” to 17-11/16”
10-1/8” to 21-1/8”
11-7/16” to 21¼”
8½” to 19¾”
HD AIR/HYDRAULIC LONG FLOOR JACKS
•Designed for heavy-duty lifting applications, including bus and truck fleets, agriculture, industrial, and heavy construction equipment requiring access to very low hard to reach places •Long
59” body for easier lifting of vehicle with long overhangs •Foot operated pump for quick lifting
•Automatic safety overload valves •Swivel casters for maneuverability •Handle mounted control
lever to lock handle in 1 of 3 positions •High tenacity O-ring to reduce wear •Treated cylinder
inner wall for durability and impact resistance •Thick lifting rod and large wheels for long lasting
strength and durability •Can be operated manually when air is not available •Meets ANSI/ASME
PALD 2009 and EN standard
Part No.
Capacity
Lifting Range
65-0735
65-0740
5 Ton
10 Ton
57/8” to 22”
61/4” to 22”
Seal Kit
Part No.
65-8735
65-8740
HD LOW PROFILE TRANSMISSION JACKS
•Forged base •Chromed pump piston and ram for additional rust resistance and abrasion reduction •PU wheel for durability •Meets ANSI/ASME PALD 2009 and EN standard
Part No.
Capacity
Lifting Range
Seal Kit
Part No.
65-0807
65-0810
65-0815
1/2 Ton
1 Ton
1-1/2 Ton
7½” to 29¾”
6-7/8” to 35¼”
8¾” to 37”
65-8807
65-8810
65-8815
Seal Kit
Part No.
65-8752
65-8765
65-8780
65-8785
*35/22 Ton Two Stage has a forged base for enhanced durability
65-0807
65-0815
PMS: 151C
CMYK: C0 M6
45% black
PMS: 534C
CMYK: C100
PROPEL™ HD
PCR/3106/3107
Jacks
HD HIGH LIFT TRANSMISSION JACKS
PMS: 151C
CMYK: C0 M62 Y91 K0
•Wide leg base with swivel wheels •Fully adjustable universal saddle •Foot operated hydraulic
pump for easy control of positioning or removing transmission •High tenacity O-ring •Double
acting cleaning seals •Meets ANSI/ASME PALD 2009 and EN standard
45% black
PMS: 534C
CMYK: C100 M90 Y50 K20
PMS: 151C
CMYK: C0 M62 Y91 K0
Capacity
65-0827
65-0830*
65-0835
1/2 Ton
1/2 Ton
1 Ton
*Pnemuatic
0% black
65-0830
Part No.
37-5/8” to 76½”
32¾” to 71½”
33-7/8” to 72-11/16”
Cranes & Engine Stands
45% black
•Deliver the lifting ability you need with the combined advantage of compact
storage •Double bearing swivel casters provide smooth and easy maneuvering around the work place •Includes ram, chain, and hook
100% black
65-8827
65-8830
65-8835
Part No. 65-0850, Saddle for #65-0830 and 65-0835.
65-0835
FOLDABLE ENGINE CRANES
Seal Kit
Part No.
Lifting Range
HD FOLDABLE ENGINE CRANES
HD ENGINE STAND
•Heavy-duty welded construction with rugged reinforced
tubular steel •Large caster wheels •Large capacity with
3 positions •Special square base frame resulting in a
stable working stance •Unique quick-lift technology by
double action pump •Chrome plated lifting piston and
pump plunger •Special hydraulic rams equipped with
a built-in bypass mechanism •Folds up to save space
•Meets ANSI/ASME PALD 2005 and EN standard
•Folding •Meets ANSI/ASME PALD 2005 and EN
standard
Part No. 65-1140, 2,000 lbs. capacity.
Part No. 65-1112, 1,250 lb. capacity.
PMS: 534C
CMYK: C100 M90 Y50 K20
Part No.
65-1005
65-1011
Capacity
Lifting Range
Seal Kit Replacement
Ram
Boom Extends Part No.
Part No.
1 Ton 1-1/8” to 82-3/16” 20-7/8” to 35” 65-900565-9414
2 Ton
0” to 92”
25¼” to 46½” 65-901165-9420
Part No.
65-1010
65-1012
Seal Kit Replacement
Ram
Capacity Lifting Range Part No.
Part No.
1 Ton
2 Ton
0” to 96½” 65-901065-9410
0” to 98” 65-901265-9412
100% black
Portable Hydraulic Equipment
•Contains hydraulic equipment needed for lifting, pushing, pulling, bending, straightening, and spreading •Perfect for the auto body, frame repair, and construction industry
Features: •”Quick-Lock” design for fast and easy assembly and disassembly •Thicker walled extension tubes for added strength and longer life •Blow molded case •Meets
HD 4 TON PORTABLE RAM HYDRAULIC EQUIPMENT KIT
•Includes: storage case, hydraulic pump, hose, ram flat base, 4”, 8”, 12”, and 16” extension
tubes, 1/2 ton spreader, single acting ram with 4” stroke, tube coupling, ram toe, wedge head,
serrated saddle, flex head, plunger toe, and 90° wedge head
•Min Ram Height: 10-5/8”; Ram Lifting Height: 5”
Part No. 65-1205.
REPLACEMENT PARTS
Part No. 65-9205, Seal Kit.
Part No. 65-9801, 4” Extension Tube.
Part No. 65-9805, Ram Flat Base.
Part No. 65-9806, Ram Toe.
Part No. 65-9807, Plunger Toe.
Part No. 65-9808, Wedge Head.
Part No. 65-9809, 90° Wedge Head.
Part No. 65-9810, Tube Coupling.
Part No. 65-9811, Serrated Saddle.
Part No. 65-9812, Flex Head.
Part No. 65-9813, 1/2 Ton Spreader.
Part No. 65-9814, Single Acting Ram with 4” Stroke.
Part No. 65-9815, Hydraulic Pump.
Part No. 65-9816, Hose End Coupler.
Part No. 65-9817, Ram End Coupler.
Part No. 65-9818, 5 ft. Hose.
Part No. 65-9819, Storage Case.
HD 10 TON PORTABLE RAM HYDRAULIC EQUIPMENT
KIT
•Includes: storage case with wheels, hydraulic pump, hose, ram flat base, 5”, 10”, 14”, and
19” extension tubes, 1/2 ton spreader, single acting ram with 6” stroke, tube coupling, ram toe,
wedge head, serrated saddle, flex head, plunger toe, and 90° wedge head
•Min Ram Height: 14-1/8”; Ram Lifting Height: 5-5/16”
Part No. 65-1211.
REPLACEMENT PARTS
Part No. 65-9855, Ram Flat Base.
Part No. 65-9856, Ram Toe.
Part No. 65-9857, Plunger Toe.
Part No. 65-9858, Wedge Head.
Part No. 65-9859, 90° Wedge Head.
Part No. 65-9860, Tube Coupling.
Part No. 65-9861, Serrated Saddle.
Part No. 65-9862, Flex Head.
Part No. 65-9864, Single Acting Ram with 6” Stroke.
Part No. 65-9865, Hydraulic Pump.
Part No. 65-9816, Hose End Coupler.
Part No. 65-9817, Ram End Coupler.
Part No. 65-9818, 5 ft. Hose.
Part No. 65-9869, Storage Case with Wheels.
PROPEL™ HD
PCR/3106/3107
Miscellaneous Equipment
HD TRUCK RAMPS
4½ Ton Features: •Detachable ramp from base for accessibility
20 Ton Features: •Stow away retractable handles and wheels for maneuverability •Meets ANSI/ASME PALD 2005
and EN standard
Capacity
Width
Sold as
65-20174½ Ton
65-2020
20 Ton
Part No.
9”
16”
Pair
Each
1,250 LB. WHEEL DOLLY
•1,250 lb. capacity, lifts tires up to 10” wide •Ratcheting foot pedal
for hands-free use •Rugged steel construction •Heavy-duty 3½”
ball bearing swivel casters •Folds flat for easy storage
Part No. 65-2005.
PMS: 151C
65-2017
CMYK: C0 M62 Y91 K0
45% black
65-2020
PMS: 534C
CMYK: C100 M90 Y50 K20
Shop Presses
Features: •Ideal for automotive, truck, fleet, and industrial repair shops •Heavy-duty welded construction •Double speed •Supplied with a full set of pressing
pins with a purpose made tool shelf •V-blocks included •Meets ANSI/ASME PALD 2009 and EN standard
HD 15 TON HYDRAULIC
SHOP PRESS
•Ram Stroke: 6¼”
•Side Stroke: 6¼”
•Working Range: 5-7/8” to 18”
•Bed Width: 19-11/16”
•Overall Size: 27½” x 21¼” x 38”
•Manually operated double speed pump
Part No. 65-1315.
HD 20 TON HYDRAULIC
SHOP PRESS
0% black
•Ram Stroke: 7¼”
•Side Stroke: 6-15/16”
151C
•Working Range:PMS:
1-7/16”
to 36⅛”
CMYK: C0 M62 Y91 K0
•Bed Width: 20-1/16”
•Overall Size: 28¾” x 22” x 64”
45% black
•Manually operated double speed foot and
hand pump
Part No. 65-1320.
Part No. 65-1323, Grid Guard, 20¼” x 20½”.
HD 30 TON HYDRAULIC
SHOP PRESS
•Ram Stroke: 5-15/16”
•Working Range: 5-15/16” to 40-5/8”
•Bed Width: 21-1/16”
•Overall Size: 31¼” x 27½” x 72”
hand pump
Part No. 65-1330.
Part No. 65-1333, Grid Guard, 19-1/16” x
20½”.
HD 50 TON HYDRAULIC
SHOP PRESS
•Working Range: 2-11/16” to 41¼”
•Bed Width: 28¾”
•Overall Size: 40½” x 31½” x 73”
•Press bed is raised and lowered by hand
winch
hand pump
Part No. 65-1350.
Part No. 65-1353, Grid Guard, 26½” x 24-5/8”.
100% black
8 PC. HD PRESS PIN SET
HD 50 TON AIR/HYDRAULIC
SHOP PRESS
•Working Range: 2-11/16” to 41¼”
•Bed Width: 28¾”
•Overall Size: 40½” x 31½” x 73”
•Press bed is raised and lowered by hand winch
Part No. 65-1355.
Part No. 65-1353, Grid Guard, 26½” x 24-5/8”.
CROSBY
PMS: 534C
CMYK: C100 M90 Y50 K20
•Full set of pressing pins with purpose made tool shelf and adapter
•Fits all presses
•Pin details:
-2 Ton: 3/8” x 1” x 2”
-3 Ton: 1/2” x 1” x 2-3/8”
-8 Ton: 5/8” x 1” x 2-3/8”
-12 Ton: 11/16” x 1” x 3-11/32”
-14 Ton: 25/32” x 1” x 3-11/32”
-16 Ton: 7/8” x 1” x 3-11/32”
-18 Ton: 1” x 1” x 4-11/32”
-20 Ton: 1-3/16” x 1” x 4-11/32”
Part No. 65-1327.
CFT/1725
Fittings
Hoist
100%
black Rings
S-264 PAD EYES
S-265 WELD-ON PIVOT LINK
•(*) Meets the requirements of military Specification MS-51930A
Part No. 1090722*, Size 0.
Part No. 1090740*, Size 1.
Part No. 1090768*, Size 1½.
Part No. 1090786, Size 2.
Part No.
Working Load Limit (t)
Design Factor Design Factor
4:1
5:1
12907401.2
12907683.2
12907865.3
12908028.0
129082015.0
1.0
2.5
4.2
6.4
12.0
FLUKE
FLK/2268
True-RMS Digital Multimeters
UTILITY MULTIMETER
•VCHEK™ LoZ low impedance measurement function to
simultaneously test for voltage or continuity •True-RMS for
accurate AC measurements on non-linear loads •A large
backlit display allows for easy visibility in low-lit areas •Record
signal fluctuations using the Min/Max function •Diode test
for testing general-purpose
germanium, silicon, and power
diodes •Integral holster with probe
holders for easy storage •Auto
and Manual ranging for added user
functionality •Meets Measurement
Category CAT III 600 V and
Category IV 300 V standards for a
higher level of safety
Part No. 113.
REMOTE DISPLAY MULTIMETER
•True-RMS AC voltage and current for accurate measurements
on non-linear signals •Measure up to 1000 V AC and DC
•Measure up to 10 A (20 A for 30 seconds) •10,000 μF
capacitance range •Frequency to 50 kHz •Built in thermometer
conveniently allows you to take temperature readings without
having to carry a separate instrument •Resistance, continuity
and diode test •Low power wireless technology allows the
display to be carried up to 10 meters (33 ft) away from the
point of measurement for added flexibility. No interference
with measurements •The removable magnetic display can
be conveniently mounted where it is easily seen •Make
measurements without holding the meter to improve visual
focus on probes and augment safe electrical measurements
•Use as a conventional multimeter when the display is
connected •Radio transmitter automatically turns off when the
display is connected to the meter •Auto power off maximizes
battery life •Min/Max and Average recording to capture
variations automatically •Test continuity and diodes •Easy to
read display with large digits and bright backlight •Battery life
approximately 400 hours
Part No. 233.
INSULATION MULTIMETER
The Fluke 1577 Insulation Multimeter combines a digital
insulation tester with a full-featured, True-RMS digital
multimeter in a single compact, handheld unit, which provides
maximum versatility for both troubleshooting and preventative
maintenance. Like other tools that
you have come to expect from Fluke,
the 1577 is rugged, reliable, and easy
to use. Whether you work on motors,
generators, cables, or switch-gear,
the Fluke 1577 Insulation Multimeter
is ideally suited to help you with your
tasks.
Includes: remote probe, test leads,
alligator clips, hard case, and user
documentation.
Part No. 1577.
RUGGED IP67 INDUSTRIAL
MULTIMETER
Fluke 27 II and Fluke 28 II digital multimeters define a new
standard for operating in harsh
conditions with the features and accuracy to troubleshoot most electrical
problems. Both meters have IP 67
(waterproof and dustproof) rating,
MSHA approvals, extended operating
temperature range of -15°C to 55°C
(-40°C for up to 20 minutes) and 95
% humidity, and have been designed
and tested to withstand a 3 m (10
ft) drop. The new Fluke 20 Series
Multimeters are built to work in the
toughest environments.
Includes: test leads, alligator clips,
temperature probe (28 II), holster,
manual, CD-ROM, three AA batteries.
Part No. 27-II.
Part No. 28-II, TRMS Version.
ELECTRICAL MULTIMETER
Designed by electricians. Engineered by Fluke. Compact
True-RMS meter for electrical
troubleshooting. The Fluke 114
is a battery-powered, True-RMS
multimeter the perfect troubleshooting
tool for “go/no-go” testing. It includes
a feature to prevent false readings
caused by ghost voltage
Part No. 114/EFSP.
ELECTRONICS LOGGING
MULTIMETER with TRENDCAPTURE
•Compatible with Fluke Connect mobile app and all Fluke FC
enabled test tools with optional ir3000 FC infrared connector
(sold separately) •TrendCapture quickly graphically displays
logged data session to quickly determine whether anomalies
may have occurred •Zoom on trend provides unprecedented
ability to view and analyze TrendCapture data; zoom in up to
14 times •Selectable AC filter (smoothing mode) helps display
a steadier reading when the input signal is changing rapidly or
noisy •Adjustable recording and auto hold thresholds, specify
a percentage change in the readings that begins a new event
•Large 50,000 count, 1/4 VGA display with white backlight
•Logging function with expanded memory for unattended
monitoring of signals over time •On board help screens for
measurement functions •Saved measurements allow you to
name and recall measurements made in the field •Multi-lingual
interface •Multiple logging sessions possible without download
•0.025 % basic DC accuracy •100 kHz ac bandwidth •Real
time clock for automatic time stamping of saved readings
•True-RMS AC voltage and current for accurate measurements
on complex signals or non-linear loads. AC bandwidth specified
to 100 kHz. •Measure up to 10
A (20 A for 30 seconds) •100 mF
capacitance range •Temperature
function •Relative mode to remove
test lead resistance from low ohms
or capacitance measurements
•Peak capture to record transients
as fast as 250 μs •Premium test
leads and alligator clips and amp
jack plugs included
Includes: •Fluke 287 True-RMS
Electronics Logging Multimeter
•TL71 Test Leads •AC175 Alligator
Clips •Batteries – 6 AA Installed
Part No. 287.
INTRINSICALLY SAFE DIGITAL
MULTIMETER
Now there’s one intrinsically safe digital multimeter (DMM)
you can use in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone
21 and 22. Whether you work in petroleum, chemical, or
pharmaceutical environments, all the test and troubleshooting power you need is packed into the
most rugged intrinsically safe (IS) DMM
Fluke has ever built. The Fluke 28 II
Ex is also waterproof, dust-proof and
drop-proof. You’ll be equipped to handle
any situation, inside and outside of
hazardous zones, without compromising
compliance or measurement performance. IP67.
Part No. 28IIEX/ETL .
Digital Multimeters
77-IV DIGITAL MULTIMETER
The Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic
problems. This meter is simple to use and has significant improvements with more measurement
functions, conformance to the latest safety standards, and a much larger display that’s easier to
view. The Fluke Model 77-IV is a battery-powered, average responding-RMS indicating multimeter,
with a 6000-count, 3 3/4-digit display, and a bar graph.
Measures:
•AC / DC voltage & current •Wide 1000 V measurement range
•Average responding AC measurements
•0.3% accuracy
•10 Amps continuous (20A for 30 seconds)
•Frequency and capacitance
•Resistance and continuity
•Diodes
This multimeter meets the CAT III and CAT IV IEC 61010 standards.
Includes: •Fluke TL75 test leads •9 V battery (installed) •Manual
Part No. 77-4.
FLUKE
FLK/2268
Digital Multimeters
83V INDUSTRIAL MULTIMETER
The Fluke 83-5 offers accuracy and
diagnostics for industrial maintenance
in the tool box or on the bench. The
new Fluke 83-5 has improved measurement functions, trouble-shooting
features, resolution and accuracy
to solve more problems on motor
drives, in plant automation, power
distribution and electro-mechanical
equipment.
Part No. 83-5.
5.5 DIGIT RESOLUTION DIGITAL
MULTIMETER
The Fluke 8808A multimeter has a broad range of functions,
measuring volts, ohms and amps with a basic V dc accuracy
of 0.01 %. It is remarkably easy to use, even by unskilled
operators, because it makes the measurements you perform
most often extremely easy and fast to do. Six setup buttons on
the Fluke 8808A front panel operate like a car radio’s station
presets. Simply set up the meter for a common measurement,
then press shift followed by a setup button (S1 to S6) to save
the setup. Now each time you perform that measurement,
you simply press the appropriate setup key. It’s that easy!
The setup buttons eliminate the need to follow complex work
instruction sheets. Operators no longer need to press multiple
buttons to set up a measurement function and range, test limits,
or enter other parameters to make a measurement.
Part No. 8808A.
ELECTRICIAN’S MULTIMETER &
VOLTAGE TESTER COMBO KIT
All your electrical troubleshooting tools in one package.
•179 True-RMS Digital Multimeter
•1AC-II VoltAlert Non-Contact Voltage Tester
•K-type temperature probe
•Retractable long reach alligator clips
•Sharp 12 mm stainless steel tip provides reliable contact
•.5m silicone leads resist heat
•ToolPak meter hanging accessory to hold meter to steel
surfaces
•Lightweight soft case to provide optimal protection and storage
Part No. 179/1AC-II.
BENCH TOP 6.5 DIGIT PRECISION
MULTIMETER
The Fluke 8845A Bench Top 6.5 digit Precision Multimeter has
the precision and versatility to handle your most demanding
measurements, on the bench or in a system. These meters are
both high performance and feature rich, yet also remarkably
easy to use. The Fluke 8845A Bench Top 6.5 digit Precision
Multimeter performs the functions you would expect to see in
a multifunction DMM, including measuring volts, ohms, and
amps. Basic V dc accuracy of up to 0.0024%, 10 A current
range, and a wide ohms range give you an unbeatable
combination of measurement capability. You can also use the
the Fluke 8845A Bench Top 6.5 digit Precision Multimeter to
measure frequency and period. The functions of a counter,
capacitance meter, and thermometer are built in for unparalleled versatility. Extend the meters’ utility even more with
their graphical display modes, including Trendplot paperless
recorder mode, statistics and histograms-features you won’t
find on other multimeters.
Part No. 8845A.
INDUSTRIAL MULTIMETER &
INFRARED THERMOMETER COMBO
KIT
Combo Kit includes:
•80BK K-type temperature probe
•Hard Point Test Lead Set
•Hard Meter and Accessory Case
Part No. 179/61-KIT.
ELECTRONIC’S MULTIMETER &
DELUXE ACCESSORY COMBO KIT
Combo Kit includes:
•K-type temperature probe
•SureGrip Heavy Duty Hook Clips
•Electronic Test Probes
•SureGrip Silicone Test Leads resist heat
•ToolPak meter hanging accessory to hold meter to steel
surfaces
•Lightweight soft case to provide optimal protection and storage
Part No. 179/EDA2.
287 FlukeView® FORMS COMBO KIT
Combo Kit includes:
•287 True-RMS Electronics Logging Multimeter
•FlukeView® Forms Software with cable
•Thermocouple Probe
•Test Leads with model 175 modular probe tips
•Medium alligator clips
•Probe caps
•Soft Case
•Batteries – 6 AA Installed
•CD User Manual
Part No. 287/FVF.
289 FlukeView® FORMS COMBO KIT
Combo Kit includes:
•289 True-RMS Industrial Logging Multimeter with
TrendCapture
•FlukeView Forms Software and cable
•Integrated DMM thermocouple probe
•Silicone Test Lead Set
•Alligator Clips
•Magnetic Meter Hanger
•Durable and lightweight Soft Case
Part No. 289/FVF.
DIGITAL MULTIMETER with I400
CURRENT CLAMP COMBO KIT
Combo Kit includes:
•289V Advanced data logging Multimeter
•i400 AC 400A Current Clamp
•Silicone Test Leads
•Alligator Clips
Part No. 289/IMSK.
FLUKE
FLK/2268
Digital Multimeters
DIGITAL MULTIMETER with FLUKE
i400 CURRENT CLAMP COMBO KIT
Combo Kit includes:
•87V Multimeter with temperature frequency, capacitance 250
μs peak minmax
•i400 AC 400A Current Clamp
•Thermocouple bead probe
•Test leads
•Alligator Clips
Part No. 87V/IMSK.
True-RMS Clamp Meters
CLAMP METER
Measurement capability: •400A AC current measurement
•600 V AC and DC voltage measurement •True-RMS
AC voltage and current for accurate
measurements on non-linear signals
•Resistance measurement up to 4 kΩ with
continuity detection •Temperature and
capacitance measurement
Features: •Slim, ergonomic design
•Large, easy to read backlight display
•CAT IV 300V/CAT III 600 V safety rating
•Hold button •Soft carrying case
Includes: •Test leads •Soft case •User’s
manual
Part No. 324.
2000 A CLAMP METERS
•Reliably handle a wide range of highcurrent applications with 2000 A ac + dc
True-RMS, 1400 A AC, and 2000 A DC
•The large 58 mm (2.3”) jaw capacity is
suitable for large or multiple conductors
•CAT IV 600 V, CAT III 1000 V rating for
added user protection •In-rush current
measurement captures ‘power-on’ surge
current with accuracy and repeatability
•Accurately measure frequency up to 1
kHz for optimum troubleshooting •Quickly
analyze readings using the MIN, MAX,
and AVG functions •A large backlit display
allows for easy visibility in low-lit areas
•Use the display hold feature to capture
readings even when the display cannot be
viewed •Use the low-pass filter to smooth
out noisy loads and stabilize readings
#355 Features: High voltage
measurement of 1000 V AC + DC True-RMS, 600 V AC, and
1000 V DC allows the user to perform multiple tests with only
one tool. Resistance to 400K ohms coupled with a continuity
beeper provide the convenience of a multimeter in a clamp
meter.
#355 Includes: •355 clamp meter •C43 Soft carrying case •6
AA batteries •TL224 1.5 m silicone rubber test leads •TP2 Test
Probes •AC285 Alligator Clips •User manual
#353 Includes: •353 clamp meter •C43 Soft carrying case •6
AA batteries •User manual
Part No. 353, Amps only.
Part No. 355.
DETACHABLE JAW AC/DC CLAMP
METER
•200 A AC and DC current measurement with detachable
jaw •600 V AC and DC voltage measurement •Detachable
jaw makes accessing wires and viewing the display easier
•Built in flashlight/torch allows for easy illumination and
identification of wires •CAT III 600 V •Compact design
fits in your hand and can be used while wearing protective
equipment •State of the art signal processing allows for use in
noisy electrical environments while providing stable readings
•Large, easy to read, backlight display automatically sets the
correct measurement
range so you do not
need to change switch
positions while taking a
measurement •Soft carrying
case •Safety conformance:
IEC/EN 61010-1:2001, CAT
III 600 V
Includes: •Coated
instruction card •Safety
information sheet •Soft
carrying case •TL75 test leads •Magnetic
hanging strap •Five AA Alkaline batteries
Part No. 365.
Clamp Meters
EARTH GROUND CLAMP METER
•A wide ground loop resistance range, from 0.025 Ω to 1500 Ω,
to satisfy all requirements •Large jaw opening of 35 mm (1.38
in) for tests on ground conductors and/or equipotential bus
bars •Measurement of ground leakage current, from 0.2 mA
to 1000 mA, without needing to disconnect - ideal for system
troubleshooting •Wide AC current measurement range from
0.2 A to 30 A allows one instrument for
multiple applications •User-defined HI /
LO Alarm limits, for rapid measurement
evaluation •Handy ‘display hold’ button
for capturing readings in hard-to-reach
places •Time saving memory function
automatically records and stores
measured values •Automatic self
calibration ensures correct measurement
every time •Overload protection: 200
A •Carrying case and resistance test
loop included •≥ 8 hours battery life
(continuous operation)
Includes: •Rugged carrying case with
shoulder strap •Resistance test loop •9 V
battery •User’s manual
Part No. 1630.
i1010 AC/DC CURRENT CLAMP
Fluke current clamps extend the current
ranges of Fluke tools. The Fluke i1010
AC/DC current clamp is highly reliable,
measures 1A to 1000A and provides accurate current reading without breaking the
circuit. This clamp measures both AC and
DC current with a large jaw, battery-powered Hall-effect probe that gives access to
difficult to reach areas. Compatible with
most Fluke multimeters.
Part No. I1010.
i30 AC/DC CURRENT CLAMP
The i30 current clamp is based on Hall Effect technology for
use in measurement of both DC and AC current.
Part No. I30, The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for
accurate non-intrusive current measurement.
Part No. I30S, The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate
non-intrusive current measurement.
Part No. I310S, The i310s may be used in conjunction with
oscilloscopes and other suitable recording instruments for
accurate non-intrusive current measurement.
FLUKE
FLK/2268
Testers
INSULATION RESISTANCE TESTERS
•Repetitive or hard-to-reach testing is
easy with the remote test probe •Live
circuit detection prevents insulation
test if voltage > 30 V is detected for
added user protection •Auto-discharge
of capacitive voltage for added user
protection •AC/DC voltage: 0.1 V to
600 V •200 mA Continuity •Resistance:
0.01 Ω to 20.00 kΩ •Save battery
power with auto power off •Read
measurements easily with large, backlit
display •CAT IV 600 V over voltage
category rating for added user protection
•Remote probe, test leads, probes
and alligator clips included with each
tester •Save both time and money with
Automatic calculation of Polarization
Index and Dielectric Absorption Ratio (only available on the
#1507) •Make repetitive tests simple and easy with the #1507’s
Compare (Pass/Fail) function (only available on the #1507)
Includes: •Remote probe •Test leads •Test probes •Alligator
clips •User documentation
Part No. 1507, Insulation test range: 0.01 MΩ to 10 GΩ and
Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V.
Part No. 1503, Insulation test range: 0.1 MΩ to 2000 MΩ and
Insulation test voltages: 500 V, 1000 V.
Part No. 1503/EX-LEAD, Insulation Tester Lead Kit. Comes
with 50 ft. test lead and included items above.
GEO EARTH GROUND TESTERS
•One-button measurement concept
•3- and 4-pole earth ground measurement
•4-pole soil resistivity testing
•Selective testing, no disconnection of ground conductor (1
clamp)
•Stakeless testing, quick ground loop testing (2 clamps)
•Measuring frequency 128 Hz
Includes: •Fluke 1623 tester •2 test leads •Batteries •Users
manual
Part No. 1623.
FLUORESCENT LIGHT TESTER
•Saves time and reduces costs
•Perform all 5 essential lighting tests in under 30 seconds to
pinpoint problems and verify operation when done
•Survives on-the-job handling: drop-tested to survive from a six
ft. (2 m) ladder
•Easy to use: bright indicator light plus audible alert
•Built to last, Easy to maintain: the Fluke 1000FLT’s extendable
test rod is all metal and very rugged. But should the need
arise, this test rod is easily replaced.
Includes: •Quick reference guide •4 AA alkaline batteries
•H1000 holster
Part No. 1000FLT.
10kV INSULATION TESTER
•Test voltages to up 10
kV •CAT III 1000 V, CAT
IV 600 V safety rating
•Warning function alerts
the user that line voltage
is present and gives the
voltage reading up to 600
V AC or DC for increased
user safety •Selectable
test voltages in 50 V steps
from 250 V to 1000 V,
and 100 V steps above
1000 V •Measurements
can be stored in up to 99
memory locations, with each location assigned a unique, user
defined, label for easy recall •Long battery life gives the user
over 750 tests between charges •Automatic calculation of
Dielectric Absorption (DAR) and Polarization Index (PI) with no
additional setup •Guard system eliminates the effect of surface
leakage current on high-resistance measurements •Large
digital/analog LCD for easy viewing •Capacitance and leakage
current measurement •Ramp function for breakdown testing
•Resistance measurements up to 2 TΩ •Timer settings up to 99
minutes for timed tests
Includes: •Test cables with alligator clips (red, black, green)
•Infrared adapter with interface cable •FlukeView® Forms
Basic CD-ROM •AC power cord •Soft carrying case •English
manual •User’s manual on CD-ROM •Quick reference card
•Software license agreement •Registration card •FlukeView®
Forms installation guide •USB-IR cable installation guide
•Heavy duty alligator clip leads
Part No. 1555.
Part No. 1555/KIT, Kit includes IP67 hard carrying case,
Ruggedized Alligator clips, Certificate of calibration, and above
items.
EARTH GROUND TESTER
•3-pole Fall-of-Potential earth testing for basic measurements
•2-pole resistance measurements for added versatility
•Easily capture values with single-button
operation
•Ensure accurate measurements with
automatic ‘noise’ voltage detection
•Hazardous voltage warning offers
increased user protection
•Clearly read and record data with a
large, backlit display
•Rugged holster and design for
tough work environments
•Portable size allows for easy
transportation
•Instantly be alerted to
measurements outside of your
set limit, when you use the adjustable limit setting
•600 V Cat II
Includes: •Users manual •Two measuring leads with alligator
clips, 2 m (6 ft) •One battery, 9 V alkaline •One protective
holster, yellow •One CD-ROM
Part No. 1621.
Part No. 1621-KIT, Kit includes cables, ground stakes, and
above items.
GEO EARTH GROUND TESTER ADVANCED
The Fluke #1625-2 is different from its sibling product the
#1623-2 in a number of ways. The #1625-2 offers automatic
frequency control (AFC) which helps identify existing
interference and chooses a measurement frequency to
minimize it’s effect. It is able to measure earth ground loop
resistance using only clamps. With this test method, two
clamps are placed around the earth ground rod and each are
connected to the tester. No earth ground stakes are used at
all. A known, fixed voltage is induced by the clamp and the
current is measured using the second clamp. It automatically
GEO EARTH GROUND TESTER determines the resistance of the earth ground rod.
BASIC
The Fluke 1623-2 earth ground tester is able to measure earth Part No. 1625-2.
Part No. 1625-2-KIT, Kit includes: GEO Earth Ground Tester,
ground loop resistances using only clamps. With this test
User’s Manual, Batteries, Quick Reference Guide, USB Cable,
method, two clamps are placed around the earth ground rod
and each are connected to the tester. No earth ground stakes 2 Clamps, Professional Carrying Case, 4 Earth Ground Stakes,
are used at all. A known, fixed voltage is induced by one clamp and 3 Cable Reels.
and the current is measured using the second clamp. Then
the tester automatically determines the resistance of the earth
ground rod. This test method only works if a bonded earth
ground system exists for the building or structure under test,
but most are. If there is only one path to ground, like at many
residential applications, the Stakeless method will not provide
an acceptable value and the Fall-of-Potential test method must
be used. With Stakeless testing, the earth ground rod does
not need to be disconnected - leaving the bonded earth ground
system intact during test. Gone are the days of spending time
placing and connecting stakes for each earth ground rod on
your system - a major time saver. You can also perform earth
ground tests in places you’ve not considered before: inside
buildings, power pylons, or anywhere you don’t have access
T+CAN ELECTRICAL TESTER
to soil.
•Safer than traditional solenoid testers •3 forms of AC/DC
Part No. 1623-2.
voltage detection: lights, beeper, and vibration for added user
Part No. 1623-2-KIT, Kit includes: GEO Earth Ground Tester,
User’s Manual, Batteries, Quick Reference Guide, USB Cable, protection and convenience •Still indicates live voltage without
2 Clamps, Professional Carrying Case, 4 Earth Ground Stakes, battery power for added user protection •Extra-heavy-duty,
replaceable test leads for added
and 3 Cable Reels.
durability •CAT IV 600 V, CAT
III 1000 V rated for added user
protection •Continuity beeper,
GFCI Trip, Flashlight •Replaceable
test probes for added convenience
•Probe storage on back for added
convenience •Probe holder for
easier testing •Hazardous voltage
warning light for added user
protection •Test lead strap included
for better test lead management
•AC/DC Voltage: 12V / 600V •Autooff to save battery power
Includes: •User manual •Test lead
wrap •Fluke TP2 test probes •2 AAA Batteries
Part No. T-PLUSCAN.
FLUKE
FLK/2266/2268
Testers
INSULATION RESISTANCE TESTER
•Test voltages to up 5 kV •CAT III 1000 V, CAT IV 600 V safety
rating •Warning function alerts the user that line voltage is
present and gives the voltage reading up to 600 V AC or DC
for increased user safety •Selectable test voltages in 50 V
steps from 250 V to 1000 V, and 100 V steps above 1000 V
•Measurements can be stored in up to 99 memory locations,
with each location assigned a unique, user defined, label
for easy recall •Long battery life gives the user over 750
tests between charges •Automatic calculation of Dielectric
Absorption (DAR) and Polarization Index (PI) with no additional
setup •Guard system eliminates the effect of surface leakage
current on high-resistance measurements •Large digital/
analog LCD for easy viewing •Capacitance and leakage
current measurement •Ramp function for breakdown testing
•Resistance measurements up to 2 TΩ •Timer settings up to 99
minutes for timed tests
Includes: •Test cables with alligator clips (red, black, green)
•Infrared adapter with interface cable •FlukeView® Forms
Basic CD-ROM •AC power cord •Soft carrying case •English
manual •User’s manual on CD-ROM •Quick reference card
•Software license agreement •Registration card •FlukeView®
Forms installation guide •USB-IR cable installation guide
Part No. 1550C.
Part No. 1550C/KIT, Kit includes IP67 hard carrying case,
Ruggedized Alligator clips, Certificate of calibration, and above
items.
ADVANCED MOTOR & DRIVE
TROUBLESHOOTING KIT
VOLT LIGHT
The products in this kit have been specifically selected for both
troubleshooting and preventative maintenance applications.
Establishing preventative maintenance programs are becoming
critical to maintaining the uptime of electrical equipment and
can significantly reduce both planned and unplanned downtime.
Unplanned downtime costs are difficult to calculate, but often
significant. For some industries, it can represent 1% - 3% of
revenue (potentially 30% - 40% of profits) annually.
Includes: •1587 Insulation Multimeter •i400 Current Clamp
•9040 Phase Rotation Indicator •Remote probe •Test leads
•Alligator clips •K-type thermocouple •Hard case •User
documentation
Part No. 1587-MDT.
Non-contact AC voltage detector and LED flashlight with
exclusive dual-sensitivity, combined in one convenient, compact design. The voltage detector glows blue when it’s near
AC voltage, and glows red when it’s at the source. Detects
voltages from 40 V AC to 300 V AC. Voltage detector glows
blue 50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5”) away from
source. Operating temperature 0°C to 50°C.
Ultra-bright white LED with 100,000
hour bulb life. AAA battery
included.
Part No. LVD1.
II IR THERMOMETER, ELECTRICAL
TESTER & VOLTAGE DETECTOR KIT
This kit is designed to help electricians and HVAC technicians
solve problems quicker. Test first for overheated electrical
devices using an IR thermometer; then use electrical test tools
to find out more about the problem.
Includes: •T5-600 •62 MAX+ IR Thermometer •1ACII Voltage
Detector •Soft carrying case
Part No. T5-600/62-MAX+/1AC.
PHASE ROTATION INDICATOR
•3 phase indication
•Indication of phase rotation
•Clear LCD display
•No battery required
Includes: •3 self-retaining test
probes (black) •Alligator clip
•User manual
Part No. 9040.
Power Quality Tools & Power Analyzers
POWER QUALITY CLAMP METER
•AC/DC current: Clamp-on measurement of AC current up to
1400 A RMS and DC current up to 2000 A without breaking the
circuit •Highest safety rating: 600 V CAT IV power analyzer
is rated for use at the service entrance •Accurate in noisy
environments: Clamp meter performs even with distorted
waveforms present on electronic loads with low-pass filter
•Data logging: Identify intermittent faults by logging any power
quality parameter for minutes, or over a month, including
harmonics •Verify batteries: Direct measurement of DC ripple
(%) for battery and DC systems •Troubleshoot harmonics:
Analyze and log harmonics digitally or graphically •Inrush
current: Capture and analyze
nuisance tripping, from 3 seconds
to 300 seconds •Easy to use:
Easily confirm power meter setup
with large backlit color display of
waveforms and trends •3-Phase
power: Built in capability for
balanced loads
Includes: •345 Power Quality
Clamp Meter •Soft carrying case
•Power Log software •Test leads
•Alligator clips •Test probes •USB
cable •International AC adapter /
battery eliminator •Printed English
language user manual •Multilanguage manual CD
Part No. 345.
705 LOOP CALIBRATOR
For a powerful loop calibrator at a very affordable price, choose
the new Fluke 705 Loop Calibrator. This feature-rich solution to
loop calibration, maintenance and repair offers:
•A large display and simple, pushbutton interface for ease
of use •Simultaneous mA and % readout for quick, easy
interpretation of readings •mA accuracy of 0.02% •Push
button 25% steps for fast, easy linearity checks. Save time
over traditional knob type controls. •”Span Check” for fast
confirmation of zero and span •Selectable slow ramp, fast
ramp, and step to provide smooth outputs for valve slewing and
loop functional tests •24 volt internal loop supply, so you can
power and read a transmitter at the same time without carrying
a DMM •Single 9V battery that is
easily changed •0 - 20 mA or 4 20 mA default start up modes
Includes: •Alligator Clips
•Protective yellow holster with
Flex-Stand™ •Instruction sheet
•TL75 safety-designed test lead set
•NIST- traceable calibration report
and data
Part No. 705.
707 LOOP CALIBRATOR
This feature-rich solution combines the best features pushbutton and knob-base loop calibrator and offers:
•Large display and simple, quick-click interface for easy
one-handed operation •Simultaneous mA and % readout for
quick, easy interpretation of readings •mA accuracy of 0.015%,
superior to other loop calibrators in this price range •1 µA
resolution for mA source, simulate and measure •Push button
25% steps for fast, easy linearity checks •0-100% “span check”
for fast confirmation of zero and span •Selectable slow ramp,
fast ramp, and step ramp to provide smooth outputs for valve
slewing and loop functional tests •24 volt internal loop supply,
so you can power and read a transmitter at the same time
without carrying a DMM •Measures V DC to 28 V •Single 9V
battery that is easily changed without
braking calibration seal
•0 - 20 mA or 4 - 20 mA default
start up modes •Innovative output
adjustment dial with 1 µA and 100
resolution •HART ™ mode connects
250 Ω resistor in series with 24 V
loop for compatibility with HART
communicators
Includes: •Alligator Clips •Protective
yellow holster with Flex-Stand™
•Instruction sheet •TL75 safetydesigned test lead set •NISTtraceable calibration report and data
Part No. 707.
FLUKE
FLK/2266
Power Quality Tools & Power Analyzers
PRECISION LOOP CALIBRATOR
The Fluke 709 Precision Loop Calibrator is built around a user
friendly interface with a Quick-Set rotary encoder knob. The
protective holster easily fits into a technician’s hand and the
large backlit display is easy to read, even in dark, cramped
worked areas. The 709 offers: •Best-in-class accuracy at
0.01% reading •Small rugged design operates on (6) standard
AAA batteries •Intuitive user interface with Quick-Set knob
for fast setup, easy use •Built in selectable 250 Ω resistor for
HART communication •24 V DC loop power with mA Measure
Mode (-25% to 125%) •Resolution of 1 µA on mA ranges
and 1 mV on voltages ranges •Simple two wire connection
for all measurements •Auto
Shutdown to conserve
battery life (adjustable up
to 30 minutes) •Variable
step & ramp time in seconds
•Adjustable span selection
(0 to 20 mA or 4 to 20 mA)
•Valve Test (simulate defined
mA values with % keys)
Includes: •Alligator Clip Set
•420i Test Leads •Soft Case
•Six AAA batteries (installed)
•Product Manual CD-ROM
•Quick Reference Guide
•Safety Information
Part No. 709.
VOLT/mA CALIBRATOR
•Measure loop current (0-20 mA, 4-20 mA) signals with very
high accuracy of 0.015% and 1 mA resolution •Measure
voltage output process signals from PLCs, transmitters
•Source or simulate 24 mA loop current •Source voltage to
100 mV or 10V •24V loop supply with simultaneous current
measurement •Enhanced voltage and current measure and
source accuracy •Improved battery life •250 ohm HART
resistor with loop power •Holster
features test lead storage •Compatible
with toolpack magnetic hanging system
•Step and linear ramp output function
•Configurable zero and span settings
Includes: •Protective Yellow Holster
with Test Lead Storage •Instructions
Sheet (14 languages) •Single 9V
alkaline battery •Test Leads and
Alligator Clips •NIST- traceable
calibration report and data
Part No. 715.
RTD PROCESS CALIBRATOR
THERMOCOUPLE CALIBRATOR
MILLIAMP PROCESS CLAMP METER
ProcessMeter™
•Measure temperature from RTD output •Simulate RTD output
•Operates with seven types of RTDs •Measure additional
RTDs using Ohms measurement function •Simulate additional
RTDs using Ohms source function •ºF or ºC selectable •Four
shrouded banana jacks •Compatible
with Rosemount® pulsed RTD
transmitters (pulses > 10ms)
•Holster features test lead storage
•Compatible with toolpack magnetic
hanging system
with test lead storage •Instructions
alkaline battery •Test Leads and
Alligator Clips •NIST-traceable
Part No. 712 .
•Best in class 0.2 % accuracy •0.01 mA resolution and
sensitivity •Measure 4 to 20 mA signals without ”breaking the
loop” •Measure mA signals for PLC and control system analog
I/O •Dual backlit display with both mA measurement and
percent of 4 to 20 mA span •Measurement Spotlight illuminates
hard to see wires in dark enclosures •Detachable clamp with
extension cable for measurements in tight locations •Measure
10 to 50 mA signals in older control systems using the 99.9
mA range •Automatically change the 4 to 20 mA output for
remote testing •Power saving features, auto-off, backlight
timeout extend battery life •Hold function captures and displays
changing measurements •Measure 4 to
20 mA signals with in-circuit measurement
•Simultaneous mA in-circuit measurement
with 24V loop power for powering and
testing transmitters •Source 4 to 20 mA
signals for testing control system I/O or I/Ps
•mA output linear ramp or 25% step output
•Automatically change the 4 to 20 mA output
for remote testing
Includes: •Four AA alkaline batteries
(installed) •Soft carrying case •Test leads
•AC 72 detachable clip •Mini hook test leads
•Instruction sheet •Hanging tool with hook
and loop strap
Part No. 772.
Vibration Meters
VIBRATION METER
•Innovative sensor design helps minimize measurement variations caused
by device angle or contact pressure •Consistent data quality at both
low and high frequency ranges •Four-level scale indicates severity of
problems for overall vibration and bearing condition •Exportable data via
USB •Trending in Microsoft® Excel using built-in templates •Overall
vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and
displacement units of measurement for a wide variety of machines •Crest
Factor+ provides reliable bearing assessment using direct sensor tip
measurements between 4,000 Hz and 20,000 Hz •Colored lighting system
(green, red) and on-screen comments indicate how much pressure needs to
be applied to take measurements •Temperature measurement with Infrared
Temperature Sensor increases diagnostic capabilities •On-board memory
holds up to 3,500 measurements •Audio output for listening to bearing
tones directly •External accelerometer support for hard to reach locations
•Flashlight for viewing measurement locations in dark areas •Large screen
with high resolution for easy navigation and viewing
Includes: •USB cable •Storage case •Belt holster •Quick reference guide
•CD-ROM •Two (2) AA batteries
Part No. 805.
•Measure temperature from TC output •Simulate TC output
•Operable with nine types of thermocouples •Calibrate linear
TC transmitter with mV source function •Selectable ºF or ºC
•Thermocouple mini-jack termination •Holster features test
lead storage •Compatible with toolpack
magnetic hanging system
with test lead storage •Instructions
alkaline battery •NIST-traceable
Part No. 714 .
The Fluke 787 ProcessMeter™ puts a complete troubleshooting
solution in the palm of your hand. Get in touch with more
information, faster and easier with the newest member of the
Fluke 80 Series, the 787 ProcessMeter. The 787 gives you the
measurement capabilities you expect from our rugged, reliable
DMMs plus the ability to source, simulate, or measure DC
current with 1 microamp resolution and accuracy of 0.05%. Put
it all together and you have the ideal tool for troubleshooting
and calibrating current loop applications. So if you’re tired of
always tracking down a calibrator, lugging around two tools
and switching back and forth, get the single best solution
for doubling your power. The 787
ProcessMeter from Fluke.
Includes: •Alligator Clips •Protective
Yellow Holster with Flex-Stand™ •One
9V alkaline battery •Quick Reference
Guide •Safety-Designed Test lead Set
Part No. 787.
FLUKE
FLK/2266/2267
Vibration Meters
HANDHELD VIBRATION TESTER
Take a vibration expert along
Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing. The Fluke 810 helps you locate and
diagnose common mechanical problems and prioritize repair actions with no prior machine history.
Features: •On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing
unplanned downtime •Fault severity scale with four severity levels helps you prioritize maintenance work •Repair recommendations advise technicians on corrective action •On-board context
sensitive help provides real-time tips and guidance to new users •2 GB expandable on-board memory provides enough space for your machinery’s data •Self-test function ensures optimal performance and more time on the job •Laser tachometer for accurate machine running speed promotes confident diagnoses •Tri-axial accelerometer reduces measurement time by 2/3 over single axis
accelerometers •Viewer PC Software expands data storage and tracking capacity
Use the Fluke 810 Vibration Tester to:
•Troubleshoot problem equipment and understand the root cause of failure •Survey equipment before and after planned maintenance and confirm the repair •Commission new equipment and
ensure proper installation •Provide quantifiable proof of equipment condition and drive investment in repair or replacement •Prioritize and plan repair activities and operate more efficiently
•Anticipate equipment failures before they happen and take control of spare parts inventories •Train new or less-experienced
technicians and build confidence and skill across the team
Includes: •Vibration Tester with diagnostic technology •Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive,
accelerometer quick-disconnect cable •Laser tachometer and storage pouch •Smart battery pack with cable and adapters
•Shoulder strap and adjustable hand strap •Viewer PC software •Mini USB to USB cable •Getting Started Guide, illustrated
quick reference guide, Users Manual CD-ROM •Carrying case
Part No. 810.
Part No. 810S, Replacement vibration sensor.
Thermometers
60 SERIES HANDHELD INFRARED
THERMOMETERS
These handheld portable tools enable professionals to monitor
the status of electrical motors and electrical panels, research
heating and ventilation problems and diagnose car malfunctions
with ease.
INFRARED & CONTACT
THERMOMETER
•IR thermometer for quick measurements up close, or at a
distance, without a ladder •Contact thermometry capability, compatible with all standard mini-connector type K
thermocouples, preserves your investment in thermocouples
•Fabric hook-and-loop fastener pipe probe for superheat and
Part No. 61, Features: •Bright laser beam provides easy target- sub-cooling and other contact and ambient measurements
ing •Display clearly supplies data at a glance •Shock-absorb- •Single-point laser sighting •Temperature range of -40 °C
ing holster increases ruggedness •0.2 °C (0. 5 °F) resolution
to 550 ° C (-40 °F to 1022 °F) covers most industrial and
up to 275 °C (525 °F) •Backlight illuminates the screen in the
residential applications •Easy emissivity adjustment (Lo, Med,
dark •Automatic sleep mode after 7 seconds extends battery
Hi) for measuring pipes and other shiny materials more aclife •Alkaline batteries provide 4000 typical measurements
curately •Lightweight (just 12 ounces/340 grams) and portable
•Very easy to use •Efficient – no need to shut down equipment
Part No. 63, Features: •High-resolution optics •High accuracy: when making IR measurements •MIN, MAX, and DIF functions
1 % and repeatability: 0.5 % •MAX temperature display •Laser help you quickly identify problems •Scan large areas or small
targeting •Backlit display •Expanded measurement range up
objects quickly and efficiently
to 535 °C (999 °F)
Includes: •561 IR thermometer •K-Type thermocouple •Fabric
hook-and-loop fastener pipe probe •Hard carrying case •2 AA
batteries •Users manual
Part No. 561.
61
INFRARED & CONTACT
THERMOMETERS
•Easily access advanced features with the soft-key buttons and
dot-matrix display •Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your
thermocouple investments •Confidently measure a wide variety
of surfaces, with the adjustable emissivity feature, including a
built-in material table •Capture multiple points of data (up to 99
with the 568, and 20 with the 566), for downloading and recalling later •Easily adapt to lighting conditions with 2 levels of
backlight •Audible and visual alarms instantly alert you to measurements outside of your set limits •Quickly identify problems
with the MIN, MAX, AVG, and DIF functions •Make contact
thermometer measurements right away with the included TypeK thermocouple bead probe •Confidently troubleshoot equipment with 1 % measurement accuracy •Versatile interface with
6 languages from which to choose
Includes: •Thermocouple K bead probe •Durable hard case
•2 AA batteries •Getting Started guide in 6 languages •User’s
Manual on CD in 6 languages •2-year warranty
Part No. 566, Temperature
range: -40 °C to 650 °C (-40
°F to 1202 °F); Distance to
Measurement Spot Size: 30:1.
Part No. 568, Temperature
range: -40 °C to 800 °C (-40
°F to 1472 °F); Distance to
Measurement Spot Size: 50:1.
63
DIGITAL THERMOMETERS
•Relative time clock on MIN, MAX, and AVG provides a time reference for major events
•Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy •J, K, T, E, N, R, and S type thermocouple (temperature sensors). •Readout
in °C, °F, or Kelvin (K) •Splash and dust resistant case protected by impact absorbing
holster •User-friendly front panel is easy to set up and operate •Sleep mode increases
battery life; typical 1000-hour battery life •Battery door allows easy battery replacement
without breaking the calibration seal
Part No. 51-2, Single Input.
Part No. 52-2, Double Input.
FLUKE
FLK/2267
Thermometers
DATA LOGGING DIGITAL
THERMOMETERS
INTRINSICALLY SAFE IR
THERMOMETER
HIGH-TEMPERATURE INFRARED
THERMOMETER
FoodPro FOOD SAFETY
THERMOMETER
FoodPro PLUS FOOD SAFETY
THERMOMETER
VISUAL IR THERMOMETER
•Relative time clock on MIN, MAX, and AVG provides a time
reference for major events •Electronic Offset function allows
compensation of thermocouple errors to maximize overall
accuracy •Measures J, K, T, and E-types of thermocouples
•Readout in °C, °F, or Kelvin (K) •Splash and dust resistant
case protected by impact absorbing holster •User-friendly front
panel is easy to set up and operate •Sleep mode increases
battery life; typical 1000-hour battery life •Battery door allows
easy battery replacement without breaking the calibration seal
•Additional thermocouple types R, S, and N (for a total of 7
different types) •Recall function allows logged data to be easily
reviewed on the meter display •USB
communication port allows data to be
exported to optional FlukeView Forms®
Temperature PC software for further
analysis and graphing
•Data Logging up to 500 points of data
with user adjustable recording interval
Part No. 53-2-B, Single Input.
Part No. 54-2-B, Double Input.
The easy-to-use and highly accurate Fluke FoodPro noncontact thermometer instantly measures surface temperature,
allowing users to make rapid and frequent non-contact
temperature measurements without risk of
cross contamination.
•Infrared temperature range from -35 to
275 ºC
•HACCP check lights for instant recognition of
safe/unsafe temperatures
•LED target illumination highlights the entire
measurement spot for accurate targeting
•Hand washable (IP54 sealed)
Includes: •AA battery •Quick Start guide
Part No. FP.
VISUAL IR THERMOMETER
ELECTRICAL COMBO KIT
Get extra value along with the complete solution with the VT04
Visual IR Thermometer Electrical Combo Kit. Troubleshoot and
solve problems more efficiently. Get a VT04, Fluke 376 Clamp
Meter and Fluke 117 Digital Multimeter today and save.
Includes: •VT04 Visual IR Thermometer •376 AC/DC TrueRMS Clamp Meter •117 Electricians’ Multimeter
Part No. VT04-ELEC-KIT.
•Meets intrinsically safe certifications in Class I Div 1 and Div
2 or Zone 1 and 2 hazardous environments from recognized
safety agencies around the world •Measure -40 °C to 800
°C /-40 °F to 1472 °F •Conductive Case for carrying the
IR thermometer safely into hazardous area •Easily access
advanced features with the soft-key buttons and graphical
display •Measure small objects from further away, with a
distance-to-spot ratio of 50:1 •Compatible with mini-connector
K-type thermocouple (KTC) probe •Confidently measure a
wide variety of surfaces with the adjustable emissivity feature,
including a built-in material table •Capture up to 99 points
of data •Troubleshoot equipment with ± 1 % measurement
accuracy •Versatile interface with five languages from which
to choose
Part No. 568EX/ETL.
The Fluke FoodPro Plus combines an infrared non-contact
thermometer for surface scans with a probe thermometer for
internal temperature readings. An integrated countdown timer
with alarm monitors line checks as well as cooking and cooling
intervals.
Includes all of the FoodPro features, plus
the following:
•Built-in fold-out probe for measuring internal
food temperatures
•Probe temperature range -40 to 200 ºC
•Countdown timer to monitor cooking, cooling
and HACCP exposure times
•Backlit display for clear readings in poorly
lit areas
•MAX temperature displayed for quick
reference
Includes: •Built-in contact probe •9 V alkaline battery •Quick start guide •Operator’s
guide •Soft carry pouch
Part No. FP-PLUS.
Part No. FP-PROBE, Replacement probe.
VISUAL IR THERMOMETER HVAC
COMBO KIT
Save money and equip yourself with the VT04, Fluke 902
Clamp Meter and Fluke 116 Digital Multimeter. Together, these
tools equip HVAC technicians to troubleshoot and diagnose the
most stubborn issues
Includes: •VT04 Visual IR Thermometer •902 True-RMS
HVAC Clamp Meter •116 Digital Multimeter Designed Specifically for HVAC Professionals
Part No. VT04-HVAC-KIT.
•Measure -30°C to 900°C (-22°F to 1652°F) •60:1 distance
to spot ratio with dual laser sighting for fast, accurate targeting
•Multi-language interface (user select) •Current Temperature
plus MAX, MIN, DIF, AVG temperature displays •Compatible
with standard mini-connector K-type thermocouples, including
ones you already own and have installed •Adjustable emissivity and predefined emissivity table •Infrared and thermocouple
temperature on backlit display •Last reading Hold (20 seconds)
•High and low temperature alarm •Data storage and review
(99 data sets) •Tripod mount •12 or 24 hour clock •USB 2.0
computer interface cable •FlukeView® Forms documenting
software
Includes: •K-type thermocouple bead probe •Durable hard
case •USB 2.0 computer
interface cable
Part No. 572-2.
•Visual image and infrared heat map blending - Identify the
exact location of the potential issue by blending the visual
image with the heat map overlay at 0%, 25%, 50%, 75%, and
100% infrared with one button •NEAR and FAR mode - Align
the visual and thermal lenses to correctly identify the location
of the issue •Center measurement box - See the exact area of
temperature measurement right on the screen •Temperature
alarms and automated monitoring features - Identify intermittent
problems by monitoring equipment over time or get alerts
when a temperature is outside the expected range •Hot and
cold markers - Instantly identify hottest and
coldest spots within the field of view •Save
in .bmp or .is2 format - Choose .bmp when
all you want is the image, or use .is2 format
that can be edited in SmartView® software
•SmartView® reporting software - Optimize
the image blending and palette and quickly
create professional reports •Pocket-size
design - Handy when you need it; easily fits
in your tool bag or pocket •Intuitive interface
- Get to work as soon as you take it out of
the box
Includes: •VT04A Visual IR Thermometer
•Soft case •Micro-SD card •Micro-SD
conversion adapter to standard •AA batteries
(4) •Printed quick reference guides
Part No. VT04A.
VISUAL IR THERMOMETER HVAC
COMBO KIT
The VT04 and Fluke 1507 Insulation Resistance Tester are
ideal companions for troubleshooting and preventive maintenance applications
Includes: •VT04 Visual IR Thermometer •1507 Insulation
Resistance Tester
Part No. VT04-MAINT-KIT.
FLUKE
FLK/2267
Thermometers
IR THERMOMETER, CLAMP METER & VOLTAGE
DETECTOR KIT
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first
for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem
Includes: •Fluke 62 MAX+ IR Thermometer •Fluke 323
True-RMS Clamp Meter •Fluke 1AC II VoltAlert
Voltage Detector •C115 Soft Case
Part No. 62-MAXPLUS-323/1AC.
LASER DISTANCE METER/INFRARED THERMOMETER
COMBO KIT
The most rugged Fluke 62 MAX+ IR thermometer teamed with the easy to use 414D Laser
Distance Meter has everything you need to configure layout and to troubleshoot
electrical/HVAC problems quickly.
•Use the IR thermometer to test for overheating in electrical devices and HVAC components •Use the laser distance meter to
determine distance, area, and volume for space configuration.
Includes: •414D Laser Distance Meter •62 MAX+ IR
Thermometer
Part No. 414D/62-MAXPLUS.
Laser Distance Meters
IP54 LASER DISTANCE METER
•Measures up to 100 m (330 ft) •Higher accuracy: +/-1 mm (0.04 in) •4-line display shows you
even more data at a glance •Inclination sensor assists with height tracking, leveling, and indirect
horizontal distance measurements when line-of-sight is blocked by an obstacle •Corner angle
feature, allows you to determine the angle of a corner •Compass provides a “heading” for your
distance measurements •Stores 20 complete displays for quick recall •Backlight •Tripod mode
allows you to mount the meter to a tripod when measuring long distances •Full Pythagoras
function for height measurements •Audible keypad feedback •Stake Out feature helps you
mark out defined lengths such as when constructing wooden frames •Automated End-piece
Correction for measuring from an edge or corner •A built-in sensor detects the position of this
bracket and automatically changes the reference point •Minimum/Maximum function •Enhanced
environmental protection: IP54-rated as dust and water spray resistant •Improved battery life of
5000 measurements with auto shut-off feature
Part No. 424D.
Thermal Imagers
Ti100 THERMAL IMAGER
Fluke Ti100 general purpose thermal imager includes a
160x120 9Hz infrared detector with 0.10°C thermal sensitivity
•Focus-free infrared: The Ti100 offers the highest performing
one-handed, focus-free infrared system available. From four
feet (1.2 M) and beyond you’ll always be in good focus no matter what you’re inspecting.
•Laser pointer: A laser pointer allows you to accurately point to
an area of concern to a colleague or customer.
•Built rugged: The new Fluke imagers are the most rugged and
reliable, lightweight professional point-and-shoot thermal imagers on the market. They’ve been put through a battery of tests,
including two-meter drops, vibration, extreme temperature and
humidity, and electromagnetic/radio frequency interference
testing to ensure they survive in your environment.
•One-hand operation: The Ti100 has been designed for simple,
one-handed operation. Its lightweight, slim
profile makes it easy to operate in either
landscape or portrait format - your choice.
All so you’ll have one hand free to steady
yourself or hold another tool.
Part No. TI100/9HZ.
Ti110 THERMAL IMAGER
Fluke Ti110 thermal imager industrial/commercial applications
features a 160x120 30Hz infrared sensor with 0.10°C thermal
sensitivity and the industry’s first IR Fusion image blending in a
point-and-shoot camera
•Exclusive IR-OptiFlex focus system - ensures that images are
in good focus from 1.2 meters (4 ft.) and beyond for optimum
image clarity and scanning convenience. For shorter distances
change to manual mode with the touch of a finger
•Compatible with Fluke Connect
•IR-PhotoNotes annotation system - Quickly identify and
keep track of inspection locations by adding digital images of
important information surrounding areas •Detect issues faster
with precisely blended visual and infrared images with patented
IR-Fusion technology with AutoBlend mode •Multi-mode video
recording - focus-free video in visible light and infrared with full
IR-Fusion •Easily communicate the location of problems with
the Electronic 8-Point Cardinal Compass
Includes: AC power adapter, lithium ion smart battery, USB
cable, SD memory card, hard carrying
case, soft transport bag, adjustable
hand strap (left- or right-handed use),
printed users manual, SmartView®
software and warranty registration
card.
Part No. TI110/30HZ.
FLUKE
FLK/2264/2265
Thermal Imagers
Ti200 & Ti300 THERMAL IMAGER
•Equipped with new LaserSharp™ Auto Focus •Features
wireless connectivity compatible with Fluke Connect. •Detect
and communicate issues faster with patented Fluke IR-Fusion®
technology with AutoBlend™ mode •Faster communication with wireless image transfer directly to your PC, Apple®
iPhone® or iPad® •One-handed, easy-to-use user interface
•Ruggedized high resolution 640x480 capacitive touch screen
for quick menu navigation •Capture additional digital images
to show location or additional site details with IR-PhotoNotes™
Annotation System •Standard and radiometric video recording*
•Streaming video (USB and HDMI) •Text* and voice recording
and annotation gets additional details saved with the image file
•High-temperature measurement •Included SmartView® and
SmartView Mobile App Analysis and
Reporting Software
Includes: •Thermal imager with standard infrared lens •AC power supply
and battery pack charger (including mains adapters) •Two, rugged
lithium ion smart battery packs •Micro
SD memory card with SD adapter
•3m USB cable •3m HDMI video
cable •SmartView® software with free
software upgrades for life •Rugged,
hard carrying case •Soft transport bag
•Adjustable hand strap •Printed user’s
manual •CD user’s manual •Warranty
registration card
Part No. TI200/60HZ, 60Hz 200X150.
Part No. TI300/60HZ, 60Hz 200X180.
Ti9 THERMAL IMAGER
Fluke Ti9 9Hz entry-level thermal imager for general purpose
applications. Features a 160x120 infrared detector with 0.20°C
thermal sensitivity and a temperature measurement range of
-20°C to 250°C (-4°F to 482°F).
•Superior resolution to view more essential details
•Small details are visible in a perfectly focused image
•Large widescreen full VGA color LCD display
•Temperature range supports basic electrical and mechanical
applications
•Intuitive, three-button menu, simply navigate with the push of
a thumb
•Adjustable focus
•Just point, shoot and the image is captured. It is that easy.
•Withstands dust and water, IP54 rating
•Withstands a drop test of 2 meters
•Protective lens cover
Part No. TI9-9HZ.
THERMAL IMAGING SCANNER
Fluke TiS thermal imaging scanner for rapid visual temperature
analysis. Features a 120x120 infrared detector with 0.1° 9Hz
thermal sensitivity
The Fluke TiS Thermal Imaging Scanner, for building diagnostics, is the most affordable thermal imaging camera that meets
the proposed RESNET infrared inspection standard. Now Fluke
quality, durability, and performance are available in a thermal
imager engineered for the value-conscious building professional. The Fluke TiS is an entry level thermal imager for quick,
easy, and accurate problem identification and troubleshooting
designed specifically for the building inspection professional.
Includes: •TiS Thermal Imaging Scanner with standard infrared
lens •AC power supply/battery charger (including mains adapters) •SD memory card •Multi-format USB memory card reader
for downloading images •SmartView® software with free
software upgrades for life •Rugged, hard carrying case •Soft
transport bag •Adjustable hand strap •Users manual on CD
•Warranty registration card •Interactive training DVD
Part No. TIS-9HZ.
Test Tools - Fluke Connect Wireless System
FC WIRELESS AC/DC CURRENT
MODULE
FC WIRELESS DC VOLTAGE MODULE FC CONNECTOR
This fully functional DC voltage meter that wirelessly relays DC
voltage measurements to other Fluke Connect enabled master
units. The Fluke v3001 FC is capable of measuring up to
1000V DC while logging up to 65,000 readings. The V3001 FC
includes a set of TL222 Test Leads, AC220 Alligator Clips and a
magnetic hanging strap.
Part No. V3001FC.
Fluke Connect ir3000 FC Connector allows you to wirelessly
transfer data from your existing Fluke Connect Tools to your
smart phone.
•Fits over the IR port of your existing Fluke Connect Tools
•Upgradable by USB
•Immediately enables you to graph, save and share the tool’s
reading with your team from your smart phone
Part No. IR3000FC.
A3000 FC KIT
A3001 FC KIT
T3000 FC KIT
The Fluke A3002 FC current module wirelessly relays measurements from a current clamp accessory to Fluke Connect
enabled master units. The A3002 FC was designed to be used
with the i410 or i1010 AC/DC current clamps (not included).
Capable of measuring up to 400A AC/DC when used with the
i410 current clamp, and either 600A AC or 1000A DC when
combined with the i1010 current clamp.
Internal logging feature allows for up to
65,000 readings to be stored. The A3002
FC can be utilized as a standalone unit or
combined with other Fluke Connect modules, allowing you to completely customize
your wireless test tool suite.
Part No. A3002FC.
Fluke Connect Enabled Kit for measuring and testing AC
Current. Includes the A3000 FC Clamp Meter and 3000 FC
Multimeter.
Part No. A3000FC-KIT.
Fluke Connect Enabled Kit with iFlex clamp module for measuring and testing AC Current. Includes the A3001 iFlex Module
and 3000 FC Multimeter
Part No. A3001FC-KIT.
Fluke Connect Enabled Kit with wireless K-Type temperature
module. Includes the T3000 K-Type temperature module and
3000 FC Multimeter.
Part No. T3000FC-KIT.
FLUKE
FLK/2263/2264
Test Tools - Fluke Connect Wireless System
V3000 FC KIT
V3001 FC KIT
V3003 FC KIT
AIRBORNE PARTICLE COUNTER
CARBON MONOXIDE METER
ASPIRATOR KIT
Fluke Connect Enabled Kit with wireless AC Voltage module.
Includes the V3000 module and 3000 FC Multimeter.
Part No. V3000FC-KIT.
Fluke Connect Enabled Kit with wireless DC Voltage module.
Includes the V3001 module and 3000 FC Multimeter.
Fluke Connect Enabled Kit with wireless DC and AC Voltage
modules. Includes V3000 and V3001 Voltage modules, as well
as the 3000 FC Multimeter.
Indoor Air Quality Tools
The new Fluke 985 Particle Counter is the preferred choice for
HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining
airborne particle concentrations
•Six channels and particle size range of 0.3 - 10.0 µm: Assures
accurate measurements even for critical locations requiring
ISO Class 5 - 9 certification •Ultra-lightweight and ergonomic
design: Promises easy single-hand operation in tight or awkward spaces with less operator fatigue •Long battery life: Ten
hours of standard-use battery life to last a full work day •Large
3.5 QVGC Color display: Easy navigation and viewing with the
intuitive icons and large font options •10,000 record storage:
Quick access to historical data •On-screen data presentation:
Data can be viewed in a traditional tabular or trend graph view
at the user’s preference •Personalized setting and configurations: Customizable settings for the display, sample methods,
and alarm settings for sample count •Data export options:
Download data to a PC using a USB memory
stick, USB cable or Ethernet connection. No
special software is required to download
or view data •Option password
control: Confirms security when required •USB/Ethernet charge cradle:
Assures device is always ready to go
when needed
Part No. 985.
•Rugged case and electronics •Large LCD displays CO levels
from 0 to 1000 ppm •Bright back-light allows easy screen viewing under dim lighting conditions •Beeper triggers with increasing frequency as CO levels rise •MAX Hold function stores and
displays the maximum CO level •Automatic sensor zeroing and
self-test sequence upon start-up •CO level beeper can be silenced if desired •Automatic power-off after 20
minutes extends battery life •Easy to replace
battery •Replaceable sensor extends tool life
•C50 soft carrying case, battery and instruction
sheet •Stabilized electrochemical CO specific
sensor •Typical three year sensor life; one
year calibration cycle •Battery life typical 500
hours with alkaline battery
Part No. CO-220.
•Sample flue gas with your Fluke #CO-220 using the #CO-205
Aspirator Kit •Draw flue gas samples up to 370°C (700°F)
reliably for measurement with the Fluke #CO-210 Carbon Monoxide probe or Fluke #CO-220 Carbon Monoxide meter •The
#CO-205 aspirator accessory kit contains all the components
necessary to provide a clean sample for the Fluke family of gas
measuring devices
Part No. CO-205.
HVAC/R REFRIGERANT LEAK
DETECTOR FLASHLIGHT
The compact, easy-to-use, Fluke #RLD2 UV flashlight uncovers
refrigerant leaks instantly. Use the UV light to find the leakage
area, then, use the laser pointer to pinpoint the exact leak location. With 100,000 hours of life, and four operating modes, this
versatile leak detector is a must have for HVAC Technicians.
Features and benefits of the #RLD2:
•Six UV LEDs (395 nm wavelength) detect leak detection dyes
•Laser pointer clearly locates center of the UV field for accuracy
•Three LED flashlight with 100,000 hour LED life
•Operating temperature 0°C to 50°C
•Four operating modes: flashlight, UV light, laser light, UV/laser
light combination
•Convenient detachable key chain carabiner and AAA battery
included
Part No. RLD2.
FLUKE
FLK/2262
Accessories
INTEGRATED DMM
TEMPERATURE PROBE
TYPE K MALE MINICONNECTORS
TYPE-K VELCRO
THERMOCOUPLE
TEMPERATURE PROBE
TYPE K PIPE CLAMP KIT
SureGrip™ AIR
TEMPERATURE PROBE
SureGrip™ PIERCING
TEMPERATURE PROBE
SureGrip™ TAPERED
TEMPERATURE PROBE
SURFACE PROBE
•Type-K thermocouple with tapered tip for use
in air, non-caustic gas and surface applications
•Measurement range:-40 to 816°C
Part No. 80PK-26.
•Designed for measuring the temperature of
flat or slightly convex surfaces, this K type
probe is ideal for hot rollers and plates.
•Measurement range: 0 to 260°C
Part No. 80PK-3A.
SureGrip™ PIERCING
TEMPERATURE PROBE
EXTENSION WIRE KIT
THERMOCOUPLE MODULE
3 PC. ALLIGATOR CLIP SET
•Operates with T-type thermometers
•Measurement range : -196 to 350°C
Part No. 80PT-25.
•Extending and repairing T-type thermocouple
wires •Kit includes 3 meters of thermocouple
wire and 1 pair of male/female mini-connectors
•Maximum continuous exposure temperature:
260°C •Designed for T-type thermometers
Part No. 80PT-EXT.
ALLIGATOR CLIPS &
ADAPTERS
HEAVY DUTY INSULATION
PIERCING TEST CLIP
LED PROBE LIGHT
MINI HAT LIGHT
Type-K thermocouple with standard banana
jack •Convenient one piece construction
•Compatible with DMMs with temperature measurement functions •Measurement range:-40
to 260°C
Part No. 80BK-A.
•Designed with SureGrip, a superior gripping
surface made from thermoplastic rubber.
•Type-K thermocouple for use in air and noncaustic gas measurements •Bead protected
by perforated baffle •Measurement range:-40
to 816°C
Part No. 80PK-24.
Includes #AC285, a pair of red and black extra
large alligator clips plus adaptors to securely
attach the #AC285 alligator clips to Fluke fused
test probes #FTP-1 and #FTPL-1.
Part No. AC285-FTP.
•Isothermal screw terminal for K wire
•Suitable for up to 20 gauge thermocouple wire
•Color-coded to industry standards (K-yellow)
•Two male mini-connectors per package
•Pack of 2
Part No. 80CK-M.
•K-type probe designed for use in soft or
semi-hard materials, and can be used in liquid
or gel. Ideal for food service applications
•Designed with SureGrip, a superior gripping
surface made from thermoplastic rubber.
•Measurement range : -40 to 350°C
Part No. 80PK-25.
Plunger style insulation piercing clip with
insulation jaws. The stainless steel tip pierces
insulated wires for otherwise inaccessible test
points. Recommended for use with TL224 test
leads. Compatible with all test leads with standard 4 mm, shrouded banana plug. Pierces insulated wires from 30 AWG (0.25 mm square)
to 14 AWG (1.5 mm square). Small pin allows
self-healing of the insulation. CAT IV 600V,
CAT III 1000 V, 5 A rating. UL listed
Part No. AC89.
Kit Includes: •80PK-8 for pipe diameters of 6
mm to 32 mm •80PK-10 for pipe diameters of
32 mm to 64 mm •Soft carrying case
Designed to be compatible with any temperature measuring instrument that accepts Type-K Part No. 80PK-18.
thermocouples, has a miniature thermocouple
connector, and has cold reference junction
compensation. Designed for hands free
measurement of HVAC temperature measuring
applications. Use
multiple probes and
leave in place for
route based routine
maintenance.
Part No. 80PK-11.
•Converts a DMM to a thermometer
•For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC)
•Measurement range: -50 to 1000°C (probe
dependent)
Part No. 80TK.
•Small, rugged light easily attaches to any
Fluke test probe
•Bright white LED illuminates contact area
•Frees both hands for work
•120 hours of battery life
•Uses 2 3-volt watch batteries
Part No. L200.
Set of three (one red, one gray, one black)
safety designed insulated Probe Tip Alligator
Clips. Designed for use with STL 120 Shielded
Test Leads and TL75 Test Leads. Accepts
standard 0.08’’ (2 mm)-pin tip sized test
probes. Nickel-plated steel jaw contact material
with standard jaw opening of 5/16’’ (8 mm).
•Maximum Voltage: 600Vrms CAT III per IEC
1010-2-031
•Maximum Current: 10A
Part No. AC120.
•Rugged, high intensity Xenon worklight allows
you to work with both hands
•Attaches to a baseball hat -- includes hat clip
•Electrically and thermally non-conductive
•Withstands 6 ft. drops to concrete
•Waterproof
•Rugged ABS case won’t crack or chip
•Bright xenon lamp in a pre-focused optical
quality reflector
Part No. L205.
FLUKE
FLK/2262
Accessories
DELUXE LED HAT LIGHT
• Attach it to a hard hat, a baseball hat, or even
a panel door for all the light you need •3 super
bright white LEDs •360° Rotating clip •Special
hard-hat attachment included •40-hour battery life •Water resistant •Durable polymer
construction •Rubber shielded Bezel •Also
includes a neck lanyard
Part No. L206.
PROBE LIGHT KIT
Special value combo pairs the new L200 Probe
Light with one of the most popular test leads by
Fluke and a handy carrying case.
•Small, rugged light easily attaches to any
Fluke test probe •Flexible silicone test leads
are heat and cold resistant •Zippered case
has two inside pockets •Probe light frees
both hands for work •120 hours of battery life
•Uses (2) 3V watch batteries
Part No. L211.
SureGrip™ KIT with
PROBE LIGHT AND PROBE
EXTENDER
Includes: •Probe Light
•20 cm Test Probe Extenders
•SureGrip Test Probes
•SureGrip Silicon Test Lead Set
•Foldable soft pouch with six pockets and
hook-and-loop
Part No. L215.
3 PK. TEST LEAD WRAP
•Durable nylon hook and loop fastener •8”
length •Sold in packs of 3
Part No. LEADWRAP.
Hard hat not included.
INDUCTIVE PICK-UP/
EXTERNAL TRIGGER
•Provides RPM readings
Part No. RPM80.
FUSES
Part No. 871173, 5 pk. 630 mA 250V.
Part No. 871202, 5 pk. 3A 600V.
Part No. 892583, 15A 600V.
SLIP-N-GRIP®
SNG/3177
Car Accessories
DISPENSER RACKS
Part No. FB-P9833-89, Floor Dispenser Rack.
Part No. FB-P9933-31, Expandable Wall Rack.
Part No. FB-P9943-54, Wall Dispenser Rack.
Part No. FB-P9943-82, Adhesive Floor Mat Rack.
CHP/1633
FLOOR RACK START-UP KIT
This sturdy rack comes with everything you need to start keeping vehicles clean with genuine Slip-N-Grip® vehicle service
products. Each kit contains: •Sturdy Slip-N-Grip® dispensing
rack with casters •250 Seat
Covers •250 Paper Floor
Mats •500 Plastic Floor
Mats •500 Parts Bags
•250 Steering Wheel Covers •100 Tire/Trash Bags
Part No. FK-P9943-76.
WALL RACK START-UP KIT
Sturdy Slip-N-Grip® dispensing rack includes: •Shelf •500
Plastic Floor Mats •500 Parts Bags •250 Seat Covers •250
Steering Wheel Covers
Part No. FK-P9943-94.
CHAPIN®
Industrial Sprayers
INDUSTRIAL CLEANER/DEGREASER
SPRAYER
•Wide mouth for no-mess filling and cleaning
•Curved poly extension wand with adjustable poly cone nozzle
•Durable poly tank with automatic pressure relief valve
Part No. 22350XP, 2 gallon.
Part No. 22360XP, 3 gallon.
21 L
OCA
TIO
NS:
ALBERTA
EDMONTON - MAIN
16215-118 Avenue, T5V 1C7
Ph: 780-4-GREGGS (447-3447)
Fax: 780-451-2528
GRANDE PRAIRIE
11140 - 97 Avenue, T8V 3J8
Ph: 780-513-4000 Fax: 780-513-6000
HIGH LEVEL
EDMONTON - EAST
10207 - 96 Street, T0H 1Z0
3611 - 76 Avenue, T6B 2S8
Ph: 780-926-2521 Fax: 780-926-3514
Ph: 780-450-2233 Fax: 780-450-2266
RAINBOW LAKE
EDMONTON - SOUTH
2 Rainbow Drive, Box 823, T0H 2Y0
3911 - 92 Street, T6E 6R8
Ph: 780-956-2588 Fax: 780-956-2589
Ph: 780-409-2000 Fax: 780-409-2100
RED DEER
NISKU
5141 - 76A Street Close, T4P 3M2
1405 - 5 Street, T9E 8C7
Ph: 403-341-3100 Fax: 403-341-3210
Ph: 780-979-9988 Fax: 780-979-9989
SPIRIT RIVER
ATHABASCA
5202 Highway 49, Box 579, T0H 3G0
5006 - 52 Street, T9S 1V3
Ph: 780-864-3333 Fax: 780-864-3330
Ph: 780-675-3110 Fax: 780-675-4774
STRATHMORE
CALGARY - MAIN
1020 Westridge Road, T1P 1H8
5755 - 11 Street S.E., T2H 1M7
Ph: 403-934-3710 Fax: 403-934-5453
Ph: 403-253-6463 Fax: 403-253-5926
BRITISH COLUMBIA
CALGARY - FOOTHILLS
6130 - 51 Street S.E., T2C 4M9
FORT ST. JOHN
Ph: 403-203-1928 Fax: 403-236-1912 9404 - 111 Street, V1J 7J5
Ph: 250-785-8000 Fax: 250-785-8022
CLAIRMONT
9802 - 84 Avenue, T0H 0W0
LANGLEY
Ph: 780-567-2238 Fax: 780-567-2239 19632 - 96 Avenue, V1M 3B9
Ph: 604-888-9588 Fax: 604-888-4688
DRAYTON VALLEY
6105 - 50 Avenue, Box 5055, T7A 1R3 NANAIMO
Ph: 780-621-0056 Fax: 780-621-0057 1935 Boxwood Road, V9S 5X9
Ph: 250-754-1935 Fax: 250-754-1165
FAIRVIEW
9402 - 113 Street, Box 2020, T0H 1L0
SASKATCHEWAN
Ph: 780-835-5115 Fax: 780-835-3535
SASKATOON
FORT McMURRAY
3066 Faithfull Avenue, S7K 8H2
325 MacAlpine Crescent, T9H 4Y4
Ph: (306) 343-6655 Fax: (306) 343-6656
Ph: 780-715-4000 Fax: 780-743-8833
Items may not be exactly as illustrated. Quantities on some items may be limited.
Errors are subject to correction. ©2015 Gregg Distributors Ltd. All rights reserved.

NEW PRODUCT 1 - Gregg Distributors

Transcription

Similar documents

kutrimmer 1043 tabletop trimmer

EARN QUADRUPLE LOYALTY POINTS BAZ KNIVES

Paul Strisik NA - American Fine Art Magazine

Untitled - Bron

Notice W Pocket GB mollette

S5425010001 Bahco Chisels 434 10 MM Classification Brand

Explore - LM Wind Power

Quick Blade - Draco Equipment

MK-660 Features

Junkers Ju 86B Stuka