KJM Series - Mil-DTL 38999 Series I

Transcription

KJM Series - Mil-DTL 38999 Series I
KJM Series - Mil-DTL 38999 Series I
With a proven history of engineering and manufacturing excellence spanning 100 years,
ITT Cannon continues to deliver a broad range of innovative product solutions to enable
our customers to meet their most demanding design requirements.
ITT Cannon’s Next Gen 38999 Series I, KJM meets the
stringent MIL-DTL-38999 specifications and is ideally suited
for critical harsh environment military and aerospace
applications. This series builds on ITT Cannon’s KJL series
with improved manufacturing and process efficiencies to
deliver a cost competitive solution.
• Meets the stringent Mil-DTL 38999 specification
requirements
•Redesigned to make significant improvements in the
manufacturing of this product
•Provides high quality and reliability at market competitive
prices
•Broad distribution network
•Global manufacturing locations optimizing engineering
resources
The CANNON Difference:
•Laser marking of cavity identification
•Elastomers technologies
•Redesigned sealing membranes
•State-of-the-art assembly facility
Key Features
•Qualified to Mil-DTL 38999
•High contact density pin count
•Moisture resistant
•Quick connect and disconnect coupling
•500 hour corrosion resistance available
Applications
Commercial & Military Aerospace
Military Ground Vehicles
Military Communications Systems
Satellites
Why ITT
ITT is a focused multi-industrial company that designs and manufactures highly engineered critical components and
customized technology solutions.
ITT Interconnect Solutions’ Cannon brand is a leading global manufacturer of connector products serving international
customers in the aerospace and defense, medical, energy, transportation and industrial end markets. ITT’s Interconnect
Solutions business manufactures and supplies a variety of connectors and interconnects that make it possible to transfer
data, signal and power in an increasingly connected world, including its VEAM and BIW Connector Systems brands.
Cannon KJM - MIL-DTL-38999 Series I Connectors
MS27467
Military
Nomenclature
T
17
B
35
S
Ms Number Shell Style
Class
Shell Size
Hardware Finish
Contact Arrangement
Contact Style
Polarizing Position
Ms Number Shell Style
MS27466 - Wall Mounting Receptacle
MS27468 - Jam Nut Receptacle
MS27467 - Grounded Plug
MS27656 - Wall Mounting Receptacle
(back panel mounting)
MS27505 - Box Mounting Receptacle (back panel)
(Class E)
Class
E - Inactive for new design. Superseded by Class T.
G - Environmental resistant Space Grade
P - Environment - resistant with straight potting
cup accessories
T - Environment - resistant with accessory threads
and teeth, except MS27505 (without rear
accessory) (Class T not applicable to MS27505)
Shell Size
9, 11, 13, 15, 17, 19, 21, 23 and 25
Hardware Finish Standard
A - Bright cadmium over electroless nickel plate,
- 85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
F - Electroless nickel, -85ºF to +392ºF (-65ºC to
+200ºC)
Polarizing Position
A,B,C and D. (No letters required for normal).
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”
Contact Arrangement
Refer to Mil Standard 1560
KJM
Cannon
Nomenclature
Contact Style
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
*Used only when other than power contacts are
to be installed (i.e. shielded, thermocouple, etc.)
6
T
17
B
35
S
N
Series Prefix
Shell Style
Class
Shell Size
Hardware Finish
Contact Arrangement
Contact Style
Polarizing Position
Modification Code
Series Prefix
KJL - Series I - Scoop proof, with pink rubber seals
KJM - Series I - Scoop proof with white rubber seals
Shell Style
0 - Wall mounting receptacle
3 - Wall mounting receptacle (back panel mounting)
4 - Thru bulkhead receptacle
5 - Box mounting receptacle (back panel mounting)
6 - Straight plug, grounded
7 - Jam nut receptacle
Class
E - Inactive for new design. Superseded by Class T.
G - Environmental resistant - Space Grade
F - Environment - resistant with strain relief accessory
P - Environment - resistant with straight potting
cup accessory
T - Environment - resistant (without rear accessory)
(Class T not applicable to KJL5)
Shell Size
9, 11, 13, 15, 17, 19, 21, 23 and 25
Hardware Finish Standard
A - Bright cadmium over electroless nickel plate,
- 85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to + 175ºC)
N - Electroless nickel, -85ºF to +392ºF (-65ºC to
+200ºC)
T - Teflon Nickel -85 degree F to +347 degree F
(-65 degree C to +175 degree C)
Z - Zinc Nickel, Black -85 degree F to +347
degree F (-65 degree C to +175 degree C)
Contact Style
P - Pin
S - Socket
PS - Pin-Socket (Shell style 4 only)
Polarizing Position
N (normal), A, B, C, D. Refer to Mil Standard 1560.
Modification Code
L - Less contacts, not stamped on connector
16 - Outgassed NASA space graded connector
27 - Outgassed, standard connector
A296 Black Zinc Cobalt, RoHS Compliant
Contact Arrangement
Refer to Mil Standard 1560
Connect with your ITT Interconnect Solutions representative today or visit us at www.ittcannon.com
United States
Phone: +1.800.854.3208
Italy
Phone: +39.02938721
Germany
Phone: +49.7151.699.0
The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“are registered trademarks of ITT Corporation.
Specification and other data are based on information available at the time of printing, and are subject to change without notice.
Hong Kong
Phone : +852 27322720
© 2015 ITT Corporation, Inc.
ITT Cannon 38999KJM - 1501