Joint Sealant - DCP International

Transcription

Joint Sealant - DCP International
Joint filler & accessories
Cellrod
Aluseal AC100
Advantages of Cellrod are:
- Provides firm backing for sealant tooling
- Rot proof and non-absorbent
- Readily compressible
Advantages of Aluseal AC100:
- Able to withstand joint movement
- Internal and external application
- Easy to install
Fiberboard
Flexprime PS100
Closed cell polyethylene backing rod to prevent
three way adhesion and support the sealant.
Compressible sheet manufactured from bitumen
impregnated wood fibers used as a joint filler
Advantages of Fiberboard:
- Excellent recovery after compression
- Will not extrude under compression
- Easy to handle and cut
Aluminum covers placed over the joint to protect
and conceal the sealant.
Flexprime PS100 is a two part epoxy based
universal primer which can be used for
polysulphide sealants within the Flexseal range.
Advantages of Flexprime PS100:
- Used for porous and non-porous substrates
- Increases the bond strength
- Application while still tacky
Flextape BB100 is used in conjunction with
Fiberboard
Sealing joints
Flexseal sealant
Flextape BB100
Flexseal sealant
Joint Sealants Product
Selector
Backing rod
Fiberboard
Substrate
Substrate
www.dcp-int.com
Note: We endeavour to ensure that any information, advice or recommendation we may give in product literature is accurate and correct.
However, because we have no control over where and how products are applied, we cannot accept any liability arising from the use of the products.
Flexseal range is formulated to offer superior products and high
performance sealants against aggressive conditions while remaining
environmentally friendly and exceeding the international specifications
and standards
Sealants Product Selector
Flexseal C100
Elastomeric acrylic
cement mortar sealant
Applications:
Sealing cracks in concrete
Between precast elements
Water retaining structures
Joint movement capability
Flexseal GA700/GA777
General purpose acrylic
sealant
Applications:
Windows & door frames
Galvanized metal sheets
Around ducts
Flexseal AS111/AS122
Universal acetoxy cure
silicone sealant
Applications:
Wet rooms
Ceramic tile Joints
Around uPVC frames
Flexseal NS901
High quality neutral
cure silicone sealant
Applications:
Floor & wall joints
Precast panels
Submerged conditions
Flexseal PU425/PU440
Elastomeric polyurethane
sealant
Applications:
High pedestrian traffic
Marble surfaces
Expansion joints
Flexseal PS660
High performance gun
grade polysulphide sealant
Applications:
With potable water
Joints in car garages
Parapet wall joints
5%
10%
25%
25%
25%
25%
Grey
Wide range
White, black, translucent
Wide range
Wide range
Grey
ASTM C834
ASTM C920
BS EN ISO 11600
ASTM C920
BS EN ISO 11600
ASTM C920
BS EN ISO 11600
ASTM C920
BS EN ISO 11600
Concrete/masonry
Aluminium
Substrate
Glass
Natural stone/marble
Wood
Metal
sĞƌƟĐĂů
Horizontal
Interior
Exterior
Exposure to water
ƉƉůŝĐĂƟŽŶƐ
^ƵďŵĞƌŐĞĚĐŽŶĚŝƟŽŶƐ
WŽƚĂďůĞǁĂƚĞƌĐŽŶĚŝƟŽŶƐ
^ĂŶŝƚĂƌLJĐŽŶĚŝƟŽŶƐ
WĞĚĞƐƚƌŝĂŶΘǀĞŚŝĐƵůĂƌƚƌĂĸĐ
Expansion joints
Chemical resistance
Long service life
Doesn’t need priming
One-part
ŚĂƌĂĐƚĞƌŝƐƟĐƐ UV resistant
Paintable
Cleaning uncured sealant with water
Colour
Standards
ASTM
ISO
BS
BS 6920
International standards for sealants
Do not use
Recommended
Highly recommended
ASTM C834: The specifications of the American Society for Testing and Materials for latex sealant
ASTM C920: The specifications of the American Society for Testing and Materials for elastomeric joint sealants
BS EN ISO11600: The specifications of British, European and ISO requirements of sealants
BS 6920: The British Standard for use in contact with water intended for human consumption