video source ident/time code reader 1302si - AV-iQ

Transcription

video source ident/time code reader 1302si - AV-iQ
NTSC/D2 PROM-Slide®
2602ES
• Four-field storage
• Ideal for Station Logo
• Independent phasing
The Leitch 2602ES PROM-Slide is a compact, low cost, high quality,
module for displaying a permanently stored full color frame (4-fields)
NTSC still. It is ideally suited for applications where stills such as logos,
standby messages, or complex test signals are required on a regular
basis.
The 2602ES-S PROM-Slide is ideal for displaying a full color frame serial
digital composite still.
SPECIFICATIONS
The module is programmed to output a still taken from video tape,
graphics file, or a Leitch STILL FILE removable cartridge. The
PROM-Slide can be reprogrammed as requirements change.
Specifications and designs are subject to change without notice
Outputs (2602ES)
Number of outputs
Impedance
Return loss
H phasing rel. to sync.
Sampling
Freq. response
Differential Gain
Differential Phase
Slide programming
The PROM-Slide plugs into any of the 9 available slots of the
SPG-2602 Sync Pulse Generator or into the 3 available slots of the
SPG-1302N Sync Pulse Generator.
ORDERING INFORMATION
2
75 Ohm
42 dB to 4 MHz
4 µs advance, 12 µs delay
14.3 MHz (4fsc) 8-bit
± 0.15 dB to 4.5 MHz
< 2%
< 1°
customer specified
2602ES
PROM Slide module (Requires the 1302GL module.
Includes rear connector assembly).
Serial Composite PROM Slide module (Requires the
1302GL module. Includes rear connector assembly).
1RU Mounting Frame
2RU Mounting Frame
Stand-alone MIX BOX
NTSC/D2 PROM Slide module with Oscillator
for MIX BOX
2602ES-S
FR-1302
FR-2602
FR-7000MB
2602ES-XO
Outputs (2602ES-S)
Number of outputs
Slide programming
Digital generation
H phasing rel. to sync.
XO modules do not have genlock
2 per SMPTE 259M
customer specified
10-bit
4 µs advance, 12 µs delay
Related Products
LGI-1302/2602N Logo Generator/Inserter
Contact Leitch for specifications of complex test signals.
VIDEO SOURCE IDENT/TIME CODE READER
• Up to eight pre-programmed IDs, each with up to ten
lines of 24 characters
• Time code text insertion of both date and time (SMPTE /
EBU)
•
•
•
•
Keys into program video
Vertical interval character insertion
16 character sizes
•
•
•
•
•
1302SI
Count down timer with PIP tones
RS-232/RS-485 interface
ASCII terminal driver mode
PC editor interface included
Program custom message with built in message
editor (terminal required)
• 525/625 line operation
• Available in MIX BOX Stand-alone Series
Selectable black matte background
2
SERIAL PORT/REMOTE
1
OUTPUT
1302SI-BM1
The versatile 1302SI Source Ident module adds new features to the
LEITCH 1302 and 2602 Series units.This module allows
pre-programming of custom messages into program video as well as the
display of time and date from SMPTE/EBU Time Code.
Pre-programmed IDs
Up to eight IDs, each with up to 10 lines of 24 characters, can be
pre-programmed in a single 1302SI module.The character set includes
128 different alpha-numeric and symbolic characters. IDs are selected by
a rotary switch. A second rotary switch can be used to set an extra
INPUT
BEEP
-
+
GND
T/C
-
+
alpha-numeric identifier within an ID (eg. Camera A, Remote 2). Each
programmed ID can also be remotely selected using contact closures
on the 25-way D connector.
Count-Down Timer
The 1302SI provides a count-down timer with PIP tones (440 Hz), and
up to two additional pre-programmed IDs with the count-down timer.
The count start/stop is easily programmable and alternate tone
frequencies are also available. The count-down IDs appear only for
the duration of the actual count-down.
Product Catalog
Display of Data
Data is displayed as white characters with a black cutout on program
background or on a black matte. Characters can be expanded up to
4 times vertically and/or horizontally. Half-height characters are used
for vertical interval insert.
Clock System Driver and the UDT-5700 Series of Up/Down Timers for
on-screen date, time or count down/count up.
Interfaces
The 1302SI provides an RS-232/ RS-485 interface for on-screen text
programming.Custom IDs or messages are programmed with the
built-in message editor via the RS-232/RS-485 port. To simplify
programming IDs, a PC editor interface program is included.
Up to 4 modules can be housed in the FR-1302 1RU Mounting Frame,
while 9 modules can be housed in the FR-2602 2RU Mounting Frame.
External key disable and countdown start triggers are provided for remote
control.
Time Code
For time code reading applications, the 1302SI includes a play
speed time code reader with one ID. The programmed ID remains
displayed only when valid time code is received. This time code
reading mode provides a simple interface to the CSD-5300 Master
SPECIFICATIONS
Specifications and designs are subject to change without notice
Return loss
Output DC
Output level
Standard Configuration
525/625 Operation
Jumper selectable
Time Code Input
Performance
Frequency response
S/N ratio
Chroma/Lum. delay error
Video propagation delay
Differential gain
Differential phase
Character shaping
Character level (adj.)
Character cutout (adj.)
Format
Impedance
Level
< ± 0.15 dB to 5 MHz typ.
65 dB (rel. to 0.714 V Video)
± 5 ns
28 ns typ.
< 0.5%.
< 0.5
approximately 150 ns sin2
90 to 105 IRE (0.65 to 0.75 V)
0 to 7.5 IRE (0 to 54 mV)
Output Ch. A
Level
Frequency
Power
2.5 Watts per module
Neg. going edge triggered, min. 2 frames (66 ms) pulse
TTL low logic
ORDERING INFORMATION
1
1 Vp-p video, ±3 dB
75 Ohm terminating
>40 dB to 5 MHz
Mounting Frames
FR-1302
1302SI
FR-2602
Outputs
Number of outputs
Impedance
66 Ohm balanced
0 to 10 dBm, adjustable
approximately 440 Hz
Electrical
Program Input
Number of inputs
Level
Impedance
Return loss
EBU/SMPTE (standard or drop frame)
High-Z, balanced
4 Vp-p ±8 dB
Audio Output (PIP Tone)
Remote Control
Count Down Start
Key Disable
>34 dB to 5 MHz
back porch at ground, 50 mV
140 ±5 IRE (1V, 36 mV)
FR-7000MB
2
75 Ohm
Video Source Ident/Time Code Reader module
(includes PC Software)
1RU Mounting Frame, holds four modules
(includes 1302PS Power Supply)
2RU Mounting Frame, holds nine modules
(includes 1302PS Power Supply)
Stand-alone MIX BOX
TIME CODE CONVERTER
TCC-1302
• Generates continuous color-framed, video-locked time
code in either EBU or SMPTE-Drop Frame Time Code
formats
• Genlocks and references to input video: NTSC (SMPTE)
or PAL (EBU)
• Automatic soft jam-sync to real time input without
interruption of output time code
• Free-run when no input real time and/or video is
available (manual set and reset)
• Fully programmable offsets
• Direct compatibility with Leitch CSD-5300 Master Clock
System Driver and Auxiliary Offset user bit option
• Ability to convert non-drop frame SMPTE Time Code
to video-locked Drop Frame SMPTE Time Code
• Serial RS-232 output port provides ASCII
representation of time code value in user-selected
formats
• Ability to pass or delete user bit data
• Remote control operation via RS-232 serial
command port and full hardwired remote control of
front panel switches
• Keyed video insertion of time code when used with
1302SI Video Source Ident in same or other frame
• 24- or 12-hour output format selectable
1302CC-BM
SERIAL PORT/REMOTE
VIDEO
TIMECODE
-
Product Catalog
+
GND
-
+