Aluminium Extrusion

Transcription

Aluminium Extrusion
DUMPING COMMODITY REGISTER
7604.10.00(1)
R. 24
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Measures
Anti-dumping measures in the form of interim dumping duty (IDD) and interim countervailing duty (ICD) have been
imposed on aluminium extrusions exported from the Peoples Republic of China (China).
Description of the goods
The aluminum extrusions covered by measures:
 are produced by an extrusion process;
 are of alloys having metallic elements falling within the alloy designations published by The Aluminium
Association commencing with 1, 2, 3, 5, 6 or 7 (or proprietary or other certifying body equivalents);
 have finishes being:
 as extruded (mill);
 mechanical;
 anodized; or
 painted or otherwise coated, whether or not worked;
 have a wall thickness or diameter greater than 0.5 mm;
 have a maximum weight per metre of 27 kilograms; and
 have a profile or cross-section fitting within a circle having a diameter of 421 mm.
Goods subject to measures should be classified using the tariff sub-headings and associated statistical codes contained
in Table 1.
Table 1 - The tariff subheadings and statistical codes subject to measures
Tariff subheading
7604.10.00
7604.21.00
7604.29.00
7608.10.00
7608.20.00
7610.10.00
7610.90.00
Statistical codes
06
07, 08
09, 10
09
10
12
13
Exempt exporters
There is one exporter exempt from both IDD and ICD: Tai Ao Aluminium Tai Shan Co Ltd (Tai Ao). Exemption type
‘SUPPLIER’ applies to aluminium extrusions manufactured by Tai Ao and either exported directly by Tai Ao or
supplied through Phoenix Endeavour Ltd.
There is one exporter exempt from IDD only: Guangdong Zhongya Aluminium Company Limited (Guangdong
Zhongya formerly known as Zhaoqing New Zhongya Aluminium Co Ltd). ICD will apply to aluminium extrusions
manufactured by Guangdong Zhongya and either exported directly by Guangdong Zhongya or supplied through
Zhongya Shaped Aluminium HK Holding Ltd.
All other exporters are subject to IDD and ICD measures as advised in Table 3 below.
Dates of Effect
IDD and ICD were initially imposed on 29 October 2010 and were last revised on:





27 August 2011 – following reinvestigation;
21 November 2012 – following an accelerated review for Wuxi Xisha Photoelectric Aluminium Products Co Ltd
11 October 2013 – following a Federal Court decision
18 December 2013 – following an accelerated review for Guangdong Jinxiecheng Aluminium Manufacturing Co
Ltd (Guangdong Jinxiecheng) and;
28 November 2014 – following an accelerated review for Zhaoqing Xinlianchang Metal Corporation Ltd
(Zhaoqing Xinlianchang).
Reflecting the Federal Court Orders, the changes to the anti-dumping measures related only to aluminium extrusions
exported by Tai Shan City Kam Kiu Aluminium Extrusion Company and Panasia Aluminium China. No changes were
made to the anti-dumping measures applicable to other Chinese exporters of aluminium extrusions. Australian
Dumping Notice (ADN) 2013/80 provided further information to assist affected importers and Customs brokers.
Change 03/02/2015
DUMPING COMMODITY REGISTER
7604.10.00(2)
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Dates of Effect (continued)
The accelerated review applied resulted in the imposition of exporter specific anti-dumping measures applying to
aluminium extrusions exported by Guangdong Jinxiecheng. ADN 2013/74 provides further information to assist
affected importers and Customs brokers.
The accelerated review for exports of aluminium extrusions by Zhaoqing Xinlianchang resulted in the
imposition of exporter specific anti-dumping and countervailing measures. ADN 2014/131 provides further
information to assist affected importers and Customs Brokers.
Identifying the goods subject to measures
Table 2 provides guidance to importers and brokers to assist in the categorisation of aluminium extrusions into the
types covered by interim duties (GUC), and those not covered (Non GUC). In most cases, extrusions classified to
headings 7604 or 7608 would be subject to IDD and/or ICD. Importers should use the table to categorise their goods
and decide whether dumping and countervailing duties apply.
Table 2: - The goods covered by measures
1
Aluminium
extrusions
< Goods Under Consideration (GUC) >
2
3
Aluminium
Aluminium
extrusions
extrusions that are
with minor
parts intended for
working
use in
intermediate or
finished products
Mill finish,
painted, powder
coated, anodised,
or otherwise
coated aluminium
extrusions
Precision
cut,
machined,
punched or
drilled
aluminium
extrusions
Aluminium
extrusions
designed for use
in a door or
window
4
Aluminium
extrusions
that are
themselves
finished
products
5
Unassembled products
containing aluminium
extrusions
< Non GUC >
6
Intermediate or
partly
assembled
products
containing
aluminium
extrusions
< Examples >
Carpet liner,
Kits that, at time of import,
fence posts,
comprise all necessary
heat sinks
parts to assemble finished
goods. For example,
shower frame kits, window
frame kits, unassembled
unitised curtain walls
Unglazed
window or door
frames
7
Fully assembled
finished
products
containing
aluminium
extrusions
Windows, doors
Direction for collection of IDD and ICD
Goods subject to the measures must be entered using the relevant dumping specification number (DSN) for the
nominated exporter/supplier as shown in Table 3 and the export price terms shown in Tables 6 and 7.
PLEASE NOTE: The All Other Exporter rate of ICD and/or IDD will apply unless an importer/broker can
provide proof that the goods are being supplied either directly by a named exporter or through a linked
supplier(s).
The IDD for all exporter/suppliers except Guangdong Jinxiecheng and Zhaoqing Xinlianchang is in the form of a fixed
+ variable measure. The IDD liability is calculated as follows:

the dumping export price (DXP) or ascertained export price (AEP), whichever is the greatest, multiplied by
the IDD ad valorem duty rate; Plus

the amount, if any, by which the DXP is lower than the AEP.
For Guangdong Jinxiecheng and Zhaoqing Xinlianchang, the IDD is in the form of a floor price. The IDD liability is
calculated as the difference between the DXP and both the normal value and the non-injurious price (NIP) and is
payable only where the DXP is less than both the normal value and NIP.
The ICD for all exporter/suppliers is in the form of a fixed measure. The ICD liability is calculated by multiplying the
DXP by the ICD ad valorem duty rate.
DUMPING COMMODITY REGISTER
7604.10.00(3)
R. 29
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Release of details of measures
Unless otherwise advised, the rate of IDD and the AEP for each DSN in Tables 6 and 7 are considered
Confidential and will not be published.
Bona fide importers of the goods may be provided with the confidential information relevant to a nominated
exporter/supplier or country in the case of country wide measures.
The onus is on the importer to prove their bona fides by providing evidence of the following to
[email protected]:

a previous trading history with a nominated exporter/supplier of the goods from a country subject to
dumping/countervailing measures. Evidence of a trading history would take the form of at least
commercial invoices, packing list and bills of lading from previous shipments. Additional
documentation as proof of bona fides may also be requested.

in the absence of a trading history, an offer or a quotation from an exporter/supplier of goods subject to
dumping/countervailing measures. The offer or quotation must be on the exporter/supplier’s company
letterhead – emails will not generally be accepted.
or
Importers should note that only as much of the confidential information as is necessary to enter the goods will be
provided. ACDN 2012/61 provides further information to assist importers and Customs brokers.
The Australian Customs and Border Protection Service (ACBPS) will conduct monitoring of imports subject to
anti-dumping measures consistent with its published policy.
Duty Assessment
Where anti-dumping measures have been imposed on goods exported to Australia, the importer is liable to pay
IDD and/or ICD at the time of importation. The rates of IDD and/or ICD are based on prices verified during the
original dumping investigation or subsequent review of the duty and are in place for a period of five years unless
revoked earlier.
To ensure that the amount of IDD and/or ICD collected by ACBPS does not exceed the actual dumping and/or
subsidy margin for each consignment over the five-year period, provision exists for assessment of the final duty
liability under the Customs Tariff (Anti-Dumping) Act 1975. This system allows for any excess interim duty to be
refunded where it is found that prices have changed since the original investigation or subsequent review.
There are a series of time frames fixed by legislation that govern the duty assessment system. An application for
duty assessment must cover all shipments entered for home consumption by an importer in a specific six-month
importation period. The six-month period is determined by the date of publication of the initial notice imposing
the dumping duty. Where securities have been taken pending the Minister's decision, the importation period may
be less than six months. An application for a duty assessment cannot be lodged prior to the end of the particular
importation period to which it relates, but must be lodged with the Anti-Dumping Commission within six
months from the end of that importation period. Table 8 provides detail of the relevant importation periods and
application periods for aluminium extrusions exported from China.
Additional information is available at http://www.adcommission.gov.au/system/csi/WhatisDA.asp
Change 03/02/2015
DUMPING COMMODITY REGISTER
7604.10.00(4)
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Table 3 – Exporters and DSN
Exporter
CCID
Finish
Measure
DSN
CCE6997349W
CCF9494397L
CCG3779374P
CCG6436934M
CCX4494337G
CCY7374367R
All types
Exempt IDD & ICD
CEL9644346C
CCW6474494R
CCE3446434L
Mill
Anodised
Powder coated
Other
ICD only
ICD only
ICD only
ICD only
31
32
33
34
Guangdong Jinxiecheng Al. Manufacturing Co., Ltd
Supplied directly or through
Foshan Nanhai Newtime Trading Co., Ltd
CEL4673763R
CEL4396669W
All types
IDD & ICD
77
Tai Shan City Kam Kiu Aluminium Extrusion Co Ltd
Supplied directly or through
Kam Kiu Aluminium Products Sdn Bhd
CCE7444964M
All types
IDD & ICD
75
Panasia Aluminium China
Supplied directly or through
Panasia Aluminium (Macao Commercial Offshore) Ltd
Or
Opal Macao Commercial Offshore Limited
CCP7733374Y
CCT9974764M
CEA4736366H
CCX3667779Y
All types
IDD & ICD
76
Wuxi Xisha Photoelectric Aluminium Products Co Ltd
CCT9979499R
Mill
Anodised
Powder coated
Other
IDD & ICD
IDD & ICD
IDD & ICD
IDD & ICD
55
56
57
58
Zhaoqing Xinlianchang Metal Corporation Ltd
Supplied directly or through
Fo Shan Heng He Import and Export Trading Co. Ltd
CEW3663676A
CER9437694Y
All types
IDD & ICD
88
Residual exporters (Group 1)
See Table 4 for list of exporters and associated suppliers
Mill
Anodised
Powder coated
Other
IDD & ICD
IDD & ICD
IDD & ICD
IDD & ICD
42
43
44
45
Residual exporters/suppliers (Group 2)
See Table 5 for list of exporters and associated suppliers
Mill
Anodised
Powder coated
Other
IDD & ICD
IDD & ICD
IDD & ICD
IDD & ICD
46
47
48
49
All other exporters
Mill
Anodised
Powder coated
Other
IDD & ICD
IDD & ICD
IDD & ICD
IDD & ICD
50
51
52
53
Exempt exporter
Tai Ao Aluminium Tai Shan Co Ltd
Supplied directly or through
Phoenix Endeavour Ltd
Exporters covered by interim countervailing and/or dumping duties
Guangdong Zhongya Aluminium Company Limited
(Formerly known as Zhaoqing New Zhongya Aluminium Co Ltd)
Supplied directly or through
Zhongya Shaped Aluminium HK Holding Ltd
DUMPING COMMODITY REGISTER
7604.10.00(5)
R. 4
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Table 4 – Residual Exporters (Group 1)
Exporter
Alnan Aluminium Co., Ltd
Beijing General Research Institute For Non Ferrous Metals
Cosco (J.M) Aluminium Development Co., Ltd
Foshan Guang Cheng Aluminium Co. Ltd.
Foshan Sanshui Fenglu Aluminium Company Limited
Fujian Minfa Aluminium Co Ltd
Golden Power Co., Ltd.
Guangdong Huachang Aluminium Factory Co., Ltd
Guangdong Jianmei Aluminium Profile Factory Co., Ltd
Guangdong Weiye Aluminium Factory Co., Ltd.
Guangdong Xingfa Aluminium Company Limited
Guang Ya Aluminium Industries Co., Ltd
Hydro Aluminium (Suzhou) Co., Ltd
Jiangyin East-China Aluminium Technology Co., Ltd
Kingle Aluminium Technology Stock Co., Ltd
New Hocha Aluminium Industry Co., Ltd
Penglai Sanling Locks Co., Ltd
Pmh Aluminium Extrusion Co., Ltd
Press Metal International Ltd
Shanghai Unison Aluminum Products Co., Ltd
Silver 100 Aluminium Innovation (Guangdong) Limited
Taishan Golden Gain Aluminium Products Limited
Yangjiang Kitsen Construction Hardware Co., Ltd
Supplied by
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
CCID
CCK7697673M
CCC6793964J
CCJ7747734W
CCM9936747Y
CCH4996939T
CCJ3676734G
CCT6336447T
CCJ6397766Y
CCE3676336W
CCK6394664G
CCL4663433G
CCT3446763W
CCK6499693N
CCR3493934E
CCN9463949N
CCH6364363W
CCJ6493494N
CCT3343446N
CCK6444394Y
CCN7639666A
CCP6336366K
CCT6669669E
CCL9367664H
Table 5 – Residual Exporters/Suppliers (Group 2)
Exporter
Foshan JMA Aluminium Co., Ltd
Guangdong Jianmei Aluminium Profile Factory Co., Ltd
Shandong Nashan Aluminium Co Ltd
Shandong Nashan Aluminium Co Ltd
Foshan Nanhai Yongfeng Aluminium Co., Ltd
Foshan Nanhai Yongfeng Aluminium Co., Ltd
Fujian Longyan Lianfa Aluminium Co. Ltd
Fujian Yongchun Chuangheng (Shaungheng) Aluminium
Fuzhou TCI Corporation
Taishan Golden Gain Aluminium Products Limited
Taishan Golden Gain Aluminium Products Limited
Fujian Minfa Aluminium Co Ltd
Guangdong Xingfa Aluminium Co Ltd
Supplied by
JMA HK Company Limited
JMA HK Company Limited
Longkou Donghaitrade Co., Ltd
Yantai Jintai International Trade Co., Ltd
Nanhai Textiles Import & Export Company of
Guangdong
Guangdong Nanhai Foodstuffs Import and Export Co
Xiamen Hongchi Trade Co. Ltd
Xiamen Hongchi Trade Co. Ltd
Taiwan Viva Corporation
Innovative Aluminium (Hong Kong) Ltd
Centor Architectural Nanjing Limited
Shanghai Asia Foreground International Trade Co Ltd
Yangzhou Camets Technique Co Ltd
CCID
CCG6634366G
CCG6634366G
CCG6773466A
CCY9793677N
CCC9746446H
CCE9743373N
CCH4999466L
CCH4999466L
CCH9649773F
CCY3643469W
CEG3697439P
CCM3366499G
CCT7434364H
CCT3644376A
Change 03/02/2015
DUMPING COMMODITY REGISTER
7604.10.00(6)
ALUMINIUM EXTRUSIONS
EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA
Table 6 – Fixed and Variable (Interim Duty Rates, AEP)
DSN
IDD/DSA
ad valorem
rate (%)
N/A
N/A
N/A
N/A
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Effective rate
of duty
AEP
AUD/kilo
Export
terms
31
32
33
34
42
43
44
45
46
47
48
49
50
51
52
53
55
56
57
58
75
ICD/CSA
ad valorem
rate (%)
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Remarks
7.6%
7.6%
5.5%
7.6%
12.4%
9.6%
6.4%
0.0%
12.4%
9.6%
6.4%
0.0%
22.4%
30.1%
24.1%
33.3%
10.6%
33.7%
29.3%
5.1%
2.1%
N/A
N/A
N/A
N/A
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
Confidential
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
FOB, cash
76
Confidential
Confidential
10.1%
Confidential
FOB, cash
Goods exported and entered
for home consumption after
29 October 2010
Goods exported and entered
for home consumption after
21 November 2012
Goods exported and entered
for home consumption after
11 October 2013
Table 7 – Floor Price (Normal Value and NIP)
DSN
77
88
ICD
Ad valorem
Rate (%)
Confidential
Confidential
Export
terms
Normal
value
FOB, cash
FOB, cash
Confidential
Confidential
Normal
Value
Currency
AUD/kilo
AUD/kilo
NIP
NIP
Currency
Confidential
Confidential
AUD/kilo
AUD/kilo
Table 8 – Duty Assessment Importation & Application Periods
Importation Period
28 October 2012 – 27 April 2013
28 April 2013 – 27 October 2013
28 October 2013 to 27 April 2014
28 April 2014 – 27 October 2014
28 October 2014 to 27 April 2015
28 April 2015 – 27 October 2015
Application Period
28 April 2013 to 27 October 2013
28 October 2013 to 27 April 2014
28 April 2014 – 27 October 2014
28 October 2014 to 27 April 2015
28 April 2015 – 27 October 2015
28 October 2015 to 27 April 2016