Belgium Stone Range

Belgium
Stone Range
Glazed porcelain floor and wall tiles in six colours
and three finishes. Exclusive to National Tiles.
Floor tiles in this image: Belgium Stone Artico
Lapparto 600x600mm
Belgium Stone Range
Sophisticated and affordable are just two ways to describe this beautiful collection. Comprising of six
colours, three finishes and three sizes, Belgium Stone is perfect for indoor and outdoor spaces. Warm and
cool tones capture the essence of contemporary style.
This durable glazed porcelain range makes it the perfect offering in any home, with its understated beauty,
Belgium Stone is accompanied by a ten year warranty and is exclusive to National Tiles.
Tiles in this image: Belgium Stone Ice Natural
300x600mm and 600x600mm
Tiles in this image: Belgium Stone Bruno
Lapparto 600x600mm
Floor tile in this image:
Cenere Natural 300x600mm
Tiles in the middle image: Belgium Stone Lavagna
Natural 300x600mm
*Special order: minimum quantities and lead times apply.
Tiles in the bottom image: Carbone
Natural 300x600mm
Belgium Stone Mosaic Dark
Mix Lapparto/ Natural
96x85mm on a 328x306mm sheet
Belgium Stone Mosaic Light
Mix Lapparto/ Natural
96x85mm on a 328x306mm sheet
Tiles in this image: Belgium Stone Carbone
Natural 300x600mm
Available colours, sizes and finishes (excluding mosaics):
Colour
Finish / Size
Lapparto
ARTICO
Natural
External
Available sizes:
Available sizes:
Available sizes:
CENERE
300x300mm*
300x300mm
300x300mm*
LAVAGNA
300x600mm
300x600mm
300x600mm
600x600mm
600x600mm
600x600mm
BRUNO
CARBONE
ICE
Ice
Artico
Bruno
Basic Specifications
(excluding mosaics):
Glazed porcelain
Available finishes: natural, lapparto & external
Available sizes: 300x300mm*, 300x600mm &
600x600mm (please note: sizes are nominal)
Suitable for both floor & wall applications
Cenere
Lavagna
Carbone
Rectified edge
10 year warranty*
Exclusive to National Tiles
Slip resistance:
wet pendulum test external - P5 / natural - W**
oil-wet ramp test external - R11 / natural - R9
Technical Characteristics
Range: Belgium Stone Product Group Bla GL
Technical Features
Dimensional
Characteristics
Structural
Characteristics
Surface
Characteristics
Thermal and
Hygrometric
Characteristics
Length and width
Thickness
Rectangularity b
Straightness of sides b (facial
sides)
Surface Flatness
Water Absorption
Per cent mass fraction g
Breaking Strength, in Newtons
a) Thickness > 7,5mm
b) Thickness < 7,5mm
Modulus of rupture, in
Newtons per square millimetre
Not applicable to tiles with breaking
strength > 3 000 N
a) Resistance to deep abrasion of
unglazed tiles: removed volume, in
cubic millimetres
b) Resistance to abrasion of glazed
tiles intended for us on floors d
Coefficient of Linear Thermal
expansion e. From ambient
temperature to 100 °C
Thermal shock resistance e
Frost resistance
Chemical
Characteristics
Referenced
Standard
ISO 10545-2
Standard Requirements
7 cm < N < 15 cm
mm
+0,9
+0,5
+0,75
+0,75
+0,75
ISO 10545-3
ISO 10545-4
Test Result
Nominal size N
7 cm > N 15 cm
%
mm
±0,6
±0,2
±5
±0,5
±0,5
±2,0
±0,5
±1,50
±0,5
-0.01%-+0.01%
-0.32%-+0.87%
±2,0
Eb <0,5%
Individual maximum 0,6%
0.18% Average
Individual maximum 0.22%
Not less than 1 300
Not less than 700
2486 N
>47.9 N/mm2 Average
Individual maximum
42.4MPa
Minimum 35
Individual minimum 32
ISO 10545-6
Maximum 175
ISO 10545-7
Report abrasion class and cycles passed
ISO 10545-8
Test Method Available
ISO 10545-9
Test Method Available
Guaranteed
ISO 10545-12
Required
Guaranteed
Minimum class 3
Class 5
Class 3
Resistance to Staining
a) Glazed tiles
b) Unglazed tiles e
ISO 10545-14
Test Method Available
Resistance to Chemicals
Safety
Characteristics
Resistance to low concentrations
of acids and alkalis:
a) glazed tiles;
b) unglazed tiles;
Oil Wet Ramp
Wet Pendulum
ISO 10545-13
AS 4586
Manufacturer is to state classification
GLA(V)
Test Method Available
R9 (Natural)
R11 (External)
W (Natural)**
P5 (External)**
Colour Variation
V2
Test results are supplied by the manufacture and are accurate at the time of printing the above specification information.
**The Belgium Stone natural finish was wet pendulum tested in accordance with AS/NZS 4586 – 2004, and the external finish was wet
pendulum tested in accordance with AS 4586-2013.
National Tiles Co Pty Ltd
nationaltiles.com.au
*Terms and conditions apply.