Sprayer Controllers

Transcription

Sprayer Controllers
Sprayer Controllers
E0384
844E Sprayer Control
854 Sprayer Control
The TeeJet 844E Sprayer Control offers spraying advantages not found
in other controllers. Designed with simplicity in mind, computer-controlled
spraying has never been so easy. Simply set your target application rate and
the unique VisiFlo display on the 844 helps select the right TeeJet tip for the
application. Once spraying begins, the large display shows application rate,
volume sprayed, system pressure, sprayer speed and area covered.
The built-in planning tool on the 844E automatically displays the speed
needed to achieve the target rate with the specified tip. It will also calculate
the pressure necessary for achieving the target application rate when the
speed is entered.
The 844E is available in a complete package with the valves, cables and
sensors needed to put together a total sprayer control system, or as an
individual controller.
D
Model 844E
Model 854
Aluminum Console Housing
Easily Accessible
Programming Mode
D
Same Great Features as 844E Plus:
Large, Backlit Display
Boost Mode
Auto/Manual Control
Communication
Port for PC &
GPS Interfacing
Master Shut-Off
(5) Individual Boom Switches
Color-Coded Tip Selection Bar
A complete 844E Control will include the console and
core kit. Core kit includes 26’ cable harness and power
cable and mounting brackets. Additionally select a
speed sensor, pressure regulating valve, flow meter
and boom on/off valves (pressure sensor is optional).
#802
Flow
Meter
•Pre-Program Up to 4 Target Application Rates.
•Auto-Master can be set to automatically
switch entire boom off & on at minimum
speed, such as at end of rows.
•Auto tank fill feature allows the console
to control tank-filling operations.
•Dual boom capability means wider
ranges of speed & application rate.
•Smart Sensing automatically
selects between pressure or
flow sensors, choosing the
best sensor for that application.
•Communications por t for
printer, PC & GPS connections.
Part No.
Description
Net Ea.
SS 854
Console Only...................................................... $ 1007.00
SS 90-02108
854 Core Kit, Console, Mounting Bracket &
26’ Harness....................................................... 1208.00
Part No.
Description
Net Ea.
SS 844E
Core Kit with Control, Bracket & 26’ Harness.... $ 1077.00
SS 801
1” SP Flange Flowmeter (2.6-53 GPM)..........
320.50
SS 90-50230
1" Hose Barb Flow Meter...............................
334.50
SS 90-50232
1-1/4” Hose Barb Flow Meter.........................
332.50
SS 802
2” SP Flange Flowmeter (3-130 GPM)...........
355.00
The TeeJet 834-P Sprayer Control is specifically designed for use on smaller
SS 344BRL-24 1” Regulating Ball Valve, FPT Ports...............
162.50
sprayers and many planters applying starter fertilizer with 12-volt pumps.
SS 344BRL
1” Regulating Ball Valve, Flanged Ports.........
162.50
Rather than controlling a regulating valve, as most spray controllers do, the
SS 90-02476
Pressure Sensor for 844E & 854...................
209.00
834-P simply controls the 12-volt pumps RPM to automatically change the
SS 90-02386
GPS Speed Sensor........................................
345.50
application rate with speed changes. Pressure sensor continually measures
SS 45-20239
Extension Cable, 10’......................................
243.50
D
834-P Sprayer Control
744A Sprayer Controls
744A Series Sprayer Controls have been designed to control sprayer
booms from the tractor cab. The Pressure Adjust Switch, when connected
to a 244 Regulating Valve, allows the operator to increase or decrease
system pressure. Master Switch provides on/off control of all nozzles. Boom
Control Switch allows on/off control of individual sections of the boom for
edge spraying or spot spraying.
Model 744A Controls:
are available in 3 section
models. High quality sealed
switches. With 3/4" remote
regulating valve and 100
PSI liquid pressure gauge
lighted for night use.
12' power and 16’ cable
D
harness included. LED
lights to indicate boom
section status.
pressure near nozzles (or orifice discs) for specific nozzle rate data you
program into console. Can program in GPA for Ag/Turf spraying or in GPT
(gallons per ton) for deice “pre-wetting” of salt.
The 834-P will give you accurate ground speed oriented rate control with
minimal up front set up time. Simple plumbing and setup make this an ideal
control system for ATV sprayers, compact mobile sprayers, planters and more.
FEATURES
D
•Simple Programming & Setup
•Pressure Sensor Based Control
Means Easy Installation
•Clear Display Shows Application
Rate, System Pressure & Speed
• 25 Amp
Capacity for
Use with
Most 12 Volt
Pumps
No. 744 Console
Part No.
Switches
Valves
Reg. Valve
Net Ea.
SS 90-50149
300
$205.00
SS 90-50161
301
239.00
SS 90-50163
331
390.00
SS 90-024393
0*
0
308.00
* Includes cable harness for (3) ball valves & (1) Regulating valve (no valves included).
Model 834-P
Part No.
Description
Net Ea.
SS 834-P
Console Only...................................................... $ 411.00
SS 90-50225
Core Kit, Console, Mounting Brackets, Cables,
Booster Module, 150 PSI Pressure Sensor &
Proximity Speed Sensor.................................... 1231.00
CABLE HARNESSES
SS 45-05210
26’ Main Cable for 854 with Power & Speed
(with Fill Function)............................................. 354.50
SS 45-20065
26’ Main Cable for 834,844, & 854 with Power
& Speed (with No Fill Function) ........................ 285.00
SS 45-20239
10’ Cable Extension for 834,844, & 854 with
Power & Speed.................................................. 243.50
Output Extension Cables
for 744 Controls
Part No.
SS 45-20091
SS 45-20079
SS 45-20100
Description
8' Extension for 744A-3
15' Extension for 744A-3
Power Cable for 744A
DULTMEIER SALES • OMAHA, NE
Net Ea.
$ 35.70
61.30
24.95
(800) 228-9666
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0384