Schedule of Quantities
ABSTRACT OF COST - SCHEDULE OF QUANTITIES
Name of Work :S/I/T/C of submersible pumpset to borewell i/c service connection at Doordarshan HPT at Shimoga.
1 Supply,Installation,Testing and Commissioning of wet type submersible pumpset for a
borewell(165mm dia) of total head of about 240 mtr suitable for operation on
440V/50Hz/3 phase A/C supply with capable of discharge of (aprox ) 18 LPM including
providing Collar pipe of a length of 0.60Mtr (GI Medium) all accessories etc as required
.Texmo-/Aqua sub/similar superior make)
Supplying and fixing of 32mm nominal dia ISI marked GI pipe (B Class) of 6Mtr length i/c
cutting ,re- threading, with heavy duty coupler in the existing borewell along with
submersible pump set up to the delivery line complete with 2 coats of Zinc chromite
primer and anti corrossive paint etc as required.
Supplying and fixing the following accessories i/c cuttting the pipe and making threads etc
complete as required .
a) 32mm GI Union - (Nominal Dia)-2 Nos
b) 32mm GI TEE - (Nominal Dia)-1 No
c) 32mm GI Long Bend- (Nominal Dia)-1No
d) 32mm GI coupling with suitable Plug-1 no (Nominal Dia)
e) 32 mm nominal dia 12"long GI pipe nippple -2 nos & 6"Long GI pipe nipple -2 nos
(Nominal Dia) )
f) 32 mm (Nominal Dia) Gun Metal Gate valve (I S I approved) Leader/Neta or S S make-1
g)32 mm (Nominal Dia)Non return valve Leader/Neta or S S make-1 no. )
Supplying and laying 3x4 sqmm copper conductor PVC insulated and PVC sheathed water
proof cable conforming to IS 694 (1990) from junction box to pump sets i/c making
connection along with existing GI pipe & binding /drawing Existing PVC pipe from bore well
to pump panel etc complete as required.
5 Supplying and laying 25mm dia PVC pipe along with accessories for weather proof cable
protection from junction box to bore well i/c excavation & refilling etc as required.
S/Fixing MS sheet Bore Well cover of 162 mm dia with suitable M S Clamps with Bolts &
Nuts /holes for pipe entry i/c painting and nut , bolts etc complete as required
a) In pipe of all makes.
b) In the existing masonary open duct /panel/loops/ for connections
S/M End termination with brass compression gland and Al lugs for following size of PVC
sheathed /XLPE Al conductor cable of 1.1KV grade as required..
Supplying, installation, testing and commissioning of submersible pump controller unit
suitable for 3 phase 4 HP submersible pumpset(ie suitable for pump in item no 1) along
with ammeter, voltmeter,single phasing preventor in metal enclosure i/c connections as
required (Make: L&T- MU-G6 or BCH /MECO)
Supplying and fixing
weather proof SMC box of aproximate size of
230mmX170mmX105 mm with front opening cover suitably mounted on a masonary
pillar of appropriate height ,including providing cable entry pipe made of 50mm dia
PE80/PN6 HDPE pipe ,plastering, painting the pillar etc as required.
P/F 6 SWG GI wire on surface or in recess for loop earthing along with existing surface
/recessed conduit /submain wiring /cable as required.
Providing and fixing of 32 A TPN Switch disconnector fuse unit on the existing panel board
with suitable fixing arrangement ,inter connections etc as required.
S/L of 4X16 sqmm PVc insulated , PVC sheathed /XLPE al armoured UG cable of 1.1 KV
grade confirming to IS:1554 (Part I) with up todate amendments in the following modes
S/Laying of 50mm dia (Nominal OD) PE 80, PN 6 grade HDPE pipe with ISI mark in ground
(50mm deep) i/c excavation and refilling etc as required.
Executive Engineer (Elect.)
3Ph 100mm submersible pump set 4HP/40 stage with adischarge out let of 30mm (A
discharge out let of 30mm (As perTRF 740 H )MRP Rs27840/- Collected from TEXMO 080-25744342/25744343