BOS Q08M-PS-LE20-00,2-S49 BOS0197

Photoelectric sensor
BOS Q08M-PS-LE20-00,2-S49
BOS0197
1) Optical axis 2) Light reception
„„
„„
„„
„„
Photoelectric sensor
Series Q08M
Laser red light
up to 5 m
General attributes
Adjuster
Approvals / Conformity
Basic standard
Enclosure Type per IEC 60529
Indicator
Polarity reversal protected
Reference emitter
Series
Short circuit protected
No
CE
cULus
IEC 60947-5-2
IP67
Light receipt - LED YE
yes
BOS Q08M-X-LS20-..
Series Q08M
yes
Electrical attributes
Connection type
Eff. operating current Ie
Eff. operating voltage Ue DC
Electrical version
Load capacitance max. (at Ue)
No-load current max. Io at Ue
Operating voltage UB max. DC [V]
Operating voltage UB min. DC [V]
Rated insulation voltage Ui
Ripple max. (% of Ue)
Switching freq. f max. (at Ue)
Switching function
Switching output
Voltage drop Ud max. (at Ie)
Cable with connector
100 mA
24.0 V
DC, direct current
0.10 µF
9 mA
30.0 V
9.6 V
75 V DC
15 %
400 Hz
NO
PNP (1x)
2.5 V
Mechanical attributes
Ambient temperature Ta max.
Ambient temperature Ta min.
50 °C
0 °C
Internet
Balluff Germany
Balluff USA
Balluff China
www.balluff.com
+49 (0) 7158 173-0, 173-370
1-800-543-8390
+86 (0) 21-50 644131
Cable jacket material
Cable length
Connector type
Eff. operating distance Sr
Housing material
Length 1
Length 2
Length 3
Mounting type
Operating range Ro
Range Sn
Sensing face material
Style
Surface protection
PUR
0.20 m
M8x1-S49
3000 mm
GD-Zn
8.0 mm
8.0 mm
44.0 mm
Screw M3
0...3 m
Sn = 3 m
PMMA
Block, 90° connection
Nickel-plated
Optical attributes
Light type
Principle of optical operation
Switching function, optical
Laser red light
Receiver
NO: dark-on
Additional text
Order accessories separately.
With connector, e.g. BKS-S 49-… total length = switch length +12 mm.
Against line-induced noise an external protection is recommended e.g.capacitor (≥20nF)
to ground (please refer to "Information EMC protection" document No. 864234).
For surge withstand capability IVW and BURST an external protection circuit is
recommended (please refer to “Information EMC protection” drawing No. 825345).
The sensor is functional again after the overload has been eliminated.
Only for NFPA 79 applications (machines with a supply voltage of maximum 600 volts).
Device shall be connected only by using any R/C (CYJV2) cord, having suitable ratings.
For definitions of terms, see main catalog
Subject to change
BOS0197_181645_09/04/151(1)