power plant coating systems: selecting and sourcing

Transcription

jpcl
PAINTSQUARE.COM
JOURNAL OF PROTECTIVE COATINGS & LININGS
POWER PLANT
COATING SYSTEMS:
SELECTING AND SOURCING
A JPCL eResource
Power Plant Coating Systems:
Selecting and Sourcing
A JPCL eBook
Copyright 2013 by
Technology Publishing Company
2100 Wharton Street, Suite 310
Pittsburgh, PA 15203
All Rights Reserved
This eBook may not be copied or redistributed
without the written permission of the publisher.
Contents
ii
SPONSORED BY
Contents
iv Introduction
1 Protecting Scrubbers in Power Plants:
How History Stacks Up
by Gary Hall, Sauereisen, Inc., Pittsburgh, PA
7 Coating System Guide for Power Plants
18 Coatings Company Profiles
LET’S REDEFINE
PERFORMANCE
DISCOVER THE WIDE RANGE OF SEAL FOR LIFE TECHNOLOGIES
FOR A SUSTAINABLE WORLD
Introducing the Seal for Life Industries – the strongest product line in the market combining high tech
corrosion prevention, sealing and insulation solutions. Solutions with direct, easy, cost and
time-saving applications to protect the integrity of critical infrastructure assets. Seal for Life
unites us and runs through all we do – One family, One goal, One Mission – to engineer the best
performance based infrastructure solutions on the planet. With a worldwide presence, whatever
and wherever the project, we can provide the safest and most energy efficient solution to meet your needs.
Seal for Life is our commitment – both to you and to a sustainable world for us all.
European Office: Westerlo, Belgium Tel. +3214722500. Mail: [email protected]
Manufacturing sites: Houston - USA, Tijuana - Mexico, Westerlo - Belgium, Baroda - India, Stadskanaal - Netherlands, Dammam - Saudi Arabia
Introduction
iv
Introduction
This eBook consists of a feature published in JPCL on protecting scrubbers in power plants, as well as JPCL Buying Guide material on selecting
and specifying coatings for power plant applications in various exposure
environments. Author information and company information are based on
the dates of original publication of these materials.
The Buying Guide is organized by various exposure types, such as
“Chemical/Water Exposure, Caustic or Acid” for steel substrates. Then,
coating manufacturers are listed in alphabetical order and their preferred
system is named in both proprietary and generic terms. Finally, contact
details are given for all the companies.
This collection is designed to provide general guidance on selecting and
specifying coatings for power plants, and then to give sources for acquiring the appropriate systems.
iStock
1
By Gary Hall,
Sauereisen, Inc.,
Pittsburgh, PA
Protecting Scrubbers
in Power Plants:
How History Stacks Up
S
ince ancient times, man has built chimneys for heat. Originally, these were made from dried
straw and mud bricks laid in straw and mud mortars, hence, the mason’s use of the word
“mud” to indicate mortar.
As materials and ceramic sciences advanced, so did modern power plant stack construction. In the early- to mid-20th century, engineers began specifying refractory brick and sodium
silicate mortar for stacks. The last four decades have seen multiple paradigm shifts in the power generation industry. Foremost of these changes was the enactment and implementation of the Clean Air Act (CAA) of 1970,
which mandated that the power industry change the design of power plants to prevent air pollution. At first, the
industry’s answer was to build very tall stacks in order to get the pollutants into the jet stream.
Soon, however, it became clear that the power industry facility owners would have to install “scrubbers” in
their plants to keep the pollutants out of the jet stream, and, today, most fossil fuel-fired boilers have scrub-
Editor’s Note: This article, by Gary Hall, is part of the series of
Top Thinker articles appearing in JPCL throughout 2012.
Mr. Hall is one of 24 recipients of JPCL’s 2012 Top Thinkers:
The Clive Hare Honors, given for significant contributions to the
protective coatings industry over the past decade. The award is
named for Clive Hare, a 20-year contributor to JPCL who
shared his encyclopedic knowledge of coatings in many forums.
Professional profiles of all of the award winners, as well as an
article by Clive Hare, were published in a supplement to the
August 2012 JPCL. Mr. Hall’s article was first published in the
September 2012 JPCL.
bers. Scrubbers reduce the exhaust temperatures of
the flue gas to the point at which acids entrained in the
gas condense from the gaseous state to a liquid. The
liquid acid condenses inside the scrubber. Hence, in
order to protect the scrubber module, the duct work,
and the exhaust stack from attack by this acid, it became necessary to apply a protective barrier.
Newer regulations regarding mercury (Hg) removal
have had little additional effect on corrosion rates or
Photos courtesy of Sauereisen, Inc.
2
mechanisms; however, with the advent of a regulation requiring power generators to capture and control “greenhouse gasses” (GHG), such as carbon dioxide (CO), the industry will
need to work its way through another paradigm shift. Carbon capture and sequestration
(CCS) is an important part of transitioning to lower carbon energy. However, integrating
CCS with existing power plants and technologies on a broad scale will present many challenges and will result in additional opportunities for coatings manufacturers and installers,
although at an increased cost to the customer. (EPA has ruled that GHG fall under the
Clean Air Act. The Agency is currently enforcing regulations on new facilities. EPA says it is
taking a “common sense approach” to full implementation and that it will occur in stages.)
This article elaborates on the trends and materials of protection in fossil fuel-fired power
plant ducts and stacks.
Historical Development
The power generating industry poses many problems for steel protection because of elevated temperatures, aggressive chemical environments, and mechanical stresses. Engineers and plant operators have tried many ways to prevent corrosion. At first, either
free-standing brick stacks or brick flues inside concrete chimneys (“windshields”) were
used. The brick in these stacks was essentially refractory brick (i.e., with a high melting
point). It was thought that refractory materials would last longer because of their ability to
withstand high temperatures. As it turned out, the chemical composition of the brick was
also well suited to withstand corrosion by H2SO4. These brick chimneys were laid with an
acid-resistant mortar. To this day, power plant stacks built in this manner have proved to
provide the longest service life of any of the other constructions. This is not to say that
brick chimneys are maintenance free. Brick work can crack. Brick stacks can lean toward
the breeching because of moisture absorption and elevated temperatures in the brick opposite the breeching. Today, however, not many new power plant stacks are constructed
with brick because of the cost and time to construct. There are brick stacks in service
today that were built more than 70 years ago.
Prior to the enactment of the Clean Air Act in 1970, power plant stacks were considered
a major stationary source for acidic pollutants (“acid rain”). Studies verified the damage to
the environment from acid rain. In response, the industry began constructing stacks tall
enough to get the stack gases up into the prevailing winds (some were more than 1000feet high, and, in an effort to control costs, steel stacks were often chosen over brick construction). Building higher stacks was merely relocating the problem, further downwind.
Finally, the EPA mandated that these acid-bearing gas streams be cleaned. Further, the enFig. 1: Acid-resistant brick and mortar application in bricklined chimney base section
abling legislation initially mandated the Best Available Control Technologies (BACT) to clean
acidic pollutants from the exhaust stream. This legislation spawned a couple of new industries. The first was the development of scrubbers and other means of cleaning flue gas
streams, which in turn led to the development of corrosion-resistant materials of construction for the scrubbers. These two industries now account for more than several hundred
thousand positions ranging from sales to R&D, engineering, and construction.
Scrubbers spray water and a dissolved alkali such as lime (CaO) into the gas stream
after it exits the boiler. This alkali solution not only neutralizes the sulfuric acid (H2SO4) in
the gas stream, but it also dramatically lowers the gas stream temperature. The temperature reduction results in the gas stream being below the dew point for H2SO4. Once the
dew point is reached, the H2SO4 gas condenses and forms liquid H2SO4 within ducts and
stacks. The condensed H2SO4 can cause severe corrosion, which has to be controlled to
3
preserve the integrity of the plant.
In the 1960s and early 1970s, power plants began to experience severe corrosion as scrubbers gradually
were installed. The reader may be surprised to learn that today, 40 years after the enactment of the CAA, more
than 100 power plants continue to fight the EPA mandates. Some of these units have been closed; others still
operate without being in compliance.
With the advent and proliferation of wet scrubbers,
design engineers began to learn an entirely new discipline: Flue Gas Desulfurization (FGD). FGD and the resultant severe corrosion past the scrubber module
opened opportunities for new product development
and new applications for existing products.
The coatings industry has tried, with varying degrees
of success, several methods to combat the increased
corrosion. Stacks had long been constructed of brick.
Manufacturers developed acid-resistant mortars to
bond these refractory bricks (Fig. 1). These acid-resistant mortars eventually evolved to those made of
potassium silicates, albeit with differing curatives employed to cause the mortars to set into a cohesive
mass. Most of these stacks are still in service today,
having lasted for more than their original projected
service lives.
Fig. 2: Application of acid-resistant concrete by gunite method over “T” anchors in ductwork.
Some options, such as stainless steel alloys, were
just too expensive for general use. During this same period (1970s and early 1980s), engineers
began to use gunited acid-resistant refractories for new construction and for repair of cracked
brick stacks. These refractories were generally applied over an acid-resistant membrane to keep
the condensing acid from penetrating the gunite and reaching the substrate. These gunited linings
were also susceptible to cracks and spalling due to movements of the stack, which will change
shape to an oval, bend, and sway. These liners are still used occasionally today. Some of the originally gunited stacks are still in service after more than 30 years (Figs. 2, 3, and 4).
Organic Coatings
Beginning in the 1980s, coatings manufacturers began offering organic coatings to line scrubber
modules, exit ducts, and stacks. As gas temperatures dropped due to scrubbing, the organic liners
began to find a niche. Organic liners used in power plant ducts and stacks are usually based on novolac vinyl esters, although novolac epoxies are also used. One of the most successful approaches
has been to apply a flake- or fiber-filled novolac epoxy or vinyl ester lining. These linings are applied
at a dry film thickness (DFT) of 40 mils or higher. The flake- as well as the fiber-reinforced vinyl ester
linings (Fig. 5) can withstand flue gasses up to 400 F (204 C), whereas the novolac epoxy variants
can be used up to ~350 F (177 C). Applied by airless spray or by catalyst injection, plural-compoFig. 3: Acid-resistant gunite application in FGD
scrubber system.
nent airless spray, these liners can be applied in a fraction of the time that would be required to lay
brick. They are ready for service less than three days after application. While a low temperature
post cure (<125 F [52C]) is beneficial, it is not always practical.
Unlike all of the other liners discussed earlier (except metal alloys), vinyl esters and epoxies have very low
permeance. Like the other liners, they have excellent chemical resistance. Combining impermeability with chemical resistance offers plant owners a viable alternative to brick and mortar, gunite/membranes, and the very expensive stainless alloys. The vinyl ester and epoxy linings have had an excellent track record (Fig. 5). An
4
additional attractive feature with these liners is the relative ease of repair. Service life for the organic linings is
more than 10 years in most instances.
Acid-Proof Refractory Linings
Another successful lining system for stacks is a dual-component liner consisting of a high-temperature, corrosion-resistant membrane topped with an
acid-proof refractory lining. These chemical-resistant refractories are typically
based on potassium silicate, although at least one sodium silicate refractory
was also marketed for a while. There are sharp distinctions between the
potassium and the sodium silicates.
Sodium silicate-bonded refractories will react with liquid H2SO4 to form
sodium sulfate dihydrate. The dihydrate will take up and bind chemically
(chemisorb) with water from wherever it is available and will continue to do
so until the dihydrate (having two water molecules) has become a decahydrate (having 10 water molecules). As the dihydrate chemisorbs these eight
additional water molecules, the molecular volume increases by a factor of
tenfold or more. This hydration-induced expansion will cause cracking and
spalling in the mass of the refractory.
Potassium silicates cannot chemisorb additional water molecules because of a phenomenon known as ‘steric hindrance,’ and thus are not subject to hydration-induced expansion and resulting cracking and spalling.
Borosilicate Glass Blocks
Other means of protection have been met with varying degrees of success.
Linings made of foamed borosilicate glass blocks have been used to line
several utility and industrial stacks. Some failures have occurred. Anecdotal
Fig. 4: 500-foot steel stack in southwestern PA with gunite/membrane lining
evidence indicates these failures were predominantly in units that operate
wet, i.e., more than about 6% H2O by volume of the exhaust stream. The
blocks are set in a variety of mastics/mortars including an asphalt-modified
urethane; a urethane; a potassium silicate-bonded, borosilicate glass-filled mortar; a silicone; and a
modified butyl rubber. The blocks do not provide good thermal shock resistance, however, because
they have a low coefficient of thermal expansion (cte), low modulus of elasticity, low brittle strength,
and very low thermal conductivity. To provide good thermal shock resistance, the lining must provide
good to excellent strength, high thermal conductivity, a very low cte, and a very low modulus of elasticity.
Compared to other liners such as brick or chemical-resistant refractory/membrane, the thermal
stress index for borosilicate block is quite low. In fact, in order to function as a liner, the blocks must
be set in a highly flexible “mortar and setting bed.” The blocks have very poor abrasion resistance,
which must be considered because of the high lead (Pb) content in the foamed glass. If abraded, the
Fig. 5: Scrubbed gas duct entering chimney
Pb can be carried out of the stack by the stack exhaust, creating other risks to the environment and
the public.
Calcium Aluminate Cement Linings and Mortars
Another type of corrosion-resistant gunite and mortar with a long and successful history as stack liners is
based on calcium aluminate cement (CAC). CAC-based linings and mortars, while not as acid resistant as potassium silicates, do offer better refractoriness. CACs are more crystalline than are potassium silicates (Fig. 6).
5
This property improves their response to thermally induced stress. Linings and mortars based on CACs will
usually have a high thermal stress fracturing index value. Calcium aluminates are useful over a pH range of ~4
to ~12, depending on the mix design and the chemicals to which they are exposed. CACs perform best in
chemical environments with low moisture content. In fossil fuel-fired plants, that means using a fuel source
whose combusted analysis yields less than ~6% water (H2O). In addition, the
plant should use low sulfur or clean coal, or a light sweet crude oil to get
low sulfur content, all of which are more expensive than regular coal. The
plant must also operate at least 5 degrees F above the dew point to prevent
acid condensate from forming. Gas temperatures, however, can easily range
+/- 50°F (28°C) from the mean. That means that to be safe, the gas temperatures would need to be ~50°F (28°C) above the acid dew point, or you
would need to find a way to control gas temperature within a fairly narrow
range. CACs can function in these situations provided water content is <6%
by weight.
Fiber-Reinforced Plastics
Some utilities have tried fiber-reinforced plastic (FRP) stacks, typically made
from either chlorendic polyesters or novolac vinyl esters. These liners are a
potential fire hazard unless made from brominated resins and/or contain additives that render the resin fire resistant. Such additives include antimony
trioxide (SbO3) and hexabromocyclododecane, among others. Both are now
on the EPA’s list of Substances of Very High Concern (SVHC) and listed as
carcinogens and reproductive system toxins.
Summary
Since ancient times, man has built chimneys. In the early- to mid-20th century, power plant engineers began specifying refractory brick construction,
ultimately with an acid-resistant sodium silicate mortar for the chimneys or
stacks as they are called. Later variations saw the dominance of potassium
Fig. 6: (left): Newly erected “scrubbed” chimney; (right):
older, taller brick-lined stacks
silicate mortars.
In 1953, a gunite-applied, acid-resistant refractory was introduced. This
gradually changed to acid-resistant gunite applied over high-temperature and
acid-resistant membranes in the 70s.
In the latter third of the 20th century, vinyl ester and epoxy linings were being used for corrosion protection
because of the introduction of FGD scrubbers. The linings can provide excellent chemical resistance and are
flake- and/or fiber-filled to enhance permeance and flexural properties.
If the EPA wins the ability to regulate GHG and carbon footprints, CCS will force yet another paradigm shift.
The coatings industry will need to respond by developing new products to help protect this vital part of the infrastructure. The lower installation cost associated with organic high-build coatings has made them the preferred method for achieving corrosion protection today.
Gary R. Hall is manager of research and development at Sauereisen, Inc. (Pittsburgh, PA).
He has been with Sauereisen for 44 years. Hall is active in NACE, ASTM, and the American Institute of Chemical Engineers. He is a contributing editor for JPCL and also is one of
JPCL’s Top Thinkers. JPCL
LET’S REDEFINE
PERFORMANCE
DISCOVER THE WIDE RANGE OF SEAL FOR LIFE TECHNOLOGIES
FOR A SUSTAINABLE WORLD
Introducing the Seal for Life Industries – the strongest product line in the market combining high tech
corrosion prevention, sealing and insulation solutions. Solutions with direct, easy, cost and
time-saving applications to protect the integrity of critical infrastructure assets. Seal for Life
unites us and runs through all we do – One family, One goal, One Mission – to engineer the best
performance based infrastructure solutions on the planet. With a worldwide presence, whatever
and wherever the project, we can provide the safest and most energy efficient solution to meet your needs.
Seal for Life is our commitment – both to you and to a sustainable world for us all.
European Office: Westerlo, Belgium Tel. +3214722500. Mail: [email protected]
Manufacturing sites: Houston - USA, Tijuana - Mexico, Westerlo - Belgium, Baroda - India, Stadskanaal - Netherlands, Dammam - Saudi Arabia
7
SPONSORED BY
iStock
Coating System Guide
for Power Plants
Listings are alphabetized by company name.
CIM Industries
CIM
Urethane Elastomeric (1 Coat)
Highland International, Inc.
74 Chem-Temp Epoxy
Epoxy Novolac (1 or 2 Coats)
Copolymer Protection Systems
ChemProof Polymers/PermaTec
Epoxy/Epoxy 100% Solids
HJ3 Composite Technologies
HJ3 CarbonSeal Industrial Systems
Epoxy/Epoxy Novolac (2 Coats)
Advanced Polymer Coatings, Ltd.
ChemLine
Other
Corchem
Corchem 258
Induron Coatings, Inc.
PermaSafe 100 Ceramic Epoxy
Epoxy 100% Solids (1 or 2 Coats)
Altex Coatings Ltd.
Carboguard 696 UHBE
Corotech High Performance Coatings
Corotech
Epoxy/Epoxy/Epoxy
Industrial Nanotech Inc.
Nansulate EPX
Epoxy/Epoxy Phenolic (2 Coats)
Amercoat Canada
Amercoat
Cortec Corporation
VpCI-396
MCU/MCU/MCU
Instacoat Premium Products
Instacoat
Other
Andek Corporation
Andek Encapsall Super
Urethane/Urethane
Crossfield Products Corp.
Dex-O-Tex
International Paint LLC
International
Armor Plate, Inc.
Armor Plate 800
Other
Denso North America
Denso
Vinyl Ester/Vinyl Ester/Vinyl Ester
ITW American Safety Technology
AS-250
Epoxy/Epoxy/Epoxy
Atlas Minerals & Chemicals, Inc.
Carbo-Alkor
Brick and Tile, Acid-Resistant
Diamond Vogel Paint Company
Mult-E-Prime 500/Multi-Thane 330 or 340
Epoxy (1-2 Coats)/Urethane
ITW Devcon
Brushable Ceramic
Epoxy/Epoxy/Epoxy
Avilion Inc.
Enviroline
Enecon Corporation
Chemclad XC
ITW PolySpec/Futura Coatings
Futura
Belzona, Inc.
Belzona 4311
Enviroline (International Paint LLC)
Enviroline
KCC Corrosion Control Co., Ltd.
Techni-Plus VE 62
Blome International/Part of the Hempel Group
Versi-Line
ErgonArmor
Novocoat
Kema Coatings LImited
Kema
Bowers Industrial
Duromar
FSC Coatings Inc.
Rustop/SP-X Silicone Poly Plus
Micor Company, Inc.
Micorox 145
Carboline Company
Plasite
Gemite Products Inc.
Gem-Cote EP 100
NCFI Polyurethanes
EnduraTech
Alkyd/Acrylic/Acrylic
Ceilcote (International Paint LLC)
Ceilcote
Global EcoTechnologies
Endura-Flex
NSP Specialty Products
NSP-120 High Performance Epoxy Coating
Chemtreat India Ltd.
Chemtuff
Gulf Coast Paint Mfg., Inc.
GCP
Epoxy/Epoxy/Epoxy
Polibrid Coatings, Inc.
Polibrid 705
Chemical/Water Exposure
Caustic or Acid
Steel
Heresite Protective Coatings, LLC
Heresite
Other
paintsquare.com / JPCL October 2012 83
8
Power
Plants
Power
Plants
SPONSORED
BY BY
SPONSORED
Polycoat Products
Polyeuro 8245
Polyurea Hybrid (1, 2, or 3 Coats)
U.S. Coatings, LLC
GripLine
Ceilcote
Polycorp Ltd.
Polycorp/Polymeric
Sheet Lining, Rubber
Wasser Corporation
Wasser
Organic Zinc/Polyurea (Pure)
ChemCo Systems
CCS High Chemical Resistance
PPC Coatings (MTR)
PPC Coatings
Other
Watson Coatings, Inc.
Armorex
ChemMasters, Inc.
Duraguard 500 Series
Wilko Paint, Inc.
Wilkoshield
Chemtuff
Willamette Valley Company
PolyQuik
Polyurea Pure (1, 2, or 3 Coats)
CIM Industries
CIM
ZRC Worldwide
ZRC Zero-VOC Cold Galvanizing Compound
Zinc-Rich, Inorganic
PPG Protective & Marine Coatings
Amercoat
Protective Floor and Linings Div Milamar Ctgs.
PF&L 2900LS
Rema Tip Top/North America Inc.
Coroflake
Rhino Linings Corporation
Rhino HiChem
Rodda Paint Co./Cloverdale Paint
ClovaLine
Roval USA Corp.
Roval R22 Cold Galvanizing Compound
Zinc-Rich, Organic
Rust Bullet, LLC
Rust Bullet Standard
Other
Sauereisen, Inc.
Sauereisen
Sherwin-Williams
ExpressCote HCR FF
Epoxy Flake Filled/Epoxy Flake Filled
Simpson Strong-Tie/Fox Industries
Fox FX-3110SW Chem Resist Ctg
Specialty Products, Inc. (SPI)
PTU, Polyshield HT-100F, Polyshield HT
Stirling Lloyd Group Plc.
Integritank
Methyl Methacrylate/Methyl Methacrylate
Subsea Industries NV
Ecospeed
Thermion
Thermion
Thermal Spray
Thin Film Technology, Inc.
Bio-Gard 251/257/258
Inorganic Zinc/Epoxy 100% Solids
3L&T Inc.
CorrosionGard-160S
Other
TIB Chemicals AG
Prodotex
Epoxy Coal Tar High Build (1 or 2 Coats)
Caustic or Acid
concrete
AcryliCon Flooring Solutions
AcryliCon Decor
Other
Advanced Chemical Technologies, Inc.
Sil-Act
Siloxane/Siloxane
ChemLine
Other
Altex Coatings Ltd.
Carboguard 696 UHBE
Amercoat Canada
Amercoat
Andek Corporation
Cocoon
Arizona Polymer Flooring Inc.
Epoxy Novolac 900
Armor Plate, Inc.
Armorcoat 969 ABC+
Chempruf
Epoxy/Epoxy Flake Filled (2 Coats)
Avilion Inc.
Enviroline
Belzona, Inc.
Belzona 1391
Blair Rubber Company
Marseal 4000
Sheet Lining, Thermoplastic
Versi-Line
Bowers Industrial
Duromar
Carboline Company
Semstone
84 JPCL October 2012 / paintsquare.com
Copps Industries, Inc.
Armorgard 500
Corchem
Corchem 258
Corotech
Corro-Shield International, Inc.
Corro Hi-Cote
Dex-O-Tex
Denso North America
Denso
Mult-E-Poxy 180/Multi-Thane 330 or 340
Enecon Corporation
Chemclad
Enviroline
ErgonArmor
Novocoat
Euclid Chemical Company
Duraltex 1805
FSC Coatings Inc.
Bio-Safe System
Corro-Chem 100
Other
Endura-Flex
Poly Chem
Click our Reader e-Card at paintsquare.com/ric
10
Power
Plants
Power
Plants
SPONSORED BY
SPONSORED BY
Nansulate EPX
Epoxy/Epoxy/Epoxy
Topline
Belzona, Inc.
Belzona 1321
Instacoat
Other
Rhino HiChem
Marseal 4000
International Coatings Inc.
ICO Hi Guard
ClovaLine
Versi-Line
Ceilcote
Sauereisen, Inc.
Sauereisen
Bowers Industrial
Duromar
AS-250
Epoxy/Epoxy/Epoxy
Sherwin-Williams
Dura-Plate UHS
Carboline Company
Polyclad
ITW Devcon
Wear Guard Ultra
Epoxy/Epoxy/Epoxy
Ceilcote
Futura
Polyprime-100, PTU, Polyshield HT-100F
Chemtuff
Kaufman Products, Inc.
K Pro CRS
SpeedCove Precast Cove Base Systems
Other
ChemProof Polymers
Techni-Plus VE 62
Integritank
Corchem
Corchem 261
Key Resin Company
Key 630, Key 633
Thermion
Thermion
Thermal Spray
Creative Polymers Inc.
GeoTek 4900
Kryton International Inc.
Krystol T1, Krystol T2
Other
Bio-Gard 251/257/258
Dex-O-Tex
Micor Company, Inc.
Micorox 145
U.S. Coatings, LLC
GripLine
Denso North America
Denso
Tape Wraps
National Polymers Inc.
Private Label
Wasser Corporation
Wasser
Enecon Corporation
Chemclad
NCFI Polyurethanes
EnduraTech
Wilko Paint, Inc.
Wilkoshield
ErgonArmor
Novocoat
Northern Industries Inc.
NI-Dura Hydro-Glaze Epoxy
Epoxy/Epoxy/Epoxy
PolyQuik
FSC Coatings Inc.
Bio-Safe/DeckMaster
Polibrid 705
Polycoat Products
Polyeuro 8245
Polycorp Ltd.
Polycorp/Polymeric
PPC Coatings (MTR)
PPC Coatings
Other
Amercoat
PF&L 3300CR
Corro-Chem 100
Other
Wet Fly Ash
Endura-Flex
Steel
ChemLine
Other
Altex Coatings Ltd.
Reactamine 760
Amercoat Canada
Amercoat
Andek Corporation
Encapsall Super
Urethane/Urethane
Armor Plate, Inc.
Armor Plate 800
Other
Carbo-Alkor
Brick and Tile, Acid-Resistant
Poly Chem
475R Dry-Fall/68R Dry-Fall
Nansulate EPX
Epoxy/Epoxy/Epoxy
11
Power
SPONSORED
BY
SPONSORED BY
Power Plants
Plants
Instacoat
Other
Thermion
Thermion
Thermal Spray
Armorex
Ceilcote
Bio-Gard 251/257/258
Wilko Paint, Inc.
Wilkoshield
AS-250
Epoxy/Epoxy/Epoxy
U.S. Coatings, LLC
GlassGrip
ZRC Worldwide
ZRC Zero-VOC Galvanizing Compound
Futura
Wasser Corporation
Wasser
MCU Zinc Rich/MCU/MCU
Techni-Plus VE 62 AR
Private Label
NCFI Polyurethanes
EnduraTech
Polibrid 705
Polycoat Products
Polyeuro 1050H
Polycorp Ltd.
Polycorp/Polymeric
PPC Coatings (MTR)
PPC Coatings
Other
Amercoat
Topline
Epoxy/Epoxy/Epoxy
Rhino Extreme
Roval USA Corp.
Zinc-Rich, Organic
Rust Bullet, LLC
Other
Sauereisen, Inc.
Sauereisen
Sherwin-Williams
Cor-Cote VEX TF
K5, Polyshield HT-100F, AMP 100
Termarust Technologies
Termarust TR2000 HR CSA Series
Calcium Sulphonate
12
Power Plants
Power Plants
Wet Fly Ash
Concrete
AcryliCon Decor
Other
Sil-Act
Siloxane/Siloxane
ChemLine
Other
Altex Coatings Ltd.
Reactamine 760
Amercoat Canada
Amercoat
Andek Corporation
Polafloor PUR
Urethane/Urethane
Armor Plate, Inc.
Armor Plate 770
Chempruf
Belzona, Inc.
Belzona 1321
Marseal 4000
Versi-Line
Bowers Industrial
Duromar
Carboline Company
Polyclad
Ceilcote
ChemCo Systems
CCS Coating Gen Purpose
ChemMasters, Inc.
Chemtuff
ChemProof Polymers
Armorgard 600T
Corchem
Corchem 262/261
Corro-Cote
GeoTek 4900
SPONSORED
BY BY
SPONSORED
Dex-O-Tex
Denso North America
Denso
Tape Wraps
Polibrid 705
Enecon Corporation
Chemclad
Polycoat Products
Polyeuro 5502
ErgonArmor
Novocoat
PPC Coatings (MTR)
PPC Coatings
Other
Duraltex 1707
Amercoat
FSC Coatings Inc.
Rustop Metallic
Urethane/Urethane
PF&L 3300CR
Cem-Kote Flex ST
Other
Topline
Epoxy/Epoxy/Epoxy
Endura-Flex
Rhino Extreme
Poly Chem
Sauereisen, Inc.
Sauereisen
Sherwin-Williams
Cor-Cote VEX FF
Nansulate EPX
Epoxy/Epoxy/Epoxy
Polyprime-100, K5, Polyshield HT-100F
Instacoat
Other
Other
ICO Hi Guard
Thermion
Thermion
Thermal Spray
International
Bio-Gard 251/257/258
AS-250
Epoxy/Epoxy/Epoxy
U.S. Coatings, LLC
GlassGrip
Iraseal
Wasser Corporation
Wasser
MCU/MCU/MCU
Techni-Plus VE 62
Wilko Paint, Inc.
Wilkoshield
Key Resin Company
Key 630, Key 633
Other
Private Label
Epoxy/Epoxy/Epoxy
NCFI Polyurethanes
EnduraTech
NI-Dura Hydro-Glass Floor
Circulating Water Pipe
Steel
ChemLine
Other
Altex Coatings Ltd.
Carboguard
Epoxy/Epoxy/Epoxy
Amercoat Canada
Amercoat
13
SPONSORED
BY
Power
SPONSORED BY
Power Plants
Plants
Belzona, Inc.
Belzona 5811
Protec II
Roval USA Corp.
Zinc-Rich, Organic
Versi-Line
Techni-Plus EN PLC
Other
Rust Bullet, LLC
Other
Bowers Industrial
Duromar
Kema Coatings Limited
Kema
Seacoat Technology
Flouro-Slik
Epoxy/Epoxy/Siloxane
Carboline Company
Plasite
Sherwin-Williams
Dura-Plate UHS
Ceilcote
Polibrid 705
Fox FX-70-9 Hydro Ester Coating
Chemtuff
Polycoat Products
Polyeuro 1050H
Polyshield HT-100F, HT, Hi-E
Corchem
Corchem 204/204/204
Epoxy/Epoxy/Epoxy
Polycorp Ltd.
Polycorp/Polymeric
Ecospeed
Corotech
Alkyd/Alkyd/Alkyd
Amercoat
Termarust TR2000 HR CSA Series
Calcium Sulphonate
Dampney Co., Inc.
Apexior
Other
Coroflake
Thermion
Thermion
Thermal Spray
Denso North America
Denso
Tape Wraps
Rhino Extreme PW
Bio-Dur, Bio-Gard
Mult-E-Prime 500/Multi-Thane 330 or 340
Enecon Corporation
Chemclad
ErgonArmor
Novocoat
FujiFilm Smart Surfaces, LLC
Duplex Silicone Fouling Release
Other
Fibre-Prime
Other
Endura-Flex
Poly Chem
Epoxy/Epoxy/Epoxy
CSE-6200
Epoxy/Epoxy/Epoxy
74 Chem-Temp Epoxy
Nansulate PT
Thermal Spray
Instacoat
Other
ITW Devcon
Wear Guard High Impact
Epoxy/Epoxy/Epoxy
14
Power
Plants
Power
Plants
SPONSORED BY
SPONSORED BY
TIB Chemicals AG
Prodotex
Epoxy Coal Tar/Epoxy Coal Tar
Cortech
Epoxy (1-2 Coats)/Acrylic (1-2 Coats)
Polycoat Products
Polyeuro 5502
TMS Metalizing Systems, Ltd.
TMS Metalizing
Thermal Spray
Corro-Cote System
Amercoat
Tnemec Company, Inc.
Hi-Build Epoxoline II
Epoxy/Epoxy/Epoxy
Denso North America
Denso
Tape Wraps
Coroflake
U.S. Coatings, LLC
MasticGrip
Rhino Extreme PW
Wasser Corporation
Wasser
MCU Zinc Rich/MCU/MCU
Enecon Corporation
Chemclad
Seacoat Technology
Flouro-Slik
Epoxy/Epoxy/Siloxane
Armorex
ErgonArmor
Novocoat
Sherwin-Williams
Dura-Plate UHS
Wilko Paint, Inc.
Wilko
Duralkote 500
Fox FX-70-9 Hydro Ester Coating
Duplex Silicone Fouling Release
Other
Polyprime-100, Polyshield HT, HT-100F
Cem-Kote Flex ST
Other
Thermion
Thermion
Thermal Spray
Endura-Flex
Bio-Dur, Bio-Gard
Poly Chem
Epoxy/Epoxy/Epoxy
Hi-Build Epoxoline II
Epoxy/Epoxy/Epoxy
U.S. Coatings, LLC
MasticGrip
Nansulate GP
Thermal Spray
Wasser Corporation
Wasser
MCU/MCU/MCU
Instacoat
Other
Wilko Paint, Inc.
Wilko
Circulating Water Pipe
Concrete
Sil-Act
Siloxane/Siloxane
ChemLine
Other
Altex Coatings Ltd.
Carboguard
Epoxy/Epoxy/Epoxy
Amercoat Canada
Amercoat
Belzona, Inc.
Belzona 5811
Versi-Line
Bowers Industrial
Duromar
Carboline Company
Plasite
Ceilcote
ChemCo Systems
CCS Coating High Chemical Resistance
Chemtuff
Armorgard 600
Corchem
Corchem 204/204/204
Epoxy/Epoxy/Epoxy
International
Epoxy/Epoxy/Epoxy
ITW Devcon
DFense Blok
Epoxy/Epoxy/Epoxy
Futura-Thane
K Pro CRS
Techni-Plus VE 62
Other
Hydro-Seal 75
Polibrid 705
FGD Stack Interiors
Steel
ChemLine
Other
Altex Coatings Ltd.
Plasite
Amercoat Canada
Polyspec FlakeRez
Chempruf
Belzona, Inc.
Belzona 1392
Boro-Block
Borosilicate Glass Block
Bowers Industrial
Duromar
15
SPONSORED BY
Power Plants
Techni-Plus VE 62, VE 62 HT
Key Resin Company
Key Vinyl Ester
Polibrid 705
Polycorp Ltd.
Polycorp/Polymeric
Amercoat
Epoxy/Epoxy Phenolic (2 Coats)
PF&L 2900LS
Coroflake
Carboline Company
Plasite
Ceilcote
Chemtuff
Corchem
Corchem 243/243/243
Corotech
Epoxy/Epoxy/Epoxy
Dex-O-Tex
Enecon Corporation
Chemclad XC
ErgonArmor
Novocoat
Gem-Cote EP 100
Heresite P-403L
Other
Instacoat
Other
Ceilcote
Futura
Sherwin-Williams
Cor-Cote VEX TF
Ecospeed
Thermion
Thermion
Thermal Spray
3L&T Inc.
StackGard-255SQW
Other
resented by Stan Liang
(CIH, CSP) of KTATator,
“Confined Space Entry on
Construction Projects: Applica
ble Standards?” will provide an
overview of OSHA’s construc
tion industry and respiratory protec
tion standards that impose confined
space entry requirements. This November’s free webinar will also
discuss how industrial painting
projects, under some circumstances,
may be regulated by OSHA under
29 CFR 1910 or the General Industry Standards. P
Date: November 21, 2012 11:00 a.m.Noon, EST
U.S. Coatings, LLC
GripLine
FGD Interiors
Steel
ChemLine
Other
Altex Coatings Ltd.
Plasite
Register at paintsquare.com/education
Sponsored by: Amercoat Canada
Polyspec PermaRez
Chempruf
Belzona, Inc.
Belzona 1392
Versi-Line
Scan this barcode with your smartphone
for more information.
74 Chem-Temp Epoxy
Sauereisen, Inc.
Sauereisen
FREE Webinar on
Confined Space
Standards in November
16
Power
Plants
Power
Plants
SPONSOREDBYBY
SPONSORED
Bowers Industrial
Duromar
PF&L 2900LS
Belzona, Inc.
Belzona 4311
Carboline Company
Plasite
Coroflake Topline
Marseal 4000
Ceilcote
Sauereisen, Inc.
Sauereisen
Versi-Line
Chemtuff
Bowers Industrial
Duromar
Corchem
Corchem 243/243/243
Carboline Company
Semstone
Corotech
Epoxy/Epoxy/Epoxy
Ceilcote
Dex-O-Tex
Epoxy/Epoxy/Epoxy
Enecon Corporation
Chemclad XC
ErgonArmor
Novocoat
Gem-Cote EP 100
Heresite P-403L
Other
74 Chem-Temp Epoxy
Instacoat
Other
Ceilcote
Futura
Techni-Plus VE 62, VE 62 AR
Key Resin Company
Key Vinyl Ester
Polibrid 705
Polycorp Ltd.
Polycorp/Polymeric
Amercoat
Epoxy Zinc-rich/MCU/MCU
Sherwin-Williams
Cor-Cote VEX TF
Ecospeed
Thermion
Thermion
Thermal Spray
3L&T Inc.
FlueGard-225SQC
Other
U.S. Coatings, LLC
GripLine
Wilko Paint, Inc.
Wilko
Secondary Containment
Concrete
Sil-Act
Siloxane/Siloxane
ChemLine
Other
Altex Coatings Ltd.
Semstone 145 AFC
Amercoat Canada
Amercoat
Epoxy/Epoxy/Epoxy
Andek Corporation
Polafloor PUR
Urethane/Urethane
Epoxy Novolac 900
Armor Plate, Inc.
Armorcoat 969 ABC
Avilion Inc.
Enviroline
ChemCo Systems
CCS High Chemical Resistance
ChemMasters, Inc.
Chemtuff
CIM Industries
CIM
Armorgard 600T
Corchem
Corchem 262/258/258
Corro Hi-Cote
GeoTek 4900
Dex-O-Tex
Enecon Corporation
Chemclad XC
Enviroline
ErgonArmor
Novocoat
Duraltex 1707
Florock, Crawford Labs, Inc.
Florock
17
SPONSORED BY
Power Plants
FSC Coatings Inc.
Rustop Metallic
Urethane/Urethane
Polibrid 705
Corro-Chem 100
Other
Polycoat Products
Polyeuro 5502
Endura-Flex
PPC Coatings (MTR)
PPC Coatings
Other
Poly Chem
Amercoat
Epoxy/Epoxy/Epoxy
Heresite CSE-6200
Epoxy/Epoxy/Epoxy
Premier Coating Systems Inc.
PCS-#1100
Other
PF&L 3300CR
Nansulate GP
Thermal Spray
Coroflake
Instacoat
Other
Rhino Hybrid
ICO Super Guard
ClovaLine
International
Sauereisen, Inc.
Sauereisen
Geothane
Sherwin-Williams
Cor-Cote HCR FF
Elasti-Liner I, II, III
Other
Kema
Polyprime-100, Polyshield HT-SL, HT-100F
Key Resin Company
Key Vinyl Ester
Other
Other
Integritank
Micor Company, Inc.
Micorline HT47
Termaflex TX4000 Series
Other
Private Label
3M Infrastructure Protection Division
Scotchkote
NCFI Polyurethanes
EnduraTech
Epoxoprime/ChemBloc
NI-Dura 1054 Novolac
U.S. Coatings, LLC
GripLine
VersaFlex Incorporated
VF 380
Pacific Polymers (A Division of ITW)
Rescrete RCCR
Wasser Corporation
Wasser
Wilko Paint, Inc.
Wilko
Epoxy/Epoxy/Epoxy
PolyQuik
SPONSORED
BY
Power
Plants
Primary Containment
(Nuclear Only)
Altex Coatings Ltd.
Other
Amercoat Canada
Amercoat
Epoxy/Epoxy/Epoxy
Avilion Inc.
PPG
Epoxy/Epoxy/Epoxy
Bowers Industrial
Duromar
Carboline Company
Carbozinc
Inorganic Zinc/Epoxy/Epoxy
Corchem
Corchem 255/255/255
Epoxy Phenolic (3 Coats)
GeoTek 7215
Enecon Corporation
Chemclad
ErgonArmor
Novocoat
74 Chem-Temp Epoxy
Instacoat
Other
Techni-Plus VE 62
Polibrid 705
Amercoat
Epoxy/Epoxy/Epoxy
Rhino Extreme
Sauereisen, Inc.
Sauereisen
Sherwin-Williams
Dura-Plate UHS N
Polyshield HT-100F, HT, PTU
Integritank
Bio-Dur 560, Bio-Dur 561
18
company profiles
A
Abatron, Inc.
5501-95th Ave.
Kenosha, WI 53144
Phone: 800-445-1754
Contact: Marsha Caporaso
[email protected]
abatron.com
2905 Jordan Crt., Ste. B, #301
Alpharetta, GA 30004
Phone: 888-736-7550
Contact: Jason Bye
[email protected]
acrylicon.com
Acrymax Technologies, Inc.
221 Brooke St.
Media, PA 19063
Phone: 800-553-0523
Contact: Eric Bennung
[email protected]
acrymax.com
Advanced Chemical
Technologies, Inc.
100 W. Wilshire Blvd., Ste. C-1
Oklahoma City, OK 73116
Phone: 800-535-0433
Contact: Kevin Brown
[email protected]
advchemtech.com
951 Jaycox Rd.
Avon, OH 44011
Phone: 800-334-7193
Contact: Jim DeChant
[email protected]
adv-polymer.com
Alistagen Corporation
Ten Park Ave.
New York, NY 10016
Phone: 212-317-0100
Contact: Alis Yeterian
[email protected]
alistagen.com
Altex Coatings Ltd.
PO Box 142
Tauranga, 3140 New Zealand
Phone: 64 7 541 2327
Contact: Ricky Collins
[email protected]
altexcoatings.co.nz
Amercoat Canada
1174 South Service Rd. W
Oakville, ON L6L 5T7 Canada
Phone: 905-847-1500
Contact: Daniel Agnew
[email protected]
amercoatcanada.com
Andek Corporation
850 Glen Ave., PO Box 392
Moorestown, NJ 08057
Phone: 800-800-2844
Contact: Neil Shearer
[email protected]
andek.com
7731 N 68th Ave.
Glendale, AZ 85303
Phone: 888-855-3455
Contact: Daniel Owen
[email protected]
apfepoxy.com
See our display ad, p. 60.
Arizona Specialty Coatings LLC
21242 N. Black Canyon Hwy., Ste. A
Phoenix, AZ 85027
Phone: 623-780-3336
Contact: Pete Postiglione
[email protected]
azpolyurea.com
Arkema Inc.
900 First Ave., Bldg. 10
King of Prussia, PA 19406
Phone: 610-205-7898
Contact: Vince Casmirri
[email protected]
kynar500.com
Armor Plate, Inc.
PO Box 5625
Pasadena, TX 77508
Phone: 337-540-7606
Contact: Tommy Precht
[email protected]
armorplateinc.com
1227 Valley Rd., PO Box 38
Mertztown, PA 19539
Phone: 610-682-7171
Contact: Scott Gallagher
[email protected]
atlasmin.com
Avilion Inc.
3947 Lincoln Hwy.
Downingtown, PA 19335
Phone: 610-942-7388
Contact: Michelle Morkun
[email protected]
avilioninc.com
B
BASF Corporation
Building Systems
889 Valley Park Dr.
Shakopee, MN 55379
Phone: 800-433-9517
Contact: Customer Service
[email protected]
buildingsystems.basf.com
Bechtel Industrial Coating Supply
21424 SE 16th Pl.
Sammamish, WA 98075
Phone: 425-392-1876
Contact: Robert Bechtel
[email protected]
bechtelcoatingsupply.com
Belzona, Inc.
2000 NW 88th Crt.
Miami, FL 33172
Phone: 305-594-4994
Contact: Kelli Cleveland
[email protected]
belzona.com
5020 Panther Pkwy.
Seville, OH 44273
Phone: 888-276-1400
Contact: Howard Golden
[email protected]
marseal.com
19
Blome International
Part of the Hempel Group
1450 Hoff Industrial Dr.
O’Fallon, MO 63366
Phone: 636-379-9119
Contact: Laura Pecoraro
[email protected]
blome.com
Bowers Industrial
3645 W. 1987 South
Salt Lake City, UT 84104
Phone: 800-892-5224
Contact: Kevin
[email protected]
bowersindustrial.com
Bridgeport Chemical
291 West McAllen
Sikeston, MO 63801
Phone: 573-472-9700
Contact: Rob Russell
[email protected]
bridgeportchemical.com
C
Canusa-CPS
25 Bethridge Rd.
Toronto, ON M9W 1M7 Canada
Phone: 416-744-5798
Contact: Bob Buchanan
[email protected]
canusa.com
Carboline Company
2150 Schuetz Rd.
St. Louis, MO 63146
Phone: 314-644-1000
Contact: Steve Harrison
[email protected]
carboline.com
See our display ads, inside front cover
and p. 136.
CCI Con-Tech of California, Inc.
2211 Navy Dr.
Stockton, CA 95206
Phone: 209-941-8324
Contact: Steven A. Williams
[email protected]
hydro-pox.com
Ceilcote
(International Paint LLC)
6001 Antoine Dr.
Houston, TX 77091
Phone: 800-589-1267
Contact: Sales Adminstration
[email protected]
international-pc.com
Celufibre Industries Inc.
14735–124 Ave.
Edmonton, AB T5L 3B2 Canada
Phone: 780-447-1255
Contact: Kevin Olsen
[email protected]
can-cell.com
Company Profiles
ChemCo Systems
2800 Bay Rd.
Redwood City, CA 94063
Phone: 800-757-6773
Contact: John Bors
[email protected]
chemcosystems.com
10600 N. Industrial Dr.
Mequon, WI 53092
Phone: 800-672-2622
Contact: Jeff Oleson
[email protected]
coppsindustries.com
408 Srishti Plaza
Mumbai, 400070 India
Phone: 91 9820024504
Contact: Mukul Gupta
chemtreatindia.com
101 Paragon Dr.
Montvale, NJ 07645
Phone: 201-949-6216
Contact: Jeffrey T. Spillane
[email protected]
insl-x.com
ChemMasters, Inc.
300 Edwards St.
Madison, OH 44057
Phone: 800-486-7866
Contact: John Fauth
[email protected]
chemmasters.net
Chugoku Marine Paints
Singapore Pte. Ltd.
No. 22 Tuas St.
Singapore, 638459 Singapore
Phone: 65 90665888
[email protected]
CIM Industries
23 Elm St.
Peterborough, NH 03458
Phone: 603-924-9481
Contact: Becky Tatro
[email protected]
cimindustries.com
Coatings For Industry, Inc.
319 Township Line Rd.
Souderton, PA 18964
Phone: 215-723-0919
Contact: Kevin Klotz
coatingsforindustry.com
Concrete Solutions™
Products by Rhino Linings
9151 Rehco Rd.
San Diego, CA 92121
Phone: 619-410-6020
Contact: Bart Sadleir
[email protected]
concretesolutions.com
ConShield Technologies
541 10th St., #233
Atlanta, GA 30318
Phone: 877-543-2094
Contact: Joe Cherry
[email protected]
conshield.com
PO Box 2860
Danville, CA 94526
Phone: 925-551-7796
Contact: Gerald Morris
[email protected]
chemproof.com
Corchem®
1227 South Murphy St.
Odessa, TX 79766
Phone: 432-332-1335
Contact: Daryl Bibens
[email protected]
corchem.com
Corroseal
6107 N Marine Dr.
Portland, OR 97203
Phone: 800-237-1573
Contact: Sue Steele
[email protected]
corroseal.com
7059 Barry St.
Rosemont, IL 60018
Phone: 847-298-7770
Contact: Hugh McVey
[email protected]
corroshield.com
Cortec Corporation
4119 White Bear Pkwy.
St. Paul, MN 55110
Phone: 651-429-1100
Contact: Cliff Cracauer
[email protected]
cortecvci.com
Cote-L Industries Inc.
1542 Jefferson St.
Teaneck, NJ 07666
Phone: 201-836-0733
Contact: Cy Fine
[email protected]
cotelind.com
9200 Latty Ave.
Saint Louis, MO 63042
Phone: 314-524-0191
Contact: Rod Jarboe
[email protected]
creativepolymersinc.com
3000 E. Harcourt St.
Rancho Dominguez, CA 90221
Phone: 310-886-9100
Contact: Jodi Hood
[email protected]
dexotex.com
20
D
Dampney Co., Inc.
85 Paris St.
Everett, MA 02149
Phone: 617-389-2805
Contact: Dennis Aikman
[email protected]
thurmalox.com
Denso North America
9747 Whithorn Dr.
Houston, TX 77095
Phone: 281-821-3355
Contact: Jesse Flores
[email protected]
densona.com
Devoe High Performance Coatings
6001 Antoine Dr.
Houston, TX 77091
Phone: 888-338-6347
Contact: Sales & Tech Support
[email protected]
1110 Albany Pl. SE
Orange City, IA 51041
Phone: 712-737-8880
Contact: Perry Foreman
[email protected]
diamondvogel.com
Dow Chemical Company
9008 Bldg.
Midland, MI 48642
Phone: 800-447-4369
Contact: Barb Gustafson
dow.com
Company Profiles
Dow Corning Corporation
PO Box 0994
Midland, MI 48686
Phone: 800-248-2481
[email protected]
dowcorning.com/coatings
Dudick, Inc.
1818 Miller Pkwy.
Streetsboro, OH 44241
Phone: 330-562-1970
Contact: Barb Fischer
[email protected]
dudick.com
Dunn-Edwards
4885 E. 52nd Pl.
Los Angeles, CA 90058
dunnedwards.com
Duraamen Engineered Products Inc.
116 West 23rd St.
New York, NY 10011
Phone: 212-386-7609
Contact: Victor Pachade
[email protected]
duraamen.com
E
Ellis Paint Company
3150 E. Pico Blvd.
Los Angeles, CA 90023
Contact: Karen Hollinhurst
[email protected]
ellispaint.com
Enecon Corporation
6 Platinum Crt.
Medford, NY 11763
Phone: 516-349-0022
Contact: Mike Tedesco
[email protected]
enecon.com
Enviroline
6001 Antoine Dr.
Houston, TX 77091
Phone: 800-589-1267
Contact: Sales Administration
[email protected]
Eoncoat LLC
4000 Airport Dr. NW
Wilson, NC 27896
Phone: 252-360-3110
Contact: Tony Collins
[email protected]
eoncoat.com
Epmar Corp.
13210 Barton Cl.
Whittier, CA 90605
Phone: 562-236-1170
Contact: Michael Soriano
epmar.com
ErgonArmor
PO Box 23028
Jackson, MS 39225
Phone: 877-982-7667
[email protected]
ergonarmor.com
19218 Redwood Rd.
Cleveland, OH 44110
Phone: 800-321-7628
Contact: Technical Support
[email protected]
euclidchemical.com
Evonik Industries
299 Jefferson Rd.
Parsippany, NJ 07054
Phone: 973-929-8522
Contact: Christopher Soldi
[email protected]
protectosil.com
Company Profiles
21
F
Fabick Protective Coatings
4118 Robertson Rd.
Madison, WI 53714
Phone: 608-242-1100
Contact: Brad Gabrielse
[email protected]
fabick.com
Farwest Corrosion Control Company
1480 W. Artesia Blvd.
Gardena, CA 90248
Phone: 310-532-9314
Contact: Marnie Rankin
[email protected]
farwestcorrosion.com
Flame Control Coatings, LLC
4120 Hyde Park Blvd.
Niagara Falls, NY 14305
Phone: 716-282-1399
Contact: Jim Raby
[email protected]
flamecontrol.com
Flame Seal Products, Inc.
15200 West Dr.
Houston, TX 77053
Phone: 713-668-4291
Contact: Terri Kiser
[email protected]
flameseal.com
Flexi-Liner Corp.
3198 Factory Dr.
Pomona, CA 91768
Phone: 800-423-4909
Contact: Kyle Foutz
[email protected]
flexi-liner.com
Florock, Crawford Labs, Inc.
4165 S. Emerald Ave.
Chicago, IL 60609
Phone: 800-356-7625
[email protected]
florock.net
FSC Coatings Inc.
5360 Eastgate Mall Rd., Ste. F
San Diego, CA 92121
Phone: 800-579-8459
Contact: Steve Cerenzie
[email protected]
fsccoatings.com
40 Boroline Rd.
Allendale, NJ 07401
Phone: 877-770-7446
Contact: Charles Fisher
[email protected]
fujifilmsmartsurfaces.com
Fusion UV Systems
910 Clopper Rd.
Gaithersburg, MD 20878
Phone: 301-527-2660
Contact: Kevin Joesel
[email protected]
fusionuv.com
G
Gelest, Inc.
11 E. Steel Rd.
Morrisville, PA 19067
Phone: 215-547-1015
Contact: Gabrielle Horvath
[email protected]
gelest.com
1787 Drew Rd.
Mississauga, ON L5S 1J5 Canada
Phone: 888-443-6483
Contact: Igor Nikolajev
[email protected]
gemite.com
PO Box 2205
Antioch, CA 94531
Phone: 925-473-9250
Contact: Scott Hobbs
[email protected]
getcoatings.com
Groco Specialty Coatings
10818 C.F. Hawn Frwy.
Dallas, TX 75217
Phone: 972-286-7890
Contact: Bob Guenther
[email protected]
grocosc.com
30075 County Rd. 49
Loxley, AL 36551
Phone: 251-964-7911
Contact: John R. Theis
[email protected]
gulfcoastpaint.com
H
hci chemtech, inc.
310 S. Bellis St.
Wausau, WI 54403
Phone: 800-596-6282
Contact: Cheryl Barton
[email protected]
hciinfo.com
Hempel (USA) Inc.
600 Conroe Park North Dr.
Conroe, TX 77303
Phone: 936-523-6000
Contact: Malcolm Kerr
[email protected]
hempel.us
See our display ads, pp. 46 and 94.
Hempel Denmark
Lundtoftevej 150
DK-2800 Kgs. Lyngby
Phone: 45 4593 3800
[email protected]
www.hempel.dk
See our display ads, pp.76 and 100.
822 South 14th St.
Manitowoc, WI 54220
Phone: 920-684-6646
Contact: Doug Schmidt
[email protected]
heresite.com
465 Industrial Park Dr., PO Box 3564
Boone, NC 28607
Phone: 828-265-2513
Contact: Sales
[email protected]
highland-international.com
Hi-Temp Coatings Technology
PO Box 2347
Acton, MA 01720
Phone: 978-635-1110
Contact: Mike MeLampy
[email protected]
hitempcoatings.com
2440 West Majestic Park Way
Tucson, AZ 85705
Phone: 520-322-0010
Contact: John Huedepohl
[email protected]
hj3.com
Huntsman Polyurethanes
2190 Executive Hills Blvd.
Auburn Hills, MI 48326
Phone: 248-322-7431
Contact: Kevin A. Buck
[email protected]
huntsman.com/pu/ace
Hydrex Underwater Technology
604 Druid Rd. E.
Clearwater, FL 33756
Phone: 727-443-3900
Contact: George Aristizabal
[email protected]
ecospeed.us
I
3333 R. Arrington Jr. Blvd. N.
Birmingham, AL 35234
Phone: 800-324-9584
Contact: Jeff White
[email protected]
induron.com
1925 Trade Center Way, Ste. 1
Naples, FL 34109
Phone: 800-767-3998
Contact: Francesca Crolley
[email protected]
nansulate.com
44648 Mound Rd., Ste. 104
Sterling Heights, MI 48317
Phone: 877-552-6724
Contact: Anthony Miriani
[email protected]
sprayrubber.com
Insulating Coatings Corporation
27 Link Dr., Ste. D
Binghamton, NY 13904
Phone: 800-223-8494
Contact: Rick Thomas
[email protected]
whyreplace.com
Company Profiles
22
2925 Lucy Ln.
Franklin Park, IL 60131
Phone: 800-624-8919
Contact: Angel Llanes
[email protected]
internationalcoatings.com
6001 Antoine Dr.
Houston, TX 77091
Phone: 800-589-1267
Contact: Sales Adminstration
[email protected]
Isolatek International
41 Furnace St.
Stanhope, NJ 07874
Phone: 800-631-9600
Contact: Sean Canfield
[email protected]
isolatek.com
6614 Gant Rd.
Houston, TX 77066
Phone: 281-397-0033
Contact: Alan Kaniss
[email protected]
astantislip.com
ITW Devcon
30 Endicott St.
Danvers, MA 01923
Phone: 800-933-8266
Contact: Jessica Desrochers
[email protected]
devcon.com
6614 Gant Rd.
Houston, TX 77066
Phone: 281-397-0033
Contact: Alan Kaniss
[email protected]
futuracoatings.com
J
Jotun Paints Inc.
9203 Hwy. 23
Belle Chasse, LA 70037
Phone: 504-394-3538
Contact: Sales
jotun.com/us
Unit 904–60 Wyndham St. S
Guelph, ON N1E 7H7 Canada
Phone: 519-826-9374
Contact: Mark Gibson
[email protected]
4pipelines.com
Kemper System America, Inc.
1 Reuten Dr.
Closter, NJ 07624
Phone: 800-541-5455
Contact: Diana Nino-Tables
[email protected]
kempersystem.net
Key Resin Company
4050 Clough Woods Dr.
Batavia, OH 45103
Phone: 888-943-4532
Contact: Eric Borglum
[email protected]
keyresin.com
Jotun Powder Coatings
PO Box 2130, Stubberod
3255 Larvik, 3255 Norway
Phone: 47 33 16 40 00
Contact: Fredrik Barth-Nilsen
[email protected]
K
3811 Curtis Ave.
Baltimore, MD 21226
Phone: 800-637-6372
Contact: Alex Kaufman
[email protected]
kaufmanproducts.net
4018 Trey Dr.
Houston, TX 77084
Phone: 281-550-1199
Contact: Owen T. Priest
[email protected]
kcccontrol.com
1645 East Kent Ave.
Vancouver, BC V5P 2S8 Canada
Phone: 604-324-8280
Contact: Isabella Germinario
[email protected]
kryton.com
L
Lonza Microbial Control
5660 New Northside Dr., Ste. 1100
Atlanta, GA 30328
Phone: 800-523-7391
[email protected]
lonza.com
RUST NEVER
SLEEPS!
INCREASE
PROFITS !
Vacuum TO 6,000
CFM diesel / electric
(877) 529-2124
www.rapidprep.com
Blast & Recovery Systems all sizes
60 ton eight outlet
blasters
Shipyard
vacs & dc’s
Rapid Prep Service Center Locations: Johnston, RI - Chesapeake, VA
Chula Vista, CA - Lakewood, WA
DH / AC Units
Dust Collectors to 80,000
CFM
Company Profiles
23
M
Mad Dog Primer
309 Plum St. N
Northfield, MN 55057
Phone: 507-645-7431
Contact: Steve Ryan
[email protected]
maddogprimer.com
Madison Chemical Industries
490 McGeachie Dr.
Milton, ON L9T 3Y5 Canada
Phone: 905-878-8863
Contact: Kim Bruce
[email protected]
madisonchemical.com
Mascoat
4310 Campbell Rd.
Houston, TX 77041
Phone: 713-465-0304
Contact: Chad Davis
[email protected]
mascoat.com
Micor Company, Inc.
3232 N. 31st St.
Milwaukee, WI 53216
Phone: 800-284-4308
Contact: Bill Siefert
[email protected]
micorco.com
N
9 Guttman Ave.
Charleroi, PA 15022
Phone: 724-483-9300
Contact: Erica Corrick
[email protected]
nationalpolymers.com
Nationwide Chemical
Coating Mfrs., Inc.
7106 24th Crt. East
Sarasota, FL 34243
Phone: 800-423-7264
Contact: Sales
[email protected]
nationwidecoatings.com
Navcor
4150 112th Terr. N., Bldg. A
Clearwater, FL 33762
Phone: 727-299-9090
Contact: Steve Kearns
[email protected]
navcor.us
NCFI Polyurethanes
PO Box 1528
Mt. Airy, NC 27030
Phone: 800-246-8229
[email protected]
enduratechsystems.com
NIC Industries
7050 6th St.
White City, OR 97503
Phone: 541-826-1922
Contact: Jeff Scheid
[email protected]
nicindustries.com
The Platt Brothers & Company
PO Box 1030
Waterbury, CT 06721
Phone: 203-753-4194
Contact: David Berardinelli
plattbros.com
429 Tiogue Ave.
Coventry, RI 02816
Phone: 401-821-2121
Contact: Rick Bernard
[email protected]
northerncoatings.com
Polycoat Products
14722 Spring Ave.
Santa Fe Springs, CA 90670
Phone: 562-802-8834
Contact: Joe Nichy
[email protected]
polycoatusa.com
NoFire Technologies, Inc.
5 James St.
South Hackensack, NJ 07606
Phone: 201-818-1616
Contact: Al Margino
[email protected]
nofire.com
Nox-Crete Products Group
1444 S. 20th St.
Omaha, NE 68108
Phone: 402-341-2080
[email protected]
nox-crete.com
PO Box 4690
Pinehurst, NC 28374
Phone: 910-235-0468
Contact: Larry Harrison
[email protected]
nsp-specialty.com
Nukote Arabia
Prince Thamer St., Cross 25
Al Khobar, 31952 Saudi Arabia
Phone: 966 3 8677004
Contact: Abdul Wahab
[email protected]
Nutech Paint LLC
104 North Smith St., Units 103, 104
Corona, CA 92880
Phone: 714-557-4180
Contact: Robert Dixon
[email protected]
nutechpaints.com
P
Pacific Polymers
(A Division of ITW)
12271 Monarch St.
Garden Grove, CA 92841
Phone: 714-793-1988
Contact: Michael Claus
[email protected]
pacpoly.com
Para Paints
11 Kenview Blvd.
Brampton, ON L6T 5G5 Canada
Phone: 905-792-0940
Contact: Garry Belfall
[email protected]
para.com
6700 F.M. 802
Brownsville, TX 78526
Phone: 956-831-7818
Contact: Klaus D. Meyer
[email protected]
polibrid.com
Polycorp Ltd.
33 York St.
Elora, ON N0B 1S0 Canada
Phone: 519-846-2075
Contact: Dennis Nolan
[email protected]
poly-corp.com
Polymax/Milamar Coatings L.L.C.
311 NW 122nd St., Ste. 100
Phone: 405-755-8454
Contact: Joanne Kontorchik
[email protected]
polymax-us.com
PPC Coatings (MTR)
2 Pixie Rd.
Wilmington, DE 19810
Phone: 877-588-2227
Contact: Cliff Narunsky
[email protected]
ppccoatings.com
One PPG Pl.
Phone: 888-977-4762
Contact: Steve Feldman
[email protected]
ppgpmc.com
Premier Coating Systems Inc.
606 N. Lane Ave., #6
Jacksonville, FL 32254
Phone: 904-403-6113
Contact: Ron Fake
[email protected]
Prime Resins
2291 Plunkett Rd.
Conyers, GA 30012
Phone: 800-321-7212
Contact: Adam Goldstone
[email protected]
primeresins.com
Company Profiles
24
Protective Floorings and Linings
a Division of Milamar Coatings LLC
311 NW 122nd St., Ste. 100
Phone: 405-755-8454
Contact: Joanne Kontorchik
[email protected]
protective-floorings.com
Protecto Wrap Company
1955 Cherokee St.
Denver, CO 80223
Phone: 800-759-9727
[email protected]
protectowrap.com
Protek Paint Ltd.
335 Horner Ave.
Toronto, ON M8W 1Z6 Canada
Phone: 800-773-5233
Contact: Barry Affleck
[email protected]
texturline.com
Q
Quest Construction Products
(HydroStop/United Coatings)
1465 Pipefitter St.
N Charleston, SC 29405
Phone: 800-739-5566
[email protected]
quest-cp.com
R
Raven Lining Systems
13105 East 61st St., Ste. A
Broken Arrow, OK 74012
Phone: 800-324-2810
Contact: Jim Henke
[email protected]
ravenlining.com
1500 Industrial Blvd.
Madison, GA 30650
Phone: 440-781-6226
Contact: Larry Hess
[email protected]
rematiptop.com
Republic Powdered Metals, Inc.
2628 Pearl Rd.
Medina, OH 44256
Phone: 800-551-7081
Contact: Paula Coombes
[email protected]
rpmrepublic.com
9151 Rehco Rd.
San Diego, CA 92121
Phone: 800-422-2603
Contact: John Henningsen
[email protected]
rhinoliningsindustrial.com
6107 N. Marine Dr.
Portland, OR 97203
Phone: 503-572-8201
Contact: Tom Selby
[email protected]
roddapaint.com
RoofMart International Inc.
2735 Rain Rd., PO Box 502
Chapman, KS 67431
Phone: 800-345-1439
[email protected]
roofrmi.com
Roval USA Corp.
12270 NW Luoto Ln.
Carlton, OR 97111
Phone: 971-237-0958
Contact: Aldo Donnaloia
[email protected]
roval-usa.com
Rust Bullet, LLC
300 Brinkby Ave., Ste. 200
Reno, NV 89509
Phone: 775-829-5606
Contact: Kathline A. Spring
[email protected]
rustbullet.com
S
Safe Encasement Systems
1795 N. Snow Canyon Pkwy., Unit 63
St. George, UT 84770
Phone: 888-277-8834
Contact: John Thoburn
[email protected]
safeencasement.com
Sauereisen, Inc.
160 Gamma Dr.
Phone: 412-963-0303
Contact: Lake Barrett
[email protected]
sauereisen.com
Seacoat Technology
11215 Jones Rd. W., Ste. H
Houston, TX 77065
Phone: 832-237-4400
Contact: John Bowlin
[email protected]
seacoat.com
Seal For Life Industries,
Part of Berry Plastics
Engineered Materials Division
Gasselterstraat 20
Stadskanaal, 9503JB Netherlands
Phone: 31 599696170
Contact: J.F. Doddema
[email protected]
stopaq.com
Overspray Problems? We Have the Solution!
800-835-5858
www.sprayclaims.com
DAMAGE CONTROL: Costs are lowered, as much as 75%, through our fast,
professional on-site overspray removal service.
COMPETITIVE PRICING: No charges, other than those for cleaning vehicles.
Experience: Forty-four years of experience in removing: paint, epoxies, urethanes,
roofing foam, asphalt, tar, concrete, industrial fallout, and most other
contaminants, from all types of vehicles, boats, and aircraft.
STATE-OF-THE ART TECHNOLOGY: Our unique rubber pad eraser eliminates
the use of: solvents, razor blades, buffing machines, sandpaper, rubbing
compounds, and clay products.
IMMEDIATE ACTION: Skilled and uniformed technicians are quickly mobilized
to any overspray claim site in the nation.
COMPLETE DOCUMENTATION: Signed pre-inspection forms and releases from
satisfied claimants, that limit liability issues, along with vehicle photos.
Company Profiles
25
Shalimar Paints Limited
Oberoi Garden Estate, C Wing, 5th Fl.
Mumbai, 400 072 India
Phone: 91 22 2857 7591
Contact: P. Hari Kumar
[email protected]
shalimarpaints.com
ShawCor CSI Services
1607–10 St.
Nisku, AB T9E 0A7 Canada
Phone: 403-218-8262
Contact: Sam Miller
[email protected]
shawcorcsi.com
Sherwin-Williams
101 Prospect Ave. NW
Cleveland, OH 44115
Phone: 800-524-5979
[email protected]
sherwin-williams.com/protective
3100 Falls Cliff Rd.
Baltimore, MD 21211
Phone: 410-243-8856
Contact: Edye Fox Abrams
[email protected]
foxind.com
2410 104th St., Crt. S, Ste. D
Lakewood, WA 98499
Phone: 253-588-7101
Contact: Cliff Haskins
[email protected]
specialty-products.com
SpectraShield Liner Systems
4527 Sunbeam Rd.
Jacksonville, FL 32257
Phone: 904-419-4889
Contact: Bob Klopfenstein
[email protected]
spectrashield.com
5781 Pleasant Valley Rd.
El Dorado, CA 95623
Phone: 530-344-9000
Contact: Doug Standal
[email protected]
speedcove.com
Union Bank, King St.
Knutsford, Cheshire, WA16 6EF UK
Phone: 44 1565 633111
Contact: Dave Mulligan
[email protected]
stirlinglloyd.com
Sub-One Technology
4464 Willow Rd., Bldg. 103
Pleasanton, CA 94588
Phone: 925-924-1020
Contact: Dore Rosenblum
[email protected]
sub-one.com
Haven 29–Noorderlaan 9
Antwerp, 2030 Belgium
Phone: 32 3 213 53 18
Contact: Manuel Hof
[email protected]
ecospeed.be
Sulzer Metco
1101 Prospect Ave.
Westbury, NY 11590
Phone: 800-638-2699
[email protected]
sulzermetco.com
Directories on Demand
• Fully searchable
• Share via Facebook, Twitter,
LinkedIn and email
• Find listings instantly by industry,
exposure, substrate, company or
product trade name
jpcl
PAINTSQUARE.COM
Visit www.paintsquare.com/bg/
or
Scan this QR code for immediate access!
Company Profiles
26
Sumter Coatings Inc.
2410 Hwy. 15 South
Sumter, SC 29154
Phone: 803-481-3400
Contact: Jimmy Reynolds
[email protected]
sumtercoatings.com
Superior Products
10835 W 78th St.
Shawnee, KS 66214
Phone: 832-683-1123
Contact: Hal McElroy
[email protected]
spicoatings.com
T
8150 Rue de L’Industrie
Montreal, QC H1J 1S7 Canada
Phone: 888-279-5497
Contact: Craig Ballinger
[email protected]
termarust.com
See our display ad, p.39.
Tesla NanoCoatings Ltd.
6200 Frank Ave. NW
Massillon, OH 44720
Phone: 330-880-5229
Contact: Todd Hawkins
[email protected]
teslanano.com
Textured Coatings of America
2422 E. 15th St.
Panama City, FL 32405
Phone: 800-454-0340
Contact: Regina Price
[email protected]
texcote.com
Thermion
PO Box 780
Silverdale, WA 98383
Phone: 877-884-3428
Contact: Dean Hooks
[email protected]
thermioninc.com
5211 Brookglen Dr., Ste. A
Houston, TX 77017
Phone: 713-910-6200
Contact: Jeff Longmore
[email protected]
thinfilmtech.net
3L&T Inc.
897 Independence Ave., Ste.1B
Mountain View, CA 94043
Phone: 650-625-0177
Contact: Linas Mazeika
[email protected]
3l-t.com
3M Infrastructure Protection Division
6801 River Pl. Blvd., 147-4N-01
Austin, TX 78726
Phone: 512-984-7801
Contact: Michelle Latham
[email protected]
3m.com/corrosion
TIB Chemicals AG
Muelheimer Str. 16-22
Mannheim, D-68219 Germany
Phone: 49 621 8901 812
Contact: Rainer Kuprion
[email protected]
tib-chemicals.com
TMS Metalizing Systems, Ltd.
7665 NW Eldorado Blvd.
Bremerton, WA 98312
Phone: 360-692-6656
Contact: Dave Wixson
[email protected]
tmsmetalizing.com
6800 Corporate Dr.
Kansas City, MO 64120
Phone: 816-483-3400
Contact: Marketing
[email protected]
tnemec.com
TPR2 Corporation
36 Plains Rd.
Essex, CT 06426
Phone: 860-767-8772
Contact: Brian Flaherty
[email protected]
tpr2.com
U
U.S. Coatings, LLC
PO Box 220313
St. Louis, MO 63122
Phone: 314-205-1500
Contact: Larry LeSeure
[email protected]
uscoatings.com
U.S. Industrial Coatings
PO Box 3200
Framingham, MA 01705
Phone: 508-980-1000
Contact: Ken
usindustrialcoatings.com
United Gilsonite Laboratories
1396 Jefferson Ave.
Dunmore, PA 18509
Phone: 800-845-5227
Contact: William Tucker
[email protected]
ugl.com
V
VersaFlex Incorporated
686 S. Adams St.
Kansas City, KS 66105
Phone: 913-321-9000
Contact: Sales
[email protected]
versaflex.com
W
W.R. Meadows
300 Industrial Dr.
Hampshire, IL 60140
Phone: 800-342-5976
Contact: W. R. Meadows
Walla Walla Environmental
4 West Rees Ave.
Walla Walla, WA 99362
Phone: 509-522-0496
Contact: Jamie Dressler
[email protected]
wwenvironmental.com
Wasser Corporation
4118 B Pl. NW, Ste. B
Auburn, WA 98001
Phone: 800-627-2968
Contact: Kevin Grillo
[email protected]
wassercoatings.com
325 Paul Ave.
St. Louis, MO 63135
Phone: 314-521-2000
Contact: Paul Powers
[email protected]
watsoncoatings.com
Wilko Paint, Inc.
2727 Ohio
Wichita, KS 67219
Phone: 800-658-3799
Contact: Don Holt
[email protected]
wilkopaintinc.com
1075 Arrowsmith St.
Eugene, OR 97402
Phone: 541-484-9621
Contact: Gary Williams
[email protected]
polyquik.com
z
ZRC Worldwide
145 Enterprise Dr.
Marshfield, MA 02050
Phone: 800-831-3275
Contact: Lorraine DeWald
[email protected]
zrcworldwide.com

power plant coating systems: selecting and sourcing

Transcription

Similar documents

Foaming at the Mouth - Avila Sign and Design

7357268 Nufloors Dec 31.indd

Print Details - Manatee Pocket Yacht Sales

Kleer Koat Table Top Epoxy MSDS

Instructions - Wildman Rocketry

THE WORLD OF WILDMAN 3!........

case study jordan commons

"Restoring Failing Pipe Systems Is a Win-Win