PRODUCT CATALOG

Transcription

PRODUCT CATALOG

FIREMAN GARMENTS & FIRE PROXIMITY SUITS
EMERGENCY SHOWERS AND EYE-WASH FOUNTAINS
SAFETY CANS
PRODUCT
CATALOG
Co. LTD.
[email protected]
FIREMAN GARMENTS & FIRE PROXIMITY SUITS
FYRPRO®, FYRAL®, FYRTEX®
TECHNICAL INFORMATION ABOUT OUR PRODUCTIVE GARMENTS
FYRPRO® Series
FYRPRO® series fireman garments are manufactured as per EN 469:2005 standard and certified as per 89/686/
EEC - PPE as a requirement of European Regulations.
What is the meaning of X, Y, Z and Level 1, Level 2 Protection Levels?
Two different performance levels are described in EN 469:2005 standard; level 1 and level 2. Level 2 garments
provide higher protection than level 1 garments. Garments should be marked according to their performance
levels. For example X2, Y2, Z2 indicates level 2 garment or X2, Y2, Z1 indicates level 1 garment.
X defines the heat transfer level for flame and radiation.
Y defines the water penetration level.
Z defines water vapor resistance level.
Following table shows related test methods and requirements for level 1 and level 2.
TESTS
TEST METHOD
HEAT TRANSFER-FLAME
EN 367
HTI24≥ 9 s
HTI24-HTI12≥ 3s
HEAT TRANSFER-RADIATION
EN 6942
RESISTANCE TO WATER
PENETRATION
WATER VAPOUR
RESISTANCE
Level 1
PERFORMANCE LEVELS
Marking
Level 2
Marking
Xf1
HTI24≥ 13 s
HTI24-HTI12≥ 4s
Xf2
RHTI24≥ 10 s
RHTI24-RHTI12 ≥ 3 s
Xr1
RHTI24≥ 18 s
RHTI24-RHTI12 ≥ 4s
Xr2
EN 20811
Level 1 < 20 kPa
Y1
Level 2 ≥ 20 kPa
Y2
EN 31092
Level 1 > 30 m2Pa/W
Z1
Level 2 ≤ 30 m2Pa/W
Z2
OUTER LAYERS: HEAT PROTECTIVE FC - FLUOROCARBON FINISHED
WATER REPELLENT OUTER LAYERS
NOMEX® OUTERSHELL TOUGH, PBI® KEVLAR®, NOMEX® ADVANCE
MOISTURE BARRIERS: THE BREATHABLE MOISTURE BARRIERS GIVES
PENETRATION RESISTANCE AGAINST TO WATER OR OTHER LIQUIDS.
100% ARAMID OR ARAMID - MELAMIN MIXTURE + PU MEMBRANE
HEAT BARRIERS: THE HEAT BARRIERS PROVIDE THERMAL ISOLATION
100% ARAMID OR ARAMID - MELAMIN MIXTURE.
INNER LAYER: THE INNER LAYER PROVIDES COMFORT.
NOMEX® COMFORT, NOMEX® VISCOSE
FYRAL® Series
FYRAL® Series garments are professional technical garment that are need to be used by trained individuals.
They are used in different fire fighting techniques other than special designed FYRPRO® series. Employee
must decide which firefighting garment should be used after the risk analysis in case of fire.
FYRAL® series garments are manufactured as per EN 1486:2007 and certified as per 89/686/EEC – PPE.
FYRAL® series garments which have this standard are used with self contained breathing apparatus and aims
the protection of the user from the heat stress by reflecting radiant heat.
For this reason, special aluminized fabric is used in the outer layer which has pre property of reflecting the
radiant heat.
Garments are formed with 3 or 4 main layers. Moisture Barrier can be added according to area of use.
• Outer layer (Fire resistant fabric which is resistant against heat and mechanical effects, water repellent)
• Heat Barrier (double or single layered , generally non-woven fire resistant layer)
• Inner Liner (quilted on heat barrier, low weight fire resistant fabric)
FYRTEX® Series
Our company has also been developing Industrial Heat and Flame Protection Garments which are widely
used in Industry. These garments are generally produced under the brandname of FYRTEX® in the conformity
of European standards such as EN ISO 11612, EN 1149-5 (EN 1149-3 & EN 1149-1).
Garments certified against EN 11612 standard, are categorized according to below performance levels.
A: EN ISO 15025 - Limited flame spread (from 1 to 2)
B: ISO 9151 - Convective heat (from 1 to 3)
C: EN ISO 6942 - Radiant heat (from 1 to 4)
D: ISO 9185 - Molten Aluminium splash (from 1 to 3)
E: ISO 9185 - Molten Iron splash (from 1 to 3)
F: ISO 12127 - Contact heat (from 1 to 3)
Some of them are specialized for using against particular dangers e.g. Electrical arc Protection (EN 61482-1-2
& EN ISO 11612) , Molten Metal Splash Protection, Wildland Fires, antiflash hoods.
Electric arc garments certified against EN 61482 standard, are categorized Class 1 (tested against 4 kA) and
Class 2 (tested against 7 kA) . Class 2 is the highest level that can be reached in order to enable protection
against electric arc.
All of our products in our protective clothing division have been certified as per related harmonized standards,
CE marked and certified in accordance with 89 / 686 EEC PPE Directive.
FIRE FIGHTING GARMENTS
FYRPRO® SERIES GARMENTS
FYRPRO® 430-G, FYRPRO® 430 FIRE FIGHTING GARMENTS
FYRPRO® 440 FIRE FIGHTING GARMENTS
P/N: 13141044 Overall
P/N: 13152344
P/N: 13141144 Garment
Produced in accordance with EN 469:2005 standard. According to
the Personal Protective Equipment Directive 89/686/EEC it has EC
Type Examination Certificate.
Fyrpro® 440 has CE symbol and wheelmark in accordance with
Marine Equipment Directive 96/98/EC-MED.
Marked.
Marked.
Xf2, Xr2, Y2, Z2
Xf2, Xr2, Y2, Z2
Layer system
Outer layer
:
Moisture barrier :
Heat barrier
:
Inner layer
:
Design:
Reflective:
Zippers:
Cuff:
Pockets:
Wheelmarked, MED certificated.
PBI® GOLD (58% KEVLAR®, 40% PBI®
2% Beltron®), rip-stop
Aramid/Melamin + PU membrane
Aramid/Melamin nonwoven
(50:50)% Aramid/Viscose FR
Jacket + Pants, Coveralls
75 mm yellow-grey-yellow
Metal teeth, non-flammable,
quick release zipper
Metaaramid knitted interlock fabric
Two covered pocket on each side of jacket and radio pocket on left breast
Layer system
Outer layer
: NOMEX® Outershell Tough (75% NOMEX®,
23% KEVLAR® 2% P 140)
Moisture barrier : FR Knitted Fabric + PU membrane
Heat barrier
: 100% Aramid nonwoven
Inner layer
: (50:50)% Aramid/Viscose FR
Design: Jacket + Pants
Reflective: 50 mm yellow-grey-yellow
Zippers: Metal teeth, quick release zipper
Cuff: Metaaramid knitted interlock fabric
Pockets: Two covered pockets on eachside of jacket and radio pocket on left breast.
NOMEX® and KEVLAR® are the registered trademarks of DuPont.
PBI GOLD® is the registered trademarks of PBI Performance Products, Inc.
4
FYRPRO® SERIES FIREMAN GARMENTS
P/N : 13112355
P/N : 13118444
FYRPRO® 453 Series Fire Protection Garments are produced
according to EN 469: 2005 standard. Our products have been CE
marked and certified in accordance with 89/686/EEC PPE Directive.
FYRPRO® 510 Series Fire Protection Garments are produced
according to EN 469:2005 standard. Our products are marked and
certified in accordance with 89/868/EEC Directive.
Marked.
Marked.
Xf2, Xr2, Y2, Z2
Xf2, Xr2, Y2, Z2
Layer System
Layer system
Outer layer
:75% Metaaramid, 23% Paraaramid,
2% Antistatic, rip-stop
Moisture barrier :Aramid/Melamin + PU membrane
Heat barrier
:Aramid/Melamin nonwoven (two layers)
Inner layer
:93% Metaaramid + 5% Paraaramid +
2% Antistatic fibre
Design:Jacket + Pants
Reflective:50-75 mm red-grey-red
Zippers:Aramid zipper with metallic teeht,quick release zipper
Wrist bands
:Metaaramid fabric
Pockets:Radio pocket on the left breast and two covered pockets on each side.
Outer layer
: NOMEX® ADVANCE (40% NOMEX®,
60% KEVLAR®), rip-stop
Moisture barrier : SONTARA® FR 89/52.
Heat barrier
: Aramid/Melamin nonwoven
Inner layer
: Aramid/Viscose FR (50:50)%
Cuff: Metaaramid knitted interlock fabric
Reflective: 75 mm yellow-grey-yellow, flame retardant
Zippers: Aramid zipper with Brass teeth
Pockets: Two covered pockets on each side of jacket and radio pocket on left breast.
Lower part of
the trouser leg : Zippers which are openable and closeable.
NOMEX®, KEVLAR® and SONTARA® are registered trademarks of DuPont.
www.ist.com.tr
5
FYRPRO ® 442 FIRE FIGHTING GARMENTS
FYRPRO ® 431-G, FYRPRO ® 431-C FIRE FIGHTING GARMENTS
P/N: 13112244
P/N: 13141040 Overall
P/N: 13141544 Garment
Produced in accordance with EN 469:2005 standard. According to the
Personal Protective Equipment Directive 89/686/EEC it has EC Type
Examination Certificate.
Marked.
Marked.
Xf2, Xr2, Y2, Z1
Xf2, Xr2, Y2, Z2
Layer system
Layer system
Outer layer
:
Moisture barrier :
Heat barrier
:
Inner layer
:
Design:
Reflective:
Zippers:
Cuff:
Pockets:
Produced in accordance with EN 469:2005 standard. According to the
Personal Protective Equipment Directive 89/686/EEC it has EC Type
75% Metaaramid, 23% Paraaramid,
2% Antistatic
Knitted fabric/PU membrane
100% Aramid nonwoven
(50:50)% Aramid/Viscose FR
Jacket + Pants
50 mm yellow-grey-yellow
Metal teeth, quick release zipper
Metaaramid knitted interlock fabric
Two covered pocket on each side of jacket and radio pocket on left breast.
Outer layer
:PBI GOLD PLUS® (60% KEVLAR®, 40% PBI®), rip-stop
Heat barrier
:Aramid/Melamin nonwoven
Inner layer
:(50:50)% Aramid/Viscose FR
Design:Jacket + Pants, Coverall
Cuff:Metaaramid knitted interlock fabric
Reflective:75 mm yellow-grey-yellow aramid
Zippers:Non-flammable, quick release
Pockets:Two covered pockets on each side of jacket and radio pocket on left breast.
PBI GOLD PLUS® is the registered trademarks of PBI Performance Products, Inc.
KEVLAR® is registered trademark of DuPont.
6
FYRPRO ® 450-S FIRE FIGHTING GARMENTS
P/N: 13172355
Produced in accordance with EN 469:2005 standard. According to the Personal Protective
Equipment Directive 89/686/EEC it has EC Type Examination Certificate.
Marked.
Xf2, Xr2, Y2, Z2
Layer system
Outer layer
: NOMEX® Outershell Tough (75% NOMEX®, 23% KEVLAR®, 2% P140), rip-stop
Heat barrier
:100% Aramid nonwoven
Inner layer
:NOMEX® COMFORT (93% NOMEX®, 5% KEVLAR®, 2% ANTISTATIC)
Design:Jacket + Pants
Reflective:50-75 mm red-grey-red
Zippers:Non-flammable, quick release
Cuff:Metaaramid knitted interlock fabric
Pockets:Radio pocket on the left breast and two covered pockets on each side.
www.ist.com.tr
7
FIRE PROXIMITY GARMENTS
FYRAL® SERIES GARMENTS
FYRAL® 5100 - FYRAL® 5300
ALUMINIZED FIRE PROXIMITY GARMENTS
FYRAL® 6100 - FYRAL® 6300
ALUMINIZED FIRE PROXIMITY GARMENTS
P/N : 13303555 – FYRAL® 5100 Jacket - Pants
P/N: 13305555 - FYRAL® 6100 Jacket-Pants
P/N : 13306555 – FYRAL® 5300 Overall
P/N: 13305655 - FYRAL® 6300 Overall
Marked.
Marked.
Layer System
Outer Layer
Heat Barrier
Inner Lining
Layer System
: Aluminized Satin Glass Fiber
: Aramid/Melamin nonwoven (3 layers)
: NOMEX® III A (93% Metaaramid +
5% Paraaramid + 2% Antistatic fibre)
Outer Layer
Moisture Barrier
Heat Barrier
Inner Lining
Design:
•
•
•
•
•
•
•
Hood with visor
Jacket with expanded back for breathing apparatus
Fire proof closure elements are located on front of the jacket.
Trousers
Firefighter’s boots with aluminized covers (made with clothing system)
Five finger aluminized gloves (made with clothing layer system)
Carrying bag
Aluminized Paraaramid
Aramid/Melamin + PU Membrane
Aramid/Melamin nonwoven (2 layers)
NOMEX® III A (93% Metaaramid +
5% Paraaramid + 2% Antistatic fibre)
Design:
• Hood with visor
• Jacket with expanded back for breathing apparatus
• Fire proof closure elements are located on front of the jacket.
• Trousers
• Firefighter’s boots with aluminized covers (made with clothing system)
• Five finger aluminized gloves (made with clothing layer system)
• Carrying bag
NOMEX® is the registered trademark of DuPONT.
8
:
:
:
:
FIRE PROXIMITY GARMENTS
FYRAL® SERIES GARMENTS
FYRAL® 1000 P MB / FYRAL® 2000 P MB
FIRE PROXIMITY SUIT
FYRAL® 1000 / FYRAL® 2000
FIRE PROXIMITY SUIT
P/N : 13303144 - FYRAL 1000 PMB
P/N : 13303033 - FYRAL 1000
P/N : 13302644 – FYRAL 2000 PMB
P/N : 13302533 - FYRAL 2000
P/N : 13303133 – FYRAL 1000 P
P/N : 13302633 – FYRAL 2000 P
Produced in accordance with EN 1486 standard. According to Personel
Protective Equipment Directive 89/686/EEC, it has EC Type Examination
certificate.
Produced in accordance with EN 1486 standard. According to
Personel Protective Equipment Directive 89/686/EEC, it has EC
Type Examination certificate.
Marked.
Marked.
TYPE 3
TYPE 3
Layer System
Layer System
Outer Layer
Moisture barrier
Heat barrier
Inner layer : Aluminized Paraaramid
: Aramid/Melamin + PU membrane (for PMB models)
: 100% Aramid Felt (3 layers)
: Aramid / Viscose FR (50:50)%
Design
• Hood with visor
• Trousers
• Carrying bag
Outer Layer : Aluminized Glass fiber
Heat barrier : 100% Aramid Felt (2 layers)
Inner layer : Cotton FR 100%
Design
• Hood with visor
• Trousers
• Carrying bag
www.ist.com.tr
9
PROTECTIVE INDUSTRIAL GARMENTS AGAINST HEAT AND FLAME
PROTECTIVE GARMENTS AGAINST MOLTEN METAL SPLASH AND RADIANT HEAT
FYRAL ® 500 INDUSTRIAL HEAT PROTECTIVE SUIT
FYRAL ® 600 INDUSTRIAL HEAT PROTECTIVE SUIT
P/N : 13304033
P / N :13304011
Produced in accordance with EN 531:1996 standard. According
to the Personal Protective Equipment Directive 89/686/EEC it
has EC Type Examination Certificate.
Produced in accordance with EN 11612:2008 standard.
According to the Personal Protective Equipment Directive
89/686/EEC it has EC Type Examination Certificate.
Marked.
A B4 C4
10
Marked.
A1 B1 C4
Layer system
Layer system
Outer layer : Aluminized Glass fiber
Heat barrier : 100% Aramid Felt
Inner layer : 100% Cotton
Outer layer
: Aluminized Glass fiber (single layer)
FYRAL ® 700P ALUMINIZED PARA-ARAMID CLOTHES
FYRAL ® 710P ALUMINIZED PARA-ARAMID APRON
P/N : 13305511
P/N : 13005010
Produced in accordance with EN 11612:2008 standard.
According to the Personal Protective Equipment Directive
89/686/EEC it has EC Type Examination Certificate.
to the Personal Protective Equipment Directive 89/686/EEC it has
EC Type Examination Certificate.
Marked.
Marked.
A1 B1 C3 D2 E3
A1 B1 C3 D2 E3
Material: Aluminized Paraaramid fabric
Application: FYRAL® 700P designed for protection against molten metal splash and radiant heat.
www.ist.com.tr
11
FYRAL ® 720P ALUMINIZED PARA-ARAMID HOOD
FYRAL ® 730P ALUMINIZED PARA-ARAMID GAITERS
P/N : 13005013
P/N : 13005012
to the Personal Protective Equipment Directive 89/686/EEC it has
EC Type Examination Certificate.
Marked.
A1 B1 C3 D2 E3
Application: FYRAL® 720P is designed for protection against molten metal splash and radiant heat.
12
Marked.
A1 B1 C3 D2 E3
FYRAL ® 740P ALUMINIZED PARA-ARAMID SLEEVES
METAL SPLASH GUARD 375 - G1 L
P/N : 13005011
P/N : 13810511
the Personal Protective Equipment Directive 89/686/EEC it has EC Type
Marked.
Produced in accordance with EN 11612:2008 and EN
11611:2007 standards. According to the Personal Protective
Equipment Directive 89/686/EEC it has EC Type Examination
Certificate.
Marked.
A1 B1 C3 D2 E3
A1 B1 C2 D3 E3 F1
Material: Aluminized paraaramid fabric
EN ISO 11611:2007, Class 2
Application: FYRAL® 740P is designed for protection against molten metal splash and radiant heat.
Material: Viscose FR/Wool/Polyamide/Pararamid/ Antistatic
Application: Metal Splash Guard ® welding and molten
metal splash protective garments enable protection against
welding and molten metal splash with their special design
and fabric content, also they are suitable for welding work.
• All parts of the garments are made from flame retardant materials.
• 100% Aramid threads are used in the sewing of the garments.
• Garments do not contain any material which is harmful to the human health and environment.
www.ist.com.tr
13
PROTECTIVE garments AGAINST ELECTRIC ARC
ELECTRIC ARC PROTECTIVE GARMENTS
ELECTpro® G2 L ARC/E PROTECTIVE CLOTHING ELECTRIC ARC
ELECTpro® Cotton G2L ARC/C PROTECTIVE CLOTHING ELECTRIC ARC
P/N : 18022822
P/N : 18022822
EN ISO 11612:2008
EN ISO 61482 1-2:2007
EN ISO 11612:2008
EN ISO 61482 1-2:2007
ELECTpro ® garments are designed to protect the body, arms and
legs of the personnel against thermal effects of electric arc. These
garments are certified according to 89/686/EEC personel protective
equipment, EN 61482-1/2 and EN ISO 11612:2008 standards.
ELECTpro ® garments are designed to protect the body, arms and
legs of the personnel against the thermal effects of electric arc. These
garments are certified according to 89/686/EEC personnel protective
equipment, EN 61482-1/2 and EN ISO 11612:2008 standards.
Marked.
Marked.
A1 B1 C1
CLASS 2 (7Ka)
A1 B2 C2
CLASS 2 (7Ka)
Layer system
Layer system
Outer system : (50:49:1)% Metaaramid/Viscose FR/Antistatic fibre
Inner layer
: (50:50)% Metaaramid/Viscose FR
Design: In order to realize easily whether the cloth is
damaged or not, the inner layer is manufactured
in a different colour. By this means, it provides
damaged clothes to be noticed.
Class2 (7kA) : The highest level which can be reached in order
to enabled protection against electric arc.
Arc current : 7 kA
Arc energy
: 318 Kj
Direct exposure
incident
energy Eio
: 10,1 cal/cm2
Outer system :Cotton FR/Polyamid (88/12)%
Inner layer
:Cotton FR/Polyamid (88/12)%
Design:In order to realize easily whether the cloth
is damaged or not, the inner layer is
manufactured in a different colour. By
this means, it can be enabled that the
damaged clothes are noticed.
Class2 (7kA)
:The highest level which can be reached in
order to enabled protection against electric arc.
Arc current
:7 kA
Arc energy
:318 kJ
Direct exposure
incident
energy Eio
:10,1 cal/cm2
14
HEATPRO® AIR COOLED GARMENTS
HEATPRO® VORTEX AIR COOLED FURNACE GARMENTS
HEATPRO® VORTEX AIR-COOLED FURNACE GARMENTS
P/N: 13305440 Overall, aluminized fabric
P/N: 13305540 Jackets, aluminized fabric
P/N: 13219440 Heat and flame resistant fabric
P/N: 13305540 Heat and flame resistant fabric
HEATPRO ® VORTEX AIR COOLED FURNACE garment offers consistent and continuous cooling of the garment to minimize heat stress
on workers .
It provides air conditioning inside the garment that includes a vortex tube which converts compressed air into cold air stream. The
cold air circulates through the cappilary tube net placed between the layers of the garment. HEATPRO® garment increases worker
productivity in hot surroundings.
Have many advantages!
Vortex tube has the following advantages compared to the other refrigeration devices;
· simple, no moving parts,
· no need electricity or chemicals,
· small and light weight, low cost,
· maintenance free,
· instant cold air, durable,
· temperature adjustable.
Working principle of Vortex tube: Input pressured air first passes through a vortex generation chamber, which starts the air stream
rotating. The air stream at the chamber rotates as it is forced along the inner walls of the tube towards the control valve. Accelerated air
heats up as it spins along the inner walls of the tube . Compressed hot air is allowed to escape adjusting by control valve.
The remaining air is forced to return back through the center of the incoming air stream at a slower speed. The slower vortex gives up
energy and becomes cool . The cooled return air flows through the center of the vortex generation chamber and exits through the cold
air outlet .
Applications: Foundry, boiler house, steel production, glass production industries, cement production industries, forging industries
smelters, welding clothes, dyeing furnaces, mining furnaces, cleaning for harmful materials
Material: Aluminized covered or heat and flame resistant fabrics.
Design: We can offer you different models like coverall or coat made from various fabric options.
www.ist.com.tr
15
PROTECTIVE GARMENTS AGAINST WILDLAND FIRES
PROTECTIVE GARMENTS MADE FROM PBI TRIGUARD®
PROTECTIVE GARMENTS MADE FROM NOMEX® ADVANCE
P/N : 13220010
Design:
P/N : 132200120
The garment is designed for wildland firefighting.
Garment is made from PBI Triguard® fabric.
All seams are 100% aramid yarn.
Reflective is certified according to EN 469 and EN 471.
Design, instructions, label and size are in compatible with EN
340 standard.
Garment does not have any materials harmful for human or
environment.
The garment is designed for wildland firefighting.
Garment is made from NOMEX® ADVANCE fabric.
Reflective is certified according to EN 469 and EN 471.
Design, instructions, label and size are in compatible with EN
340 standard.
Garment does not have any materials harmful for human or
environment.
Design:
PBI TRIGUARD® is the registered trademark of PBI Performance Products, Inc.
16
PROTECTIVE INDUSTRIAL garments AGAINST HEAT AND FLAME
GENERAL PURPOSES
FYRTEX® SERIES INDUSTRIAL GARMENTS
IST® HEAT AND FLAMEPROOF T-SHIRT&INNERWEAR
P/N: 13518411 100% KERMEL®
Fyrtex® series garments are certified according to EN ISO 11612:2008
standard and 89/686/EEC directives.
Marked.
P/N: 13518450 50:50% KERMEL®/Viscose FR
Manufactured according to EN ISO 11612:2008 standard and
89/686/EEC directives.
A1 B1 C1
Marked.
Layer Options:
NOMEX® COMFORT
KERMEL® ANTISTATIC
COTTON FR
PBI GOLD®
PBI TRIGUARD®
KERMEL®/LENZING FR®
CARBON-X®
A1 B1 C1
Layer Options:
100% KERMEL®
50:50% KERMEL®/LENZING FR®
Design:
- All parts of the garments are made of fire resistant material.
- All seams are 100% aramid yarn.
- Reflective is certified as per EN 469, EN 533 and EN 471.
- Design, instructions, labels and sizes are in compatible with EN 340
standard.
- Garment does not have any materials harmful for human or
environment.
Design:
They are produced to protect against heat and flame.
NOMEX® is the registered trademarks of DuPont.
KERMEL® is the registered trademark of KERMEL Company.
LENZING FR® is the registered trademark of Lenzing AG.
PBI GOLD® is the registered trademark of PBI Performance Products, Inc.
www.ist.com.tr
17
PROTECTIVE INDUSTRIAL garments AGAINST HEAT AND FLAME
GENERAL PURPOSES
IST® KNITTED FIRE HOODS
FIREMAN FLAME RETARDANT RAINCOAT
P/N: 14021500 100% KERMEL®
P/N 14050600
P/N: 14021500 50:50%, KERMEL®/VIscose FR
P/N: 14021500 80:20%, paraaramId/LenzIng FR®
Produced in accordance with EN 13911:2004 standard and
89/686/EEC directives.
Marked.
Marked.
INDEX 3 EN 533 and EN 343
Design:
Raincoat is made from PVC coated polyester waterproof
fabric
It can be seen at night with reflective strips and the colour is
orange
When fabric is contacted to flame, it does not melt or drip.
Purpose of use:
Fireman raincoat is made of protecive material which is used
during against water splashes and flame lick.
Layer Options
100% KERMEL®
50:50% KERMEL® / Lenzing FR®
80:20% Paraaramid / Lenzing FR®
Design:
Fire hood is produced for protecting user’ s head, neck and
shoulders against heat and flame. It can easily be used with
helmet and mask.
KERMEL® is the registered trademark of KERMEL Company.
Lenzing FR® is the registered trade mark of LENZING AG.
18
EMERGENCY SHOWERS AND EYE-WASH FOUNTAINS
ıstec® (EN 15154 -1 & EN 15154 - 2)
EMERGENCY SHOWERS
eye - wash fountaıns
EYE-WASH FOUNTAINS
STAINLESS STEEL
WALL MOUNTED WITH FLANGE PUSH HANDLE CONTROL
P/N 15011000
Standard
EN 15154 - 2
Operate manually, suitable to connect with the wall flange. All pipes
are made of stainless steel. Bowl can be chosen as stainless steel and
ABS.
Features
Pipes
: 1 1/4” Stainless Steel
Water Inlet: 1/2”
Water Outlet: 1 1/4”
Water Flow
: min. 6 lt/min
Bowl
Stainless Steel ABS
: Diameter 300 mm
: Diameter 250 mm - Colour yellow or green
Weight
Stainless Steel
: 5,800 kg
ABS : 4,750 kg
Packet Dimensions : 320 x 320 x 220 mm (HxWxD)
EYE-WASH FOUNTAINS
GALVANIZED AND PAINTED
P/N 15011500
Standard
EN 15154 - 2
Operate manually, suitable to connect with the wall flange.
All pipes are made of galvanized steel.
Electrostatic powder coating.
Standard color is green. (RAL 6029) different colours are
available on request.
Bowl can be selected as galvanized steel or ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1 1/4” Galvanized Painted
: 1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Galvanized Painted : Diameter 300 mm
ABS
Weight
Galvanized Painted : 6,150 kg
ABS : 5,100 kg
20
ıstec®
EMERGENCY SHOWERS
ıstec®
EYE-WASH FOUNTAINS
STAINLESS STEEL
WALL MOUNTED WITH BRACKET PUSH HANDLE CONTROL
P/N 15011100
Standard
EN 15154 - 2
Suitable to connect with the wall bracket. All pipes are made of
stainless steel. Bowl can be chosen as stainless steel and ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/2”
:min. 6 lt/min
Bowl
Stainless Steel ABS
: Diameter 300 mm
Weight
Stainless Steel
: 5,950 kg
ABS : 4,900 kg
Packet Dimensions :320 x 320 x 220 mm (HxWxD)
EYE-WASH FOUNTAINS
GALVANIZED AND PAINTED
WALL MOUNTED WITH BRACKET PUSH HANDLE CONTROL
P/N 15011600
Standard
EN 15154 - 2
Suitable to connect with the wall bracket. All pipes are made of
galvanized steel. Electrostatic powder coated. Standard colour
is green. (RAL 6029) different colours are available on request.
Bowl can be chosen as stainless steel and ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/2”
: min. 6 lt/min
Bowl
ABS
Weight
ABS : 4,900 kg
www.ist.com.tr
21
EMERGENCY SHOWERS
EYE-WASH FOUNTAINS
STAINLESS STEEL / GALVANIZED AND PAINTED
P/N 15011300
Stainless Steel
P/N 15011800
Galvanized Painted
Standard
EN 15154 - 2
Suitable to connect with the wall flange. All pipes are available
stainless steel or sheet steel. Cover is automatically opened when
valve is opened.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1 1/4” Stainless Steel / Galvanized Painted
:1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Steel : Diameter 300 mm
ABS:
Diameter 250 mm - Colour yellow or green
Weight
Stainless Steel
: 7,350 kg
EYE-WASH FOUNTAINS
STAINLESS STEEL / GALVANIZED AND PAINTED
WALL MOUNTED WITH FLANGE FOOT CONTROL
P/N 15011200
Stainless Steel
P/N 15011700
Galvanized and Painted
Standard
EN 15154 - 2
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1 1/4” Stainless Steel / Galvanized Painted
: 1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Steel ABS
: Diameter 300 mm
Weight
Stainless Steel
: 7,050 kg
ABS
: 6,000 kg
Galvanized
: 7,400 kg
ABS
: 6,350 kg
22
ıstec®
EMERGENCY SHOWERS
ıstec®
EYE-WASH FOUNTAINS
STAINLESS STEEL
COUNTERTOP MOUNTED PUSH HANDLE CONTROL
P/N 15012000
Standard
EN 15154 - 2
It is suitable to connect on a table or bench. All pipes are made of
stainless steel. Bowl can be chosen as stainless steel and ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/2”
: min. 6 lt/min
Bowl
Stainless Steel ABS
: Diameter 300 mm
Weight
Stainless Steel
: 5,050 kg
ABS : 4,000 kg
EYE-WASH FOUNTAINS
GALVANIZED - PAINTED
COUNTERTOP MOUNTED PUSH HANDLE CONTROL
P/N 15012500
Standard
EN 15154 - 2
It is suitable to connect on a table or bench. All pipes are made
of galvanized steel. Electrostatic powder coated. Standard color
is green. (RAL 6029) different colours are availble on request.
Bowl can be selected as galvanized steel and ABS for bowl.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/2”
: min. 6 lt/min
Bowl
ABS:
Weight
ABS : 4,300 kg
www.ist.com.tr
23
EMERGENCY SHOWERS
EYE-WASH FOUNTAINS
STAINLESS STEEL
PUSH HANDLE OPERATED/PEDESTAL MOUNTED
P/N 15013000
Standard
EN 15154 - 2
All pipes are made of stainless steel. Bowl can be selected as
stainless steel or ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Stainless Steel : Diameter 300 mm
ABS:
Weight
Stainless Steel
: 9,600 kg
ABS : 8,550 kg
EYE-WASH FOUNTAINS
PAINTED GALVANIZED
PUSH HANDLE OPERATED/PEDESTAL MOUNTED
P/N 15013500
Standard
EN 15154 - 2
All pipes are made of galvanized steel. Electrostatic powder
coated. Standard color is green. (RAL 6029) different colours are
available on request. Bowl can be selected as galvanized steel or
ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Galvanized Painted: Diameter 300 mm
ABS:
Weight
Galvanized Painted: 9,950 kg
ABS : 8,900 kg
Packet Dimensions: 810 x 320 x 220 mm (HxWxD)
24
ıstec®
EMERGENCY SHOWERS
ıstec®
EYE-WASH FOUNTAINS
STAINLESS STEEL
PEDESTAL MOUNTED/TREADLE FOOT CONTROL
P/N 15014000
Standard
EN 15154 - 2
Pedestal mounted. All pipes are made of stainless steel. Bowl can
be selected as stainless steel or ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
: 1/2”
: 1 1/4”
:min. 6 lt/min
Bowl
Stainless Steel :Diameter 300 mm
ABS:
Weight
Stainless Steel
:10,400 kg
ABS :3,350 kg
Packet Dimensions:810 x 320 x 220 mm (HxWxD)
EYE-WASH FOUNTAINS
PAINTED GALVANIZED
PEDESTAL MOUNTED/TREADLE FOOT CONTROL
P/N 15014500
Standard
EN 15154 - 2
Pedestal mounted. All pipes are made of galvanized steel.
Electrostatic powder coated. Standard color is green. (RAL 6029)
different colours are availble on request. Bowl can be selected as
galvanized steel or ABS.
Features
Pipes
Water Inlet
Water Outlet
Water Flow
:1/2”
: 1 1/4”
: min. 6 lt/min
Bowl
Galvanized Painted:Diameter 300 mm
ABS:
Weight
ABS : 9,700 kg
www.ist.com.tr
25
EMERGENCY SHOWERS
combıned unıts
EYE-WASH FOUNTAINS
STAINLESS STEEL
LABORATORY TYPE - COUNTERTOP MOUNTED
P/N 15012020
Stainless Steel
P/N 15012525
Galvanized Painted
Produced in accordance with EN 15154-2 standard.
Suitable to connect to the table or to the bench. All pipes are
made of stainless steel or galvanized steel.
Features
Pipes : 1” Galvanized painted or stainless steel
Water Inlet : 1/2”
Water Flow : min. 6 lt/min
Weight
Stainless Steel : 2,100 kg
EYE-WASH FOUNTAINS
PLATFORM OPERATED/PEDESTAL WITH SUPPORT
P/N : 15015000
Stainless Steel
P/N : 15015500
Galvanized Painted
Platform controlled. All pipes are made of Galvanized painted or
stainless steel. Bowl can be stainless steel, galvanized steel or ABS
plastics.
Features
Pipes
Water Inlet Water Flow
: Galvanized painted or stainless steel
: 1”
: min. 6lt/min
Bowl
Stainless Steel
: Diameter 300 mm
Galvanized Painted:
Diameter 300 mm
ABS:
Weight
Stainless Steel : 30,750 kg - ABS : 29,700 kg
Galvanized Painted : 31,750 kg – ABS : 30,700 kg
Packet Dimensions : 950 x 850 x 280 (HxWxD) mm
26
ıstec®
EMERGENCY SHOWERS
showers emergency eye-face
ıstec®
EYE-WASH FOUNTAINS
FREEZE PROOF/PUSH HANDLE CONTROL
P/N : 15016000
Stainless Steel
P/N : 15016500
Galvanized Painted
Designed to protect against freezing. All pipes are made of
Galvanized painted or stainless steel.
Features
Pipes
Water Inlet Water Outlet
Water Flow
: Galvanized painted steel or stainless steel
: 1/2”
: 1 ¼”
: min. 6lt / min
Bowl
Stainless Steel
: Diameter 300 mm
Galvanized Painted:
Diameter 300 mm
ABS:
Weight
Stainless Steel
: 9,950 kg - ABS : 8,900 kg
EYE-WASH FOUNTAINS
FREEZE PROOF/TREADLE FOOT CONTROL
P/N : 15017000
Stainless Steel
P/N : 15017500
Galvanized Painted
Designed to protect against freezing. All pipes are made of
galvanized painted steel or stainless steel.
Features
Pipes
Water Inlet Water Outlet
Water Flow
: Galvanized painted or stainless steel
: 1”
: 1 ¼”
: min. 6lt/min
Bowl
Stainless Steel
: Diameter 300 mm
Galvanized Painted:Diameter 300 mm
ABS:
Weight
Stainless Steel
: 13,950 kg - ABS : 12,900 kg
www.ist.com.tr
27
EMERGENCY SHOWERS
combIned emergency showers
COMBINED EMERGENCY SAFETY SHOWER & EYE-WASH FOUNTAIN
STAINLESS STEEL
PEDESTAL MOUNTED/PUSH HANDLE CONTROL FOR EYEBATH
PULL ROD CONTROL FOR SHOWER
P/N 15031000
Standards
EN 15154 - 1
EN 15154 - 2
Pedestal mounted. Bowl can be selected as stainless steel or ABS. All pipes
are made of stainless steel.
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
: min. 6 lt/min (Eye Wash)
: min. 60 lt/min (Body Shower)
Shower Head and Bowl
Stainless Steel: Diameter 300 mm
ABS: Diameter 250 mm - Colour yellow or green
Weight
Stainless Steel
: 20,500 kg
ABS : 18,300 kg
COMBINED EMERGENCY SHOWER & EYE-WASH FOUNTAIN
PAINTED GALVANIZED
PEDESTAL MOUNTED/PUSH HANDLE CONTROL FOR EYEBATH
P/N 15031500
Standards
EN 15154 - 1
EN 15154 - 2
Pedestal mounted. Bowl can be selected as galvanized steel or
ABS. All pipes are made of galvanized steel. Different colours are
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
ABS:
Weight
ABS : 19,300 kg
28
ıstec®
EMERGENCY SHOWERS_
ıstec®
STAINLESS STEEL
PEDESTAL MOUNTED/TREADLE FOOT CONTROL FOR EYEBATH
P/N 15032000
Standards
EN 15154 - 1
EN 15154 - 2
Bowl can be selected as stainless steel or ABS. All pipes are made
of stainless steel
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
Weight
Stainless Steel
: 21,400 kg
ABS : 19,200 kg
PAINTED GALVANIZED
PEDESTAL MOUNTED/TREADLE FOOT CONTROL FOR EYEBATH
P/N 15032500
Standards
EN 15154 - 1
EN 15154 - 2
Bowl can be selected as stainless steel or ABS. All pipes are made
of galvanized steel, standard color is green. Different colours are
Features
Pipes : 1 1/4” Galvanized Painted
Water Inlet
: 1”
Water Outlet
: 1 1/4”
Water Flow
Shower Head and bowl
Weight
ABS : 20,200 kg
www.ist.com.tr
29
EMERGENCY SHOWERS
STAINLESS STEEL
PEDESTAL MOUNTED/TREADLE FOOT CONTROL FOR SHOWER
PULL ROD CONTROL FOR EYEBATH
P/N 15033000
Standards
EN 15154 - 1
EN 15154 - 2
Shower head can be selected as stainless steel or ABS. All pipes are
made of stainless steel.
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
Weight
Stainless Steel
: 21,400 kg
ABS : 19,200 kg
GALVANIZED PAINTED
PEDESTAL MOUNTED/TREADLE FOOT CONTROL FOR SHOWER PULL
ROD CONTROL FOR EYEBATH
P/N 15033500
Standards
EN 15154 - 1
EN 15154 - 2
Shower head can be selected as galvanized steel or ABS. All pipes are
made of galvanized steel. Standard color is green. Different colours
are available on request.
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
:min. 6 lt/min (Eye Wash)
:min. 60 lt/min (Body Shower)
Weight
ABS : 20,200 kg
30
ıstec®
EMERGENCY SHOWERS
ıstec®
STAINLESS STEEL / WALL MOUNTED
PUSH HANDLE FOR EYEWASH / PULL ROD OPERATED FOR SHOWER
P/N 15034000
Standards
EN 15154 - 1
EN 15154 - 2
Shower head and eyewash bowl can be selected as stainless steel or
ABS. All pipes are made of stainless steel.
Features
Pipes Water Inlet
Water Outlet
Water Flow
:1”
: 1 1/4”
Stainless Steel:
Diameter 300 mm
ABS:
Weight
Stainless Steel
: 17,550 kg
ABS : 15,350 kg
GALVANIZED PAINTED / WALL MOUNTED
PUSH HANDLE FOR EYEBATH PULL ROD OPERATED FOR SHOWER
P/N 15034500
Standards
EN 15154 - 1
EN 15154 - 2
Shower head and eyewash bowl are galvanized steel or ABS. All pipes
are made of galvanized steel. Standard color is green. Different colours
Features
Pipes Water Inlet
Water Outlet
Water Flow
: 1”
: 1 1/4”
Weight
ABS : 16,000 kg
www.ist.com.tr
31
EMERGENCY SHOWERS
COMBINED EMERGENCY SAFETY SHOWER & EYEWASH
STAINLESS STEEL / GALVANIZED PAINTED / FREEZE PROOF
WITH AUTOMATIC VALVE / PEDESTAL MOUNTED
PUSH HANDLE FOR EYEBATH / PULL ROD CONTROL FOR SHOWER
P/N 15036000 Stainless Steel
P/N 15036500 Galvanized Painted
Standards
EN 15154 - 1
EN 15154 - 2
Designed to be protected against freezing. All pipes are made of
stainless steel / galvanized steel. Shower head can be galvanized
steel, stainless steel or ABS.
Features
Pipes : 1 1/4” Galvanized Painted or Stainless Steel
Water Inlet
: 1”
Water Outlet
: 1 1/4”
Water Flow
min. 60 lt/min (Body Shower)
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
Weight
Stainless Steel ABS Galvanized
ABS Packet Dimensions
: 20,950 kg
: 18,850 kg
: 21,950 kg
: 19,850 kg
: 860 x 350 x 250 mm (HxWxD)
COMBINED EMERGENCY SAFETY SHOWER & EYEWASH
STAINLESS STEEL / GALVANIZED PAINTED
FREEZE PROOF / VALVE WITH AUTOMATIC - PEDESTAL MOUNTED
PUSH HANDLE FOR EYEBATH / PULL ROD CONTROL FOR SHOWER
Standards
EN 15154 - 1
EN 15154 - 2

stainless steel / galvanized steel. Shower head can be galvanized
Features
Water Inlet
: 1”
Water Outlet
: 1 1/4”
Water Flow
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
Weight
32
: 20,950 kg
: 18,850 kg
: 21,950 kg
: 19,850 kg
: 860 x 350 x 250 mm (HxWxD)
ıstec®
EMERGENCY SHOWERS
ıstec®
COMBINED SHOWER
FREEZE PROTECTION / WITH DOUBLE VALVE / TREADLE FOOT
CONTROL FOR EYEBATH / PANEL CONTROL FOR SHOWER
Standards
EN 15154 - 1
EN 15154 - 2

stainless steel / galvanized steel. Shower head can be painted steel,
stainless steel or ABS.
Features
Water Inlet
: 1”
Water Outlet
: 1 1/4”
Water Flow
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 34,250 kg
: 32,150 kg
: 35,250 kg
: 33,150 kg
: 1100 x 700 x 280 mm (HxWxD)
COMBINED SHOWER
TREADLE FOOT CONTROL FOR EYEBATH / PANEL CONTROL FOR SHOWER
Standards
EN 15154 - 1
EN 15154 - 2
Designed to be protected against freezing. All pipes are made of stainless
steel / galvanized steel. Shower head can be painted steel, stainless steel
or ABS.
Features
Pipes Water Inlet
Water Outlet
: 1 1/4” Galvanized painted or stainless steel
: 1”
: 1 1/4”
Water Flow
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 24,500 kg
: 22,400 kg
: 25,500 kg
: 23,400 kg
: 860 x 350 x 250 mm (HxWxD)
www.ist.com.tr
33
EMERGENCY SHOWERS
COMBINED SHOWER
TREADLE FOOT CONTROL FOR EYEBATH / PANEL CONTROL FOR SHOWER
Standards
EN 15154 - 1
EN 15154 - 2
You go over the platform, it Automatically provides water flow. The platform tray is suitable to connect to the ground. All pipes are made of galvanized steel or stainless steel. Shower head can be stainless steel, galvanized
steel or ABS. The standard colour is green. Different colours are available
on request.
Features
Pipes : 1 1/4” Galvanized painted or stainless steel
Water Inlet
: 1”
Water Outlet
: 1 1/4”
Water Flow
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 43,050 kg
: 40,950 kg
: 44,050 kg
: 41,950 kg
: 950 x 850 x 280 mm (HxWxD)
COMBINED SHOWER
FREEZ PROOF / PANEL CONTROL / PUSH HANDLE CONTROL
Standards EN 15154 - 1
EN 15154 - 2
You go over the platform, it automatically provides water flow. All pipes are
made of galvanized or stainless steel. Shower head can be stainless steel,
galvanized steel or ABS. The standard colour is green. Different colours are
Features
Pipes : 1 1/4” Galvanized painted or stainless steel
Water Inlet
: 1”
Water Flow
Galvanized Painted
: Diameter 300 mm
Stainless Steel
: Diameter 300 mm
ABS
34
Weight
: 34,250 kg
: 32,150 kg
: 35,250 kg
: 33,150 kg
: 850 x 690 x 280 mm (HxWxD)
ıstec®
EMERGENCY SHOWERS
emergency body showers
ıstec®
EMERGENCY SAFETY SHOWER
STAINLESS STEEL
PULL ROD OPERATED
P/N 15021000
Standard
EN 15154 - 1
Pedestal mounted. All pipes are made of stainless steel. Shower head
can be stainless steel or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
ABS
: Diameter 300 mm
Weight
Stainless Steel
: 14,500 kg
ABS : 13,450 kg
EMERGENCY SAFETY SHOWER
GALVANIZED - PAINTED
PULL ROD OPERATED
P/N 15021500
Standard
EN 15154 - 1
All pipes are made of galvanized steel. Electrostatic powder coated.
Standard color is green. (RAL 6029) can be different colors on request.
Shower dish can be selected as galvanized steel or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
ABS
Weight
ABS : 14,200 kg
www.ist.com.tr
35
EMERGENCY SHOWERS
Emergency Body Showers
EMERGENCY SHOWER
PEDESTAL MOUNTED / TREADLE FOOT CONTROL
P/N 15022000
Stainless Steel
P/N 15022500
Galvanized Painted
Standard
EN 15154 - 1
Pedestal mounted. All pipes are made of stainless steel or galvanized
steel. Galvanized painted models are coated electrostatic powder.
Standard colour is green. (RAL 6029) different colours are available
on request. Shower head can be stainless steel, galvanized steel or
ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
:min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 15,400 kg
: 14,350 kg
: 16,100 kg
: 15,050 kg
: 820 x 320 x 220 mm (HxWxD)
EMERGENCY SHOWER
WALL MOUNTED / PULL ROD CONTROL FOR SHOWER
P/N 15023000
Stainless Steel
Standard
EN 15154 - 1
All pipes are made of stainless steel or galvanized steel. Galvanized
painted models are coated electrostatic powder. Standard color is
green. (RAL 6029) different colours are available on request. Shower
head can be stainless steel, galvanized steel or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
36
: 11,150 kg
: 10,100 kg
: 11,750 kg
: 10,700 kg
: 820 x 320 x 170 mm (HxWxD)
ıstec®
EMERGENCY SHOWERS_
ıstec®
BODY SHOWER
PULL ROD CONTROL
P/N 15024000
Stainless Steel
P/N 15024500
Galvanized Painted
Standards
EN 15154 - 1
Connected to the wall with suitable valve. All tubes are made of
stainless steel or galvanized steel. Shower head can be stainless
steel, galvanized steel or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
ABS : 4,200 kg
Galvanized
: 5,450 kg
ABS : 4,400 kg
BODY SHOWER
CEILING MOUNT / PULL ROD CONTROL
P/N 15024020
Stainless Steel
P/N 15024520
Galvanized Painted
Standards
EN 15154 - 1
All tubes are made of stainless steel or galvanized steel. Shower
head can be stainless steel, galvanized steel or ABS. Standard
colour is green. Different colours are available on request.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 5,250 kg
: 4,200 kg
: 5,450 kg
: 4,400 kg
: 820 x 320 x 170 mm (HxWxD)
www.ist.com.tr
37
EMERGENCY SHOWERS
BODY SHOWER
PEDESTAL MOUNTED / SUPPORT CONTROL
Standard
EN 15154 - 1
The platform tray is suitable to connect to the ground. All pipes are
made of galvanized steel or stainless steel. Shower head is stainless
steel, galvanized or ABS. The standard colour is green. Different
colours are available on request.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
ABS : 34,500 kg
Galvanized
: 36,250 kg
ABS : 35,200 kg
BODY SHOWER
PEDESTAL MOUNTED / PANEL CONTROL
P/N15028000 Stainless Steel
Standard
EN 15154 - 1
All pipes are galvanized steel or stainless steel. Platform is suitable
to connect to the ground. Shower head is stainless steel, galvanized
steel painted or ABS. The standard colour is green. Different colours
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
38
Weight
: 26,250 kg
: 24,900 kg
: 29,950 kg
: 28,600 kg
: 850 x 690 x 280 mm (HxWxD)
ıstec®
EMERGENCY SHOWERS_
ıstec®
BODY SHOWER
FREEZE-PROOF WITH DOUBLE VALVE / PANEL CONTROL
Standard
EN 15154 - 1
Platform controlled. All tubes are made of stainless steel or
galvanized steel. Shower head is galvanized steel, stainless steel or
ABS. Designed to be protected against freezing.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
ABS : 30,700 kg
Galvanized
: 32,750 kg
ABS : 31,700 kg
BODY SHOWER
FREEZE-PROOF WITH AUTOMATIC VALVE / PULL ROD CONTROL
P/N 15026000
Stainless Steel
Standard
EN 15154 - 1
Pedestal mounted. All pipes are made of stainless steel / galvanized
steel. Shower head is galvanized painted steel, stainless steel or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
: 14,950 kg
: 13,900 kg
: 15,700 kg
: 14,650 kg
: 810 x 320 x 220 mm (HxWxD)
www.ist.com.tr
39
EMERGENCY SHOWERS
BODY SHOWER
FREEZE-PROOF WITH BEHIND WALL VALVE / PUSH HANDLE CONTROL
Standard
EN 15154 - 1
Wall mounted. Protection against freezing. All pipes are made of
stainless steel / galvanized steel. Shower head is galvanized painted
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
ABS : 9,550 kg
Galvanized
: 10,900 kg
ABS : 9,850 kg
Packet Dimensions: 820 x 320 x 220 mm (HxWxD)
BODY SHOWER
FREEZE-PROOF / UNDER GROUND / PULL ROD CONTROL
Standard
EN 15154 - 1
stainless steel / galvanized steel. Shower head is galvanized painted
Features
Pipes
Water Inlet
Water Flow
: 1”
:min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
ABS : 18,200 kg
Galvanized
: 20,250 kg
ABS : 19,200 kg
Packet Dimensions:810 x 320 x 220 mm (HxWxD)
40
ıstec®
EMERGENCY SHOWERS_
emergency showers - decontamInatIon unItS
ıstec®
EMERGENCY SHOWERS WITH CABINET
PLATFORM OPERATED
Standard
EN 15154 - 1
Autostart once stepped on the platform. Surrounded on three sides
by handrails and panels. Platform floor is mounted inside. Waste
water can be connected to water outlet easily via drainge vessel. an
entranca ramp is added to step on the platform easily. The standard
colour is green. Different colours are available on request. Shower
heads can be stainless steel, galvanized painted or ABS.
Features
Pipes
Water Inlet
Water Flow
: 1”
: min. 60 lt/min
Shower Head
Stainless Steel
: Diameter 300 mm
ABS
Weight
Galvanized
: 104,000 kg
DECONTAMINATION UNITS
Decontamination
showers
provides
sanitation
and
decontamination to the people exposed to chemical or biological
agents, as well as to extinguish burning clothes. Autostart
once stepped on the platform. 14 spray nozzle sprays water to
whole body. Swivelling spray provides easy decontamination.
Decontamination units can be covered from three sides to avoid
splashes (optional).
Features
Pipes:
Galvanized Painted, 304 Stainless Steel
Water Inlet
:1”
Handrails and Platform : Galvanized painted or stainless steel
Weight
Stainless Steel Galvanized
Packet Dimensions
: 55,900 kg
: 57,600 kg
: 950 x 850 x 280 mm (HxWxD)
www.ist.com.tr
41
EMERGENCY SHOWERS
PORTABLE EYE-WASH FOUNTAINS
PORTABLE EYE-WASH FOUNTAINS WITH TRIGGER VALVE
STAINLESS STEEL
P/N 15019010
Standard
EN 15154 - 2
Designed for application where fixed eyewash fountains can not be
installed against various hazards. Car easily be carried by two people. 2”
filling plug, 25 lt water capacity. Sprays aerated water. Rinses eyes and face
with clean water via nozzles. Operated by a trigger valve. Unlimited use by
filling water and air.
Features
Water Capacity
:
Water Inlet
:
Water Flow
:
Water Tank
:
Pipes
:
Weight
:
Packet Dimensions:
25 lt.
2"
min. 8,5 lt/min (Eye Wash)
304 Stainless Steel
304 Stainless Steel
10,350 kg
320 x 320 x 830 mm (HxWxD)
Other Parts: Stainless steel ball valves, pressure safety valve, flexible
shower head, dust protection covers.
PORTABLE EYE-WASH FOUNTAIN WITH FIXED SPRAY NOZZLE
STAINLESS STEEL
P/N15019020
Standard EN 15154 - 2
Designed for application where fixed eyewash fountains can not be
installed against various hazards. Car easily be carried by two people. 2”
filling plug, 25 lt water capacity. Sprays aerated water. Rinses eyes and
face with clean water via twin spray nozzles. Operated by a push handle.
Unlimited use by filling water and air.
Features
Water Capacity
:
Water Inlet
:
Water Flow
:
Water Tank
:
Pipes
:
Weight
:
Packet Dimensions :
25 lt.
2”
min. 8,5 lt/min (Eye Wash)
304 Stainless Steel
304 Stainless Steel
10,350 kg
320 x 320 x 830 mm (HxWxD)
Other Parts: Stainless steel ball valves, pressure safety valve, flexible
shower head, dust protection covers.
42
ıstec®
Innovative Designs for
Extreme Weather Conditions
Integrated Freeze Protection Valve System
for freeze protection
Valve port opens on descending
temperatures, allows discharging
and replace with warmer Inlet water
Auto Discharge Double Valve System
for freeze and hot water protection
Auto Discharge Underground Push Valve System
for freeze and hot water protection
www.ist.com.tr
43
SAFETY CANS
SAFETY CANS
FOR STORAGE AND CARRIAGE OF SOLVENTS
SAFECAN® 2 lt -0,5 Gallon SOLVENT STORAGE / CARRIAGE CAN
P/N : 22010002 Galvanized Painted
P/N : 22020002 Stainless Steel
• Spring-cover mechanism that allows transportation and drainage
• Resistant and protective electrostatic powder paint
(in galvanized models)
• Polished surfaces (in stainless steel models)
• Reinforced body structure to impacts and strokes
• Base structure is reinforced with clutch and combined with continous weld.
• Model is available in various sizes
Red
Blue
Yellow
Green
: For flammable and sparkler liquids
: For Kerosene
: Fuel oil for gasoline and fuels
: For Oils and Fats
Material
Empty weight
Packet Dimensions
Total weight
: 0,70 mm
: 1,200 kg
: 210x210x260 mm (HxWxD)
: 1,550 kg SAFECAN® 4 lt -1 Gallon SOLVENT STORAGE / CARRIAGE CAN
P/N: 22010004 Galvanized Painted
P/N: 22020004 Stainless Steel
• Spring-cover valve mechanism that allows transportation and drainage
• Resistant and protective electrostatic powder paint (in galvanized models)
Red
Blue
Yellow
Green
Material
Empty weight
Packet Dimensions
Total weight
: For Kerosene
: For Oils and Fats
: 0,70 mm
: 1,500 kg
: 210x210x260 mm (HxWxD)
: 1,900 kg www.ist.com.tr
45
SAFETY CANS
SAFECAN® 7,5 lt -2 Gallon SOLVENT STORAGE/CARRIAGE CAN
Red
Blue
Yellow
Green
Material
Empty weight
Packet Dimensions
Total weight
: For Kerosene
: For Oils and Fats
: 0,70 mm
: 2,000 kg
: 260x260x340 mm (HxWxD)
: 2,550 kg SAFECAN® 9,5 lt - 2,5 Gallon SOLVENT STORAGE/ CARRIAGE CAN
46
Red
Blue
Yellow
Green
: For Kerosene
: For Oils and Fats
Material
Empty weight
Packet Dimensions
Total weight
: 0,70 mm
: 2,200 kg
: 260x260x380 mm (HxWxD)
:2,800 kg
SAFETY CANS
SAFECAN® 11,5 lt -3 Gallon SOLVENT STORAGE / CARRIAGE CAN
Red
Blue
Yellow
Green
: For Kerosene
: For Oils and Fats
Material
Empty weight
Packet Dimensions
Total weight
: 0,70 mm
: 2,650 kg
: 310x310x360 mm (HxWxD)
:3,350 kg
SAFECAN® 15 lt -4 Gallon SOLVENT STORAGE / CARRIAGE CAN
Red
Blue
Yellow
Green
: For Kerosene
: For Oils and Fats
Material
Empty weight
Packet Dimensions
Total weight
: 0,70 mm
: 3,000 kg
: 310x310x420 mm (HxWxD)
:3,750 kg
www.ist.com.tr
47
SAFETY CANS
SAFECAN® 19 lt -5 Gallon SOLVENT STORAGE / CARRIAGE CAN
- Spring-cover valve mechanism that allows transportation and
drainage
- Resistant and protective electrostatic powder paint (in galvanized
models)
- Polished surfaces (in stainless steel models)
- Reinforced body structure to impacts and strokes
- Base structure is reinforced with clutch and combined with continous
weld.
- Model is available in various sizes
Red
Blue
Yellow
Green
: For Kerosene
: For Oils and Fats
Material
Empty weight
Packet Dimensions
Total weight
: 0,70 mm
: 3,300 kg
: 310x310x470 mm (HxWxD)
:4,100 kg
SAFECAN® TYPE 2 SOLVENT STORAGE / CARRIAGE CAN
48
0.5 gallon
2
Liter
1
gallon
4
Liter
2
gallon
7,5 Liter
2,5 gallon
9,5 Liter
3
gallon
11,5 Liter
4
gallon
15 Liter
5
gallon
19 Liter
ISCI SAGLIGI TECHIZATI
SANAYI ve TICARET LTD. STI.
Address: Ostim - Mahallesi Melih Gökçek Bulvarı 31.
Cadde 2269. Sokak No:42/1-2
www.ist.com.tr
Phone : + 90 312 384 1300 (pbx)
Fax: + 90 312 341 7303
Gsm: + 90 533 472 5618
e-mail: [email protected]
www.reflexmatbaa.com
İvedik O.S.B. / Yenimahalle / Ankara / Turkiye, 06374

PRODUCT CATALOG

Transcription

Similar documents

2016 - Stephenson`s Rental Services

Warum Überhosen…? - Atemschutzunfaelle.eu