Chapter 7: Modifiability

Transcription

Chapter 7: Modifiability
Chapter 7: Modifiability Rob Pe5t SWE 443 Spring 2015 © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Chapter Outline • 
• 
• 
• 
• 
What is Modifiability? Modifiability General Scenario TacLcs for Modifiability A Design Checklist for Modifiability Summary © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License What is Modifiability? •  Modifiability is about change and our interest in it is in the cost and risk of making changes. •  To plan for modifiability, an architect has to consider three quesLons: –  What can change? –  What is the likelihood of the change? –  When is the change made and who makes it? © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Modifiability General Scenario Por$on of Scenario
Source
SLmulus
Possible Values
End user, developer, system administrator
A direcLve to add/delete/modify funcLonality, or change a quality aOribute, capacity, or technology
ArLfacts
Code, data, interfaces, components, resources, configuraLons, … Environment
RunLme, compile Lme, build Lme, iniLaLon Lme, design Lme
Response
One or more of the following: • make modificaLon • test modificaLon • deploy modificaLon
Response Cost in terms of: Measure • number, size, complexity of affected arLfacts • effort • calendar Lme • money (direct outlay or opportunity cost) • extent to which this modificaLon affects other funcLons or quality aOributes new dCefects © Len B• ass, Paul lements, iRntroduced
ick Kazman, distributed under CreaLve Commons AOribuLon License Sample Concrete Modifiability Scenario •  The developer wishes to change the user interface by modifying the code at design Lme. The modificaLons are made with no side effects within three hours. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Goal of Modifiability TacLcs •  TacLcs to control modifiability have as their goal controlling the complexity of making changes, as well as the Lme and cost to make changes. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Goal of Modifiability TacLcs © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Modifiability TacLcs Modifiability Tactics
Reduce Size
of a Module
Change
Requests
Split Module
Increase
Cohesion
Increase
Semantic
Coherence
Reduce
Coupling
Encapsulate
Defer
Binding
Changes Made
and Deployed
Use an
Intermediary
Restrict
Dependencies
Refactor
Abstract Common
Services
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Reduce Size of a Module •  Split Module: If the module being modified includes a great deal of capability, the modificaLon costs will likely be high. Refining the module into several smaller modules should reduce the average cost of future changes. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Increase Cohesion •  Increase SemanLc Coherence: If the responsibiliLes A and B in a module do not serve the same purpose, they should be placed in different modules. This may involve creaLng a new module or it may involve moving a responsibility to an exisLng module. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Reduce Coupling •  Encapsulate: EncapsulaLon introduces an explicit interface to a module. This interface includes an API and its associated responsibiliLes, such as “perform a syntacLc transformaLon on an input parameter to an internal representaLon.” •  Use an Intermediary: Given a dependency between responsibility A and responsibility B (for example, carrying out A first requires carrying out B), the dependency can be broken by using an intermediary. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Reduce Coupling •  Restrict Dependencies: restricts the modules which a given module interacts with or depends on. •  Refactor: undertaken when two modules are affected by the same change because they are (at least parLal) duplicates of each other. •  Abstract Common Services: where two modules provide not-­‐quite-­‐the-­‐same but similar services, it may be cost-­‐effecLve to implement the services just once in a more general (abstract) form. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Defer Binding •  In general, the later in the life cycle we can bind values, the beOer. •  If we design arLfacts with built-­‐in flexibility, then exercising that flexibility is usually cheaper than hand-­‐coding a specific change. •  However, pu5ng the mechanisms in place to facilitate that late binding tends to be more expensive. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Alloca$on of Determine which changes or categories of changes are Responsibili$es
likely to occur through considera$on of changes in technical, legal, social, business, and customer forces. For each poten$al change or category of changes • Determine the responsibili$es that would need to be added, modified, or deleted to make the change. • Determine what other responsibili$es are impacted by the change. • Determine an alloca$on of responsibili$es to modules that places, as much as possible, responsibili$es that will be changed (or impacted by the change) together in the same module, and places responsibili$es that will be changed at different $mes in separate modules.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Coordina$on Determine which func$onality or quality aHribute can Model
change at run$me and how this affects coordina$on; for example, will the informa$on being communicated change at run-­‐$me, or will the communica$on protocol change at run-­‐$me? If so, ensure that such changes affect a small number set of modules. Determine which devices, protocols, and communica$on paths used for coordina$on are likely to change. For those devices, protocols, and communica$on paths, ensure that the impact of changes will be limited to a small set of modules. For those elements for which modifiability is a concern, use a coordina$on model that reduces coupling such as publish/subscribe, defers bindings such as enterprise service bus, or restricts dependencies such as broadcast.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Data Determine which changes (or categories of changes) to the data abstrac$ons, Model
their opera$ons, or their proper$es are likely to occur. Also determine which changes or categories of changes to these data abstrac$ons will involve their crea$on, ini$aliza$on, persistence, manipula$on, transla$on, or destruc$on. For each change or category of change, determine if the changes will be made by an end user, system administrator, or developer. For those changes made by an end user or administrator, ensure that the necessary aHributes are visible to that user and that the user has the correct privileges to modify the data, its opera$ons, or its proper$es. For each poten$al change or category of change • determine which data abstrac$ons need to be added, modified, or deleted • determine whether there would be any changes to the crea$on, ini$aliza$on, persistence, manipula$on, transla$on, or destruc$on of these data abstrac$ons • determine which other data abstrac$ons are impacted by the change. For these addi$onal abstrac$ons, determine whether the impact would be on their opera$ons, proper$es, crea$on, ini$aliza$on, persistence, manipula$on, transla$on, or destruc$on. • ensure an alloca$on of data abstrac$ons that minimizes the number and severity of modifica$ons to the abstrac$ons by the poten$al changes Design your data model so that items allocated to each element of the data model are likely to change together.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Mapping Among Architectural Elements
Determine if it is desirable to change the way in which func$onality is mapped to computa$onal elements (e.g. processes, threads, processors) at run$me, compile $me, design $me, or build $me. Determine the extent of modifica$ons necessary to accommodate the addi$on, dele$on, or modifica$on of a func$on or a quality aHribute. This might involve a determina$on of, for example: • execu$on dependencies • assignment of data to databases • assignment of run$me elements to processes, threads, or processors Ensure that such changes are performed with mechanisms that u$lize deferred binding of mapping decisions.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Resource Determine how the addi$on, dele$on, or modifica$on of Management
a responsibility or quality aHribute will affect resource usage. This involves, for example, • determining what changes might introduce new resources or remove old ones or affect exis$ng resource usage. • determining what resource limits will change and how Ensure that the resources aTer the modifica$on are sufficient to meet the system requirements. Encapsulate all resource managers and ensure that the policies implemented by those resource managers u$lize are themselves encapsulated and bindings are deferred to the extent possible.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Binding For each change or category of change Time
• Determine the latest $me at which the change will need to be made. • Choose a defer-­‐binding mechanism (see Sec$on 7.2.4) that delivers the appropriate capability at the $me chosen. • Determine the cost of introducing the mechanism and the cost of making changes using the chosen mechanism • Do not introduce so many binding choices that change is impeded because the dependencies among the choices are complex and unknown. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Design Checklist for Modifiability Choice of Determine what modifica$ons are made easier or harder Technology
by your technology choices. • Will your technology choices help to make, test, and deploy modifica$ons? • How easy is it to modify your choice of technologies itself (in case some of these technologies change or become obsolete)? Choose your technologies to support the most likely modifica$ons. For example, an Enterprise Service Bus makes it easier to change how elements are connected but may introduce vendor lock in.
© Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License Summary •  Modifiability deals with change and the cost in Lme or money of making a change, including the extent to which this modificaLon affects other funcLons or quality aOributes. •  TacLcs to reduce the cost of making a change include making modules smaller, increasing cohesion, and reducing coupling. Deferring binding will also reduce the cost of making a change. © Len Bass, Paul Clements, Rick Kazman, distributed under CreaLve Commons AOribuLon License