Flare HTML Help Guide

Transcription

Flare HTML Help Guide
MadCap Software
HTML Help Guide
Flare 11
Copyright 2015 MadCap Software. All rights reserved.
Information in this document is subject to change without notice. The software described in this document
is furnished under a license agreement or nondisclosure agreement. The software may be used or copied
only in accordance with the terms of those agreements. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or any means electronic or mechanical, including
photocopying and recording for any purpose other than the purchaser's personal use without the written permission of MadCap Software.
MadCap Software
7777 Fay Avenue
La Jolla, California 92037
858-320-0387
www.madcapsoftware.com
THIS GUIDE WAS CREATED USING MADCAP FLARE.
CONTENTS
CHAPTER 1 Introduction
5
CHAPTER 2 CSH Calls for HTML Help
7
What You Need to Do
CSH Calls for HTML Help—Developers
8
9
CHAPTER 3 Linking Tasks for HTML Help
Linking to CHM Files
Merging Output from HTML Help Projects (CHM Files)
Selecting an Icon for a TOC Entry in HTML Help Output
Selecting an Icon for a Browse Sequence Entry in HTML Help
Output
CHAPTER 4 Skin Tasks for HTML Help
Adding a Web Toolbar to HTML Help
Specifying Web Toolbar Settings—HTML Help Output
Specifying Buttons for HTML Help Output
Specifying Navigation Pane Settings for HTML Help Output
Specifying How the TOC Looks in HTML Help Output
Enabling User-Defined Window Position and Size for HTML
Help Output
Including Bookmarks in Index Entries
CHAPTER 5 Target Tasks for HTML Help
Displaying Merged Navigation in HTML Help Child Outputs
11
12
13
18
19
21
22
23
32
35
36
37
38
39
40
Patching Stylesheets and Image Links for HTML Help
APPENDIX A PDF Guides
43
APPENDIX B Output Type Comparison Tables
45
General
Accessibility
Context-sensitive Help
Feedback Statistics and Reporting Features
Generated Content
Glossaries
Images
Indexes
Language Support
Master Pages and Page Layouts
Merging Output
Miscellaneous Features
Multimedia
Navigation Links
Pulse (Socially Enabled Output)
Search
Skins
Tables of Contents and Mini-TOCs
Target Settings
Variables
iv
42
47
48
49
50
51
54
55
56
57
58
59
60
62
66
67
68
74
77
78
80
CHAPTER 1
Introduction
Microsoft HTML Help is an HTML-based Help format that runs on Windows 32-bit platforms
and requires Internet Explorer on the end users' systems. You can use Microsoft HTML
Help to create Help for Windows desktop applications.
The Microsoft HTML Help output consists of a single CHM file that you will distribute to
users.
Following are some of the key features of the Microsoft HTML Help format:
32-bit Windows Application Support
Internet Explorer Support
Local This format is a good choice if you want users to store and open the output locally, rather than from a server, such as a website.
Single File This format is a good choice if you want to create output that has just one
file.
Note: Your users need Internet Explorer (4.0 or later) installed and a 32-bit Windows operating system (Windows 95 or later).
6
CHAPTER 2
CSH Calls for HTML Help
You can work with your developer to map an HTML Help system to a software application.
The developer can either connect the application directly to the HTML Help system or use
context-sensitive Help (CSH) calls to map specific Help topics to the specific user interface
elements:
Basic Help The developer can connect the application to your basic HTML Help output, rather than to a specific topic. The Help will open in the HTML Help viewer, displaying the startup topic that you designate and the navigation elements that you
include.
Context-sensitive Help (CSH) The developer can use CSH to connect the application to specific topics in the HTML Help output (as long as you have created CSH in
your Flare project and share the header file information with the developer).
This chapter discusses the following:
What You Need to Do
CSH Calls for HTML Help—Developers
8
9
What You Need to Do
1. Work with your developer to determine how you want to connect the Help to the application (basic
Help, CSH, or both).
2. Create and build your Microsoft HTML Help project in Flare.
3. Provide the developer with the output files, as well as the CSH header file (if you plan to use CSH).
4. Provide the developer with the information in the following topic: "CSH Calls for HTML Help—
Developers" on the next page.
8
CSH Calls for HTML Help—Developers
Information for Developers
Use the following information to connect Microsoft HTML Help to an application:
Use the following syntax to call a topic using a map number:
HWND HtmlHelp(Window(), “c:\path\MyHelp.chm”, HH_HELP_CONTEXT,
Number);
Use the following syntax to call a topic using a file name:
HWND HtmlHelp (Window(), “c:\path\MyHelp.chm”, HH_DISPLAY_TOPIC,
"welcome.htm");
To hook context-sensitive Help (CSH) to an application, the code looks something like this:
HtmlHelp(hWnd, /*Window handle of program or dialog*/
"CSHHelp.chm", /*Name of the CHM file*/
HH_HELP_CONTEXT,
dwMapNumber); /*Number from header file*/
CHAPTER 2│HTML Help Guide
9
Name
Description
HtmlHelp
This is the window handle of a program or dialog. A window handle helps identify a
(hWnd
window so the HTML Help engine knows which application is performing the specific
action.
MyHelp.chm
This is the name of a compiled HTML Help file (CHM) that includes the CSH. The
actual name of the CHM file is determined by the Help author.
HH_HELP_
This is the command sent to the HTML Help engine for window-level Help.
CONTEXT
dwMapNumber) A map number from the header file.
10
CHAPTER 3
Linking Tasks for HTML Help
There are various linking tasks unique to Microsoft HTML Help output that you can perform.
This chapter discusses the following:
Linking to CHM Files
Merging Output from HTML Help Projects (CHM Files)
Selecting an Icon for a TOC Entry in HTML Help Output
Selecting an Icon for a Browse Sequence Entry in HTML Help Output
12
13
18
19
Linking to CHM Files
You can include a CHM file in the TOC in your project so that it can be opened in your output.
If you do this when generating Microsoft HTML Help, the linked CHM will be merged with the TOC in the
project.
If you do this when generating DotNet Help, HTML5, WebHelp, WebHelp AIR, WebHelp Mobile, or
WebHelp Plus, the user will be able to download the CHM.
Regardless of the type of online output you are generating, you can find the steps for linking to a CHM file in
the following topic: "Merging Output from HTML Help Projects (CHM Files)" on the next page.
Note: Links to CHM files can be configured in two ways. First, links can point to the CHM file in
general. Second, they can point to a specific topic within the CHM. The first method is supported
in all of the online outputs mentioned above. The second method is supported only in Microsoft
HTML Help output.
12
Merging Output from HTML Help Projects (CHM Files)
Use this merging method if you are developing Microsoft HTML Help (a CHM file) and you want to merge
your output with another CHM file. This method is useful, for example, if another author is working on the
external Microsoft HTML Help project to which you are linking and you only have access to the other CHM
file (not the project files).
You can merge your output with another CHM file that you have already brought into your project (perhaps
via the external resources feature), or you can select a CHM file located elsewhere, in which case a copy
of it is added to your project.
HOW TO MERGE OUTPUT FROM HTML PROJECTS
1. Open the TOC in the Flare project that will serve as the parent project.
Note: You can also merge projects by linking them from a browse sequence, as well as
from a TOC. If you want to do this, simply follow these same steps after opening your
browse sequence.
2. Do one of the following:
In the TOC Editor, select the TOC entry or book where you want to link the output from the
child HTML Help project. (The TOC of the linked CHM file will be inserted at that spot in the parent TOC.)
OR
If the CHM file already exists somewhere in your project, you can open the Content Explorer
and drag the CHM file to the location in the "master" TOC where you want to place it. If you
use this method, the link will not point to any particular topic in the CHM file. Also, if you use
this method, you do not need to complete the rest of the steps below.
3. In the local toolbar of the TOC Editor, click
. The Properties dialog opens.
4. On the General tab, click Select HTML Help. The Link to HTML Help dialog opens.
CHAPTER 3│HTML Help Guide
13
5. Do one of the following:
If the child CHM file is already in your project Select Project Files and then use the area
below to navigate to the file that you want to link to and select it. By using the buttons in the
local toolbar, you can view all files in a list, view files in their folder structure, and use other
options.
Shows or hides the folders that the files are stored in.
Shows or hides the files. If you click this button when the Show Folders button
is
selected, the area splits into two halves. The folder is shown on the left side, and the
files and subfolders within it are shown on the right.
If the child CHM file is not yet in your project Select Import Existing. In the dialog that
opens, find and double-click the child CHM file. Then from the drop-down—which displays "
(root folder)" by default, you can select a specific content folder in your project to place the
child CHM file.
6. (Optional) If you want to point to a specific topic in the child CHM file, in the Topic field click
. In
the dialog that opens, find and double-click the topic that you want to link to.
If you use this option, only the specified topic will be included in the TOC, as opposed to the entire
TOC of the child CHM. However, even though just one topic will be included in the merged TOC, the
other topics in it will still be included in the output and you can get to them through other means (e.g.,
clicking hyperlinks).
7. Click OK in the Link to HTML Help dialog.
8. If you imported a child CHM file, the Copy to Project dialog opens. You can select Keep file synchronized (create mapping). This creates a link (map) between the original file and the copy being
added to your project. Then click OK in the Copy to Project dialog.
14
9. (Optional) If you want the merged TOC to replace the entry that you selected, do the following.
a. Select the Advanced tab.
b. Click the check box labeled When merging, replace node with merged TOC.
For example, you might have a TOC in your parent project that looks like this:
If you select the option in this step to replace the node, the merged TOC would look like this in the
output:
CHAPTER 3│HTML Help Guide
15
And if you do not select this option, your merged TOC would look like this:
10. In the Properties dialog, click OK.
Note: There are occasions when projects cannot be merged because the file name is the same in
two or more of the linked projects (e.g., multiple DotNet Help projects all named "MyDotNetProject.mchelp," multiple WebHelp projects all named "MyWebProject.mcwebhelp," or multiple
Microsoft HTML Help projects all named "MyHtmlHelp.chm"). The way to solve this dilemma is to
make sure each linked project has a different output file name. To do this: (1) open the target, (2)
select the General tab in the Target Editor, and (3) enter a unique name in the Output File field.
Note: If you are working with HTML Help and import a RoboHelp project that has been merged
with other CHM files, the linked CHM files are placed in a special subfolder in the Content
Explorer (Resources\CHMSupport).
Note: You can also link to CHM files from the TOC in DotNet Help and all WebHelp outputs
(HTML5, WebHelp, WebHelp AIR, WebHelp Mobile, and WebHelp Plus). However, linking to a
specific topic within the CHM is not supported in these outputs. See "Linking to CHM Files" on
page 12.
16
Note: You can merge HTML Help so that the navigation (table of contents, index, search) for each
CHM file is displayed, regardless of which CHM file you open (parent or child). This can be done
in a couple of ways, depending on whether you have access to all of the Flare projects or to the
CHM files only. See "Displaying Merged Navigation in HTML Help Child Outputs" on page 40.
CHAPTER 3│HTML Help Guide
17
Selecting an Icon for a TOC Entry in HTML Help Output
You can select an icon to use for a particular TOC entry in HTML Help output.
HOW TO SELECT AN ICON FOR A TOC ENTRY IN HTML HELP OUTPUT
1. Open the table of contents.
2. Select an entry in the TOC. You can hold the SHIFT key to select a range, or you can hold the
CTRL key to select individual items.
3. In the local toolbar, click
. The Properties dialog opens.
4. Select the Advanced tab.
5. In the HTML Help Icon field, select one of the icons from the drop-down.
6. In the Properties dialog, click OK.
7. Click
18
to save your work.
Selecting an Icon for a Browse Sequence Entry in HTML
Help Output
You can select an icon to use for a particular browse sequence entry in HTML Help output.
HOW TO SELECT AN ICON FOR A BROWSE SEQUENCE ENTRY IN HTML HELP OUTPUT
1. Open the browse sequence.
2. Select an entry in the browse sequence. You can hold the SHIFT key to select a range, or you can
hold the CTRL key to select individual items.
3. In the local toolbar, click
. The Properties dialog opens.
4. Select the Advanced tab.
5. In the HTML Help Icon field, select one of the icons from the drop-down.
6. In the Properties dialog, click OK.
7. Click
to save your work.
CHAPTER 3│HTML Help Guide
19
20
CHAPTER 4
Skin Tasks for HTML Help
There are various skin-related tasks unique to Microsoft HTML Help output that you can perform.
This chapter discusses the following:
Adding a Web Toolbar to HTML Help
Specifying Web Toolbar Settings—HTML Help Output
Specifying Buttons for HTML Help Output
Specifying Navigation Pane Settings for HTML Help Output
Specifying How the TOC Looks in HTML Help Output
Enabling User-Defined Window Position and Size for HTML Help Output
Including Bookmarks in Index Entries
22
23
32
35
36
37
38
Adding a Web Toolbar to HTML Help
If you incorporate MadCap Feedback into your Flare project and generate Microsoft HTML Help output, a
web toolbar is automatically added to the top of each topic in the CHM file. However, this toolbar is not only
for MadCap Feedback. Even if you are not using Feedback in your project, you can add the web toolbar to
your Microsoft HTML Help output.
In addition to submitting topic ratings and comments, the default buttons in the web toolbar let users
expand or collapse Dynamic HTML effects (e.g., drop-down text, expanding text), search, go to the next or
previous topic, and more. You can change the buttons included in the web toolbar, removing ones you do
not want and adding others. See "Specifying Web Toolbar Settings—HTML Help Output" on the next page.
HOW TO ADD A WEB TOOLBAR TO HTML HELP OUTPUT
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. Click Display toolbar in each topic.
4. Click
to save your work.
Note: You can also specify which buttons should be included in the navigation toolbar at the top of
the CHM window. See "Specifying Buttons for HTML Help Output" on page 32.
Note: As an alternative, you can add a web toolbar with the help of a topic toolbar proxy. This
allows you to add a toolbar in specific places within topics, as well as limit the topics that have the
toolbar.
22
Specifying Web Toolbar Settings—HTML Help Output
If you incorporate MadCap Feedback into your Flare project and generate Microsoft HTML Help output, a
web toolbar is automatically added to the top of each topic in the CHM file. However, this toolbar is not only
for MadCap Feedback. Even if you are not using Feedback in your project, you can add the web toolbar to
your Microsoft HTML Help output. See "Adding a Web Toolbar to HTML Help" on the previous page.
In addition to submitting topic ratings and comments, the default buttons in the web toolbar let users
expand or collapse Dynamic HTML effects (e.g., drop-down text, expanding text), search, go to the next or
previous topic, and more. You can change the buttons included in the web toolbar, removing ones you do
not want and adding others.
HOW TO SPECIFY CUSTOM TOOLBAR SETTINGS FOR MICROSOFT HTML HELP OUTPUT
After adding the web toolbar for Microsoft HTML Help output, complete the following steps.
1. Open a Standard skin.
2. Select the WebHelp Toolbar tab.
3. Select options to include specific features (buttons) in the toolbar. Items that will be included in the
toolbar are displayed in the Selected section on the right. Items that will not be included in the toolbar are displayed in the Available section on the left. You can use the right arrow button to move
items from the Available section to the Selected section.
Below are descriptions of the various items.
BACK
Lets users open the topic that was viewed previously.
CHAPTER 4│HTML Help Guide
23
COLLAPSE ALL
Lets users collapse all elements such as togglers, drop-down effects, and expanding text effects in
a topic (if they are expanded).
CURRENT TOPIC INDEX
Lets users see the display for the current topic in the sequence. This is typically used in conjunction
with the "Next Topic" and "Previous Topic" buttons when the topic in question exists in a browse
sequence. Flare finds the current topic in a browse sequence and display its position in relation to
the rest of the topics in that sequence. (The root node is used to determine the count; in other words,
if there are "child" topics in the sequence structure under the current topic, they will be included in
the count.)
EDIT USER PROFILE
Lets users edit their Pulse or Feedback registration profile settings.
24
EXPAND ALL
Lets users expand all elements such as togglers, drop-down effects, and expanding text effects in a
topic (if they are not yet expanded).
FORWARD
Lets users open the next topic in a previously viewed sequence.
HOME
Lets users open a designated home page (such as your company's website).
NEXT TOPIC
Lets users open the next topic in the sequence. First, Flare attempts to find the current topic in a
browse sequence and navigate to the next topic from there. If you do not have a browse sequence,
Flare looks at the position of the current topic in your table of contents (TOC) and opens the next
topic after it.
CHAPTER 4│HTML Help Guide
25
PREVIOUS TOPIC
Lets users open the previous topic in the sequence. First, Flare attempts to find the current topic in a
browse sequence and navigate to the previous topic from there. If you do not have a browse
sequence, Flare looks at the position of the current topic in your table of contents (TOC) and opens
the previous topic before it.
PRINT
Lets users open the Print dialog so that they can send the open topic to the printer.
QUICK SEARCH
Lets users initiate a search in the active topic for the word or phrase that has been typed in the field
next to the button.
26
REFRESH
Lets users update the content of the topic being viewed.
REMOVE HIGHLIGHT
After a user performs a quick search in a topic, the search text found in the topic is highlighted. This
button lets users turn the highlights off.
STOP
Lets users prevent a page from downloading file information.
CHAPTER 4│HTML Help Guide
27
TOPIC RATINGS
Lets users submit ratings for a topic (if you have incorporated your output with MadCap Pulse or
Feedback).
4. (Optional) You can use the buttons at the bottom of the tab to perform additional tasks.
28
Opens the New Toolbar Button dialog, which lets you add a custom button to the toolbar.
After creating the custom button, select it and click to move it to the Selected section.
Unless you specify otherwise, in the output the new button will display the text for the
name you gave it. However, you can change this by editing the control type for the new
button. To do this, you can select the Styles tab in the Skin Editor, expand the Toolbar
Item node, select one of the styles listed above, expand the Type property group, and
from the Control Type field select Button. To choose an image for the button, expand
the General property group on the Styles tab and select image files in the Icon fields.
If you want to provide a command for the custom button (e.g., so that clicking the button
opens a website), you can select the Styles tab in the Skin Editor, expand the Toolbar
Item node, select one of the styles listed above, expand the Type property group, and
enter a command in the OnClick field. For example, the following command opens the
MadCap Software website when a user clicks the button:
window.open("http://www.madcapsoftware.com");
Alternatively, you can use the JavaScript area on the WebHelp Toolbar tab to enter a command for the button. See the next step.
Removes the selected custom button from the Available section.
CHAPTER 4│HTML Help Guide
29
Moves the selected item up in the order in the Selected section. In the output, buttons are
displayed left to right according to the order in which they appear on this tab, with the item
at the top being the first button shown on the left in the output.
Moves the selected item down in the order in the Selected section.
Removes the selected item(s) from the Selected section.
Adds a separator to the Selected section. A separator is the divider between the toolbar
buttons and the navigation pane.
Resets the toolbar to the default settings.
5. (Optional) If you want to include custom JavaScript in the toolbar, click Edit in the area to the right.
This opens the Toolbar JavaScript dialog, which you can use to enter or load custom JavaScript for
the toolbar.
For example, the following command opens the MadCap Software website when a user clicks the
button:
function MyFunction()
{
window.open("http://www.madcapsoftware.com");
}
6. Click
30
to save your work.
Note: You can also specify which buttons should be included in the navigation toolbar at the top of
the CHM window. See "Specifying Buttons for HTML Help Output" on the next page.
Note: You can also add a web toolbar that is displayed within topic content. This can be done with
the help of a topic toolbar proxy.
CHAPTER 4│HTML Help Guide
31
Specifying Buttons for HTML Help Output
You can select the Help buttons that you would like to include in the output window (e.g., Hide, Forward,
Back, Print, customized buttons).
HOW TO SPECIFY BUTTONS FOR HTML HELP OUTPUT
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. In the Html Help Buttons section, select the buttons that you want to include in the output window.
Hide Opens and closes the navigation pane.
Locate Synchronizes the TOC with the current topic (identifying the location of the current
topic in the TOC hierarchy). This is different from the option "Automatically Synchronize TOC"
on the General tab. This option is a manual method (requires action from the user), where as
the other option is automatic.
Back Opens the topic that was viewed previously.
Forward Opens the next topic in a previously viewed sequence.
Stop Prevents a page from downloading file information.
Refresh Updates the content of the topic being viewed.
Home Opens a designated home page (such as your company's website).
Font Opens a font selection popup. You can choose a typeface from among those listed in the
left panel. The base size can be selected in the right panel. There are two separate font families used by the viewer: the normal, proportional-spaced font, and a fixed-pitch font for preformatted and "typewriter" text. The latter does not actually have to be fixed-pitch; however,
preformatted columns will not line up unless this is so. Pressing Apply Font will set the currently selected font as the viewer's proportional font, and Apply Fixed Font will set the currently selected font as the viewers "fixed" font. In either case, the display will be redrawn using
the new font. The new font selection will be updated in the .mozyrc file if it exists, so that subsequent windows will use the new font.
Print From the Contents tab, prints pages, headings, and subtopics, or the entire TOC. From
the Index or Search tab, opens the Print dialog for printing the current topic.
32
Next Opens the next topic in the TOC. In order to include this button in the output, you must
also make sure Binary TOC and Binary Index are selected (use the TOC Options and Index
Options buttons). Please note that these buttons may not work correctly if the topic file names
contain spaces.
Previous Opens the previous topic in the TOC. In order to include this button in the output, you
must also make sure Binary TOC and Binary Index are selected (use the TOC Options and
Index Options buttons). Please note that these buttons may not work correctly if the topic file
names contain spaces.
Options Opens a menu that provides access to Home, Show, Back, Stop, Refresh, and
Search Highlight On/Off.
Jump1 Opens a customized destination. You can use this to let users open a website (defined
with a URL) or a Help topic (defined by its file name if included in the same CHM file). You can
specify the destination and label for the button by selecting Jump Button Options.
Jump2 Opens a customized destination. You can use this to let users open a website (defined
with a URL) or a Help topic (defined by its file name if included in the same CHM file). You can
specify the destination and label for the button by selecting Jump Button Options.
4. If you want to include labels below each of the buttons in the output, select Display button captions.
5. If you selected the "Jump1" or "Jump2" button options, click Jump Button Options to specify the
button text and destination. In the HTML Help Jump Button Options dialog, enter the appropriate destination URL (e.g., http://www.acme.com) in the Jump1 URL and/or Jump2 URL fields. Then
enter the label for the button in the appropriate Button text field. When you are finished, click OK to
close the dialog. (Make sure Display button captions is selected so that users can see the button
text.)
CHAPTER 4│HTML Help Guide
33
Note: You can also set the jump button options on the General tab in the Target Editor. The
reason these button options are available in both the Skin Editor and Target Editor is this: If
you want multiple targets to use one skin, with each target using the same destinations for
the jump buttons, you should set the jump button URLs in the Skin Editor. If you want multiple targets to use the same skin, but you want them to use different URLs for the jump buttons, set the URLs in the Target Editor. If URLs are set in both the Skin Editor and the
Target Editor, Flare uses the settings from the Skin Editor.
6. Click
34
to save your work.
Specifying Navigation Pane Settings for HTML Help Output
You can specify navigation pane settings for Microsoft HTML Help output. This includes setting the width
of the navigation pane and determining whether it shown or hidden under different circumstances. The navigation pane is used to hold elements such as TOCs and indexes.
HOW TO SPECIFY NAVIGATION PANE SETTINGS FOR HTML HELP OUTPUT
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. In the Navigation Pane Options area, select the appropriate options.
Hide Navigation Pane on Startup Hides the navigation pane when the user opens the Help
window. If you select "Hide" in the Html Help Buttons section, the user can display the navigation pane by clicking on the Hide/Show button in the toolbar.
Automatically show/hide Navigation Pane Automatically hides the navigation pane when
users switch focus from the HTML Help viewer to a software program. The topic content
remains visible, but the navigation pane is temporarily closed from view. The navigation pane
is displayed again as soon as the HTML Help viewer is clicked.
Navigation Pane Width Enter the width of the navigation pane for the output window (in
pixels). You can type a number or use the up and down arrows.
4. Click
to save your work.
CHAPTER 4│HTML Help Guide
35
Specifying How the TOC Looks in HTML Help Output
You can specify the look and feel of your table of contents (TOC). This includes adding plus/minus squares
next to entries, changing the book/folder icons, adding border around the TOC, and more.
HOW TO SPECIFY THE WAY THE TOC LOOKS IN HTML HELP OUTPUT
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. Click the TOC Options button.
4. In the HTML Help TOC Options dialog, select the appropriate options. The "Preview" area at the bottom of the dialog changes as you make selections. Click the OK button when you are finished.
Lines between items Displays dotted lines, showing the connections between TOC books
and entries.
Lines from root Displays lines connecting TOC books and entries starting at the root.
Plus/minus squaresDisplays plus and minus squares that open and close TOC books when
clicked.
Single click to open books Formats TOC books to open with a single click. If this option is
not selected, books open with a double-click.
Use folder icons for books Displays a folder icon instead of a book icon for TOC book
entries.
Always show the selection Shows the selected entry even if the TOC tab is not the currently
selected item (does not have focus).
Binary For large compiled Microsoft HTML Help projects, a binary TOC reduces the amount of
time it takes to load a TOC by creating a binary contents file. This feature does not support custom TOC icons or other customizations such as displaying topics in custom windows.
No border Creates the TOC without adding a border around the TOC pane.
Simple border Adds a single line border around the TOC pane.
3D border Adds a border around the TOC pane that has a 3D appearance.
5. Click
36
to save your work.
Enabling User-Defined Window Position and Size for
HTML Help Output
You can let end users control the position and size of the output window by using an option on the HTML
Help Setup tab of the Skin Editor. This option causes an HTML Help (CHM) file to save its window position
and size after its first use. The next time, it will open at the same window position and size.
HOW TO ENABLE USER-DEFINED WINDOW POSITION AND SIZE FOR HTML HELP OUTPUT
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. Click Save user defined window position after first use.
4. Click
to save your work.
CHAPTER 4│HTML Help Guide
37
Including Bookmarks in Index Entries
If you want index term links to point to the exact spot in the topic where the index marker has been set, you
need to specify this in the Skin Editor. Otherwise, the index term links will point to the topic in general.
However, by pointing to the individual index markers, the index may not display the way you want if the
index term points to multiple topics and you also have created a binary index . In other words, index entries
pointing to multiple topics will display the index terms repeated instead of the topic title. A workaround is to
deselect the binary index option in the Skin Editor. However, keep in mind that a binary index is required if
you want to merge CHM files.
HOW TO INCLUDE BOOKMARKS IN INDEX ENTRIES
1. Open a Standard skin.
2. Select the HTML Help Setup tab.
3. Click the Index Options button.
4. In the HTML Help Index Options dialog, select Include bookmarks with index entries.
5. Click OK.
6. Click
38
to save your work.
CHAPTER 5
Target Tasks for HTML Help
There are various target-related tasks unique to Microsoft HTML Help output that you can
perform.
This chapter discusses the following:
Displaying Merged Navigation in HTML Help Child Outputs
Patching Stylesheets and Image Links for HTML Help
40
42
Displaying Merged Navigation in HTML Help Child Outputs
You can merge HTML Help so that the navigation (table of contents, index, search) for each CHM file is displayed, regardless of which CHM file you open (parent or child). This can be done in a couple of ways,
depending on whether you have access to all of the Flare projects or to the CHM files only.
HOW TO DISPLAY MERGED NAVIGATION IN HTML HELP—ACCESS TO ALL FLARE
PROJECTS
1. Open the target to be used as the parent CHM.
2. On the Advanced tab of the Target Editor, select Display merged navigation in HTML Help.
3. Click
to save your work.
4. Follow the steps for merging based on HTML Help targets. For more information see the Flare online
Help.
5. Generate the parent HTML Help target.
The parent CHM file and all child CHM files are located in the same output folder, and when you
open any of those CHM files, you can see the navigation for any of the other outputs.
40
HOW TO DISPLAY MERGED NAVIGATION IN HTML HELP—ACCESS TO CHM FILES ONLY
Use this method if you do not have access to all of the Flare projects, but you do know the names of the
other CHM files that will be created. This method is more of a manual setup and is useful if you are part of a
team where different authors have access to different Flare projects that need to be merged. This method
also lets you add or remove child CHM files without needing to recompile the parent project.
1. The author for each project (parent and child) places a simple TXT file named merge.txt in the same
folder where the Flare project file (.flprj) is located. This TXT file can be created with Notepad and
should simply list the names of all CHM files to be included in the merged output (one on each line),
with the name of the parent CHM appearing first.
EXAMPLE
MyParent.chm
MyFirstChild.chm
MySecondChild.chm
MyThirdChild.chm
2. The author for each child project generates his output and provides the author of the parent project
with the CHM file(s).
3. The author for the parent project brings the child CHM files into the parent project and follows the
steps for merging based on CHM files. See "Merging Output from HTML Help Projects (CHM Files)"
on page 13.
4. The author for the parent project generates the main HTML Help target.
The parent CHM file and all child CHM files are located in the same output folder, and when you
open any of those CHM files, you can see the navigation for any of the other outputs.
CHAPTER 5│HTML Help Guide
41
Patching Stylesheets and Image Links for HTML Help
If you generate Microsoft HTML Help output, some topics may not look as intended when they are printed
from the CHM file, due to stylesheet-related problems. You can use this feature to "patch" those problems,
ensuring the printed topics will look as intended.
Why would you not use this option? The only reason not to use this option is when you plan to rename the
generated CHM file. If this option is enabled and you rename the CHM file, styles in the output are broken.
This happens because, when the option is enabled, the file name of the CHM is hardcoded into the CHM
itself.
HOW TO PATCH STYLESHEETS AND IMAGE LINKS FOR HTML HELP
1. Open a target.
2. On the Advanced tab of the Target Editor, select Patch stylesheet and image links for HTML
Help printing.
3. Click
42
to save your work.
APPENDIX A
PDF Guides
The following PDF guides are available for download from the online Help:
Accessibility Guide
Key Features Guide
Analyzer Guide
Language Support Guide
Autonumbers Guide
Movies Guide
Condition Tags Guide
Navigation Links Guide
Context-sensitive Help Guide
Print-based Output Guide
DotNet Help Guide
Project Creation Guide
Eclipse Help Guide
Pulse Guide
Getting Started Guide
QR Codes Guide
Global Project Linking Guide
Reports Guide
HTML Help Guide
Reviews & Contributions Guide
HTML5 Guide
Search Guide
Images Guide
SharePoint Guide
Importing Guide
Shortcuts Guide
Index Guide
Skins Guide
Snippets Guide
Templates Guide
Source Control Guide: Git
Topics Guide
Source Control Guide: Perforce
Touring the Workspace Guide
Source Control Guide: Subversion
Transition From FrameMaker Guide
Source Control Guide: Team Foundation Server Tutorials Guide: Product Foldout 3-Fold Template
44
Source Control Guide: Visual SourceSafe
Tutorials Guide: Top Navigation Adv Template
Styles Guide
Tutorials Guide: Tripane and PDF Adv Template
Tables Guide
Variables Guide
Tables of Contents Guide
WebHelp Outputs Guide
Targets Guide
What's New Guide
APPENDIX B
Output Type Comparison Tables
Following are tables that show the various output types available, with the distinguishing features of each.
This chapter discusses the following:
General
Accessibility
Context-sensitive Help
Feedback Statistics and Reporting Features
Generated Content
Glossaries
Images
Indexes
Language Support
Master Pages and Page Layouts
Merging Output
Miscellaneous Features
Multimedia
Navigation Links
Pulse (Socially Enabled Output)
47
48
49
50
51
54
55
56
57
58
59
60
62
66
67
Search
Skins
Tables of Contents and Mini-TOCs
Target Settings
Variables
68
74
77
78
80
Note: If an item does not have a check mark, that does not necessarily mean the feature is unavailable in the output. Rather, it means that the feature cannot
be added in Flare. For example, search cannot be added in Flare for EPUB output, but some ebook readers may have search built in.
46
General
Following are general features supported in each output type:
.NET Integration
Responsive Output
Single Output File Possible
APPENDIX B │HTML Help Guide
47
Accessibility
Following are accessibility features (e.g., Section 508, WCAG) supported in each output type:
Accessibility Supported
Compiler Warnings
Empty Alt Text for Images
Scrolling for Toolbars and Navigation Frames—Enable
48
Context-sensitive Help
Following are context-sensitive Help (CSH) features supported in each output type:
CSH Supported
Embedded CSH Supported
APPENDIX B │HTML Help Guide
49
Feedback Statistics and Reporting Features
Following are Feedback statistics and reporting features supported in each output type:
Feedback Supported
Search Results
50
Generated Content
Following are generated content features supported in each output type:
Autonumbers1
Breadcrumbs
Browse Sequences
Concept Links
Keyword Links
Glossaries from
Proxies
Indexes from Proxies
List of Concepts
List of Elements
List of Endnotes
APPENDIX B │HTML Help Guide
51
Lists (Numbered
and Bulleted)
Menus from Proxies
Mini-TOCs from
Proxies
Page Numbers
Related Topics
Links
Relationship Links
Scripts
Search Bars from
Proxies
Search Results
from Proxies
Shortcut Controls
52
TOCs from Proxies
Topic Toolbars
from Proxies
1It
is possible to use autonumbering in online outputs, but only in a limited way. For example, if you have notes throughout your project, you can
create an autonumber format on a paragraph style class that simply has the text "Note:" followed by a space. Then whenever you want to apply that
style class to note content, it will automatically start with "Note:" so that you don't have to type it each time. However, in the traditional sense
where autonumbering is used to increment numbers for elements such as chapters, figures, and tables, it is really only intended for print-based
outputs.
2In
HTML5, the proxies and related skin components for search bars and search results are supported only in Top Navigation output, as well as in
targets not using a skin. They are not supported in Tripane output.
APPENDIX B │HTML Help Guide
53
Glossaries
Following are glossary features supported in each output type:
Glossaries—Created via Glossary File and Proxy
Glossaries—Created via Glossary File and Skin Setting
Auto-generate
54
Images
Following are image features supported in each output type:
Absolute Positioning
Image Hyperlinks
Image Maps
Pre-Compile Resized
Thumbnail Images
Web-Safe—Convert from Non—Web-safe
APPENDIX B │HTML Help Guide
55
Indexes
Following are index features supported in each output type:
Indexes—Created Using Keywords and Proxy
Indexes—Created Using Keywords and Skin Setting
Auto-generate
Binary Indexes
Bookmarks in Index Entries
Index Links
Search—Can Exclude Index Entries from Search
56
Language Support
Following are language support features supported in each output type:
Author and Generate Output in Left-to-Right (LTR) and Right-to-Left
(RTL) Languages
Invert Image Callouts to RTL
Invert Page Layouts to RTL
Invert Styles to RTL
Output Interface—Display in LTR and RTL
Output Interface—Display English, French, Japanese, or German
Language Skins
Separate UI Text tab in Skin Editor for Localization
1This
is controlled on the UI Text tab in a regular HTML5 skin.
2This
is controlled in a language skin.
3This
is possible with the MadCap Help Viewer, where the end user selects the language.
APPENDIX B │HTML Help Guide
57
Master Pages and Page Layouts
Following are master page and page layout features supported in each output type:
Master Pages Supported
Page Layouts Supported
58
Merging Output
Following are merging output features supported in each output type:
Merge Output Supported
Merge Output at Runtime
1
Flare's HTML5 Top Navigation skin does not support project merging.
2
HTML5 outputs do not support pre-merging.
APPENDIX B │HTML Help Guide
59
Miscellaneous Features
Following are miscellaneous features supported in each output type:
Augmented Reality
Equations
Footnotes
Horizontal Rules
Object Positioning
PDF Stitching
QR Codes
Preview Topics in Output Type
Redacted Text
Slideshows
Snippets
Tables
60
Text Boxes
1Footnotes
are converted to popups.
APPENDIX B │HTML Help Guide
61
Multimedia
Following are multimedia features supported in each output type:
3D Models (U3D
Files)
Audio and Video Files
ASF
ASX
AU
AVI3
M4V3
MID
MIDI
MP3
MP43
62
MPA
MPE
MPEG
MPG
OGG3
OGV3
OPUS
SWF
WAV
WEBM3
WMA
WMV
MadCap Mimic Movie Links
APPENDIX B │HTML Help Guide
63
Flash (SWF)
Format
HTML5 Format
(Depending on
Browser) 3
Mimic Movie
Format
Silverlight
Format
Vimeo Embedded Videos
64
YouTube
Embedded
Videos
1Support
for each element or file type depends on if a particular browser supports it. This is especially true with WebHelp mobile output and
mobile browsers.
2For
3To
4If
this output, the 3D Model opens in a separate window.
view HTML5 movie output, end users must have a newer browser that supports these types of videos.
you generate DotNet Help, embedded HTML5 movies are not supported out of the box. That's because DotNet Help uses Internet Explorer 7,
which does not support HTML5 movies. However, you can make it work by adding the default meta tag to your target: <meta http-equiv="X-UACompatible" content="IE=Edge" />.
5This
6If
file format does not work in Internet Explorer.
you generate DotNet Help or Microsoft HTML Help, YouTube videos are rendered smaller than in other outputs and Vimeo Advanced settings
are not supported. However, you can make it work by adding the default meta tag to your target: <meta http-equiv="X-UA-Compatible" content="IE=Edge" />.
APPENDIX B │HTML Help Guide
65
Navigation Links
Following are navigation link features supported in each output type:
Cross-References Supported
Cross-References—Context-sensitive
Drop-down Text
Expanding Text
Text Hyperlinks
Text Popups
Togglers
Topic Popups
66
Pulse (Socially Enabled Output)
Following are Pulse features supported in each output type:
Pulse Integration
APPENDIX B │HTML Help Guide
67
Search
Following are search features supported in each online output type.
General Support
The table below summarizes search support in each output type:
Search Supported Via Flare Integration
68
End User Search Features
The table below summarizes the key search features and capabilities for each output type. With HTML5 and WebHelp outputs, you can distribute either client- or
server-based outputs. This is why the table below lists them twice—under client- and server-based output.
End user search features are supported by the Eclipse Help Viewer and search operations are provided by a plug-in that you develop using the Eclipse platform (for
more information, see org.eclipse.help.ui.searchEngine). The Flare search engine does not handle Eclipse Help search operations.
CLIENT-BASED OUTPUT
SERVER-BASED OUTPUT
Glossary Search—Find Matching Terms
Index Search—Find Matching Terms
Search Favorites—Save Queries to Favorites List
Search Query—Asterisk (*) Wildcard Character
Search Query—Boolean Operators
Search Query—Full-text Search (not case sensitive)
Search Query—Enclose Terms in Quotes (" ")
Search Results—Narrow Search Scope Using Search Filter Sets
APPENDIX B │HTML Help Guide
69
CLIENT-BASED OUTPUT
Search Results—Results Listed in Ranked Order and Show Rank Number
Search Results—Search Hits Highlighted in Topics
Search Results—Search Hits Bolded in Search Results
1Use
CTRL+F in the Glossary pane.
2SQL Server
3Select
the operator from the built-in list.
4Results
70
Compact is required.
are listed in order. Rank number is not visible.
SERVER-BASED OUTPUT
Content Developer Search Features
This table summarizes the key search features and capabilities that are available to you, the content developer, for each output type. With HTML5 and WebHelp outputs, you can distribute either client- or server-based outputs. This is why the table below lists them twice—under client- and server-based output.
CLIENT-BASED OUTPUT
SERVERBASED OUTPUT
Enable Search Feature
Search Highlighting—Set Highlight Color
Search Performance—Chunk Large Search Database Files
Search Performance—Enable Partial-word Searching and Set Minimum Word
Size
Search Performance—Enable Stop Words in Search
Search Performance—Exclude Index Entries from Search
Search Performance—Exclude Non-words from Search
Search Performance—Include SQL Search Database
APPENDIX B │HTML Help Guide
71
CLIENT-BASED OUTPUT
Search Performance—Pre-merge Search Database
Search Performance—Set N-Gram Size for Chinese, Japanese, and Korean Projects
Search Toolbar—Include and Customize a Quick Search Field and/or Select
Search Button
Search Results—Customize Order of Search Filter Sets
Content Optimization—Set Number of Results Displayed Per Page
Content Optimization—Enable or Disable Importance in Search Results
72
SERVERBASED OUTPUT
CLIENT-BASED OUTPUT
SERVERBASED OUTPUT
Content Optimization—Adjust Abstract Character Limit
1Search
cannot be disabled.
2Standard
skin.
3HTML5
skin.
4Mobile
skin.
5Stop
words are always enabled.
6Index
entries are always excluded.
7Non-words
are always excluded.
8SQL Server
Compact is required.
APPENDIX B │HTML Help Guide
73
Skins
Following are skin features supported in each output type:
Skin Type
About Box
Accordion Titles—Exclude
Browser Settings
Caption for Output Window
Elements (e.g., tabs, accordions)—Specify Default
Element
Elements (e.g., tabs, accordions)—Specify Which
to Include
Feedback Comments, Email Notifications, User Profile
Generate All
Language Skins
74
Standard
Standard
HTML5
Standard
Mobile
Standard
Standard
Menu Skin Component
Navigation Links in Standalone Topics
Navigation Pane Settings
Preview Skin for Output Type
Search Bar Skin Component
Search Results Skin Component
Separate UI Text Tab in Skin Editor for Localization
Styles
TOC Entry—Select Skin For
Topic Toolbar—Custom Settings
Web Toolbar—Add via Skin
Web Toolbar—Custom Settings
APPENDIX B │HTML Help Guide
75
Window—Size/Position
Window—User-Defined Size/Position
1This
is available in the Tripane skin only. It is not available in the Top Navigation skin.
2This
is handled through the org.eclipse.help.base plug-in.
3This
is available in the Top Navigation skin only. It is not available in the Tripane skin.
4Only
some styles (e.g., Feedback, toolbar) are supported.
5Topic
toolbar settings can be controlled in a Topic Toolbar skin component, as well as in a Topic Toolbar proxy.
6Limited
76
settings are available.
Tables of Contents and Mini-TOCs
Following are table of contents (TOC) and mini-TOC features supported in each output type:
TOCs—Created via Headings and Proxy
TOCs—Created via TOC File and Skin Setting
Auto-generate
Binary TOCs
Mark as New
Mini-TOCs
Skin—Select for TOC Entry
Synchronize With Topics
APPENDIX B │HTML Help Guide
77
Target Settings
Following are target features supported in each output type:
Auto-generate Glossary, Index, TOC
Characters and Spaces—Replace With Underscores
CMYK
Content Folder—Omit from Output
Crop and Registration Marks—Include in Output
DOCTYPE Declaration
Empty Pages—Inject Automatically
File Extensions—Custom
Mark of the Web
Meta Tags—Custom
Startup Topic
78
Stylesheet Medium
Warnings—Ignore
1We
recommend disabling this option for non-English content.
2The
standard mobile DOCTYPE is always used.
APPENDIX B │HTML Help Guide
79
Variables
Following are variable features supported in each output type:
Custom Variables
Heading Variables
Running HF Variables
System Variables
80