SECONDARY RAW MATERIALS MANAGEMENT

SECONDARY
RAW MATERIALS
MANAGEMENT
This service is especially relevant in regard to environment control, ecology and economy,
it is associated with future of waste management activity.
Secondary Raw Materials Management
Secondary raw materials include waste fit for recycling: tare, glass, plastic, metal, paper and
cardboard.
A service of secondary raw materials management is special not only in ecological and
economical aspect, but also due to the fact that this service is possible only with an active
contribution of the society. Therefore the joint-stock company “Ecoservice” is active in
holding social actions and supporting initiatives in which the society is informed about
waste sorting methods and significance of sorting. The society learns how to produce
new goods from the secondary raw materials, to save natural resources and energy,
reduce volumes of waste getting into dumps; society is also informed about the impact on
environment, deforestation, water and air pollution, costs of domestic waste management.
We give our clients information on how to sort waste, where and which kind of waste should be
thrown. Our specialists are always ready to help if any questions related to waste sorting arise.
up to
40
per cent
The amount you can save
when sorting the domestic
waste.
The joint-stock company “Ecoservice” offers to sort secondary raw materials in the places where
they are formed, so that as minimum as possible amounts of waste would get to dumps.
Collection of secondary raw materials from individual house areas
For individual house residents who are willing to sort domestic waste the joint-stock
company “Ecoservice” offers coloured sorting bags for free. The waste sorted into these
bags is regularly collected according to the schedule settled in advance.
25 kg
Collection of secondary raw materials from apartment houses
In apartment building areas and garage communities the company equips the secondary
raw material sorting sites. In these sites three containers for secondary raw materials are
placed: blue containers are used for paper, yellow – for plastic, and green containers – for
glass. All the used containers correspond with LST EN standard requirements. One set of
secondary raw material collection containers is placed for about 600 residents.
The amount of secondary
raw materials the average
household accumulates
per month.
Collection of secondary raw materials from private enterprises and institutions
We provide enterprises and institutions with all equipment needed to collect waste:
coloured plastic bags and aesthetically looking boxes made of corrugated plastic.
Furthermore, outside the enterprises and institutions we can place special containers
used to collect secondary raw materials. Containers are removed for free, according to the
schedule settled in advance.
Collection of secondary raw materials from manufacturers
Different production enterprises, commercial centres during their activity accumulate
huge amounts of paper, film, other secondary raw materials and different packing waste.
Therefore the joint-stock company “Ecoservice” offers such enterprises specific equipment
– pressing containers, big-sized mesh containers (up to 5 cbm) or metal containers (up to 30
cbm). Such kind of service enables enterprises to easily and safely accumulate waste.
WHY SORTING IS ESSENTIAL?
Waste sorting is not a choice, but a duty, as it helps:
• to save natural resources, water and electric power;
• to save place in dumps – they are not expanding so rapidly, there is no need to look for more and more areas and funds to equip them;
• to reduce waste management costs, as waste collection, removal and management is for free;
• to let things be reborn for a new life instead of rotting for several hundred yeas in the nearest landfill;
• to show that one is extremely concerned about in what kind of the world the future generation will live.
SORTS AND SELECTION OF CONTAINERS
The secondary raw material containers we offer to our customers are new and modern, waste is removed by special heavy goods
vehicles equipped with presses and container lifting mechanisms.
• Convenient and light.
• Resistant to UV rays,
temperature changes.
• Dimensions: 70x35x35 cm.
• Made of corrugated plastic.
• Two types of lids: with a waste
removal opening or airtight.
86 l
• Made of high-quality polythene.
• Bags of different thickness
and solidity, adjusted to only
certain kind of waste.
• Out of use, may be
totally recycled.
120 l
1,8–2,5 cbm
1,1 cbm
•
•
•
•
•
•
•
Resistant to UV rays, temperature changes.
Solid handles, easy to lift and transport.
Dimensions: 135 x 125 x 107 cm.
Rubber wheels, 20 cm in diameter, easily turning in all directions.
All the metal parts are galvanized and protected from corrosion.
Out of use, a container may be totally recycled.
Lids may have special round or rectangular openings to throw waste in.
• Bell-formed containers with a rounded bottom, opening outside.
• Made of glass plastic material, almost nonflammable, resistant
to blows, deformations, impact of atmosphere.
• Metal parts of a container are protected from corrosion.
• With a fixed loop, adjusted to lift by lifting mechanism with a hook,
and with an adjustable loop, used for automated opening.
• Dimensions: height – 160 cm, diameter – 174 cm.
• Containers are marked with labels “Glass”, “Paper” or
“Plastic” and waste throwing instructions.
• Out of use, a container may be totally dismantled.
• A container used for waste that
may be pressed (plastic, paper,
domestic waste, sawdust, etc.).
• Convenient in those enterprises
where more than 40 cbm of
waste is formed per week.
• Press must be plugged in.
• A container body may be made
of metal sheets or metal mesh.
• Solid, protected form
corrosion, resistant to
temperature changes.
• Extremely convenient for
usage in commercial objects.
• Protects the collected raw
materials form plunderers.
3–5 cbm
20 cbm
• A container is placed on
the vehicle platform.
• It is used for waste that may
be pressed (plastic, paper,
domestic waste, sawdust, etc.).
• Such containers collect waste
from reservoirs where waste is
poured out through the bottom.
20 m3
• A very big-sized container
used for light waste.
• Inside, the container may be
divided into several sections, in
order to collect different sorts
of waste at the same time,
e.g. paper, plastic and glass.
• A tent may be used, so that
waste would not blow off
during transportation.
25–38 m3
Collection of secondary raw materials
Secondary raw materials are collected by specific vehicles, equipped with presses and container lifting equipments.
PREPARATION OF SECONDARY RAW MATERIALS FOR RECYCLING
The secondary raw materials collected by the joint-stock company “Ecoservice” are once more sorted out in sorting bases: paper is
sorted into 7 sorts, glass – into 2, and plastic waste – even into 18 sorts! Wood and metal waste is also separated from the whole waste
flow.
The raw materials following the sorting process are pressed and given over to recycling companies, and here they again are reborn for a
new life.
UAB “Ecoservice“ • Jočionių str. 13, LT-02300 Vilnius • Tel. (8 5) 264 9251
Quality tel. 8 687 44 444 • E. mail. [email protected] • www.ecoservice.lt