Lewis Deck - EOS Facades

DRAWING INDICATIVE ONLY:
A4
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
Flexible fill between closer angle
and existing wall. (25mm)
Seal end of deck on site
FFL
Ceiling by
others
EOS Lattice.
EOS Lattice.
Lewis Deck with Gyvlon Screed or Concrete Infill
Last lattice of cassette
100 x 2mm angle (depth to suit project)
fixed on site to suit existing wall.
Fix to u/s of deck with screws
at 150mm staggered centres.
SECTION
Title:
LEWIS DECK DETAIL - ABUTTING EXISTING WALL (LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
180
A
Approved By:
Date:
Face of existing
structure
DRAWING INDICATIVE ONLY:
A4
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
80 x 1.2mm galvanised strap screwed
to each lattice to seal joint.
FFL
EOS Lattice.
D98 wrapping mesh (300mm wide)
screwed down over joint prior to
casting.
EOS Lattice.
Lewis Deck with Gyvlon Screed or Concrete Infill
End of decking sealed
in factory.
Ceiling by
others
Plasterboard finishes & insulation
omitted for clarity.
SECTION
NOTES
1. Sheets screwed to lattices every other trough.
2. Lattices secured underside with Simpson party wall strap as per standard details.
3. Joint to be primed with cement grout wash prior to casting.
Title:
LEWIS DECK DETAIL - CASSETTE JUNCTION (LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
181
A
Approved By:
Date:
DRAWING INDICATIVE ONLY:
A4
EOS Steel Frame.
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
Lewis Deck with Gyvlon Screed
or concrete infill
EOS Steel Frame.
DETAIL A
Z plate support - 2mm thick S275 grade galvanised
plate. Depth to suit lattices and deck. Bearing
width to suit wall frame thickness.
Ceiling by
others
10mm packing board between Z plate
and EOS frame.
Finishes to project
requirements
Insulation omitted for clarity.
SECTION
Decking clearance
sealed on site
DETAIL A
Title:
LEWIS DECK DETAIL - FLOOR CASSETTE ONTO SUPPORTING INTERNAL WALL
(LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
182
A
Approved By:
Date:
DRAWING INDICATIVE ONLY:
A4
EOS Steel Frame.
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
FFL
Compressive sealing block
fixed on site (by others)
EOS Lattice.
Lewis Deck with Gyvlon Screed or Concrete Infill
10mm CP board
or similar.
EOS Steel Frame.
Seal end of deck in factory
Ceiling by
others
Plasterboard finishes & insulation
omitted for clarity.
SECTION
Title:
LEWIS DECK DETAIL - FLOOR CASSETTE ADJACENT TO EOS WALL (LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
183
A
Approved By:
Date:
DRAWING INDICATIVE ONLY:
A4
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
75mm wide, 2mm thick galvanised angle
(depth to suit site finishes) fixed to
end of decking.
Stabilise angle with diagonal straps at
450mm c/c. Single screw each end.
FFL
Site finishes to suit
External balcony PFC (as drawn)
or other external balcony
structure
EOS Lattice.
Lewis Deck with Gyvlon Screed or Concrete Infill
Seal end of deck on site
EOS Steel Frame.
10mm CP board
or similar.
Ceiling by
others
External wall construction
(site specific)
Plasterboard finishes & insulation
omitted for clarity.
SECTION
Title:
LEWIS DECK DETAIL - FLOOR CASSETTE TERRACE & BALCONY JUNCTIONS
(LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
184
A
Approved By:
Date:
DRAWING INDICATIVE ONLY:
A4
TOLERANCES:
Construction tolerances between frames
is -0mm +2mm. Frames are manufactured
and assembled to +0mm -2mm.
Lewis Deck with Gyvlon Screed
or concrete infill
2mm thick angle plate, Depth to
suit floor depth.
Z plate support - 2mm thick S275 grade galvanised
plate. Depth to suit lattices and deck. Bearing
width onto UB - 100mm.
Blocking piece required to prevent
rotation of Z plate on all beams which
are greater in depth than theEOS lattice
SECTION
Title:
LEWIS DECK DETAIL - FLOOR CASSETTE TO HOT ROLLED BEAM CONNECTION
(LBSO)
STAGE:
Preliminary:
Approval:
Construction:
Drawn By:
Scale:
n.t.s.
Drawing No.
Revision:
185
A
Approved By:
Date: