QUICK SETUP GUIDE

ES-G125232
QUICK SETUP GUIDE
4
20044 - 1127006 - 1111 - 1111
MAKING CONNECTIONS
AV OUT
TV Side View
HL32K160L HL39K160PL HL42K160PL
HL50K160PL HL55K160PZL
Connect a composite video cable and left-right audio cables from external equipment
for monitoring or recording video.
Video
TV Back View
L
R
1
3
ACCESSORIES LIST
User Manual
Quick Setup Guide
Battery (AAA) × 2
Comp/AV Adapter
For 32” 39” 42” 50”
Screw (M4×12) ×6
Screw (M5×12)×4
For 55”
Screw (M5×12) ×10
Screw (ST4×14)×2
VIEWING THE REMOTE CONTROL
Comp/AV Adapter
in Accessories
Infra-red transmitter
Remote Control
VGA & VGA AUDIO
Indicator glows from white to red when
buttons are pressed
Screw (ST4×14)×2
Power Standby button: Power on /
Standby
Select input sources
Analogue or Digital TV selection
AC Power Cord
If the item is not specif ied in the accessories list, it should be provided by customer.
Monitor / VCR
Power Switch
Connect a VGA cable and an audio cable from the PC.
• To select the VGA: Press [Source] button, when the list of Input
Source appears, press [▲/▼] to select the source [VGA], then
press [OK] to connect.
TV Bottom Panel
Select a channel or input numbers
PC
2
INSTALLING THE STAND
Return to the previous channel
Display TV program and input source
information
Select preset picture mode
Fast access to your saved favorite
channels
NOTE
Select sound mode
Mute and restore sound
Product image is only for reference, actual product may vary in appearance.
1
Adjust the volume
2
Base
Screws:
M4×12 (32”~50”)
M5×12 (55”)
Select a channel
Secure the stand column to the base
with the 4 screws provided.
Secure the stand cover to the stand
column vertically with the 2 screws
provided.
3
4
Display the main menu
/ Back menu display
Confirm the selection in the OSD menu
/ Display a list of channels saved in TV
tuner memory
Adjust aspect ratio
Stop image motion
Mono or Stereo operation
Time Shift of live DTV programs
Display the Electronic Programming Guide
in DTV mode
Select audio language in DTV mode
Switch to DTV Radio program
Turn Subtitles on or off
Enter the DMP Mode
Start video recorder in DTV mode
Media player controls: Play / Pause, Stop,
Rewind, Fast Forward, Previous and Next
Teletext controls
Text: enter or exit Teletext mode
Size: adjust Teletext size
Reveal: Show Teletext hidden information
Cancel: Disable Teletext information
Hold: freeze Teletext
Sub. Code: Select sub-pages
Mix: Display Teletext on top of TV program
Index: Display the EPG list by time
or by channel
Stand Column
Secure the stand cover to the stand
column horizontally with the 2 screws
(ST4×14) provided.
ANT
Connect an outdoor VHF/UHF antenna.
Exit the OSD menu
Sleep: Set the sleep timer
Stand Cover
Secure the stand to the TV with the 4
screws (M5×12) provided.
CAUTION
Carefully place your TV facedown on a soft, cushioned surface to prevent
damage to the TV or scratching to the screen.
Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment. No sound connection is
needed for HDMI to HDMI connection. If the device signal resolution does not match the specification
table you need to change the setting of device according to the table. Please consult your device user
manual for instruction.
• To select the HDMI / Component / AV: Press [Source] button, when the list of Input Source appears,
press [▲/▼] to select the source [HDMI] / [Component] / [AV], then press [OK] to connect.
BETTER
(COMP)
3
Comp/AV Adapter
in Accessories
4 inches
(10cm)
4 inches
(10cm)
2 ⅜ inches
(6cm)
Leave at least this much space
around the set.
Never install the TV set as follows:
Dispose of your batteries in a designated disposal area. Do not throw the batteries
into fire.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into the
battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
The effective range of remote control is suggested in the figure below.
CAUTION
Inadequate air circulation can lead to
overheating of the TV and may cause
damage to your TV or cause a fire.
HL39K160PL
HL42K160PL
889×590×225
968×634×225
Size without base (mm)
737.5×445.3×59.8
889×533×59.7
968×575×58.9
Weight with base (kg)
8.6
12
14
Weight without base (kg)
7.3
10.5
12.5
Pb
Screen Diagonal Size
39 inches
39 inches
42 inches
Pr
Sound Output (RMS)
6W+6W
7W+7W
8W+8W
L
Screen Resolution
1366 × 768
1920 × 1080
1920 × 1080
60 W
70 W
80 W
About the Comp/AV Adapter:
Power Consumption
Video
GOOD
(AV)
AV
Video Camera/
Set-top Box/
Satellite Receiver
L
R
AUDIO
L
R
Component
Y
COMP
Pb
Pr
AV OUT
Video
L
R
AV
SPECIFICATIONS
737.5×505.1×200
Y
Component
5
HL32K160L
Video
L
REMOTE CONTROL RANGE
Model
HL50K160PL
HL55K160PZL
Size with base (mm)
1124×729×281
1249×803×330
Size without base (mm)
1124×663×64
1249×734×58
Weight with base (kg)
21
28
Weight without base (kg)
18
24
Screen Diagonal Size
50 inches
55 inches
Sound Output (RMS)
10 W + 10 W
10 W + 10 W
Screen Resolution
1920 × 1080
1920 × 1080
Power Consumption
95 W
120W
Power Supply
AC 50/60 Hz
Colour System
PAL
Television System
PAL B DVB-T
Temperature: 5°C - 35°C Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
Environmental
Conditions
MHL
Connect an MHL cable (not provided) from your MHL-enabled device, such as a cell phone.
• You can use [▲/▼/◄/►] and [OK] buttons to navigate on your devices.
6m
8m
Wall
Connect Headphone for audio out of the TV.
Size with base (mm)
R
1. The maximum distance is 8
meters in front of the TV set.
2. The remote control is effective
within 30 Degrees of horizontal
angle, or 15 Degrees of vertical
angle at maximum distances of
6 meters.
Air circulation is blocked.
HEADPHONE
Model
R
NOTES
Speaker
HDMI / COMP / AV
1. Slide open the battery cover on the back of the remote control.
2. Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the
signs on the battery compartment.
3. Close the battery cover.
Gently Push
Connect an optical cable from an external digital audio system (Toslink optical cable
is needed).
Headphone
BEST (HDMI)
2
OPTICAL
ANT OUT
The Installation Guide Menu appears the first time you turn on the TV. It will assist you to specify
the Mode Setting, OSD Language, Country, Scan Type and Auto Tuning.
Mode Setting - Press [◄/►] buttons to select your Mode Setting: Home Mode or Shop Mode.
Home Mode is the recommended setting which offers full functionality of the television.
OSD Language - Press [◄/►] buttons to select your OSD Language.
Country - Press [◄/►] buttons to select your Country.
Scan Type - Press [◄/►] buttons to select the desired signals to be found ATV, DTV+ATV or DTV.
Auto Tuning - Press [►/OK] buttons to automatically start tuning channels available in your
viewing area. Pressing [Menu] to select “Skip”, discontinues the current channel search. Press
[EXIT] to terminate the auto-tuning process.
CHANGE THE BATTERIES
1
VHF/UHF Antenna
Antenna Cable (75Ω)
Make sure that your TV has adequate air circulation. Allow enough space around
the TV as shown below. Avoid operating the TV at temperatures below Inadequate
air 41°F (5°C).
12 inches
(30cm)
Portable Storage
Device
OR
SECURING THE INSTALLATION SPACE
Install with stand
Connect a USB 2.0 device port for browsing photos, listening music and watching recorded movies.
• To select the USB device: Press [Source] button, when the list of Input Source appears, press
[▲/▼] to select the source [DMP], then press [OK] to connect. Or press [D/EMP] to directly enter
the DMP menu.
Outdoor
Antenna
▲/▼/◄/►: Up/Down/Left/Right
Stand Column
USB
Check the jacks' for position and type before making any connections.
Loose connections can result in image or color problems. Make sure
that all connections are tight and secure.
Stand Cover
Stand Column
Screws:
M4×12 (32”~50”)
M5×12 (55”)
32” does not have this HDMI jack
15°
Component mode
480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz,
720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz
VGA mode
640×480, 800×600, 1024×768, 1280×1024 (Not available for 32”)
60Hz
HDMI mode
480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz,
720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz
640×480, 800×600, 1024×768, 1280×1024 (Not available for 32”)
60Hz
15°
6m
220 - 240V
NOTE
Features, appearance and specifications are subject to change without notice.
6m
30°
30°
8m
6m
MHL-enabled Device
If you encountered difficulty when setting up your TV, we suggest
you refer to the Trouble Shooting tips in the User Manual.
Dial: 1800 447 367 (Toll Free) http://www.hisense.com.au