S26041 - Liteline Corporation

Comments

Transcription

S26041 - Liteline Corporation
Job Information
Type
Project Name
S26041
Location
Sigma 2 Round Slope Ceiling Wall Wash LED
Fixture
Recessed Lighting
Date
Quantity
Contact/Phone
Notes
Features
Reflector
heat dissipation and reduce LED
junction temperature.
Multi-faceted reflector available in spot
(15°), medium (40°) or wide (50°) beam
angle.
FIXTURE SPECIFICATIONS
LED Driver
The LED driver is remote mounted from
the LED module, to allow for a lower
operating temperature of the LED,
longer life and serviceable separate
from the LED module. Featuring a power
factor greater than 0.9, and THD of less
than 20%, the LED module is available
in 500mA (for non-IC applications) or
300mA (for IC applications) Class 2
LED driver. The remote mount junction
box is provided with a external thermal
protection (on 300mA model only) to
sense over temperature, or incorrect
installation.
LED Characteristics
Available with high powered
BRIDGELUX® LED chip that maintains
uniform intensity with a luminous flux
of 1000 when used with 500mA LED
driver, or 500 when used with 300mA
LED driver; with a typical 90 CRI and
a 50,000 hour life span. Available in
3000°K or 4000°K correlated colour
temperature.
Dimming
This fixture is dimmable when used with
a TRIAC dimmer (consult factory for
compatible dimmers).
Listing
• cETLus listed for damp locations.
Heat Sink
Aperture
Application
Approved Location
CCT
Certification
CRI
Cuthole
Dimming
Dimming Tech
Lamp Type
LM79
LM80
Lumens
Power Factor
Power Supply Type
Primary Voltage
Projected Lumen
Maintenance
Warranty
THD
1½"
Recessed
Damp
3000°K / 4000°K
cETLus
90
2-15/16"
Yes
TRIAC
LED Engine
Yes
Yes
1000 / 500
>0.9
Constant Current
120V
70% @ 50,000 Hrs
5 Years
<20%
Cylindrical heat sink constructed of
extruded aluminum designed to facilitate
Description
15"
381mm
Ø 2-15/16"
75mm
2-1/2"
64mm
The small aperture Sigma 2 LED fixture
provides for a small profile installation,
allowing for installation in small spaces
in various applications. The retrofit
design of this fixture makes for easy
installation. A low operational cost
and maintenance-free alternative to
incandescent or CFL downlights.
5-9/16"
141mm
5"
127mm
2"
51mm
20°
3-7/16"
87mm
4"
102mm
Thermal
Protector
Notes: For additional options please consult
your A-Line representative.
Due to our continued efforts to improve our
products, product specifications are subject to
change without notice.
Ordering Guide
Driver
S26041 -
Colour Temp.
Beam Angle
CRI
500 : 500mA (19W, 1000 lm, Non-IC)
300 : 300mA* (11W, 500 lm, IC)
Trim Colour
-
30 : 3000°K
40 : 4000°K
S : Spot (15°)
M : Medium (40°)
W : Wide (50°)
90 : 90 CRI
WH : White
*300mA option is approved for direct contact with insulation. Not suitable for use with spray foam insulation.
Liteline Corporation
[email protected] liteline.com
8 Abacus Road, Brampton
www.liteline.com
Ontario, Canada L6T 5B7
© Copyright 2015, Liteline Corporation
416-996-1856
1-866-730-7704
905-794-1990
1-888-738-9736
REV6/5.21.15

Similar documents