blm issues new hydraulic fracturing regulations
Transcription
blm issues new hydraulic fracturing regulations
Client Alert March 30, 2015 BLM ISSUES NEW HYDRAULIC FRACTURING REGULATIONS On March 26, 2015, the Bureau of Land Management (BLM) published its final rule concerning hydraulic fracturing on Federal and Indian lands. The rule requires an operator planning to conduct hydraulic fracturing on Federal or Indian lands to: • Submit to the BLM detailed information about the proposed operation, including wellbore geology, the location of faults and fractures, the depths of all usable water, the estimated volume of water to be used, and the estimated direction and length of fractures; • Design and implement a casing and cementing program that follows best practices and meets performance standards to protect and isolate usable water (defined as water containing less than 10,000 ppm total dissolved solids); • Monitor cementing operations during well construction; • Take remedial action if there are indications of inadequate cementing and demonstrate to BLM that the remedial action was successful; • Perform a successful mechanical integrity test prior to the hydraulic fracturing operation; • Monitor annulus pressure during hydraulic fracturing operation; • Manage recovered fluids in rigid enclosed, covered, or netted and screened aboveground storage tanks (with limited exceptions, open pits are prohibited); • Disclose the chemicals used via the fracfocus.org website; and • Provide the BLM with documentation of all of the above actions. These requirements are in addition to applicable state oil and gas regulations. The effective date of these new regulations is June 24, 2015. The regulations have, however, already been challenged in a lawsuit filed by two industry groups in the United States District Court for the District of Wyoming. Independent Petroleum Association of America v. Jewell, No 15-CV-41-F (D. Wyo. filed Mar. 20, 2015). The effective date of the regulations may be delayed as the litigation proceeds. But at this point, operators of wells on Federal and Indian lands should be aware of the new requirements and assess the need for any changes to current BLM Issues New Hydraulic Fracturing Regulations Client Alert March 30, 2015 operations to achieve compliance. A complete copy of the new regulations is available at http://www.gpo.gov/fdsys/pkg/FR-2015-03-26/pdf/2015-06658.pdf. If you have any questions about the information contained in this Client Alert, please contact the Thompson & Knight attorney with whom you regularly work or the attorneys listed below for more information. CONTACTS: James C. Morriss III 512.469.6130 [email protected] Christopher D. Smith 512.469.6108 [email protected] Ashley T. K. Phillips 512.469.6135 [email protected] Paul C. Sarahan 512.469.6106 [email protected] This Client Alert is sent for the information of our clients and friends. It is not intended as legal advice or an opinion on specific circumstances. ©2015 Thompson & Knight LLP 2 BLM Issues New Hydraulic Fracturing Regulations
Similar documents
North and Central America Proppant Market
Hydraulic fracturing, also known as fracking, is a process that has been used by gas companies since the 1940s. The process involves injecting sand, chemicals, and water into a well under carefully controlled conditions to crack or fracture solid rocks and release trapped gas deposits. The development of hydraulic fracturing technology has led to the usage of proppants. Proppants are used during hydraulic fracturing in order to keep the fissures open for the oil and gas to flow towards the well head. These are primarily of three types such as sand, resin-coated and ceramic.
More information