RoTx® - 1900PT/2600PT FABRIC PRE

RoTx® - 1900PT/2600PT
FABRIC PRE-TREATMENT
RoTx
SPRAY UNIT
PRE-TREATMENT
Precise even pre-treatment of fabrics for pigment inks are essential for providing added colour gamuts and wash
HEATER
was designed to do more than just wet fabric. An atomizing nozzle
fastness. The RoTx® pre-treatment module
lays the correct amount of pre-treatment solution to the top surface of fabric without the underside getting wet.
This results in the fabric hand and weight not changing in production.
A quad zone horizontal fixation unit dries the fabric inline so its ready to print straight from the RoTx® pre-treat
machine.
Pre-treat
printer series or off line for greater productivity.
Designed to run inline with the RoTx®2190/2260
HEATER
Printer
SPRAY UNIT
OFF LINE
SPRAY UNIT
IN LINE
HEATER
Pre-treat
Pre-treat
Specifcations
SPRAY UNIT
2600mm
SPRAY UNIT
1900mm
Width x Depth x Height (mm)
2700 x 1800 x 1300 (106" x 71" x 51")
3400 x 1800 x 1300 (134" x 71" x 51")
Media size (mm)
1900
2600
HEATER
HEATER
Nozzles/Atomizer
2
2
Speed
>80m2/hour
>80m2/hour
Fixation Unit
Printer
Pre-treat
Printer
Impression Technology Pty Ltd
Pre-treat
Unit 2. No1 Skyline
Place, Frenchs Forest, Australia
Factory: 39 Joo Koon Circle, Jurong, Singapore
Email: [email protected]
HEATER
SPRAY UNIT
Print trials must be undertaken prior to production – no warranties, express or implied, are given in connection with the accuracy or completeness of any of the information contained
herein. RoTx, Roto-trac, DTG Digital, Forward Thinking and PigmentInc are registered trade marks and or copyright of Impression Technology Pty Ltd, Australia. All copyright reserved.
www.pigmentinc.com