Your Production Matters To Us - Used Cnc Machines Canada | Cnc

Comments

Transcription

Your Production Matters To Us - Used Cnc Machines Canada | Cnc
JULY 2014
Volume 29 Number 7
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
email: [email protected]
M A C H I N E R Y
Your Production
Matters To Us
We offer innovative solutions to increase your productivity
PUNCH PRESS
PLASMA
MACHINE
PRESS BRAKES
FIBER LASER
SHEARS
FLEXIBLE COIL
PUNCHING
LINES
PLATE ROLLS
PROFILE ROLLS
ONTARIO - EASTERN CANADA
3980 Chadburn Crescent
Mississauga, ON L5L 3X4
Tel: 905-820-3232
Fax: 905-820-3234
WESTERN CANADA
Westside Service Ltd
4406-58 St. South
Lethbridge, AB T1K7E2
Tel: 403-380-5047
Fax: 403-380-5048
Quality | Service | Value | www.ferricmachinery.com
Distributor of
New 2014 pricing!
SN 50 C
starting at $35,990
Technical Data
Distance between centers
mm
1000,1500, 2000
Max. swing over bed
mm
500
Max. swing over cross slide
mm
270
Max. spindle speed
min -1
2000
Main motor output
kW
5,5
SE 520
starting at $156,100
Technical Data
Distance between centers
mm
950/1450
Max. swing over bed
mm
520
Max. swing over cross slide
mm
290
Main motor output S6
kW
15
HEIDENHAIN MANUAL Plus
620
yes
Full sales and service support
on new and used machines
Havlik International
300 Holiday Inn Dr., Cambridge,
ON N3C 1Z4, Canada
Tel: (519) 624-2100
Fax: (519) 624-6994
[email protected]
Page 2
www.havlikinternational.com
Clue July, 2014
Clue July, 2014
Page 3
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512
e-mail: [email protected] ! web: www.tradermachinery.com
BORING MILLS, CNC, HORZ, FLOOR
5"
GIDDINGS & LEWIS, X-36’ Y-14.7’, Mitsi S60 control
BORING MILLS, HORZ, TABLE
3"
3-1/2"
4.3"
MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table
PBR, 37"x 47" tbl, 48" vert, 60" F-B, DRO, Mint!
MITSUBISHI, M-HT1416B (1999), CNC, Meldas 520M, 80 ATC, CAT 50
BORING MILLS, VERT
63"sw
TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS
30 to 3000 Ton
44 Ton x 6’
44 Ton x 8’
50 Ton x 4’
55 Ton x 6’
75 Ton x 10’
130 Ton x 10’
130 Ton x 12’
130 Ton x 14’
143 Ton x 10’
160 Ton x 18’
200 Ton x 12’
235 Ton x 12’
250 Ton x 12’
300 Ton x 16’
300 Ton x 20’
400 Ton x 20’
NEW
"NEW" ACCURPRESS Models CNC
FABMASTER, Hyd, 4 way die
FABMASTER, PPT 44-8, Hyd.
“NEW” ACCURPRESS, Absolute SF350-4, CNC, 18” Opening, 8” stk, 13” throat
PACIFIC, Hurco CNC, Single-axis
"NEW" ACCURPRESS, CNC
"NEW" ACCURPRESS, CNC
ACCURPRESS, 2-Axis
ACCURPRESS, ETS3000 (2005)
(2) HAMMERLE (2001), 6-Axis, 13” Stk.
ALLSTEEL, Hydraulic
"NEW" ACCURPRESS, CNC
ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded
"NEW" ACCURPRESS, CNC
PACIFIC, Hyd. FOPBG, Light Curts, 4-way die, Cylinders re-done
ALLSTEEL, Hydraulic
UNIVERSAL, Hyd, Flush floor design
DRILLS, COLUMN & BENCH
1-3/8"cap
"New" DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL
3’ arm
9’arm
"New" TONE FAN, RD-900
SHENYANG, Box table
EDM, CONVENTIONAL NC/CNC
50 Amp
ARISTECH, CNC, Sinker, 25.6"x 13.8" table
GRINDERS, CYLINDRICAL
5"x 13"
JONES & SHIPMAN, 1212E
GRINDERS, SURFACE, RECIPROC
6" x 18"
6"x 18"
8"x 18"
16"x 24"
20"x 13’
"New" KENT, KGS-200
CHEVALIER, Manual
CHEVALIER, FSG-3A818, Fully auto
DARBERT (1998), Auto. Downfeed
SNOW, Hydraulic
IRONWORKERS
50 Ton
55 Ton
86 Ton
SPARTAN, IW50, Hyd., 3” x 3” x ¼”, 220V/1/60
"NEW" MAKO, Universal, 5"x 5"x 3/8" angle
METAL MUNCHER, Hyd., Fabricator
LASERS
1500 Watt
2600 Watt
3000 Watt
3200 Watt
4000 Watt
5000 Watt
MAZAK (1999), New Turbo X-510
TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet
TRUMPF, L2530 (1998), 4’x 8’
TRUMPF, Lasercell, 5-Axis
BYSTRONIC, Bystar 3015 (2002), 5’x 10’
TRUMPF, L3050 (2003), Linear laser, 5’x 10’
LATHES, ENGINE
12" x 40"
13"x 40"
15"x 40"
17"x 60"
18" x 60"
25"x 110"
63"X 106"
"New" MORTON, F1900-AEG (2001), Single Phase
COLCHESTER, Toolroom, 8” 3-jaw chk.
FAMOT, Toolroom, DRO
YAM, 10" 3-jaw chk, 2" bore
"New" POWERTURN, 460
STANKO (1995), 16" 3-jaw chk, steady rest
BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNC
MAZAK, Quickturn Nexus 200 (2003), 8"chk, Chip. Conv
DAEWOO, Lynx 200 (1998), Fanuc 21T
KITAKO (2004), 4 spdl, Vert turning center, 10"Sw, Fanuc
DMG MORI, Sprint 65 Siemens (2011), 2 Spdl., 3 Turret, 1,581 Spdl. Hrs.
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap
MAZAK (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach. Length
DMG, CTX310 (2005), 13"sw, Live tools, Fanuc 32i
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore
COLCHESTER, Storm A90 (2000), 8"chk, Fanuc 21iT, Barfeed
COLCHESTER, Tornado A90 (2004), 8"chk, Fanuc 21iTB, Barfeed
Page
PAGE44
20"Sw, 23.6"ctrsGILDEMEISTER, CTX410 (2007), Fanuc 32i, 3D, Live Tool
26.8"Sw, 41.2"ctrs GILDEMEISTER, CTX510 (2004), Fanuc 21iT, 10"chk
27"Sw, 50"ctrs
GILDEMEISTER, CTX600 Linear (2002), Heidenhain iTNC, 15"chk
MACHINING CTRS, HORZ
TOYODA, FH100 (1989), Twin Pallet
MAZAK, HTC-400 (1998), X-22" Y-20" Z-20", Mazatrol M-Plus
MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control
MAZAK, H500/50 (1987), X-28" Y-25.6" Z-25.6"
MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6", Installed 2013
MITSUBISHI, H60E (1998), X-39.5" Y-31.5" Z-31.5"
MACHINING CTRS, VERT
DECKEL MAHO, DMU50T, 3 + 2, CNC
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm, ATC 18, CAT 20
MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", Yasnac
DMG, DMC835V (2009), X-32" Y-20" Z-20", 3 Siemens 840D, 10k rpm, CAT40
FADAL, VMC4020 (2005), X-40" Y-20" Z-20", Fanuc 18i-MB5
HARDINGE, VMC-1000 (1998), X-40" Y-20" Z-20", Fanuc OMD
BRIDGEPORT HARDINGE (2007), X-40" Y-24" Z-24", Fanuc 18iMB
OKK, MCV-560 (2000), X-41" Y-22" Z-22"
MILLS, CNC
16" x 35"
X-22" Y-20" Z-18"
FIRST, CV-410 (1999), BT40, Fanuc OM
DECKEL, FP4
MILLS, UNIVERSAL
12"x 55"
20"x 87"
CMC, FU-2, Vert/Horz, 6.5hp
DAH-LIH, 4-Axis Hedenhain DRO, 50 taper
MILLS, VERTICAL
9" x 49"
10"x 50"
10" x 54"
12"x 54"
New MAGNUM-CUT, VM-2V, 3hp
TOPWELL, 5VK
New MAGNUM-CUT, VM-4V, 40 Taper, 5hp
FORWARD, 40 taper, Newall DRO
PRESSES, OBI
80 Ton
80 Ton
ROUSSELLE, 8B-48, 48” x 22” Bed, OBI
BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PRESSES, STRAIGHT SIDE
250 Ton
800 Ton
New!
BROWN BOGGS, SS2-250-72-39 (2000), 39"x 72" bed, 6"stk
BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like
PUNCHES, TURRET
20 Ton
30 Ton
STRIPPIT, FC1000R (1994), Fanuc Control
TRUMPF, Trumatic 2010R (2002)
EUROMAC, CX1250/30 (2000), CNC
ROLLS, ANGLE BENDING
2"x 2"x 3/16"
2” x 2” x 1/4”
"NEW" TAURING, SAF DS 50HV, Hydraulic
ZOPF, &B70/2MD (2006), Assted. tooling
ROLLS, PLATE BENDING, INIT. PINCH
1/2"x 10’
ROUNDO (1997)
SAWS, BAND, HORIZONTAL
10"x 15"
16"x 18"
"NEW" ACRA, Speeder FHBS-250V
HYD-MECH, S23, Manual
SAWS, BAND, VERTICAL
20" Throat
T-JAW, No.500, w/ Blade welder, Shear & Grinder
SHEARS, POWER SQUARING
1/4"x 10’
1/4"x 13’
1/4"x 16’
3/8"x 8’
PROMECAM, Hyd.
AMADA, M4065, Mechanical
STEELWELD, Mech. Shear
ACCURSHEAR (1998), Hydraulic
TABLES, ROTARY
12-1/4"
KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore
MISCELLANEOUS
Barfeeder
Barfeeds
Box & Pan Brake
Keyseater
H-Frame Press
H-Frame press
Magazine Barfeeder
Notcher
Pipe Bender
Wet type Sander
Wire Machinery
SPACESAVER, 4’ SMW, Autoload 12.65
LNS, Servo S2 & S3, Late models, w/Remote pendant, Excellent
8’ x 12ga SAMPSON, Hydraulic
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2"
ENERPAC, 100 Ton, Hyd.
70 Ton DAKE, Air/Hyd
4’ SAMECA, MBF1000 (1998), Auto Loading
(NEW) BOSCHERT, 5/32" x 8-7/8" x 8-7/8", Hydraulic
5-1/2" ENERPAC, Hyd., plus Asst’d tooling
36" TIMESAVER, No.137-IHD
"NEW" METALEX, WT250, Wire Nibbler
Clue July,
2014
CLUE,
July 2014
63 Maplecrete Rd.
Concord, Ontario L4K 1A5
Tel: (905) 669-7507
Fax: (905) 669-7512
www.tradermachinery.com
NEW ACCURPRESS MODELS
CNC PRESS BRAKES
See Demos on the highly successful leader in precision forming Accurpress Press Brakes.
41.3”X, 22.04”Y, 22.04”Z, OKK, 2000,
CNC Vertical Machining Center, Fanuc 16iM
MORI SEIKI, 2012, NHX5000, 28.7”X, 28.7”Y, 34.6”Z,
CNC Horizontal machining Center, Mori Seiki M730 BM
20 Ton TRUMPF, Trumatic 2010R, 2002,
CNC Turret Punch
44 Ton x 8’, FABMASTER, 2005,
Hyd. Press Brake, Light Curtains
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
Clue July, 2014
Page 5
MABE
CANADA
Major Appliance Manufacturer – 1.5 Million Sq Ft – Over 2000 Lots!
5781 Rue Notre-Dame Street Est,
Montreal, Quebec, Canada
7 Additional
Presses Up To
1,000 Ton
Available
8 Overhead
Cranes Up To
25 Ton Available
SCHULER 1,320 TON STRAIGHT SIDE DOUBLE CRANK TRANSFER PRESS, MODEL TS2-1200-6-40
1 of 3
1 of 7 Molders
HPM 730 TON HYDRAULIC INJECTION MOLDER, MODEL MLH 730-WP 120 20/1
NORDSON ELECTROSTATIC POWDER COAT AUTO PAINT SYSTEM, MODEL EXCEL 2000
Auction: Thursday July 10, 9:00 AM (ET)
In Conjunction With
Inspection: Wednesday July 9, 9 AM to 4 PM
BKR BINDERY SERVICES Quality Bindery & Finishing Equipment
Auction: Wednesday July 16, 11am ET Inspection: Morning of Auction From 9am-4pm
5610 Finch Avenue East, Scarborough, Ontario, Canada
2 MULLER 8 & 6 Pocket Saddle Stitching Lines
2 STAHL B30 – 30’x50’ Folders With 8 & 16 Pg Attachments
2 STAHL TD94/4KTL-PD 36” Pallet Fed Combination Folders
STAHL TF66 – 26” X 40” Continuous Fed Folder
2 POLAR 115ED & 115EMC 45-1/4” Guillotines
Plus: MULLER Accessories, Including: (2) Calendar Punches, 3 Hole Punch,
(2) 5k Trim Kits, Hohner Loop & Mini Stitch Heads, (2) STAHL VSA86 Vertical
Stackers, (2) STAHL SBP46 Horizontal Stackers, STAHL 16 & 32 Page Right Angles,
STAHL VFZ52 Knife Folder, (3) STAHL Electronic Gatefolds, Moll Perf N’ Crease,
Challenge Paper Drills, (2) STRAPAK Strappers, DAMARK Shrink Wrap & More!
A U C T I O N S • L I Q U I D AT I O N S
FINANCING • APPRAISALS
905.669.8893
Bid Live Onsite
& Online Via
infinityassets.com
Page 6
Clue July, 2014
Page 8 / Steel Marketplace / JULY 2007
• APPRAISALS • FINANCING •
• TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS •
• TRAINING • SOFTWARE •
VISIT US AT:
www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
1/4” X 10 DURMA SB3006NT
HYDRAULIC SHEAR, MFG:2007
STOCK #9924
242 TON X 167” AMADA HFE2204/7,
PRESS BRAKE, OPERATEUR, MFG:2005
STOCK #10059
22 Ton, AMADA, VIPROS 255 TURRET PUNCH,
FANUC 18P,31 STA.,3 A/I, MFG:1998
MP1225NJ (2004) STOCK #10005
132 Ton, TRUMPF 3120, PRESS BRAKE
4-AXIS,T3000VA , MFG: 2011
STOCK #10036
33 Ton, AMADA, VIPROS III 3510 NT,
TURRET PUNCH 58 STA. 4 A/I,
MFG: 2004 STOCK #9962
4000 WATT, TRUMPF, TCL3030, LASER
SIEMANS CNC, 60” X 120”, MFG:1999
STOCK #10040
2000 WATT, AMADA, PULSAR LC2415XLA3,
LASER, 61” X 198” W/REPO ,MFG: 2000
STOCK #10058
88 Ton, AMADA, RG80, PRESS BRAKE
NC 9EXII 3-AXIS,MFG:2000
STOCK #10033
2500 WATT , MAZAK STX48MKII, LASER
MAZATROL L32B, MFG: 2004, 39,144 HOURS
STOCK #10024
2000 WATT, CINCINNATI CL-6, LASER,
5’ x 10’ DUAL PALLET,FANUC C2000,CHILLER
MFG:2000 STOCK #10019
190 TON, TRUMPF, V170, PRESS BRAKE,
DELEM, PROG. Z1,Z2, CROWNING,
CLAMPLING, MFG:2000 STOCK #10013
10’ x 1/2”, ROUNDO, No. PS255, HYDRAULIC
INITIAL PINCH PLATE ROLLS, MFG:1997
STOCK #9957
Check out our website for Photos, Specifications and a more complete inventory at
www. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956
Tel: 845-398-0073 [email protected]
Fax: 845-398-0074 www.jordancraigmachinery.com
Clue July, 2014
Page 7
Page 8
Clue July, 2014
New Design
RAM Equipped HBM
X-axis up to 6m
Y-axis up to 3.5m
Z-axis up to 3m
Table load up to 25t
Visit our website for more details:
www.tostrade.com
TOS Trade Canada Inc.
a TOS Varnsdorf company
Clue July, 2014
415 Industrial Dr.
Milton, ON L9T 5A6
http://www.tostrade.com
Tel: (905) 878 0888
Fax: (905) 878 9022
[email protected]
Page 9
Bringing the Best Machine Tools
to North America
GER
Vertical Grinders
up to 100” x 30” (height)
grinding capacity;
4 Ton part weight
Made in Spain
www.germh.com
Cylindrical Grinders
up to 20’, 6 Ton between centers;
up to 40” swing
Surface
Grinders with
Rotary Table
up to 60” x 20” (height)
grinding capacity; 2.5 Ton part weight
Surface Grinders
up to 20’ x 43” x 26” (height) grinding capacity;
4.5 Ton part weight
Rebuilding Unique Machine Tools
Toshiba HBM Rebuilt by DiPaolo
6Ó spindle
100Ó “Y”
30ʼ “X”
71Ó “W + Z”
Schiess VBM
Rebuilt by DiPaolo
160Ó table
30ʼ swing
110Ó part height
7040 Fir Tree Drive, Mississauga, ON L5S1K6, Canada
Toronto Office: 905-676-9265 USA Office: 412-421-1211
www.dipaolocnc.com
Page 10
[email protected]
Clue July, 2014
USED
MACHINERY
Horizontal Lathes
“NEW”
“NEW”
MAZAK
RD&D
SAFOP
OKUMA
HITACHI
MORI SEIKI
OKUMA+HOWA
NAKAMURA TOME
Horizontal Boring Mills
20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4”
spindle bore, splash guard, steady rest, 2 available, stock 4038
and 4039
20” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4”
spindle bore, splash guard, steady rest, 2 available, stock 4036
and 4037
Slant Turn 40N-ATC Millcenter 1000, Fanuc Control
64" x 170", sliding bed type gap lathe, 16" hole through
spindle, GN10 CNC control, Stock No. 3849
63" x 236", C axis, live tooling on programmable turret,
Siemens 840C CNC control, Stock No. 3791
15” x 36”, LU-15 CNC Lathe, 1995, Stock No. 3580
29” swing, Turret Lathe, 6.25” hole through, Stock No. 3183
27” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock,
12 station turret, Stock No. 4173
11” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB
Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157
SC300, 1998, Fanuc 21 control, 10” hydraulic chuck, 12
position turret, Stock No. 4224
Cylindrical Grinders
SCHAUDT
B&S
13” x 27”, Universal Heavy Duty, Stock No. 3826
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock
No.3825
Milling Machines
HECKERT
DARBERT
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal,
Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
Vertical Lathes
BERTHIEZ
OLYMPIA
SCHIESS
BULLARD
OKUMA + HOWA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw
main spindle, Live tooling, tool and part probes, very heavy
duty, Stock No. 4079
60” table, 70” swing, Model V60, New in 2001, rebuilt in 2013,
Fanuc 18iTA control, 60” 4 jaw hydraulic chuck, 12 position
ATC, chip conveyor, stock 4278
40” table, 55” swing, Model 14DKE100, updated electrics,
fresh paint, Stock No. 4071
Man-Au-Trol, 42” table, equipped with side head, from an
aerospace facility, gently used, Stock No.4205
ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position
turrets, 30HP spindles, Stock No. 4219
TOS
OLYMPIA
UNION
W100, 1996, partially reconditioned, DRO, Stock No. 4268
160mm Spindle, Model HT 140X80, CNC 6-Axis T-Type, Installed
new 2003, Fanuc 15i-MA CNC control
80mm Spindle, Model BFT 80/2, cleaned, cycled and
painted. Stock No. 3408
SCHARMANN
125mm spindle, Model Ecocut, Siemens 880 Control, 3000 RPM,
50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”
VANGUARD
130mm spindle diameter, Model TPX 6113/2, 50 taper, 71” x 63”
rotary table, built in facing head, Stock No. 4235
Surface & Blanchard Grinders
ARTER
SHIBAURA
Rotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
Machining Centres
TOS
12” x 51”, Model FV 25, FAGOR CNC control, box ways,
priced to sell, Stock No. 3710
LEADWELL
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20
position ATC, Stock No. 3453
BRIDGEPORT
20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40
taper, 1998, Stock 4159
HWACHEON
VESTA 1050B, 2013, Fanuc 0iMD, 40” x 20” table, 50 taper,
6000 RPM geared head, chip conveyor, coolant through
spindle prepped, Manual guide I.
Miscellaneous
IEMCA
DANDREA
ERLO
DO-ALL
AMADA
ARCHDALE
PRATT & WHITNEY
AMERICAN
PFAUTER
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock
No. 4066
CNC facing head
Fixed Table Single Spindle drill
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Granite Table, 150" x 150", Massive!, Stock No. 3418
Radial Drill, Stock No. 4211
Jig Grinder, Model No 20, Pratt and Whitney rotary table,
from an aerospace facility, gently used, Stock No.4215
Radial drill, 5’ arm, 17” column, 5MT spindle taper, power
quill travel, Stock No. 4237
Gear hobber, Model P900 Turbo, 36” max workpiece
diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x
9” long, Auto hob shift, swing away tailstock, change gears,
Stock No. 4253
Subscribe to our mailing list
OTHER SERVICES
» On-Site spindle taper grinding
» Machine tool calibration and metrology
» Mechanical, Electrical and CNC field service
» Installations and plant moves
» Spare parts including exchange programs
» Authorized distributor for Heidenhain, Fagor, Fanuc FA,
Siemens and Renishaw.
» Certified Appraiser on staff
» Way Grinding
Clue July, 2014
7040 Fir Tree Drive, Mississauga, ON L5S1K6, Canada
Toronto Office: 905-676-9265 USA Office: 412-421-1211
www.dipaolocnc.com
[email protected]
Page 11
THIS IS
CUTTING
EDGE
G7
FABRICATOR
WITH INTELLIGENT
BREAKAWAY
TORCH MOUNT
RECEIVE
$2500
IN CONSUMABLES STARTUP PACKAGE
We are FastCut CNC
FastCut CNC Inc.
2841 Bowers Place
Kamloops, British Columbia
V1S 1W5 Canada
THROUGHOUT MAY, JUNE, JULY
WHEN YOU BUY
ULTRA CUT AND G7 TOGETHER
Sales: 1-888-540-2224
Toll Free: 1-866-339-3377
Email: [email protected]
W W W. FA STC UTC N C .COM
Page 12
Clue July, 2014
“From Stock”
NEW MACHINES
Special Pricing - Large Inventory
All New Milling Machines - Lathes & Surface Grinders
HEAVY DUTY LATHES
26” x 120” x 4” Bore - 16” Wide Bed
20” x 80” x 4” Bore
Also in Stock: 14“, 16”, 18”, 20“ & 22” Swing
Special Package Includes
•
•
•
•
Fagor 2-Axis DRO
Machine Vise
Clamping Kit
R-8 Collet Set
DRILLMASTER RADIAL DRILL
S1600 - 5’3” Arm
TF1100 - 44” Arm
TF900 - 36” Arm
TF 750 - 30” Arm
MAXIMART BEDMILL
MXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter Head
Manual or with Fagor 3-Axis CNC
BARON-MAX MACHINING CENTRE
BARON-MAX CNC TEACH-IN LATHE
40” x 26” Fagor Control
30” x 60” - 4” Bore, also 18” x 40”
with Fagor CNC Control
POWERMASTER MACHINERY LTD.
1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327
e-mail: [email protected]
Clue July, 2014
Fax: 905-624-8591
website: www.powermaster.ca
Page 13
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3
Tel: (905) 738-8730
Fax: (905) 738-5148
e-mail: [email protected]
website:www.sabito.com
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
WE BUY & SELL SINGLE MACHINES OR COMPLETE PLANTS
BORING MILLS, HORZ, TABLE
3.14"
UNION, BFT 80/2
5"
G & L 450 Series MC50, Fanuc CNC
BORING MILLS, VERT
MAZAK Integrex E-1060V/8II (2010)
PUNCHES, TURRET
MACHINING CTRS, VERT
MONARCH VMC-45 CNC (1989)
AMADA, Apelio 357 (1992), 45stn, 4-Auto, Fanuc 04PC
MATSUURA MC-800 VF CNC (1995)
33 Ton
AMADA, Vipros 357, CNC, 58 stn, 2 Auto, Fanuc
BULLARD, VTL
DMG DMU 60T CNC (2002)
88"dia
STANKO, 1525, 100"sw, 70"v, 1.6-80rpm, 2 hd
EUMACH, DVM-5030, Double Column CNC Center, X-20.4" Y-12.2"
10’ dia
NILES, F120, 128"sw, 24"stk, 6’rail hd trav, 50hp
ROLLS, ANGLE BENDING
ROLLS, PLATE BENDING
60T x 6'
WYSONG THS60-72, Hyd, Automec 300, CNC, Light Guards DOOSAN, REVO 4020 (2006), CNC
70T x 10’
NIAGARA, HD-70-8-10, 102"bh, 15"SH, 7"stk, 24"BG
75T x 10’
DIACRO, 75-10, Hydro-Mech, 3"stk, 8"adj, 12"SH, 8"thrt
PACIFIC, J90-1, Hyd, 7"stk, 6"thrt, 6"SH, 2-Axis CNC, 15hp
CINCI, Series 5, 102"BH, 3"stk, 5"adj, 12"SH, 8"thrt, 30spm
230T x 13' ADIRA Model QHD-20040 Hydraulic (1997)
KAO-FONG, KF-G-450
230T x 13' ACCUPRESS Model 50235 Accell CNC (2006)
HURON, NU3
Radial arm drill
9"x 42"
KONDIA, Vertical
6’
STANKO, 2M55, w/ Box Table
9"x 42"
DARBERT, Vertical
9"x 49"
TOS, FNK 25
9"x 49"
RACER TECH, c/w Fagor DRO
9"x 49"
FIRST, LC 18 VSS, Newall DRO
KARSTENS K29, Universal Cnc
SHIBAURA, KRT-8D
GRINDERS, SURFACE, RECIPROC
6" x 18"
BROWN & SHARP, Hydraulic
8"x 24"
JAKOBSEN, Hydraulic
20"x 39"
20"x 120"
RAM, Roll-in
36" x 13
DOALL, 50-5200 ipm, Welder, Grinder
Can-Saw 115, Roll-in
SHEARS, POWER SQUARING
1/8"x 36"
Mechanical
1/4" x 10'
Haco Model TS 3006 Hydraulic (1990)
1/4" x 10’
VIMERCATI, SI 3006 (2004), Hydraulic
1/4" x 10’
CINCINNATI, Hyd, 36" FOPBG, v/Rake, Sq Arm, 15hp
1/4" x 10’
CINCINNATI, 2CC10, Mech, 36"FOPBG, 60spm
1/4" x 12’
NIAGARA, Hyd, 36" FOPBG, 50"sq arm, 20spm, 15hp
20" x 94"
3/8" x 10’
CINCINNATI, 24"ROMBG, 50spm, Sq Arm, 20hp
25hp
3/8" x 10’
CINCINNATI, 1510, 42" FOPBG
TOS, FC63V, X-63" Y-23.62" Z-23.62", 3-Axis Heid DRO
3/8" x 12’
CINCINNATI, 4312, Mech, 40" FOPBG, 18"throat, 50spm, 15hp
HAAS, MDC500, CNC, (2006), Double Pallet
1/2" x 10'
ADIRA Model GHS-1330 Hydraulic (2005)
1/2" X 10'
HACO HSLX 3013 Hyd, .39"FOPBG
24" x 98"
CINCINNATI, #5, X-50" Y-18" Z-16", #50, 14-1400rpm,
PRESSES, GAP FRAME
TOS, BHU 50A/1000
LATHES, ENGINE
SAWS, BAND, VERTICAL
10" x 15"
17 11/16" x 74 13/16" Fortworth VBM 4V (1995)
GRINDERS, UNIVERSAL
20"x 39"
DO-ALL, C-916A
MILLS, VERTICAL
GRINDERS, ROTARY
48"
SAWS, BAND, HORIZONTAL
MILLS, TURRET
DRILLS, RADIAL
20" X 48"
WDM (2008), Initial Pinch
HECKERT, FSS 440, V1/2
3’
GRINDERS, CYLINDRICAL
NIAGARA, L351P, IP, 4 Roll, Manual Adj & Drop,
10ga x 5’
HYD-MECH, S-20 M Series 111
MILLS, UNIVERSAL
14"x 44"
TENNSMITH, SR48P, 3"roll, Slip, 3/4hp
12ga x 4’
MACHINING CTRS, UNIV
HURCO C-40-U, 5 AXIS CNC (2004)
135T X 12' ATLANTIC HD135-12-10 Hydraulic
1-1/2"x 48" TECHNIDRIL, Series 200 Gundrill
16ga x 4’
HERMLE, C800U (2001), 5-axis
DIACRO, 16-96, CNC BG, 9"SH, 3"adj, 9"thrt, 3hp, 220v
135T x 8’
2"x 2"x 3/16"TAURING, Alpha 40, CNC
Z-27", ATC-180
LEADWELL, MCV 760 XL
35T x 8’
90T x 10’
AMADA, Virpos 2510 (2000), CNC
33 Ton
36"
BRAKES, PRESS
22.5 Ton
45 Ton
BLISS, C-45, HS, 29" x 19"bed, 2-1/2"stk
PRESSES, OBI
1/2" x 12’
CINCINNATI, 48"digital FOPBG, 18"gap, 40spm, 20hp
1/2" x 12’
CINCINNATI, 4H12, 12’sq arm, 2 front suppts, 25hp
5/8" x 8’
CINCINNATI, Mech, 48"FOMBG, 8’sq arm, 40spm
VDF
75 Ton
MINSTER, No.7, c/w AC
5/8"x 8’
CINCINNATI, Mech, ROMBG
GEMICO, 1760
250 Ton
NIAGARA, 8"stk, 22-1/2"SH, 35"x58", 35spm, A/C
5/8" x 10’
CINCINNATI, Hyd, 36"FOPBG, 18"gap, 14spm
HITACHI SEIKI, 7D, 6-1/4"hole
320 Ton
MORI (2001), Fine Blanking Press
5/8" x 12’
CINCINNATI, Hyd, 48"FOPBG, DRO, 18"gap, Power Rake
PROSTAR 6250
PRESSES, STRAIGHT SIDE
LATHES, N/C & CNC
GOODWAY GT-25, CNC (1999)
250 Ton
MISCELLANEOUS
BLISS, 12"stk, 38"SH, 6"adj, 30spm, 440v
Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
TAKISAWA, TS-20, CNC
250 Ton
SMERAL, SSDC
CMM Machine
WASINO, LJ-63M (1988)
300 Ton
DANLY, SSDC, 24"stk, 39.5"SH, 20spm
Feeder
OKUMA, 14.1" x 23.6" LT25 (1999), 4-Axis
300 Ton
ROUSELLE, 102x48, 14"stk, 31"SH, 8"adj, 35spm
ZEISS Contura G2 Aktiv (2010)
IEMCA Prodigy 547, 6ft bar length.MAG CAP
15.75"(3/16"-2")
VDF, DN 820, 32"x 72", CNC
300 Ton
USI CLEARING, 16"stk, 52"SH, 20"adj, 20spm, 40hp
Press H&A
VDF, V800, 42"x 72", CNC
300 Ton
VERSON, 12"stk, 30"SH, 10"adj, 20spm, 60hp
Comparitor
30" Optical, JONES & LAMPSON, DRO
350 Ton
BLISS, 16"stk, 12"adj, 38-1/2SH, 30spm, 15"bolster
Phase Converter
RONK, X6
500 Ton
BLISS, 12’stk, 40"SH, 25spm, 75hp
Coil Line
AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
MACHINING CTRS, HORZ
MITSUBISHI, MH-50C (1989), 158 ATC
APPRAISAL SERVICES
-
60 Ton DAKE
AMEA & USPAP CERTIFIED
CNC MACHINE TOOLS * PRESS BRAKES * SHEARS * TURRET PUNCHES * BENDING ROLLS * IRONWORKERS * NOTCHERS * BENDERS
Page 8
14
Page
Clue July,2012
2014
CLUE, November
MACHINERY IN INVENTORY
THE MACHINE TOOL SPECIALISTS
Full range of new and used machinery
Partial Inventory List
VISIT OUR WEBSITE TO VIEW OUR EXTENSIVE INVENTORY
BRAKES
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
FINTEK
FINTEK
FINTEK
FINTEK
FINTEK
FINTEK
MAKO
MAKO
FINTEK
USED
USED
LAPOINTE 240 CNC "240"
LAPOINTE SHRE 180 50 HP "180"
USED
USED
USED
MEUSER
SUNLIKE
RABOMA
USED
USED
USED
USED
USED
USED
TOS
OFA-32A
TOS
OFA-32A
NEWARK
HAVLIK
Y3150
DRUMMOND
GOULDER MIKRON
"12.5"
"12.5"
"12"
"19"
3A-MAXICUT
IL600
USED
USED
USED
USED
USED
USED
SIRCO
PSGS-18
INGAR
RT-612
CHEVALIER II F90-3420
YOUIL
96A
QMTW
QCM-20AH
NICCO
NSG-6H
"6" X 18"
"6" X 12"
"8" X 18"
"20" X 32"
"6" X 15", HYD"
"24" X 12"
NEW
USED
USED
USED
USED
PIRANHA P50
MAKO
55T
KINGSLAND 65XA
SUNRISE 1W-45A
MAKO
I-100T
50 TON
50 TON
65 TONS
45 TON
100 TON
NEW
NEW
NEW
NEW
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
NEW
USED
USED
USED
MAKO
LD-1340-E "13" X 40"
PROTURN L-22100
"22" X 100"
PROTURN S1760
17 X 60
KING
KC-1640ML "16" X 40"
CAZENEUVE
HB575
"20" X 60"
SWIFT
15 VS
"32" X 16 FT"
DARBERT 580X2000 "22" X 80"
DEANSMITH & GRACE 1910X50
"24" X 48"
PROTECH 1236
"12" X 36"
COLCHESTER
14
"14" X 40"
SOUTH BEND
CL-145-8 "13" X 40"
YANG ACE 1440
"14" X 40"
DEAN SMITH & GRACE 1307 X 40 "17" X 60"
TOS
SN40C
"16" X 40"
COLCHESTER
MASTER 2500 "13" X 40"
CAZENEUVE
HB500
"18" X 56"
BAOJI
CS26 GC "26" X 80"
SIRCO
PA-20
"20" X 65"
OKUMA
LS
"20" X 60"
TOS
SN-40A
"18" X 83"
SIRCO
PA-20
"20" X 60"
BEMATO BMT-430X1100
"16" X 40"
DALIAN
CKE6146Z/1500
"18" X 60"
OKUMA
LC-40-1SE
STANDARD MODERN 1640
"16" X 40"
OKUMA
LR-35
TWIN TURRETS
USED
FADAL
BROACHING
NS-9616
8' X 20G
V-412-6
4' X 12G
NU-4816
"48" X 16G"
NS-9620
8' X 20G
NS-4816
"48" X 16G"
V-1016
"120" X 16G"
U4822
"48" X 22 GAUGE"
U-4822
"48" X 22 GAUGE"
VH-1010-6HC "120" x 10G, HYD. LEAF"
RADIAL DRILLS
GEAR
M30R
RD-1100
"44"
"43" ARM"
"48" ARM"
LATHES
MACHINE CENTERS
VMC4020
MAZAK
MAZAK
NEW
NEW
NEW
NEW
NEW
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
USED
FIRST
LC-20VSG KNEE MILL
FIRST
LC-185VSX-B KNEE MILL
MAXIMART MX-B51V BED MILL
MAKO
MD-30BV MILL-DRILL
FIRST
LC- 1 1/2 VS KNEE MILL
FIRST
LC-205-VSA KNEE MILL
FEXAC
UG
"14" X 63"
BRIDGEPORT
SERIES I "9" X 42"
ANAYAK-DOALL
FVH-205
"12" X 53", UNIVERSAL"
JAFO
FWD32JM "12" X 46", UNIVERSAL"
LILIAN
3VH
"10" X 50"
BRIDGE PORT
86811
"9" X 42"
LILIAN
3VH
"10" X 50"
LILIAN
2VS
"10" X 50"
FIRST
LC-185 VSX-B
FAGOR DRO
LILIAN
3VII
"10" X 50", CNC"
NEW
NEW
USED
USED
USED
USED
USED
USED
MVD
HAP 35/160 12' X 176 TON
MASTEEL MBHSA-14500 14' X 500 TON
PROMECAM PPH25.12B 4' X 25 TON
PREMIER 670
6' X 70 TONS
ALLSTEEL 120-10
10' X 120 TONS
ALLSTEEL 600-12
12' X 600 TON
ALLSTEEL 400-12
12' X 400 TON
FEMAS
PHS-30
"66" X 30T"
NEW
NEW
NEW
NEW
NEW
NEW
NEW
ALROLL
FINTEK
ALROLL
FINTEK
AKBEND
ALLROLL
FINTEK
PR-0440H 4' X 9 GAUGE (5/32)
R-5016E
"50" X 16G"
ALROLL PR-0545H
"5' X 3/16"
R-5016
"50" X 16G"
AHS 30/13 "10' X 1/2"
HR-0510
"6'X3/8"
R-2420
"24" X 20G"
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
USED
SPEEDER
WAYTRAIN
WAYTRAIN
WAYTRAIN
WAYTRAIN
WAYTRAIN
WAYTRAIN
WAYTRAIN
WAYTRAIN
PLUS
HYD-MECH
RF-250S
9 X 18 SWIVEL
UE-918SSA 9 X 18 SEMI AUTO
W1824SSA "18" X 24" SEMI AUTO"
W1318 SSAV "13" X 18" SEMI AUTO"
UE712G
"7 X 12, GEAR DRIVE"
UE712SG "7 X 12, SWIVEL, GEAR"
W1318S
13 X 18
WS-1318FA 13 x 18 AUTO
UE-916A "9" X 16"
P24-40
"24" X 40"
S-20
"13" X 18"
NEW
NEW
MAKO
MAKO
KB-30
KV-50
NEW
NEW
NEW
SPEEDER FHC-275 "14"
LINMAC
CS-350
"15.75" "
FONG HO FHC-355P "14" NON FERROUS"
NEW
NEW
NEW
NEW
USED
MASTEEL MSH-10250
ALSHEAR P-12014
ALSHEAR P-5210
ALSHEAR P-80
ACCUSHEAR
"10' X 1/4"
10' X 14G
"52" X 10G"
"80" X 10G"
625010
"10' X 1/4"
USED
USED
USED
MORANDO VS-12
MONARCH VTN-10
MORANDO VS-9
"48" CHUCK"
"47" CHUCK"
"39" CHUCK"
MILLINGS
VQC-15/40 4TH AXIS
SV-25
"68" TABLE"
PRESS BRAKES
"19"
GRINDING (SURFACE)
IRON WORKERS
USED
USED
ROLLS
SAWS (BAND, HORIZONTAL)
SAWS (BAND, VERTICAL)
SAWS (COLD)
SHEARS
VTL'S
"12"
"20"
We will buy your surplus machines or complete plants
1731 Rte Hardwood, Vaudreuil-Dorion, Québec J7V 8P2
Tél: 514-935-3531 • Fax: 514-932-4459 • Toll Free 1-800-962-3531 • www.seguinmach.com • [email protected]
Clue July, 2014
Page 15
Latest Installation by FERRIC Machinery
Speed Bend 3100x135 press brake at
TMS Lighting, Brampton, ON
A world leader in decorative lighting by its very
nature the demand for special concepts and
designs requires special designs and
fabrication methods to fullfill the just in time
requirements from their customers.
The investment in the FERRIC-ERMAK 7 axes
press brake with ER90 2D full 3D graphic
control, will produce quality bended parts
delivered by the R&D department direct to the
machine, down sizing the setup times on the
machine.
Z9000 MISCELLANEOUS
All FERRIC products are sold with installation and training.
Local service by our FERRIC service team.
For more information on the FERRIC-ERMAK products visit:
FERRIC Machinery Inc.
Z9000 MISCELLANEOUS
MUST SELL
w w w.ferricmachinery.com
3980 Chadburn Cres, Mississauga, ON
Tel: 905-820-3232 [email protected]
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Westside Service Ltd.
4406 58th St S, Lethbridge, AB
Tel: 403-380-5047 [email protected]
Contact: TCL Asset Group Inc.
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent by
third class mail on or before the business
day following the seventh of each month
DEADLINE
The deadline for advertising is the day
following the last Wednesday of the month
ADDRESS
343 Smith Ave
Burlington, ON, L7R 2T9
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
Ph: 416-736-1367 x228
Website: www.managingyourassets.com
CHUCKS
MATSMOTO, HA-6-8-46, 8" Power chuck
DRILLS
ARBOGA, A3808, Geared head
DONAU, DR40-Z rapid radial drill
SAALFELD, BS50 Pillar drill, 2" capacity
GEAR HOBBERS
MIKRON, 79 small
GRINDERS, CYLINDRICAL
LANDIS, 4"x 18"
TOS, BHU25, 10"x 24"
JONES & SHIPMAN, 10"x 27"
MORI SEIKI, SL3
NAKAMURA TOME, TMC-15
NAKAMURA TOME, SL-JR
LATHES, ENGINE
LANSING, TAD-FS-650, 53" facing lathe
FEELER, FTL-618, 11"x 18" precision lathe
CLAUSING METOSA, C1340, 13"x 40"
ACRATURN, 14"x 40"
TOS, SUI40/1000, 16"x 40"
CHIEN YEH, CY500G/1500, 20"x 60"
TOS, SN50B, 20"x 80"
TOS, SN63/2000, 24"x 80"
MORANDO, 24"x 120"
PHONE
FAX
PBR, TM-300, 24"x
196"
ADVERTISERS DIRECTORY
GRINDERS,
INTERNAL
COMPANY
OVERBECK, Zetto-30
GRINDERS, SURFACE, RECIPROC
Alberta
BROWN & SHARPE, 6"x 12"
HYUNDAI, VX-400, 18"x 40" (2011)
FADAL, VMC2040, 20"x 40"
ACC-618,
18" Hydarulic
BOKAMOTO,
F G Machine
Tools6"xInc.,
Edmonton (Brian) ...................................780-434-7795
........780-436-0717 .......15
MILLS, VERTICAL
NICCO, NFG-515HD, 6"x 20" Form grinder
British
Columbia
GRINDALL, 16"x
28" Hydraulic
FIRST, LC 1 1/2VS, 9"x 42"
DELTA, 9"x 49"
ECCOGRINDERS,
Machinery,TOOL
Surrey
(Rick) ......................................................778-298-2023
........778-298-2024 .......17
& CUTTER
TOPWELL, VK 4, 10"x 50"
CHEVALIER,
KAO FONG, ST-22, 12"x 50" Horz/Vert
Modern
ToolFCG-510
(BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444
........604-472-1455 .......16
CHRISTEN, AU-100
TOOLING
HASBERG, FS5 Cutter
Ontario
WAHLI, MXH 300/200 Tool setter
GRINDERS,
MISCELLANEOUS
Brighton
Machinery
Sales Inc, Ingersoll (Brian)...............................519-485-7089
LYNDEX, E348 Elba tool setter ........519-485-7368 .......15
BLANCHARD, 16" Vertical surface grinder
MISCELLANEOUS
Cameron
Steel, Lindsay (Bob) ........................................................705-878-0544
........705-878-0560 .......21
KEYSEATERS
Centering & Facing Machine, SENECA FALLS, CS, Lu. Swing
MORRISON
Compumachine
Canada, Toronto (Peter).........................................416-291-9499
........416-291-4990 .......22
Coordinate Measuring Machine, MITUTOYO, FN-905CMM
LATHES,
CNCInc, Toronto (Daphne) .........................................416-962-9600 ........416-962-9601 .......27
Corporate
Assets
End
Finishing
Machine,
SOCO,
EF-PV/52
NAKAMURA TOME, TMC-20, 8" chuck CNC
Parts cleaner, HOTSY, 7630 ......................................10
Dipaolo
CNC
Retrofit
Ltd., Mississauga
(Nelson) ............................905-676-9265
DAEWOO,
10 HC
CNC Turning
Centre
Parts cleaner, HOTSY, H20-2836
MIYANO,
BNC-34TTool
dual turrets
Fabtec
Machine
Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054
.......18
Thread Rolling Machine, SHENG JIAN, Z28-63
COLCHESTER, Tornado 90, 10" (2004)
Ferric
Machinery
Inc,
(Koen) ......................................877-337-7424
COLCHESTER,
Storm
90,Mississauga
10" (2000)
Tilting box table, 30"x 24"x 22" ........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087 ........905-828-2062 .......26
EQUIPMENT
APPRAISALS * Toronto,
Ontario .......13
Havlik Int’lCERTIFIED
Machinery, Cambridge
(John) ........................................519-624-6240
........519-624-4119
Phone:
(905)
793-8080
Fax:
(905)
793-2190
Email:
[email protected]
Hayden Lee, Markham (Hayden) ....................................................905-201-7841 ........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910 ........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie)......................................905-669-8893 ........905-669-7512 .........2
Clue July,.......12
2014
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890 ........905-876-1959
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
WWW.SKBRALY.COM
Page 16
PAGE
MACHINING CTRS, VERT
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
MODERN TOOL BC LTD.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
DURMA AD-R37175 CNC
Hydraulic Press Brake
HYD-MECH S-20A III
Automatic Band-Saw
SCOTCHMAN 6509-24M
Hydraulic Ironworker
DURMA PBH-180
Profile Bending Machine
On the web @ www.moderntoolbc.com
Follow us on Twitter @ModernToolBC
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
Service & Parts Sales | Toll-Free: 1-800-717-1440
AIR COMPRESSORS
LATHES
SAWS, BAND, VERTICAL
Hydraulic Pump
CHIEN-YEH 14"x 36" 24" gap
MACC (350) 2spd, Cold cut saw
Industrial Fan, VARY 4’ x 4’
URPE 14"x 60"
CLIPPER (BBC156) 14" Concrete saw
SUNNEN (Dial) bore gauge
KING
TOS (SV18RA) 15"x 60"
EISELE 16" Cold cut saw
MITUTOYO height gauges, assorted styles
ALLEN drill press, 3ph
VOEST 17"x 60"
GROB 36" band saw
Wet Soda Blaster 38 x 41 x 38
ROCKWELL
COER (PG900) 36" x 14’
RIGID (MS1065LZA) 10" compound mitre saw
Assorted Rotary Tables
MAKITA 14" Chop saw, single phase
Mag. Lathe Chuck, ECLIPSE
JUN AIR 15 litre 120psi
DRILLS
YAMAGUCHI
MILLS, UNIVERSAL
ARBOGA (G1304) Bench top drill
HONEYWELL Light curtains
VERMAN
BRIDGEPORT 9"x 32" R8 taper
HERBERT 15" 3ph
HASCO 9"x 42" R8 taper
KAO MING (KMR700DS) 28" R/A Drill
SIMA ROSSI (VO) 10"x 48" 40 taper
FORK LIFT TRUCKS
MITSUBISHI 5000lb 4stage mast, side shift,
propane
FIRST (LC-20VSG) 10"x 51" 40 taper
TOS (FA3AV) 12"x 54" 40 taper
PRESSES
SHEARS
PEARSON 3/8"x 10’ hyd shear, w/ squaring
arm, sheet support, FOBG
WELDERS
Assorted Demagnetisers
HILTI (DXA40 driver) w/ XHN date stamp
attachment
Bead Rolling Machine, CMZ7, 114v, single ph
LINCOLN Powerwave Arclink 455M
Disc Sander, Master 24"
MILLER (250P) Stick welder
Pressure Washer, PSC 600v, 3ph
AERCOLOGY’S WELDAIR (WA1000CP)
Assorted Measuring Tools
TCM 10000 lb Propane, 3stge mast
ARBOR (#2)
Assorted Pallet Trucks
GREENERD (#3a) Arbor Press
THERMAL ARC (PAK 5Xr) Plasma cutter
Torque Wrench, PROTO 600 ft/lbs
HYSTER 15000 lb propane
JET (#3) Arbor Press AP3
MILLER (Coolmate 4) Water cooler
Collet sets
B&B 25T Punch Press, 3ph
ARCWELD (G022263) 230/460/575
Assorted vises
BUFFALO 100T H press
MILLER (Big Blue 251) diesel portable welder
Assorted Chain Hoists
CANOX Arc Welder
Threading Caddy, RIGID
GULLCO welding positioner
Recoilers, DURANT
GRINDERS
HARIG (612) Surface grinder
JONES & SHIPMAN (540) 6"x 18" Surface
grinder, Hyd
BALDOR 3/4hp pedestal grinder
THOR Pedestal grinder
Smoke eater
ROLLS
B&B 36" x 18ga Hand Rolls
SAWS, BAND, HORIZONTAL
GREENLEE (1346) 7"x 10" single phase
MISCELLANEOUS
Assorted Transformers
Angle Plates
Magnets, 800-1000kg
Hardness Testers
Phone: 905-634-8442 Fax: 905-681-6940
4280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
Clue July, 2014
Page 17
CLASSIFIED -
LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765
Fax: (905) 917-0222
Sales Job Available in Quebec
Machine Tool Sales Engineer
Proactively increase Machine Tool sales for our
company through both quality customer service and
new customer outreach. Daily activities will include
calling customers by phone (prospecting), conducting
face to face meetings (sales calls), assessing customers’
needs and requirements, preparing quotations and
closing sales.
Job Qualifications: A minimum of 1-2 years of
experience in the field of Industrial Machine Tool Sales
or related industry is preferred.
Phone: 905-676-9265
Email: [email protected]
Excellent Benefits Package
B1480 BENDERS
5-1/2" ENERPAC, , Hyd. Pipe bender, w/asst’d tooling, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
B5400 BORING MILLS, HORZ, FLOOR
5" UNION, BFP130 CNC, X-180" Y-98" Z-39" W-14", c/w
Heidenhain TNC 425 4-Axis, (Boulanger Machinerie Inc
Tel: 418-428-4709, Fax: 418-428-4710)
5.12" PEGAR, AF.13 TA, X-102" Y-70" Z-95" W-45", Call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
5.12" TOS, WD-130, Floor type, Acu-rite DRO, Call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
B5500 BORING MILLS, HORZ, TABLE
3" MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
4" STANKO, , Rotary Table, ISO 50, 3-Axis DRO, (Boulanger
Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
5" UNION, BFT 125/5 (1976), 71"x 79", XYZ-100"x 79"x 71", Rot
tbl, fcg hd, mlg hd, Ref# 2376, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
B6968 BOX & PAN
88 Ton AMADA, FBD8025 (1996), NC9EXII 3-Axis CNC, Ref#
10060, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton x 8’-6" “NEW” FERRIC, Power Bend 2600-80, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
88 Ton x 8’-6’6" HACO, PPM2575, 2-axis ATL 500, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,
Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
110 Ton AMADA, RG100 (1990), NC9EXII 3-Axis BG, Ref#
9892, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
110 Ton AMADA, HFB 1003/8 (1998), Operateur Multi-axis, Ref#
9895, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
110 Ton x 10’ JINLI-FARINA, , digital, mint cond., call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
110 Ton x 13.5’ GASPARINI, , XR Backgauge, CNC Crown,
Cybelec Control, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
125 Ton x 12’ ALLSTEEL, , No Back Gauge, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
132 Ton TRUMPF, 3120 (2012), 4-axis, T3000VA, Ref# 10035,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
132 Ton TRUMPF, 3120 (2011), 4-axis, T3000VA, Ref# 10036,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#
9978, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
143 Ton x 10’ (2) HAMMERLE, (2001), 6-Axis, 13” Stk., (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke
Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
151 Ton SALVAGNINI, CPR135-3000 (2003), Roboformer
Bending Cell, Ref# 9521, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
176 Ton x 10’-8’4" “NEW” FERRIC, Power Bend 3100x160,
3-Axis, CZ142-04 Compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
176 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-160,
3-axis, CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2, Crowning,
Clamping, Ref# 10013, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
200 Ton x 4M AMADA, STPC200-40,, CNC 3-axis DNC7000,
tooling, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
220 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-250,
3-axis, CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
8’ x 12ga SAMPSON, , Hydraulic, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
B7000 BRAKES, PRESS
18 Ton x 15.75" TOYOKOKI, APB-184 (1993), Fully electric,
3-Axis, Ref# 10063, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
44 Ton x 6’ FABMASTER, , Hyd, 4 way die, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
44 Ton x 8’ FABMASTER, PPT 44-8, Hyd., (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
80 Ton x 8’ AMADA, ITPS080-25, CNC EMA 4-axis, (Machinery
S. Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
88 Ton AMADA, FBDIII8025NT (2001), Amada AMNC-PC, Ref#
9760, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, HFE8025 (2003), Operateur 7-axis, Ref# 9893,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
PAGE18
18
Page
CLUE,
July, 2014
2014
Clue July,
B7000 BRAKES, PRESS
L0850 LASERS
242 Ton AMADA, HFE2204/7 (2005), Operateur, Ref# 10059,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
USED MACHINERY
242 Ton AMADA, HFB2204 (1999), Operateur, Ref# 9897,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
243 Ton x 161" AMADA, HD2204LNT (2011), Installed New
2014, Ref# 10068, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69 6-axis,
Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
300 Ton x 20’ ALLSTEEL, , Hydraulic, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
350 Ton x 12’-10’ “NEW” FERRIC, Power Bend, XR, CNC
Crown, 2D Graphic, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
357 Ton TRUMPF, V320 (2000), Delem DA65, Ref# 10027,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
DRILLS, RADIAL
• TONEFAN, 36” x 4MT
• HECKERT BOWES, 4’ x 5MT
• DONAU, Universal
GRINDERS
• KENT, 8” x 16” Manual Surface Grinder
• CHEVALIER, Tool & Cutter
• DECKEL, End Mill SO
• HEINMAN U2, Cutter
• CHRISTEN, Tool & Cutter
LATHES
• COLCHESTER, 13“ x 25”
• HARRISON, VS330TR, 13” x 30” VS
• HOWA, 17” x 40”
• DARBERT, 18” x 80”
400 Ton x 14’ PACIFIC, , Hyd, 12’ B/H, very nice condition,
dismantle, $35,000, (Soudogaz Tel: 418 889-2002, Fax: 418
889-2012) See Page 21
25 TM KONE, , 45’ span, 68’ Lifting height, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
30 TM KONE, , 56’-7’’span, 75’ lifting height, remote control,
(Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
40 Ton KONE, , 47’ span, 75’ lifting, 2x20t hoist, remote control,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
50 TM KONE, , 2x25T hoist, 45’ span, 68’ lifting height, remote
control, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
, 150’ run way for 30 & 50 Ton crane, including rail, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
D5700 DRILLS, RADIAL
4’ KITCHEN & WADE, E-24, MT5, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
5’ STANKO, 2M55, MT5, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
E2400 ELECTRIC DISCHARGE MACHINES
SODICK, AQ325L (2001), Sodick LN1W CNC, Linear Drive, Ref#
9853, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
E2425 EDM, CONVENTIONAL NC/CNC
50 Amp ARISTECH, , CNC, Sinker, 25.6"x 13.8" table, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
F3250 FORK LIFT TRUCKS
15,000lbs HYSTER, S150A, LPG s/n A024002247T, $11,500,
(Canadian Crane & Hoist Mfg Ltd Tel: 705-726-5951 ext.225,
Fax: 705-726-2434)
CLUE,
April
2014
Clue
July,
2014
• JARRO CNC Ram Mill Fynson, Heidenhain
• HAAS VFO-E VMC
MILLS, VERTICAL
• FIRST, DRO
• FIRST HOR-VERT-DRO
MISCELLANEOUS
• SUNNEN 1804, Hone
• DO ALL C916A, Auto saw
• STARTRITE, 24” Bandsaw
• LYNDEX Tool Presetter
• WAHLI, Tool Presetter
1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
C6306 CRANES & HOISTS
15 TM KONE, , Under running, 2x7.5TM hoist, 32’ span, 26’
lifting height, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
CNC MILLS
POWERMASTER MACHINERY LTD.
Tel: 905-624-9327
5 Ton R.REDDY, , Top running, 48’2"spam, 20’ lifting, 2sd, Call
for price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
7.5 KM KONE, , Under running, 32’ span, 26’ lifting height,
(Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
• TOS SN50, 20” x 80”
• FEELER TOOLMAKERS (Hardinge Type)
• YUNNAN, 26“ x 120” x 4“ bore, DRO
Fax: 905-624-8591
e-mail: [email protected] website: www.powermaster.ca
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric, Gas,
Oil, Propane, for all purposes, (Park Thermal International
Tel: 905-877-5254, Fax: 905-877-6205)
G4706 GRINDERS, CYLINDRICAL
12"x 16" PARKER MAJESTIC, 1C, Universal, Ref# 9882,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
G8025 GRINDERS, SURFACE, RECIPROC
CHEVALIER, FSG-1632AD, New in 1999, Good condition, (B W
Guild Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
CHEVALIER, FSG-1632ADII, New in 2005, c/w Over the wheel
parallel wheel dresser, Very good cond., (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
8"x 18" CHEVALIER, FSG-3A818, Fully auto, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
16"x 24" DARBERT, (1998), Auto. Downfeed, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
G9030 GRINDERS, MISCELLANEOUS
AMADA, Togu III (2006), Automatic Punch & Die Grinder, Ref#
9964, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
I6200 IRONWORKERS
50 Ton FERRIC, , Single Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
65 Ton FERRIC, , Single Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
80 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
100 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
125 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
80 Ton HMI, 8010-25, New, Call for price., (Soudogaz Tel: 418
889-2002, Fax: 418 889-2012) See Page 21
125 Ton KINGSLAND, , dual operator, Included tools, c-channel
table & elect. back gauge, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
45~175 Ton HILALSAN, , call for price, (Soudogaz Tel: 418
889-2002, Fax: 418 889-2012) See Page 21
K3004 KEYSEATERS
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2", (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
L0850 LASERS
1500 Watt MAZAK, STX510 (1999), 5’ x 10’, Approx. 70,00hrs,
Mazak Refurb 2010, Ref# 9230, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
1500 Watt AMADA, Pulsar LC2418AII (1997), Fanuc 16L, 72" x
198", Ref# 9982, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt TRUMPF, L2030 (2007), integrated load/unload
automation, Ref# 9589, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC2415XLA3 (2000), Current
machine hrs: 47,600, Ref# 10008, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#
9955, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
2000 Watt CINCINNATI, CL-6 (2000), 5’x 10’ Dual pallet, Fanuc
C2000, chiller, Ref# 10019, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC2415XLA3 (2000), 61"x 198"
w/Repo, Ref# 10058, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC2415XLA3 (1998), Current
Machine hours 47,600, Ref# 10008, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, Ref#
10024, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
PAGE19
19
Page
L0850 LASERS
L6135 LATHES, N/C & CNC
2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, 38,
100hrs, Ref# 10025, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2500 Watt AMADA, Pulsar LC2415NT4 (2010), Approx. 9000hrs,
Ref# 10062, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2500 Watt AMADA, Pulsar LC2415NT4 (2008), Approx. 5900hrs,
Ref# 10067, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483 Beam
on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3KW AMADA, Altair LC2412 (1999), 10 shelf storage system,
Load/unload, Ref# 9979, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2007), CNC, approx.
15,000 hours, Ref# 9889, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, LC3015F1NT (2008), 5’ x 10’, Ref# 9779,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO4020NT (2005), 6’ x 12’, Approx.
22,454hrs, Ref# 9774, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt MAZAK, Hypergear 510 (2008), Approx. 25,000hrs,
Ref# 9912, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Pulsar LC2415XLA3, 61"x 198", w/Repo,
Installed New 2004, Ref# 9908, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt BYSTRONIC, Bystar 4020 (2000), 6’ x 12’, 72,600
hrs, Ref# 10020, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2004), 5’ x 10’, 24K
Turbo blower w/8K hrs, Ref# 10012, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,
Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, LC3015CII (2008), Theta 5-axis, No rotary
chuck, Ref# 9953, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
ADVERTISERS DIRECTORY
COMPANY
Alberta
FAX
PAGE
B F G Machine Tools Inc., Edmonton (Brian)....................................................... 780-434-7795 ...............780-436-0717................18
British Columbia
ECCO Machinery, Surrey (Larry) ......................................................................... 877-513-1773 ...............778-298-2024................18
Fastcut CNC Inc., Kamloops (Russell)................................................................. 866-339-3377 ...............250-314-0590................12
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ...................................................... 604-472-1444 ...............604-472-1455................17
Ontario
B W Guild Equipment Inc, Kitchener (Barry)........................................................ 519-624-9806 ...............519-893-3125................18
Brighton Machinery Sales Inc, Ingersoll (Brian) ................................................... 519-485-7089 ...............519-485-7368................18
Corporate Assets Inc, Toronto (Marketing) .......................................................... 416-962-9600 ...............416-962-9601................27
DiPaolo Machine Tools Ltd., Mississauga (Nelson).............................................. 905-676-9265 ...............905-676-9436................10
Fabri-Hermann Machines Inc, Cambridge (Karl).................................................. 519-623-1987 ...............519-623-3724................18
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................................... 905-469-1586 ...............905-469-3054................18
Ferric Machinery Inc, Mississauga (Koen) ........................................................... 877-337-7424 ...............905-820-3234..................1
Havlik Int’l Machinery, Cambridge (John)............................................................. 519-624-6240 ...............519-624-4119 ..................2
Infinity Assets Solutions, Concord (Leslie)........................................................... 905-669-8893 ...............905-669-7512..................6
L S Walker Machine Tools Inc, Milton (Chris)....................................................... 905-876-0890 ...............905-876-1959................22
Machine Solutions Inc., Guelph (Andrew)............................................................ 416-220-5910........................................................ 8
Natex Machinery Group Inc., Brampton (Alex) .................................................... 905-789-0070 ...............866-386-3281..................3
Park Thermal International, Georgetown (Sales)................................................. 905-877-5254 ...............905-877-6205................18
Paul Machinery, Burlington (Paul)........................................................................ 905-634-8442 ...............905-681-6940................17
Phase Quest, Mississauga (Harold)..................................................................... 416-578-5399 ...............416-753-7209................18
Powermaster Machinery Ltd, Mississauga (Peter)............................................... 905-624-9327 ...............905-624-8591................13
S K Braly Machinery Inc, Mississauga (Steve) .................................................... 905-793-8080 ...............905-793-2190................16
SMTCL Canada Inc., Oakville (Merry) ................................................................. 905-829-1579 ...............905-829-8692................26
Sabito Machinery Inc, Vaughan/Concord (David)................................................. 905-738-8730 ...............905-738-5148................14
TCL Asset Group Inc, Toronto (Norm) ................................................................. 416-736-1367 ...............416-736-4159................25
TOS Trade Canada Inc., Milton (Marian) ............................................................. 905-878-0888 ...............905-878-9022..................9
Trader Machinery Inc, Concord (Jonathan).......................................................... 905-669-7507 ...............905-669-7512..................4
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................................... 418-428-4709 ...............418-428-4710................18
Machinerie Gilles Lupien, Drummondville (Gilles)................................................ 819-478-5266 ...............819-478-5266................23
Machinery S. Tremblay, Drummondville (Sylvain)................................................ 819-477-6677 ...............819-477-6466................18
Seguin Machinery Ltd, Vaudreuil-Dorion (Noel) ................................................... 514-935-3531 ...............514-932-4459................15
Soudogaz, St-Lambert de Lauzon (Charles)........................................................ 418 889-2002................418 889-2012 ................21
Stock Machine Tools Co, Laval (Andre)............................................................... 514-326-7006 ...............514-329-2599................18
USA
Y.Franke & Company, LLC., Hoffman Estates, IL (York) ...................................... 847-874-8972 ...............847-596-8006................28
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan) ..................................... 845-398-0073 ...............845-398-0074..................7
L3000 LATHES, ENGINE
4000 Watt AMADA, Gemini FO-3015 (2001), 5’x 10’, Ref#
10042, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3
& 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,
Approx. 1000hrs, Ref# 10028, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
13"x 40" COLCHESTER, , Toolroom, 8” 3-jaw chk., (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,
Approx. 1000hrs, Ref# 10029, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
15"x 40" FAMOT, , Toolroom, DRO, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
4000 Watt TRUMPF, TCL3030 (1999), Siemans CNC, 60"x 120",
Ref# 10040, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
PHONE
17"x 60" YAM, , 10" 3-jaw chk, 2" bore, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
50"x 120" SUMMIT, , 6"spnidle, 4 jaw chuck, DRO, (Soudogaz
Tel: 418 889-2002, Fax: 418 889-2012) See Page 21
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"
Bar cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MAZAK, (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach.
Length, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
FORTUNE, V-Turn II 26 (2006), Autostrong 3-jaw, Fanuc 0i-TC,
Excellent, (B W Guild Equipment Inc Tel: 519-624-9806,
Fax: 519-893-3125)
4000 Watt AMADA, Gemini FO-3015 (2003), 5’x 10’, Ref#
10055, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
TOS, SN-55B, 22" Swing, 32" in Gap x 156" Centers, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 23
4000 Watt AMADA, Pulsar 2415NTA4 (2008), 8900hrs, Ref#
10057, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
23"x 80" VDF, E3H (1976), 14"OCS, 3-1/8"sp bore, 15hp. taper,
Ref# 2033, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
25"x 110" STANKO, (1995), 16" 3-jaw chk, steady rest, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
CHEVALIER, FCL-1740, Fagor 8055 CNC, Combination
CNC/manual lathe, (B W Guild Equipment Inc
Tel: 519-624-9806, Fax: 519-893-3125)
MAZAK, FMS-A48-12 (2000), Shelf Loader, Ref# 10026, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
DMG, CTX310 (2005), 13"sw, Live tools, Fanuc 32i, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
MAZAK, FMS-510 (2002), Load/Unload system w/10 Shelf tower,
Ref# 10030, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
40"x 315" STANKO, , Superb shape, 4 jaw chuck, $34,000,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
PAGE
20
Page 20
OKUMA, Captain L470 (2003), Kitagawa B212, Excellent, (B W
Guild Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
MORI SEIKI, CL-25B (1996), MSC-521 Control, (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
CLUE,
April 2014
Clue July,
2014
L6135 LATHES, N/C & CNC
24" Swing HARDINGE, Conquest 51 (2001), C-axis & Live tools,
Fanuc 21-IT, 60-6000 rpm, 9’’x 23’’ turning cap, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 23
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed
20", Mint cond., (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
16"x 40" MICROWEILY, TY-1540D (2007), Teach-Turn CNC
toolroom, Fagor 8055TC, 7-1/2" 3 jaw chk, V8 hyd turret, Ref#
2331, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
20"Sw, 23.6"ctrs GILDEMEISTER, CTX410 (2007), Fanuc 32i,
3D, Live Tool, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
26.8"Sw, 41.2"ctrs GILDEMEISTER, CTX510 (2004), Fanuc
21iT, 10"chk, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
P5102 PRESSES, HYDRAULIC & AIR
BUYING/SELLING
MANUAL OR CNC
MACHINE TOOLS
IRONWORKER
BANDSAW
DRILLING
PLASMA CUTTING TABLE
SOUCO
PLATE BENDING
SHEAR
BENDING ROLLER
PROFILE BENDING
LATHE
MILLING
PRESS-BRAKE
BORING
ETC...
CALL TOLL FREE
1 855 822-2002
AKYAPAK
27"Sw, 50"ctrs GILDEMEISTER, CTX600 Linear (2002),
Heidenhain iTNC, 15"chk, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6", Installed
2013, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
IAL
SPEC
E
IC
PR
50
$33,4
MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", Yasnac,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9", Ref#
9854, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
FADAL, Fadal 88 HS (1997), X-40" Y-20" Z-20", 10,000rpm,
22hp, 21ATC, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
CINCINNATI, Arrow 1000 (1997), Acramatic 2100, X-40" Y-20"
Z-20’’, 8000rpm, 21 ATC, $12,500, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
HARDINGE, VMC-1000 (1998), X-40" Y-20" Z-20", Fanuc OMD,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
BRIDGEPORT HARDINGE, (2007), X-40" Y-24" Z-24", Fanuc
18iMB, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
OKK, MCV-560 (2000), X-41" Y-22" Z-22", (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
M1550 MILLS, CNC
10"x 50" KING RICH, KR-V2500, Fagor 8055i CNC, NT40, VS,
APDB, Use in 3-axis CNC or manual DRO mode, (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
12"x 60" table EAST LION, EL-BT250/3ACNC, Bed Type,
50x21x21 Trvl, NT40 nose, 3600 RPM, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
14”x 76” KING RICH, KR-B4V, Bed-type, Fagor 8055i CNC,
NT40, VS, APDB, Use in 3-axis CNC or manual DRO mode,
(B W Guild Equipment Inc Tel: 519-624-9806,
Fax: 519-893-3125)
M1659 MILLS, UNIVERSAL
12"x 55" CMC, FU-2, Vert/Horz, 6.5hp, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
20"x 87" DAH-LIH, , 4-Axis Hedenhain DRO, 50 taper, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
CLUE,
April2014
2014
Clue July,
profile bending machine, model
APK 121, optional support
available, Other sizes in stock
Full automatic horizontal band saw ,
model 1824 FA, capacity 18 ‘’ X 24’’
M0185 MACHINING CTRS, VERT
DECKEL MAHO, DMU50T, 3 + 2, CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,
000rpm, ATC 18, CAT 20, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
IAL
SPEC
E
IC
PR
50
,9
9
4
$
AKYAPAK
HILALSAN
IAL
SPEC
E
IC
PR
00
$84,5
Hydraulic four roller plate bending machine, model
HAK-3013, 3000mm bending length, 13mm bending capacity
IAL
SPEC
E
IC
PR
50
$32,9
Ironworworker, model HKM-175, Capacity of
175 tons, two pistons / two foot pedals
WE WILL BUY YOUR SURPLUS MACHINES OR COMPLETE PLANTS
Visit us at:
www.soudogaz.com
143, boul. Léon-Vachon
St-Lambert-de-Lauzon
Québec, Canada
EMAIL FOR A QUOTE AT:
[email protected]
M1974 MILLS, HORIZONTAL
23"x 95" CINCINNATI, 525-20-HP (1964), powered vert o/a, #50
taper, pendant, Ref# 2288, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
M2075 MILLS, PLANER TYPE
64"x 244" STANKO, 7216-G (1982), 56"x 238"tbl, 71"btwn col,
58"max UR, gr hd, mlg hd, plr hd, side hd, Ref# 2399, (B F G
Machine Tools Inc. Tel: 780-434-7795, Fax: 780-436-0717)
M2824 MILLS, VERTICAL
10"x 50" TOPWELL, 5VK, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 54" FORWARD, , 40 taper, Newall DRO, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
N5230 NOTCHING MACHINES
(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
1/4" x 8.6"sq (NEW) FERRIC, , variable angle, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
O7397 OVENS
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P5102 PRESSES, HYDRAULIC & AIR
70 Ton DAKE, , H-Frame press, Air/Hyd, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Ovens
For Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
1/4" x 8.6"sq (NEW), , Fixed angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
PAGE
Page 21
21
P6100 PRESSES, OBI
R5603 ROLLS, PLATE BENDING
Email: [email protected]
Website: www.walkermachinery.com
BORING MILLS, CNC, HORZ, FLOOR
UNION (BFP 130 CNC) 5.12" (1994) 120"x 275", ISO 16 rotary table, floor plates, Heidenhain ctrl
BORING MILLS, HORZ, TABLE
KAO MING 30"x 60" (2007) 50tpr, 8,000rpm geared head, full enclusure, CTS, Fanuc 18i ctl
HARTFORD (PRO 4150) 60"x 157" 50 taper, 10,000 DDS, Fanuc, new 2012
MILLS
TIGERCUT (110 CNC) 4.3", 63”x 86” travels, Fanuc 31i control, new 2012
KURAKI (KBT 1103) 4.3", 55"x78" travel, 50tpr, built in rotary, new 1981
TOS (WHQ13.8 CNC) 5.12", (2008) 40 ATC, 98”x138” travels, CTS, 3000rpm, Fanuc 31i control, nice
TOS (W100A) (2013) Remanufactured, 50 tpr spndl, factory rebuilt to new tolerance, 5-axis Heidenhain DRO
BORING MILLS, VERT
G&L 60" CNC, 60” tbl, 12 ATC, live tools, Refurbished 2009, Fanuc 21i ctl
G&L 72" CNC, 60” tbl, 12 ATC, live tools, Refurbished 2009, Fanuc 21i ctl
DRILLS, RADIAL
SOROLUCE (TR-1600) 2.5" cap 5’ drill, very nice runner
MAS (VR 8A x 2500) 3" cap
HONES
TOS (FSS 80) Bed type,CNC, Heidenhain 426 ctl, new 1998
SAWS, BAND, VERTICAL
MARVEL (81/12) 45 deg tilt, new 2003
MISCELLANEOUS
Floor Plates 138"x78"x14", 4 available
New Cast Iron Angle Plates 12"x44" up to 32"x83"
50 plastic automotive skids, 45"x48" pallet, - 4 way pick up
Cast Iron Floor Plates, 138" x 78" x 14", 2 Available
Portable Drilling unit, CLIMAX, (KM 3000)
TOS Rotary Table (ISO 16) 86"x 86" 60" Travel, 17 Ton, Rotary & Linear DRO
SUNNEN (MBB-1800) w/ Sunnen tooling and tooling cabinet
LATHES, ENGINE
TOS WHN 13.8 •
CNC HBM •
ENTERPRISE 20"x 120"
POREBA (TCG 160) 63"x 393" As New!
LATHES, N/C & CNC
CINCINNATI (2220U) Refurbished 2009, Fanuc 21iT control, 18” chuck, 120” c.c., SMW steady
MORI SEIKI (SL-6) CNC, 50hp motor, Fanuc 6T control, 15"chk, new 1981
MACHINING CTRS, HORZ
NIIGATA (HN 80 FC) 32"x 32" pallets Fanuc 11m control, 6 pallet pool, built in facing head and in/out spindle
movement for boring mill applications, 120 ATC, new 1992
MACHINING CTRS, VERT
MAKINO, Graphite Machine (SNC-86) Fanuc 15M ctl, 30 ATC, dust collector, new 1991
DMG (DMU 50T) New 2004, 3+2 axis, Heidenhain i530 control
7055 Auburn Rd., Milton, ON L9T 7V9
Ph: (905) 876-0890 Fax: (905) 876-1959
P6100 PRESSES, OBI
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
60 Ton BROWN BOGGS, 17 1/2J, 5" stk, A/C, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton WARCO, , Air clutch & Brake, 39"x 30", 0.8"stroke,
35spm, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch w/air
assist, (Brighton Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
P7100 PRESSES, STRAIGHT SIDE
800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,
20-40spm, Like New!, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9275 PUNCHES, TURRET
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, Trumatic 2010R (2002), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,
Ref# 9851, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,
50"x 100", Ref# 9933, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, Trumatic 2010 (2002), Bosch Type 3, Ref#
9956, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
PAGE22
22
Page
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW
Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, EM 2510NT (2004), 45sta, 4a/i, Ref# 9614,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
22 Ton TRUMPF, TC2000R Bosch Type3 (1999), MultiTool, Ref#
9936, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (1998), Fanuc 18P, 3a/I, MP1225NJ
(2004), Ref# 10005, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, EM2510NT, ASR 6510M Load/unload, AMNC
BT, Instlld 2010, Ref# 10018, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 2510 King (1999), Fanuc 18P, Ref#
9997, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
22 Ton MURATEC WIEDEMANN, C2500 (1997), 4 a/i, 12
Station multi-tool, (ECCO Machinery Tel: 877-513-1773,
Fax: 778-298-2024)
27.5 Ton TRUMPF, TC5000R-1300 (2005), Sheetmaster,
Tooling, Quick sharp, Quick set, Ref# 9584, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, Pega 345Q (2000), Fanuc O4PC, 58 Sta, 2a/i,
Ref# 9344, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 367 Queen (2000), Fanuc 18P, 58 Sta,
2a/i, Ref# 9849, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 358 KingII (2000), Fanuc 18P, 4a/i, Ref#
9922, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (1986), Fanuc 6M CNC, 58Sta, 2 A/I,
Ref# 9937, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2a/i, Ref#
10007, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 367 (1992), O4PC, 60"x 72", 44 Sta, 2a/i,
Ref# 9987, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (1992), Fanuc 18P, 40 Sta, 2a/i, Thin
style, Ref# 10002, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 357 Queen (1996), Fanuc O4PC &
PHNC, 58 Sta, 2 a/i, Ref# 10049, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC
control, Ref# 9963, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros III 3510NT (2004), 58 Sta, 4a/i, Ref#
9920, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, EMK3610NT AMNC-F (2008), 60"x 100", Ref#
10069, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
55 Ton AMADA, Coma 567 (1994), w/Fanuc O4PC, 44 sta, 2a/i,
Ref# 10016, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
R4704 ROLLS, ANGLE BENDING
AKYAPAK, APK-61 (2007), Angle roll and profile and pipe
bending, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
2"x 2"x 3/16" “NEW” TAURING, SAF DS 50HV, Hydraulic,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
4"x 4"x 3/8" Profile Roll, , Hyd. Side guides, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
R5603 ROLLS, PLATE BENDING
1/4"x 5’ AKYAPAK, , Mechanical, 3 rollers, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
CLUE,
2014
Clue June,
July, 2014
R5603 ROLLS, PLATE BENDING
Z9000 MISCELLANEOUS
PRICED FOR A
QUICK SALE
CNC lathe Hardinge Quest 51
with C Axis and Live tools 8000 rpm, Fanuc 21-IT
Let us design your ad.
ES:
SERVIC
OTHER
nt
velopme
• Web de esign
• Logo D esign
re D
• Brochu esign
il
• Ema D
CALL TODAY!
905-528-7765
[email protected]
"SAMPLES AVAILABLE"
1/4"x 8’ , 4 Roll standard, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
1/2"x 10’ AKYAPAK, , Hydraulic, 4 rollers, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
1/2"x 10’ ROUNDO, PS255 (1997), Ref# 9957, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
R5605 ROLLS, PLATE BENDING, INIT.
PINCH
1/2"x 10’ ROUNDO, (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
S0403 SANDERS
36" TIMESAVER, No.137-IHD, Wet type Sander, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
S0653 SAWS, BAND, HORIZONTAL
13"x 18" HYD-MECH, S-20, Swivel, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 23
13"x 18" WAYTRAIN, , fully auto, swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
13"x 18" HYD-MECH, S-20, Swivel head, manual, (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
14"x 14" BIGSTONE, CF-360AW, Fully automatic, (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
16"x 18" HYD-MECH, S23, Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
16"x 18" HYD-MECH, S-23, Swivel head, manual, (B W Guild
Equipment Inc Tel: 519-624-9806, Fax: 519-893-3125)
18"x 24" WAYTRAIN, , fully auto, swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
18"x 24" WAYTRAIN, , semi auto, double swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
CLUE,
May2014
2010
Clue
July,
$74,500
Year 2002 with only 2100 hrs cutting time, 24’’ Swing,
12’’x 23’’ turning cap. , 60-6000 rpm. Paid new $285,000
including $80,000 of VDI Holders - live tools - Collets.
Contact: Gilles Lupien
Phone: (819) 478-5266
Email: [email protected]
S0690 SAWS, BAND, VERTICAL
20" Throat T-JAW, No.500, w/ Blade welder, Shear & Grinder,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
14"x 21" DoALL, TF-14X21, 32"x 36" table, 5hp, vertical tilting
frame, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
S0948 SAWS, MISCELLANEOUS
4"x 10" Circular Saw, , Fully auto, Blade 14" feed length up to
48", (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 23
S4105 SHEARS, POWER SQUARING
1/8"x 10’ ACCURSHEAR, , Hyd, motorized BG, DRO, call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
10ga x 48" TECHNOIMPEX, , (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
1/4"x 10’ “NEW” FERRIC, 3100 x 6, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
1/4"x 10’ PROMECAM, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4" x 10’ AMADA, M3060 (2000), Programmable BG,
Pneumatic Sheet Supports, Ref# 9931, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
1/4"x 10’ HACO, , CNC Back gauge, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
1/4"x 10’ DURMA, SB3006NT (2007), Hydraulic, ENC100, Ref#
9924, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
1/4"x 12’ CINCINNATI, 1812 (1967), FOPBG, Ref# 9942,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
1/4"x 13.5’ “NEW” FERRIC, 4100 x 6, w/Sheet support system,
auto Back gauge, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
Cell: (819) 473-2902
Website: www.machinerygl.com
3/8"x 10’ PROMECAM, , Hyd Shear, FOPBG, Spare blades,
Good cond., Great price., (B W Guild Equipment Inc
Tel: 519-624-9806, Fax: 519-893-3125)
3/8"x 14’ ALLSTEEL, , Mot Backgauge, under power in
Montreal., (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
1/2" x 10’ “NEW” FERRIC, 3100 x 13, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
3/4"x 10’ ALLSTEEL, , Hyd, motorized BG, Rake & gap, call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
See Page 21
T0140 TABLES, ROTARY
12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
W0760 WATER JET CUTTERS
48"x 48" FLOW, (1999), (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
48"x 96" FLOW, (1998), 25hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" FLOW, (2006), 100hp, 87000psi, (Stock Machine
Tools Co Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" OMAX, (2008), 40hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
LNS, , Barfeeds, Servo S2 & S3, Late models, w/Remote
pendant, Excellent, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
PAGE
21
Page 23
M A C H I N E R Y
CLUE MACHINERY ADVERTISER ONLINE
Over 6500 Names
• Reach more people faster
• Email over 6500 companies using CLUE’s
highly targeted industry list
• Save on the second blast
• Free Newsletter design for monthly mailings
Great for
Auctions
Single Machines
Multiple Machines
Plant Real Estate
EMAIL
BLAST
Call today: 905-528-7765 or email us at:
[email protected]
www.cluemachines.com
Page 24
Clue July, 2014
EQUIPMENT FOR SALE
LET US WORK FOR YOU
Trans-Canada Liquidations (TCL) has been in business
since 1958 and offers the following services:
AUCTION SALES: We conduct auction sales right across
Canada and have facilities in the USA. We will purchase any
type of manufacturing company for cash or sell on a
commission basis.
APPRAISALS: We have certified appraisers on staff who can
appraise all types of machinery and equipment; woodworking,
printing, chemicals, fabricating, tool & die, construction,
aircraft, foundries, etc...(in the strictest confidence).
LIQUIDATIONS: We are able to conduct all types of
Liquidation Sales, and can show you where more money can
be realized. Complete liquidation is assured; our efficient
organization enables us to handle numerous sales a week.
MERGERS & ACQUISITIONS: There is a separate
department for Mergers and Acquisitions, and we have been
very successful in buying and selling both ongoing and
bankrupt companies for clients. We represent various groups
interested in purchasing manufacturing businesses.
Our clients are Federal and Provincial Governments,
Financial Institutions, Chartered Accountants, Trustees in
Bankruptcies and Private Corporations.
No proposition is too large to arouse our interest. The next
time you have a plant with an uncertain future... get in touch
with TCL for fast action.
•
•
•
•
•
•
•
•
•
•
Contact: NORM JACOBS
Tel: 416-736-1367 or Fax: 416-736-4159
Email: [email protected]
4610 Dufferin Street, Suite 209
Toronto, Ontario, Canada M3H 5S4
www.ManagingYourAssets.com
TCL Asset Group Inc.
WE APPRAISE • WE LIQUIDATE • WE AUCTION
Vittoria Whole Coffee Bean Roasting Line
Oil Spill Clean-Up Equipment (Large Quantity)
Soup Cup Filling & Packaging Line
Invasix RF & Vectra 3D Imaging Equipment
Abaxis Veterinary Blood Analyzers
Motic Digital Laboratory Microscopes
OptiTrack Motion Capture Suite
Late Model Fork Lift Trucks
Auto Shop Equipment
Modine Gas Unit Heaters
WE APPRAISE • WE LIQUIDATE • WE AUCTION
TCL Asset Group Inc.
4610 Dufferin Street, Suite 209
Toronto, Ontario, Canada M3H 5S4
Telephone: (416) 736-1367
Fax: (416) 736-4159
Email: [email protected]
WWW.MANAGINGYOURASSETS.COM
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3
Tel: (905) 738-8730
Fax: (905) 738-5148
e-mail: [email protected]
website:www.sabito.com
CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES
Late Model, Pre-owned, CNC Machine Tools.
MACHINING CENTRES, VERT
WASINO, LJ-63M (1988)
DMG, DMU, 60T CNC (2002)
MATSUURA, MC-800 VF CNC (1995)
MONARCH, VMC-45 CNC (1989)
LEADWELL, MCV 760 XL
HERMLE, C800U (2001), 5-axis
OKUMA, MC-4VA (1984)
MATSUURA, ES-800, CNC (2005)
BORING MILL, HORZ
5" G & L, 450 Series MC50 Table Type, Fanuc CNC
GRINDERS, SURFACE
10" x 24" THOMPSON
20" X 48" KARSTENS K29 Universal CNC Grinder
OTHER CNC MACHINES
MACHINING CENTERS, HORZ
Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
Co-ordinate Measuring Machine, MITUTOYO, BRT 707
CNC Angle Rolls, TAURING, Alpha 40, 2"x 2"x 3/16"
CNC Woodworking Sizing System, SCHEER PA7000 (2002)
Coil Line, AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
Feeder, IEMCA Prodigy 547, 6ft bar length.mag cap 15.75"(3/16"-2")
Hydraulic Press Brake, 135T X 12FT ATLANTIC HD135-12-10
CNC Press Brake, 230 Ton x 13' ACCUPRESS Model 50235 Accell (2006)
DAEWOO, DMH 400 (2000)
MAZAK Integrex E-1060V/8II (2010)
MITSUBISHI, MH-50C, 20" x 20", 158 ATC (1989)
MACHINING CENTER, UNIV
HURCO C-40-U, 5 AXIS CNC (2004)
DECKEL MAHO, DMC 100 U, DouBlock 5-axis (2005)
CNC LATHES
TAKISAWA, TS-20, CNC
APPRAISAL SERVICES
Clue July, 2014
-
AMEA & USPAP CERTIFIED
Page 25
2783 Portland Dr. Oakville ON L6H 6M6
Tel: 905-829-1579
Email: [email protected]
Website: www.smtcl.com www.smtcl.ca
FACTORY OUTLET
VMC1000B – Vertical Machining Centre



Worktable: 1200 X 1500mm
X/Y/Z travel: 1000/610/650 mm
Spindle speed: 10000RMP
AH130 – Automatic Horizontal
Boring & Milling Machine
1
 Spindle Diameter: 5 ⁄8 in
 Worktable: 1800 x 1600mm

X/Y/Z travel:
2000/1800/2000mm
HTC2050 – Horizontal Turning centre





Max swing diameter: 480mm
Max cutting length: 500mm
Max cutting diameter: 280/300mm
Spindle Bore: 62mm
Chuck diameter: 8”
HTC2050 – Horizontal Turning Centre
HTC2050 – Horizontal Turning Centre
VMC1600
Vertical Machining Centre
Page 26
ETC Series
Options for Flat Bed/ Slant Bed
GTC250110
Gantry Type CNC
Milling Boring Machine
Clue July, 2014
WEBCASTS POWERED BY:
TRUE NORTH HARDWARE PLYWOOD INC.
MAjOR 1500 LOT SALE! LARgEST WOODWORkINg EvENT Of THE YEAR!
Thursday, August 7, 2014 • 10:00 A.M. EDT • 4 Boisvert Crescent, Cochrane, ON, CANADA P0L 1C0
magnetic chuck
COMPLETE PLYWOOD MILL, FINISHING DEPARTMENTS, VENEER LINES, SAWING & SANDING
LINES, CHIPPING, MAINTENANCE & STORES! ALSO FEATuRING A COMPLETE MACHINE SHOP
CONSISTING OF: LATHES, MILLS, SAWS, IRONWORkERS, WELDERS, GRINDERS & MuCH MORE!
10+ aVaiLaBLe
COMPLETE kNIFE GRINDING DEPARTMENT; (2) glue spreading lines; (2) FORANO 82” & 58” 200HP chippers; 200HP, 50HP & 40HP wood hogs; LARGE
OFFERING OF DuST COLLECTORS, CHIP DELIVERY SYSTEMS & BLOWERS; PETTIBONE & (2) VOLVO wheel loaders with hydraulic grapples; DODGE
(2010) RAM 1500 truck; FORD F-350 XLT service truck; FORD F-150 truck; (10+) TOYOTA LPG forklifts; GEHL skid steer; CASE skid steer; GENIE, JLG &
SkYJACk man lifts; (6) COMPAIR air comps up to 60HP & dryers; LARGE MuLTI-MILLION DOLLAR STORES INVENTORY; LARGE OFFERING OF
SPARE PARTS, ACCESSORIES & WOOD LOG INVENTORY; HuGE SCRAP OPPORTuNITY CONSISTING OF: miles of heavy chain conveyor, stacking
and delivery systems, HuGE MOTOR INVENTORY, miles of copper cable, scrap machinery and yard equip, huge transformers & switchgear & MuCH MORE!
1500 LOT SALE!
MINE jEffREY INC.
COMPLETE HEAvY MAINTENANCE DIvISION Of A LARgE CANADIAN MINE
August TBD • 10:00 A.M. EDT • 111 Boulevard Saint-Luc, Asbestos, QC, CANADA J1T 2V1
TACCHI FTD/C “1520” heavy duty gap bed engine lathe with 4-WAY bed, 128”/148” swing over bed, 204” centers, 9.5” spindle bore, 59” 4-jaw chuck; (10+) engine
lathes with swings up to 36”, and centers up to 192”; kEARNS RICHARDS SH75 3” table type HBM; WEBSTER & BENNET 48” VTL; LANDIS 20R threading machine with .25” to 2.5” capacity; BERTRAM horiz planer with 44” x 312” table, (2) swivel vertical heads, (2) swivel horizontal heads; (2) 5’ & 4’ radial arm drills; MITTS &
MERRILL hyd keyseater; SNOW 15” x 72” rotary surface grinder; HP 300 TON horiz hyd wheel press; (5+) hyd shop presses; (5+) saws; IRD digital dynamic balancer;
MICRO-POISE dynamic rotary balancing machine; ALLSTEEL 10’ x 1/4” hyd shear; ALLSTEEL 120 ton x 12’ hyd brake press; TRuMPF C-frame curve, cutting and
nibbling shear; PuLLMAX universal nibbler; (5) angle and plate rolls up to ½” cap; (30+) welders and power supplies; (4) welding positioners; P&H T350, 35 ton mobile
crane; (2) PETTIBONE 23.5 & 20 ton mobile cranes; (10) indoor & outdoor forklifts up to 30,000lb cap; INTERNATIONAL flatbed service truck; (2) TENNANT floor
sweepers; (4) 5 ton overhead crane systems; (8) MuNCk 2 TON 16’ jib cranes with power 360 rotation; (50+) jib cranes from 1-5 ton cap; EACO 500 TON C-frame
wire crimper; (5+) dust collectors; (400+) sections shelving; (15+) drill presses; (10+) grinders; (50+) rolling tool carts; (25+) 4’ x 8’ up to 2” thick steel welding tables;
(25+) heavy storage cabinets; (50+) indexing cabinets with huge assortment of fastening hardware; jacks up to 150 ton with power packs; HuGE SPARE PARTS
INVENTORY & RAW MATERIAL INVENTORY; CAT & kOMATSu spares; machine shops, factory equipment, perishable tooling, cafeteria & MuCH MORE!
Clue July, 2014
Page 27
M A C H I N E R Y
899 Danforth Place
Burlington, ON L7T 1S1
Phone: 905-528-7765
Fax: 905-917-0222
Y. Franke & Company, LLC.
3 Golf Center, Suite 371
Hoffman Estates, IL 60169
P: 847-874-8972
Specialists in 5-Axis Machining Centers
www.yfranke.com
[email protected]
INSPECT UNDER POWER ON OUR FLOOR!
1997 DMG DECKEL MAHO DMU60P
5-Axis Simultaneous Universal Machining Center:
■ Heidenhain TNC426PB Control
■ X23.6” Y27.6” Z21.7”, 24.8” Dia. Trunion Table
■ Auto Swivel Head for both horiz./vert. machining
■ CAT40, 20 hp, 12,000 rpm
■ 60 ATC, Glass Scales
■ Certified with Renishaw ballbar test
2004 DMG DECKEL MAHO DMC60T
5-Axis Simultaneous Universal Machining Center:
■ Millplus iT Control
■ X30.7" Y22" Z22"
■ B-Axis Swivel Head with 150° swivel range
■ CAT40, 37.5 hp, 18,000 rpm
■ 60 ATC, Glass Scales, 580 PSI CTS, Laser, Probe
■ 2-Station Automatic Pallet Changer
1999 DMG DECKEL MAHO DMU80P
5-Axis Simultaneous Universal Machining Center:
■ Millplus Control
■ X31.5" Y27.6" Z23.6", 24.8" Dia. Trunnion Table
■ Auto Swivel Head for both Horiz/Vert machining
■ CAT40, 20hp, 12,000 rpm
■ 60 ATC, Glass Scales, 580 PSI CTS, Probe
■ Certified with Renishaw ballbar test
2001 DMG DECKEL MAHO DMU80P hi-dyn,
5-Axis Simultaneous Universal Machining Center:
■ Heidenhain TNC430 Control
■ X31.5” Y27.6” Z23.6”, 24.8” Dia. Trunnion Table
■ Auto Swivel Head for both horiz./vert. machining
■ HSK63A, 37.5 hp, 12,000 rpm
■ 60 ATC, Glass Scales, 580 PSI CTS, Laser, Probe
■ Certified with Renishaw ballbar test
A Franke Family Tradition Since 1981
Page 28
Clue July, 2014
View complete details and request a quote for these machines on our website.

Similar documents

October Issue 2012 - PDF - Used Cnc Machines Canada | Cnc

October Issue 2012 - PDF - Used Cnc Machines Canada | Cnc WE BUY SINGLE MACHINES OR COMPLETE PLANTS Clue October, 2012

More information

2015 Fall Flyer - Gerlinger Steel and Supply

2015 Fall Flyer - Gerlinger Steel and Supply F 2" x 2" x 1/4" Cole-Tuve ARS-2.2 Angle roll—1ph—1 Speed F 2" x 2" x 1/4" Cole-Tuve ARS-2.2 angle roll—3ph—2 Speed F 3" x 3" x 1/4" Cole Tuve ARS-3 Angle Roll 3" x 3" x 3/8" Z31 Pullmax Angle/Stru...

More information

Oct - Industrial Machine Trader

Oct - Industrial Machine Trader 33 Ton, AMADA, APELIO 367V 2000 WATT LASER, 2KW, FANUC 16LB, NEW 1998   Our stock number: 7913

More information

maxcut machine tools - Used Cnc Machines Canada | Cnc Machine

maxcut machine tools - Used Cnc Machines Canada | Cnc Machine STRIPPIT, FC1000R (1994), Fanuc Control AMADA, Pega 357 (1992), Excellent Condition

More information