Madill Log Loader

2850c
Madill Log Loader
The Madill 2850C is a rugged and reliable purpose built logging machine.
It is powered by a Cummins QSC 8.3 Litre, 300 HP engine and is equipped with a
D7HD excavator rail undercarriage. This state-of-the-art forest machine provides
both reliability and durability for the most demanding logging environments. The
2850C is backed by a full warranty and parts support to guarantee increased
operational hours and higher productivity in the field.
Brightwater
Free Phone
Phone
Email
Website 0508 427 4448
+64 03 543 5325
[email protected]
www.brightwater.co.nz
Madill is an Official
Brightwater Licenced Product
2850C
Madill Log Loader
2850C Specifications
Engine
Cummins QSC Tier III 8.3 Litre, 300 HP
@ 2,200 RPM
Radiator
& Oil Cooler
1.35sqm high capacity side by side radiator
charge air and oil cooler
Electrical
24 volt 70 amp alternator, 2 - 8D batteries,
8 halogen lights
Hydraulic
Pumps
Rexroth variable displacement piston pump,
600 L/min 4,500 PSI operating pressure, pilot
pump and grapple rotation pump on engine
Valve
Linde Synchron load sense valve provides
tuneable multi function capability
Filters
10 Micron return filters mounted in hydraulic
tank, 80 mesh suction screen
Speed
2 speed to 5kph
Fuel Tank
Rear mounted Fuel/Oil Tank, capacity:
Fuel - 800L, Oil - 375L
Boom
Boom
Madill formed plate boom, guards on stick and
boom cylinders
Boom Reach
Butt N Top Maximum reach 10,700mm
Heel Boom Maximum reach 12,400mm
Boom Gross Lift
4,600mm-17,700kg, 6,100mm-15,400kg
7,600mm-11,000kg, 9,100mm-9,300kg
10,700mm-7,200kg
Boom Cylinders
KYB : Boom - Ø 150mm
KYB : Stick - Ø 170mm
Tool - Ø 127mm
Weights & Dimensions
Weight
40,400kg with attachment
G.P
9.0 PSI
Counterweight
6,100kg
Undercarriage
D7HD, 5,200mm long x 3,600mm wide, 760mm
double grouser shoes 9 Excavator rollers per
side, top track slides, ski type rock guards
Carbody
Clearance
760mm
Track
Dimensions
3,600mm wide x 5,200mm long
Tractive
Effort
35,000kg
Tailswing
3,060mm
Image: Madill 2850C with Butt N Top
House & Cab
House
Single piece hydraulically raised house c/w
tube frame, punched plate grilles, easy access
stairway
Cab
Madill 1,170mm rear entry cab, high visibility
with bronze tint Lexan floor and side windows,
marguard front window, tilt open left hand
window, air ride heated seat, arm rests and
joystick controls, 16Kw heater, 10Kw air
conditioner, emergency exit, dual wipers,
AM/FM radio/CD player, DDEC V engine monitor
and diagnostic system
Cab Riser
Forward sloped for good visibility, 4,300mm eye
level, hydraulic tilt for moving
Swing Mechanisms
Swing Bearing
1,520mm
Swing Drive
Twin L & S planetary with adjustable free swing
Swing Speed
7.5 RPM
Swing Torque
138,000 Nm
Full Reach 11,000mm
2800B 4,800mm
2850B 5,200mm
Diagram: Madill 2850C with Butt N Top
As all Madill product is subject to a continuous improvement program, specifications may change without prior notice.