RAK-S

Transcription

RAK-S
filtering units - welding fumes - RAK-S
RAK-X-M/1-S
RAK-1-M/2-S
RAK-2-M/3-S
Application
Operational Use
RAK-S-type appliance has been developed for cleaning the air from
welding fumes arising at mobile or stationary workplaces. The device
is efficient in capturing the dry, as well as viscous dusts, that arise
during welding the oil-laden steel sheet and while using the antispattering liquids in large amounts. The device is not equipped with
a waste container to collect impurities. Those are captured within
the structure of the compact filter, being the basic filtering element
in the device. Additionally, there is also a spunbond filter, absorbing
the part of gaseous contamination. At the moment the filters reach
the extreme pollution degree, replace them for new – they cannot be
submit to regeneration.
Structure
Mobile version (RAK-M) is designed for installation of extraction
arms on its top cover. Stationary – wall-mounted version (RAK-H)
extraction arms have to be installed at the housing bottom. The
device is manufactured in three sizes, adapted for installing of
one, two or three extraction arms of Ø160 mm diameter and of
2- or 3-metre-workrange. The appliance is operated by means of a
control unit. In the mobile version, the control unit is built-in on the
housing, whereas for the stationary version, the control unit has to be
installed, in a convenient place chosen by User.
Periodical maintenance of the filter consists in:
• periodical cleaning the pre-filter of wire-mesh,
• periodical replacement of the filtering pad and the carbon
spunbond (every several months),
RAK consists of subsequent elements:
• steel housing,
• periodical replacement of the compact filter (period depends on
the intensity of use).
• radial fan,
* On demand we deliver RAK-S filtering units equipped with
a pressure control that indicates the replacement necessity of
the compact filter (signal lamp).
• pre-filter – wire mesh of 0,8x0,25 mm holes,
• filtering pad – class G-3,
• compact filter – class F-9,
• active carbon impregnated spunbond filter,
• control unit,
• castor assembly for the mobile version, or a set of brackets for the
wall mounted version.
Technical data
Type
Part No.
RAK-X-M/1-S
800O37
RAK-1-M/2-S
800O38
RAK-1-H/2-S
800O39
RAK-2-M/3-S
Volume flow
[m3/h]
Maximum
vacuum
[Pa]
Supply
voltage
[V]
Motor rate
[kW]
2350
2600
230
2500
2000
230
800O40
3050
2250
3 × 400
RAK-2-H/3-S
800O41
Caution: 1. Volume flow has been measured at the clean filters.
2. Full presentation of the ERGO extraction arms is on separate catalogue cards.
104
Acoustic pressure level
[dB(A)] from distance
Weight
[kg]
Quantity of the
connections for
ERGO arms
1m
5m
1,1
74
70
115
1
1,1
71
68
165
2
1,5
71
68
210
3
filtering units - welding fumes - RAK-S
Flow charts
RAK-1-M/2-S
2000
1800
1600
internal resistances
of the device
1400
1200
1000
800
2200
2000
fan pressure in function
of volume flow
1800
1600
1400
1200
internal resistances
of the device
1000
800
disposable pressure in
function of volume flow
400
400
0
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
Volume flow [m³/h]
0
2250
fan pressure in function
of volume flow
2000
1750
1500
internal resistances
of the device
1250
1000
disposable pressure in
function of volume flow
500
250
200
200
2500
750
600
disposable pressure in
function of volume flow
600
0
RAK-2-M/3-S
Static pressure [Pa]
fan pressure in function
of volume flow
Static pressure [Pa]
Static pressure [Pa]
RAK-X-M/1-S
0
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
0
0
250
500
750
1000 1250 1500 1750 2000 2250 2500 2750 3000 3250
Volume flow [m³/h]
Volume flow [m³/h]
mobile versions
RAK-X-M/1-S
bottom view
front view
1 ferrvle Ø 160
RAK-1-M/2-S
front view
bottom view
1 ferrvles Ø 160
105
filtering units - welding fumes - RAK-S
RAK-2-M/3-S
bottom view
front view
3 ferrvles Ø 160
hanging versions
RAK-1-H/2-S
front view
top view
bottom view
2 ferrvles Ø 160
RAK-2-H/3-S
front view
top view
bottom view
3 ferrvles Ø 160
106
filtering units - welding fumes - RAK-S
Replaceable filters
Compact filter
Type
Part No.
Weight [kg]
Dimensions AxBxC [mm]
FKR-X
838K12
17,72
610X548X292
FKR-1
838K09
22,14
762X610X292
FKR-2
838K11
18,20
910X420X292
Class
Filtration efficiency [%]
F9
95,6
Remarks
1 pc in RAK-X
1 pc in RAK-1
2 pc in RAK-2
Filtration pad
Type
Part No.
Weight [kg]
Dimensions AxBxC [mm]
FWR-X
838F72
0,18
610x548x50
FWR-1
838F72
0,20
762x610x50
FWR-2
838F68
0,25
910x840x50
Klasa
Filtration efficiency [%]
Remarks
G3
88
In each device
is placed one filtration
pad.
Active carbon impregnated spunbond
Type
Part No.
Weight [kg]
Dimensions AxBxC [mm]
FCR-X
838F74
0,30
610X548X50
FCR-1
838F69
0,32
762X610X50
FCR-2
838F70
0,50
910X840X50
Remarks
In each device is placed one spunbond format.
107