300-101-Exam-Dumps

Actual Cisco 300-101 Exam Dumps Updated 2019
20% Discount on Cisco 300-101 Exam Dumps. For more info https://www.dumps4success.com/300101.html
Cisco Implementing Cisco IP Routing Exam 300-101 preparation is not a piece of cake for the
professionals or full-time office workers as you actually need to invest time and mind for its preparation.
No doubt EN is very effort taking and difficult exam but it is not impossible to clear it. Dumps4Success
offers Cisco Implementing Cisco IP Routing Exam 300-101 exam dumps that includes guidelines and
information according to the Cisco 300-101 exam. The Cisco Implementing Cisco IP Routing Exam 300101 exam dumps involve content and instructions which are explicitly designed to assist you in getting
through the 300-101 exam.
The 300-101 Cisco Implementing Cisco IP Routing Exam exam practice material includes everything that
covers the Cisco course content and prepares the candidate for all the possibilities in the future. It
includes study material, a pattern of Cisco Implementing Cisco IP Routing Exam 300-101 exam, sample
question papers and tips to make the Cisco Implementing Cisco IP Routing Exam journey successful for
you. We hope that you’ll find our services very useful for your upcoming exam.
300-101 Exam Preparation Material For Best
Result:
Our Cisco Implementing Cisco IP Routing Exam 300-101 exam dumps has been designed to enlighten the
candidate about the whole thing. We make it sure that candidate is well aware of Cisco Implementing
Cisco IP Routing Exam 300-101 exam scope. The whole plan focuses on the preparation and guidance of
a candidate until they are satisfied. The Cisco Implementing Cisco IP Routing Exam 300-101 exam dumps
includes all the important areas which you need to focus on if you want to get Cisco certification.
Dumps4Success believes that the student deserves to know every challenge regarding Cisco
Implementing Cisco IP Routing Exam 300-101 exam which he/she has to face in future. If we
acknowledge everything clearly in the start then it becomes easy for the candidate to prepare himself.
100 % Success Cisco 300-101 Exam Dumps:
The 300-101 exam is prepared by experts who have been in this field for years. They are well aware of
the pattern of exam and relevant study material. In fact, many of the writers have designed the Cisco
Implementing Cisco IP Routing Exam 300-101 themselves. They are expert in training a beginner to get
an adequate understanding of Cisco course outline. So, with the help of Dumps4Success guide, you are
very much likely to get Cisco certification in the first attempt.
https://www.dumps4success.com/
300-101 Cisco Implementing Cisco IP Routing
Exam Exam Quick Tips:
Many students rely on the internet for the preparation of Cisco Implementing Cisco IP Routing Exam 300101 exam. Well, you can get study materials from the internet but it is always the possibility that you are
missing out something. On the other hand Dumps4Success is offering you complete package in one deal.
You do not have to look into different websites and libraries to collect all the study material. You can get
everything just a click away with this guide. Rather than wasting your time & effort on finding different
sources for EN, you can just rely on our guidebook to assist you in every way.
100% Money Back Guarantee:
Dumps4Success cares about the candidate and want to facilitate them in every way. Although our plan
will help you in getting more than passing marks for Cisco 300-101 exam, if the candidate is unable to
pass the 300-101 exam after taking the sessions of our 300-101 exam dumps, then we can refund your
money under certain terms & conditions.
20% Discount on Cisco 300-101 Exam Dumps. For more info https://www.dumps4success.com/300101.html
https://www.dumps4success.com/
Version: 37.0
Question: 1
A network engineer is enabling RIPng on a new customer link. Under which configuration mode is RIPng
enabled?
A. Global
B. Router
C. Interface
D. IPv6
Answer: A
Question: 2
Which three algorithms can you configure with the ip cef load-sharing algorithm command?(choose
three)
A. per-packed
B. Tunnel
C. per-destination
D. Universal
E. Per-source
F. Include-port
Answer: BDF
Question: 3
How big is the smallest packet that will always be fragmented on a standard Ethernet network with
default configuration?
A. 1500 bytes
B. 1800 bytes
https://www.dumps4success.com/
C. 2048 bytes
D. 2100bytes
Answer: A
Question: 4
Where must a network engineer configure the ip helper-address command on a router?
A. On the interface that will receive the broadcast
B. On the interface that is closest to the destination DHCP server
C. On the global configuration mode
D. On the DHCP configuration
Answer: A
Question: 5
Which STP feature can reduce TCNs on ports that are connected to end devices?
A. BPDU guard
B. Root guard
C. PortFast
D. BackboneFast
Answer: C
Question: 6
Which protocol does VRF-Lite support?
A. IS-IS
B. ODR
C. EIGRP
D. IGRP
Answer: C
Question: 7
https://www.dumps4success.com/
What does stateful NAT64 do that stateless NAT64 does not do?
A. Stateful NAT64 maintains bindings of IPv4 to IPv6 link-local addresses.
B. Stateful NAT64 translates IPv4 to IPv6.
C. Stateful NAT64 translates IPv6 to IPv4.
D. Stateful NAT64 maintains bindings or session state while performing translation.
Answer: D
Question: 8
Refer to the exhibit.
You notice that traffic from R1 to the 192.168.10 0/24 network prefers the path through R3 instead of the
least-cost path through R2.What is the most likely reason for this route selection?
A. OSPF prefers external routes over interarea routes.
B. OSPF prefers interarea routes over intra-area routes.
C. OSPF prefers external routes over intra-area routes.
D. OSPF prefers intra-area routes over interarea routes
Answer: D
Question: 9
Which IP SLA operation can be used to simulate voice traffic on a network?
https://www.dumps4success.com/
CP connect
B. UDP-jitter
C. ICMP-echo
D. ICMP-jitter
Answer: B
Question: 10
Device R1 has 1 Gigabit and 10 Gigabit Ethernet interfaces, which command do you enter so that it takes
full advantage of OSPF costs?
A. R1(config router) #auto-cost reference-bandwidth 10000
B. R1(config route-map) #set metric 10000000000
C. R1(config if) #ip ospf cost 10000
D. R1(config router) #auto-cost reference-bandwidth 10000000000
E. R1(config if) #ip ospf cost 10000000000
F. R1(config route-map) #set metric 10000
Answer: A
Question: 11
Which three methods can a network engineer used to fix a metric-based routing loop in the
network?(choose three)
A. Filter routes manually using prefix lists
B. Implement proper network summarization on key routing points
C. Utilize route database filters
D. Filter routes based on tags
E. Implement offset lists at network boundaries
F. Filter routes manually using distribute lists
Answer: D, E, F
Question: 12
Which two statements about OSPFv3 are true?(choose two)
A. The router ID is configured as an IPv6 address.
B. It uses loopback IPv6 addresses to form neighbor relationships.
C. The router ID is configured as an IPv4 address.
D. It uses LSA type 6 for intra-area prefixes.
E. It is backwards-compatible with OSPFv2 through the use of sham link.
https://www.dumps4success.com/
F. It uses link-local addresses to form neighbor relationships.
Answer: C, F
https://www.dumps4success.com/
Question: 13
13. Which two features are provided by EIGRP for IPv6?(choose two)
A. Backbone areas
B. SPF algorithm
C. Partial updates
D. Area border router
E. Scaling
Answer: C, E
Question: 14
DRAG DROP
Drag and Drop the AAA features from the left onto the correct description on the right
Select and Place:
Answer:
Question: 15
https://www.dumps4success.com/
Which two causes of latency are true?(choose two)
A. High bandwidth on a link
C. Split horizon
D. Propagation delay
E. Serialization delay
F. Under-utilization of a link
Answer: C, E
Question: 16
Refer to the exhibit.
A user calls from another branch office with a request to establish a simple VPN tunnel to test a new
router's tunneling capability. Based on the configuration in the exhibit, which type of tunnel was
configured?
A. IPsec site-to -site
B. 6to4
C. PPTP
D. EZVPN
Answer: B
Question: 17
Which two statements about NAT in a DMVPN environment are true?(choose two)
A. A hub router can be behind a dynamic NAT on a device.
https://www.dumps4success.com/
B. Spoke routers can reside only on the public side of a NAT device.
C. Two spokes can establish session among themselves using PAT behind different devices.
D. A spoke router can be represented by a static NAT on a device.
E. A hub router can use static NAT for its public IP address.
Answer: D, E
Question: 18
Which statement is true about an edge interface in relation to the Cisco Easy Virtual Network?
A. An edge interface is used to differentiate VRF instances.
B. An edge interface connects to end devices such as hosts and servers that are VRF-aware.
C. An edge interface connects a user device to the EVN while defining the EVN boundaries.
D. An edge interface is configured using the vnet trunk command under the switched virtual interface.
Answer: C
Question: 19
When a new PC is connected to the network, which step must it take first to receive a DHCP address?
A. It sends a DHCPHELLO message to the DHCP server IP address.
B. It sends a DHCPREQUEST message to the DHCP server IP address.
C. It sends a DHCPREQUEST message to 255.255.255.255.
D. It sends a DHCPDISCOVER message to 255.255.255.255.
Answer: D
Question: 20
How can you minimize unicast flooding in a network?
A. Configure HSRP on two routers, with one subnet preferred on the first router and different subnet
preferred on the second router.
B. Set the router's ARP timeout value to be the same as the timeout value for Layer forwarding table
entries.
C. Set the router's ARP timeout value to greater than the timeout value for Layer 2 forwarding table
entries.
D. Set the router's ARP timeout value to less than the timeout value for Layer 2 forwarding table entries.
Answer: B
https://www.dumps4success.com/
Question: 21
Which protocol can you use to remotely install an IOS image on a Cisco switch?
A. SFTP
B. NetFlow
C. FTP
D. SNMP
Answer: C
Question: 22
Which is the minimum privilege level to allow a user to execute all user-level commands but prohibits
enable-level commands by default?
A. level 0
B. level 1
C. level 14
D. level 15
E. level 16
Answer: B
Question: 23
Which two features were added in MSCHAP version 2?(choose 2)
A. Mutual authentication between peers.
B. Using the MD5 hash for stronger security
C. Using three-way handshakes for authentication.
D. Ability to change an expired password
E. Backward-compatibility with MSCHAP version 1.
Answer: A, D
Question: 24
DRAG DROP
Drag and drop the statement about device security from the left on the correct features on the right.
https://www.dumps4success.com/
Answer:
Question: 25
Which two tasks does a DHCP relay agent perform?(Choose two)
A. It forwards DHCPOFFER and DHCPCOMPLETE messages to the DHCP client.
B. It forwards DHCPDISCOVER and DHCPREQUEST messages to the DHCP server
C. It forwards DHCPHELLO and DHCPREQUEST messages to the DHCP server.
D. It forwards DHCPREQUEST and DHCPACK messages to the DHCP server!
https://www.dumps4success.com/
E. It forwards DHCPOFFER and DHCPACK messages to the DHCP client.
Answer: B, E
https://www.dumps4success.com/
Thank You for trying 300-101 PDF Demo
To try our 300-101 practice exam software visit link below
https://www.dumps4success.com/300-101.html
Start Your 300-101 Preparation
20OFF
” for special 20%
[Limited Time Offer] Use Coupon “
discount on your purchase. Test your 300-101 preparation with actual
exam questions.
https://www.dumps4success.com/